HRS DF1B-30S2.5DS

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
DF1B Series
■Features
1. New Insulation Displacement and Crimping Ideas
This connector is a new type to insert the ID contacts in the case. Using this
method, the following merits can be gained.
Cables with different current capacities
can be mixed in one case
ID terminal (AWG24, 26, 28)
Crimping contact (AWG20 to 30)
1 By using the ID contact and crimping contact together, different current
capacity cables can be mixed in one case.
2 After connection, the contact can be replaced in excellent maintainability.
3 Because the insulation displacement area is protected by the case, high
reliability can be assured.
4 Since the insulation displacement process can be performed only by
replacing the applicator of the existing crimping machine, no expensive
machine for insulation displacement is required.
2. Potting Header Available
Figure 1
Potting status
The high profile header is also available, corresponding to the board potting
process (sealed with resin) as waterproof measures.
3. Broad Variations
The single row and double row contacts are aligned for "Board to Cable" and
"In-line" series, respectively, while standard tin and gold plating products are
available.
(Refer to the applicable combination pattern on next page.)
■Applications
Figure 2
Business equipment, particularly including the copy machine and printer
B183
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS
products
have been discontinued,
or will
be discontinued
soon.
Please check
the Connection
products status on(Product
the Hirose website
RoHS search
at www.hirose-connectors.com,
DF1B
Series●2.5mm
Pitch
Connector
for
Discrete
Wire
Compliant
with
UL/CSA Standard) or contact your Hirose sales representative.
BApplicable Combination
K Single Row Type
Socket (Cable Side)
DF1B-*S-2.5R
Straight Through hole Type
Pin header
DF1B(Z)-*P-2.5DSA
Right angle Through hole Type
Pin header
DF1B(Z)-*P-2.5DS
Panel Mount Type
In-line plug (Cable side)
DF1BA-*EP-2.5RC
K Double Row Type
Socket (Cable Side)
DF1B-*DS-2.5RC
Straight Through hole Type
Pin header
DF1B(Z)-*DP-2.5DSA
Right angle Through hole Type
Pin header
DF1B(Z)-*DP-2.5DS
Panel Mount Type
In-line plug (Cable side)
DF1BA-*DEP-2.5RC
In-line Connection Product (Cable to Cable Connection) : Full Lock Type
K Single Row Type
Socket (Cable Side)
DF1B-*ES-2.5RC
In-line plug (Cable side)
DF1B-*EP-2.5RC
K Double Row Type
Socket (Cable Side)
DF1B-*DES-2.5RC
B184
In-line plug (Cable side)
DF1B-*DEP-2.5RC
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will
be discontinued
soon. Please Pitch
check theConnector
products statusfor
on Discrete
the Hirose website
search at www.hirose-connectors.com,
or contact
Hirose sales
representative.
DF1B
Series●2.5mm
WireRoHS
Connection
(Product Compliant
with your
UL/CSA
Standard)
■Product Specifications
Current rating
Rating
Cable Size
(Note1)
Voltage rating
AWG 20 to 24 : 3A
Operating Temperature Range
-35 to +85ç (Note2)
AWG 26
: 2A
Operating Moisture Range
-40 to 80%
AWG 28
: 1A
AWG 30
: 0.5A
Storage Temperature Range
-10 to +60ç (Note3)
Storage Moisture Range
-40 to 70% (Note3)
250V AC
■UL CSA Safety File No.
UL
: E52653
CSA : LR95109
UL-CSA Safety Standard Standardized Value
AWG 20 to 22: 3A
Current rating
Rating
Cable Size
(Note1)
AWG 24 to 28: 1A
AWG 30
Voltage rating
: 0.5A
30V AC
Item
Specification
Condition
1. Insulation Resistance
1000M ohms Min
500V DC
2. Withstanding voltage
No flashover or insulation breakdown.
650V AC/1 minute
3. Contact Resistance
30m ohms Max
100mA
4. Insertor/Extraction Force
MIN0.44N (45gf), MAX4.4N(450gf)
Measure at the square steel pin of 0.635±0.002mm
5. Vibration
No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
6. Humidity (Steady state) Contact resistance: 30m ohms max.Insulation resistance: 1000M ohms min. 96 hours at temperature of 40±2ç and humidity of 90% to 95%
7. Temperature Cycle
8. Operating Life
9. Resistance to Soldering heat
Contact resistance: 30m ohms max:Insulation resistance: 1000M ohms min.
