M12 Inductive DC Proximity Switches M New od els AM1/AM6 Compact inductive proximity switches for DC operation ■ ø12 x 50mm and ø12 x 43.5mm ■ Shielded and unshielded models ■ IP67 nickel-plated brass housing ■ Short-circuit protection ■ LED status indicator 360˚ visible ■ 2 wire DC (AM1) ■ Additional cable exit options available ■ Nominal sensing range shielded 2mm ■ Unshielded 4mm ■ Long distance AM1 shielded 4mm ■ Unshielded 8mm 3 Year Guarantee Options and ordering codes AM1 / Standard proximity AM1 ø12mm short version AM6 NO output state AN – 1A 1 Shielded 2 Unshielded A Standard cable exit H M12 plug cable exit A NPN output type N PNP output type P 2 wire AM1 only O PRICE INFORMATION AND ORDERING Output circuit–wiring connections NPN output D PNP output BROWN 1 R BROWN 1 LOAD LED BLACK 4 C T Z OUT BLACK OUT (or 2 – see note Z below) BLUE LED R 4 (or 2 – see LOAD note below) D BLUE Normally closed output types UL approved models Other cable options: Right angle cable M8 Plug cable exit Customised cables Please contact IMO for price and availability C 3 3 NOTE: in case of combined load, i.e. resistive and capacitive, the maximum admissible capacity (C) is 0.05µF for maximum output voltage and current. Plug-pin connections (-) OUT M12 plug connector Cable exit option H NOTE: (pin connections): At present, all plug exit sensors have the output on pin 4. According to EEC Directives, the output of NC plug exit models will be changing to pin 2 (NO will remain on pin 4). A plug cable to match these NC sensors MUST be a 4-wire type as 3-wire cables are connected to pins 1, 3 and 4 (+) – contact IMO to check stock types. 4 3 1 2 Please see – Full specification page 321 Mounting brackets page 332 Connector leads page 330 (Out) See note below Dimensions (mm) 43.5 55 SW17 SW17 5 11 11 M12x1 40 35 ■ Shielded version (AM6/**1H model) ■ Unshielded version (AM6/**2H model) 50 SW17 65 SW17 LED 5 11 34 ■ Unshielded version (AM1/**2A model) LED 5 20 45 ■ Shielded version (AM1/**1H model) Standard cable exit Option A Cable: ø3.75mm, 2m length, 0.34mm2 conductor section, PVC material M12 metal plug cable exit Option H M12x1 M12x1 M12x1 LED M12x1 M12x1 M12x1 39 ■ Shielded version (AM1/**1A model) 65 SW17 LED 11 5 15 15 ■ Unshielded version (AM6/**2A model) 50 5 M12x1 5 27.5 32.5 ■ Shielded version (AM6/**1A model) SW17 LED M12x1 M12x1 M12x1 5 55 SW17 LED LED M12x1 43.5 LED 20 40 ■ Unshielded version (AM1/**2H model) 5