Contact resistance: 30m ohms max.
No deformation of components affecting performance.
(-55ç: 30 minutes ➝ 5 to 35ç: 10 minutes
(-85ç: 30 minutes ➝ 5 to 35ç: 10 minutes) 5 cycles
Tin plating
: 30 cycles
Gold plating : 50 cycles
Flow: 250ç for 10 seconds
Manual soldering: 300ç for 3 seconds
Note 1: Current rating of header is 3A.
Note 2: Includes temperature rise caused by current flow.
Note 3: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a
specific part number shown.
■Material
Product
Part
Socket
Insulator
Polyamide
White
ID Contact for Socket
Contact
Phosphor copper
Tin plated or gold plated
Crimping Contact for Socket
Pin Header
In-line Plug
Material
Finish
Contact
Phosphor copper
Tin plated or gold plated
Insulator
Polyamide
White
Contact
Brass
Tin plated or gold plated
Insulator
Polyamide
White
Remarks
UL94V-0
––––––
––––––
UL94V-0
––––––
UL94V-0
ID Contact for In-line Plug
Contact
Phosphor copper
Tin plated or gold plated
––––––
Crimping Contact for In-line Plug
Contact
Phosphor copper
Tin plated or gold plated
––––––
B185
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS
products
have been discontinued,
or will
be discontinued
soon.
Please check
the Connection
products status on(Product
the Hirose website
RoHS search
at www.hirose-connectors.com,
DF1B
Series●2.5mm
Pitch
Connector
for
Discrete
Wire
Compliant
with
UL/CSA Standard) or contact your Hirose sales representative.
■Ordering Information
KConnector
DF1B
- * S 2.5 RC
q
q Series Name
w
e
t
r Contact Pitch: 2.5mm
e Connector Type
: DF 1B
w Number of Contacts
Single Row : 2 to 16, 18, 20
Double Row : 4 to 30, 34, 40
KSocket ID Contact
t Contact Type
S
: Single row socket
DS
: Double row socket
RC
P
: Single row pin header
DSA : Straight through hole
DP
: Double row pin header
ES
: Single row in-line socket
DS
: ID/crimping socket (Note)
: Right angle through hole
Note: The single row socket DF1B-*S-2.5R
DES
: Double row in-line socket
only adds "R" to the tail, which has
EP
: Single row in-line plug
the same meaning as "RC".
DEP
: Double row in-line plug
DF1B - R 24 F A
q
w
R
e
r
e Packaging Type
q 1. Connection Type
Blank : Bag
: ID
w Applicable Cable Size
F
: Reel
r Plating Type
24 : AWG24
26 : AWG26
Blank : Tin plated
28 : AWG28
A
KPlug ID Contact
: Gold plated
DF1B - 24 P R F
q
w
R
24 : AWG24
: ID
Blank : Bag
28 : AWG28
w Connector Type
KCrimping Contact
r
r Packaging Type
26 : AWG26
P
e
e Connection Type
q Applicable Cable Size
F
: Reel
: Plug
DF1B - 2428 SCF A
q
q Applicable Cable Size
w
e
e Plating Type
2022 : AWG20 to 22
Blank : Tin plating
2428 : AWG24 to 28
A
: Gold plated
B
: Gold plated (Note)
28
: AWG30
w Packaging Type
B186
r
Note: In case of the socket contact,
SCF : Socket Contact/Reel
"A" is attached to the tail of
SC
the product name. In case of
: Socket Contact/Bag
PCF : Plug Contact/Reel
the plug contact, "B" is
PC
attached thereto.
: Plug Contact/Bag
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will
be discontinued
soon. Please Pitch
check theConnector
products statusfor
on Discrete
the Hirose website
search at www.hirose-connectors.com,
or contact
Hirose sales
representative.
DF1B
Series●2.5mm
WireRoHS
Connection
(Product Compliant
with your
UL/CSA
Standard)
■Single Row Socket
Photo: Contact Inserted
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
Part Number
CL No.
Number of Contacts
A
DF1B- 2S-2.5R
541-0200-6
2
5
DF1B- 3S-2.5R
541-0201-9
3
7.5
2.5
DF1B-11S-2.5R
541-0209-0
11
27.5
25
5
DF1B-12S-2.5R
541-0210-0
12
30
27.5
DF1B- 4S-2.5R
541-0202-1
4
10
DF1B- 5S-2.5R
541-0203-4
5
12.5
10
7.5
DF1B-13S-2.5R
541-0211-2
13
32.5
30
DF1B-14S-2.5R
541-0212-5
14
35
32.5
DF1B- 6S-2.5R
541-0204-7
6
15
12.5
DF1B-15S-2.5R
541-0213-8
15
37.5
35
DF1B- 7S-2.5R
541-0205-0
7
17.5
15
DF1B-16S-2.5R
541-0214-0
16
40
37.5
DF1B- 8S-2.5R
541-0206-2
8
DF1B- 9S-2.5R
541-0207-5
9
20
17.5
DF1B-18S-2.5R
541-0215-3
18
45
42.5
22.5
20
DF1B-20S-2.5R
541-0216-6
20
50
47.5
DF1B-10S-2.5R
541-0208-8
10
25
22.5
RoHS
Yes
B
RoHS
Yes
Note1: The quantity at the specific No."None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.
Note2: The 2 contact connector contains the convex portion to prevent mis-insertion in the center at one point, which is different from
the above figure. The 3 to 7 contacts connectors have the area at both ends.
■Double Row Socket
Photo: Contact Inserted.
Unit: mm
Part Number
CL No.
Number of Contacts
Part Number
CL No.
Number of Contacts
DF1B- 4DS-2.5RC
541-0648-0
4
2.5
DF1B-22DS-2.5RC
541-0606-0
DF1B- 6DS-2.5RC
541-0649-3
6
DF1B- 8DS-2.5RC
541-0650-2
8
10
5
DF1B-24DS-2.5RC
12.5
7.5
DF1B-26DS-2.5RC
DF1B-10DS-2.5RC
541-0600-4
10
15
DF1B-12DS-2.5RC
541-0601-7
12
17.5 12.5
DF1B-14DS-2.5RC
541-0602-0
14
20
DF1B-16DS-2.5RC
541-0603-2
16
22.5 17.5
DF1B-18DS-2.5RC
541-0604-5
18
25
DF1B-20DS-2.5RC
541-0605-8
20
27.5 22.5
A
B
7.5
RoHS
10
15
20
Yes
A
B
22
30
25
541-0607-3
24
32.5
27.5
541-0608-6
26
35
30
DF1B-28DS-2.5RC
541-0609-9
28
37.5
32.5
DF1B-30DS-2.5RC
541-0610-8
30
40
35
DF1B-34DS-2.5RC
541-0612-3
34
45
40
DF1B-36DS-2.5RC
541-0613-6
36
47.5
42.5
DF1B-40DS-2.5RC
541-0615-1
40
52.5
47.5
RoHS
Yes
Note1: The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.) If needed, please order the product per bag.
Note2: The 4 contact connector contains the convex portion to prevent miss-insertion in the center at one point, which is different from
the above figure.
B187
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS
products
have been discontinued,
or will
be discontinued
soon.
Please check
the Connection
products status on(Product
the Hirose website
RoHS search
at www.hirose-connectors.com,
DF1B
Series●2.5mm
Pitch
Connector
for
Discrete
Wire
Compliant
with
UL/CSA Standard) or contact your Hirose sales representative.
■ Single Row Straight Pin Header
+0.1
KBoard Through-hole Diameter:Ø1.1+0
Unit: mm
Tin plated
Gold plated
Part Number
CL No.
Part Number
CL No.
Number of Contacts
A
B
DF1BZ- 2P-2.5DSA
541-2000-8
DF1B- 2P-2.5DSA(01)
541-0225-7-01
2
2.5
7.5
DF1BZ- 3P-2.5DSA
541-2001-0
DF1B- 3P-2.5DSA(01)
541-0226-0-01
3
5.0 10.0
DF1BZ- 4P-2.5DSA
541-2002-3
DF1B- 4P-2.5DSA(01)
541-0227-2-01
4
7.5 12.5
DF1BZ- 5P-2.5DSA
541-2003-6
DF1B- 5P-2.5DSA(01)
541-0228-5-01
5
10.0 15.0
DF1BZ- 6P-2.5DSA
541-2004-9
DF1B- 6P-2.5DSA(01)
541-0229-8-01
6
12.5 17.5
DF1BZ- 7P-2.5DSA
541-2005-1
DF1B- 7P-2.5DSA(01)
541-0230-7-01
7
15.0 20.0
DF1BZ- 8P-2.5DSA
541-2006-4
DF1B- 8P-2.5DSA(01)
541-0231-0-01
8
17.5 22.5
DF1BZ- 9P-2.5DSA
541-2007-7
DF1B- 9P-2.5DSA(01)
541-0232-2-01
9
20.0 25.0
DF1BZ-10P-2.5DSA
541-2008-0
DF1B-10P-2.5DSA(01)
541-0233-5-01
10
22.5 27.5 YES
DF1BZ-11P-2.5DSA
541-2009-2
––––––
––––––
––––––
DF1BZ-12P-2.5DSA
541-2010-1
DF1B-12P-2.5DSA(01)
541-0235-0-01
12
DF1BZ-13P-2.5DSA
541-2011-4
––––––
––––––
––––––
DF1BZ-14P-2.5DSA
541-2012-7
DF1B-14P-2.5DSA(01)
541-0237-6-01
14
32.5 37.5
DF1BZ-15P-2.5DSA
541-2013-0
DF1B-15P-2.5DSA(01)
541-0238-9-01
15
35.0 40.0
DF1BZ-16P-2.5DSA
541-2014-2
DF1B-16P-2.5DSA(01)
541-0239-1-01
16
37.5 42.5
DF1BZ-18P-2.5DSA
541-2015-5
DF1B-18P-2.5DSA(01)
541-0240-0-01
18
42.5 47.5
––
––
27.5 32.5
––
––
20
541-0241-3-01
541-2016-8
47.5 52.5
DF1BZ-20P-2.5DSA
DF1B-20P-2.5DSA(01)
Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.) If needed, please order the product per bag.
Note 2.The 2 and 3 contact connector contains the concave portion to prevent miss-insertion in the center at one point, which is
different from the above figure.In addition, the 4 to 7 contact connectors have two concave portions at both ends.
B188
RoHS
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will
be discontinued
soon. Please Pitch
check theConnector
products statusfor
on Discrete
the Hirose website
search at www.hirose-connectors.com,
or contact
Hirose sales
representative.
DF1B
Series●2.5mm
WireRoHS
Connection
(Product Compliant
with your
UL/CSA
Standard)
■ Single Row Right Angle Pin Header
+0.1
K Board Through-hole Diameter:Ø1.1+0
Unit: mm
Tin plated
Gold plated
Part Number
CL No.
Part Number
CL No.
Number of Contacts
A
B
DF1BZ- 2P-2.5DS
CL541-2034-0
DF1B- 2P-2.5DS(01)
541-0225-7-01
2
2.5
7.5
DF1BZ- 3P-2.5DS
CL541-2035-2
DF1B- 3P-2.5DS(01)
541-0226-0-01
3
5.0 10.0
DF1BZ- 4P-2.5DS
CL541-2036-5
DF1B- 4P-2.5DS(01)
541-0227-2-01
4
7.5 12.5
DF1BZ- 5P-2.5DS
CL541-2037-8
DF1B- 5P-2.5DS(01)
541-0228-5-01
5
10.0 15.0
DF1BZ- 6P-2.5DS
CL541-2038-0
DF1B- 6P-2.5DS(01)
541-0229-8-01
6
12.5 17.5
DF1BZ- 7P-2.5DS
CL541-2039-3
DF1B- 7P-2.5DS(01)
541-0230-7-01
7
15.0 20.0
DF1BZ- 8P-2.5DS
CL541-2040-2
DF1B- 8P-2.5DS(01)
541-0231-0-01
8
17.5 22.5
DF1BZ- 9P-2.5DS
CL541-2041-5
DF1B- 9P-2.5DS(01)
541-0232-2-01
9
20.0 25.0
DF1BZ-10P-2.5DS
CL541-2042-8
DF1B-10P-2.5DS(01)
541-0233-5-01
10
22.5 27.5 YES
DF1BZ-11P-2.5DS
CL541-2043-0
––––––
––––––
––––––
DF1BZ-12P-2.5DS
CL541-2044-3
DF1B-12P-2.5DS(01)
541-0235-0-01
12
DF1BZ-13P-2.5DS
CL541-2045-6
––––––
––––––
––––––
DF1BZ-14P-2.5DS
CL541-2046-9
DF1B-14P-2.5DS(01)
541-0237-6-01
14
32.5 37.5
DF1BZ-15P-2.5DS
CL541-2047-1
DF1B-15P-2.5DS(01)
541-0238-9-01
15
35.0 40.0
DF1BZ-16P-2.5DS
CL541-2048-4
DF1B-16P-2.5DS(01)
541-0239-1-01
16
37.5 42.5
DF1BZ-18P-2.5DS
CL541-2049-7
DF1B-18P-2.5DS(01)
541-0240-0-01
18
42.5 47.5
––
RoHS
––
27.5 32.5
––
––
20
47.5 52.5
541-0241-3-01
Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.
Note 2.The 4 and 6 contact connector contains the concave portion to prevent miss-insertion in the center at one point, which is
different from the above figure.
DF1BZ-20P-2.5DS
CL541-2050-6
DF1B-20P-2.5DS(01)
B189
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS
products
have been discontinued,
or will
be discontinued
soon.
Please check
the Connection
products status on(Product
the Hirose website
RoHS search
at www.hirose-connectors.com,
DF1B
Series●2.5mm
Pitch
Connector
for
Discrete
Wire
Compliant
with
UL/CSA Standard) or contact your Hirose sales representative.
■ Single Row Straight Pin Header for Potting
B Tube Size
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
7.5
Tube Package Quantity RoHS
64pieces
DF1BD- 2P-2.5DSA(**) 541-0800-3-**
2
2.5
DF1BD- 3P-2.5DSA(**) 541-0801-6-**
3
5
10
48
DF1BD- 4P-2.5DSA(**) 541-0802-9-**
4
7.5
12.5
38
DF1BD- 5P-2.5DSA(**) 541-0803-1-**
5
10
15
32
DF1BD- 6P-2.5DSA(**) 541-0804-4-**
6
12.5
17.5
27
DF1BD- 7P-2.5DSA(**) 541-0805-7-**
7
15
20
24
DF1BD- 8P-2.5DSA(**) 541-0806-0-**
8
17.5
22.5
21
DF1BD- 9P-2.5DSA(**) 541-0807-2-**
9
20
25
19
DF1BD-10P-2.5DSA(**) 541-0808-5-**
10
22.5
27.5
17
Yes
+0.1
K Board Positioning Boss Hole Diameter:Ø1.1+0
+0.1
K Board Through-hole Diameter:Ø1.1+0
[Specific No.] –* *, (* *)
(05): Tin plated
(25) : Tin plated, tube packaging
Note 1.A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the product per pack.
Note 2.Please order the tube packaging products, multiplying the packaging quantity (pieces).
Note 3.The 2 and 3 contact connector contains the concave portion to prevent miss-insertion in the center at one point, which is
different from the above figure.In addition, the 4 to 7 contacts connectors have two concave portions at both ends.
BApplicable Potting Thickness : 6mm
Potting status
B190
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will
be discontinued
soon. Please Pitch
check theConnector
products statusfor
on Discrete
the Hirose website
search at www.hirose-connectors.com,
or contact
Hirose sales
representative.
DF1B
Series●2.5mm
WireRoHS
Connection
(Product Compliant
with your
UL/CSA
Standard)
■ Double Row Straight Pin Header
+0.1
●Board Through-hole Diameter:Ø1.1+0
Unit: mm
Tin plated
Gold plated
Part Number
CL No.
Part Number
CL No.
Number of Contacts
A
B
DF1BZ- 4DP-2.5DSA
541-2017-0
DF1B- 4DP-2.5DSA(01)
541-0651-5-01
4
2.5
7.5
DF1BZ- 6DP-2.5DSA
541-2018-3
DF1B- 6DP-2.5DSA(01)
541-0652-8-01
6
5.0 10.0
DF1BZ- 8DP-2.5DSA
541-2019-6
DF1B- 8DP-2.5DSA(01)
541-0653-0-01
8
7.5 12.5
DF1BZ-10DP-2.5DSA
541-2020-5
DF1B-10DP-2.5DSA(01)
541-0616-4-01
10
10.0 15.0
DF1BZ-12DP-2.5DSA
541-2021-8
DF1B-12DP-2.5DSA(01)
541-0617-7-01
12
12.5 17.5
DF1BZ-14DP-2.5DSA
541-2022-0
DF1B-14DP-2.5DSA(01)
541-0618-0-01
14
15.0 20.0
DF1BZ-16DP-2.5DSA
541-2023-3
DF1B-16DP-2.5DSA(01)
541-0619-2-01
16
17.5 22.5
DF1BZ-18DP-2.5DSA
541-2024-6
DF1B-18DP-2.5DSA(01)
541-0620-1-01
18
20.0 25.0
DF1BZ-20DP-2.5DSA
541-2025-9
DF1B-20DP-2.5DSA(01)
541-0621-4-01
20
22.5 27.5 YES
DF1BZ-22DP-2.5DSA
541-2026-1
DF1B-22DP-2.5DSA(01)
541-0622-7-01
22
25.0 30.0
DF1BZ-24DP-2.5DSA
541-2027-4
DF1B-24DP-2.5DSA(01)
541-0623-0-01
24
27.5 32.5
DF1BZ-26DP-2.5DSA
541-2028-7
DF1B-26DP-2.5DSA(01)
541-0624-2-01
26
30.0 35.0
DF1BZ-28DP-2.5DSA
541-2029-0
DF1B-28DP-2.5DSA(01)
541-0625-5-01
28
32.5 37.5
DF1BZ-30DP-2.5DSA
541-2030-9
DF1B-30DP-2.5DSA(01)
541-0626-8-01
30
35.0 40.0
DF1BZ-34DP-2.5DSA
541-2031-1
DF1B-34DP-2.5DSA(01)
541-0628-3-01
34
40.0 45.0
DF1BZ-36DP-2.5DSA
541-2032-4
DF1B-36DP-2.5DSA(01)
541-0629-6-01
36
42.5 47.5
RoHS
47.5 52.5
541-2033-7
541-0631-8-01
DF1BZ-40DP-2.5DSA
DF1B-40DP-2.5DSA(01)
40
Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.
Note 2.The 4 and 6 contact connector contains the concave portion to prevent miss-insertion in the center area at one point, which is
different from the above figure.
B191
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS
products
have been discontinued,
or will
be discontinued
soon.
Please check
the Connection
products status on(Product
the Hirose website
RoHS search
at www.hirose-connectors.com,
DF1B
Series●2.5mm
Pitch
Connector
for
Discrete
Wire
Compliant
with
UL/CSA Standard) or contact your Hirose sales representative.
■Double Row Right Angle Pin Header
+0.1
K Board Through-hole Diameter:Ø1.1+0
Unit: mm
Tin plated
Gold plated
Part Number
CL No.
Part Number
CL No.
Number of Contacts
A
B
DF1BZ- 4DP-2.5DS
541-2051-9
DF1B- 4DP-2.5DS(01)
541-0654-3-01
4
7.5
2.5
DF1BZ- 6DP-2.5DS
541-2052-1
DF1B- 6DP-2.5DS(01)
541-0655-6-01
6
10.0 5.0
DF1BZ- 8DP-2.5DS
541-2053-4
DF1B- 8DP-2.5DS(01)
541-0656-9-01
8
12.5 7.5
DF1BZ-10DP-2.5DS
541-2054-7
DF1B-10DP-2.5DS(01)
541-0632-0-01
10
15.0 10.0
DF1BZ-12DP-2.5DS
541-2055-0
DF1B-12DP-2.5DS(01)
541-0633-3-01
12
17.5 12.5
DF1BZ-14DP-2.5DS
541-2056-2
DF1B-14DP-2.5DS(01)
541-0634-6-01
14
20.0 15.0
DF1BZ-16DP-2.5DS
541-2057-5
DF1B-16DP-2.5DS(01)
541-0635-9-01
16
22.5 17.5
DF1BZ-18DP-2.5DS
541-2058-8
DF1B-18DP-2.5DS(01)
541-0636-1-01
18
25.0 20.0
DF1BZ-20DP-2.5DS
541-2059-0
DF1B-20DP-2.5DS(01)
541-0637-4-01
20
27.5 22.5 YES
DF1BZ-22DP-2.5DS
541-2060-0
DF1B-22DP-2.5DS(01)
541-0638-7-01
22
30.0 25.0
DF1BZ-24DP-2.5DS
541-2061-2
DF1B-24DP-2.5DS(01)
541-0639-0-01
24
32.5 27.5
DF1BZ-26DP-2.5DS
541-2062-5
DF1B-26DP-2.5DS(01)
541-0640-9-01
26
35.0 30.0
DF1BZ-28DP-2.5DS
541-2063-8
DF1B-28DP-2.5DS(01)
541-0641-1-01
28
37.5 32.5
DF1BZ-30DP-2.5DS
541-2064-0
DF1B-30DP-2.5DS(01)
541-0642-4-01
30
40.0 35.0
DF1BZ-34DP-2.5DS
541-2065-3
DF1B-34DP-2.5DS(01)
541-0644-0-01
34
42.5 37.5
DF1BZ-36DP-2.5DS
541-2066-6
DF1B-36DP-2.5DS(01)
541-0645-2-01
36
47.5 42.5
RoHS
52.5 47.5
541-2067-9
541-0647-8-01
DF1BZ-40DP-2.5DS
DF1B-40DP-2.5DS(01)
40
Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.
Note 2.The 4 and 6 contact connector contains the concave portion to prevent miss-insertion in the center area at one point, which is
different from the above figure.
B192
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will
be discontinued
soon. Please Pitch
check theConnector
products statusfor
on Discrete
the Hirose website
search at www.hirose-connectors.com,
or contact
Hirose sales
representative.
DF1B
Series●2.5mm
WireRoHS
Connection
(Product Compliant
with your
UL/CSA
Standard)
■ Single Row In-line Plug(Simple Lock Type)
KApplicable Socket: DF1B-*S-2.5R
Contact Inserted.
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
Part Number
CL No.
Number of Contacts
A
B
DF1BA- 2EP-2.5RC
541-0700-9
2
2.5
7.1
DF1BA- 8EP-2.5RC
541-0706-5
8
17.5
22.1
DF1BA- 3EP-2.5RC
541-0701-1
3
5
9.6
DF1BA- 9EP-2.5RC
541-0707-8
9
20
24.6
DF1BA- 4EP-2.5RC
541-0702-4
4
7.5
12.1
DF1BA-10EP-2.5RC
541-0708-0
10
22.5
27.1
DF1BA- 5EP-2.5RC
541-0703-7
5
10
14.6
DF1BA-12EP-2.5RC
541-0710-2
12
27.5
32.1
DF1BA- 6EP-2.5RC
541-0704-0
6
12.5
17.1
DF1BA- 7EP-2.5RC
541-0705-2
7
15
19.6
RoHS
Yes
RoHS
Yes
Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.
Note 2.The 2 contacts connector contains the concave portion to prevent miss-insertion in the center area at one point, which is
different from the above figure.In addition, the 3 to 7 contact connectors contain the concave portion at both sides.
B Panel Cutouts
Panel
Unit: mm
Note 3
C
Applicable Plug
Number of Contacts
Panel Board Thickness (Note 1)
D
0.5 to 1.2
1.3 to 1.6
1.7 to 2.0
DF1BA- 2EP-2.5RC
2
11.2
11.9
12.6
DF1BA- 3EP-2.5RC
3
13.7
14.4
15.1
9.8
DF1BA- 4EP-2.5RC
4
16.2
16.9
17.6
12.3
DF1BA- 5EP-2.5RC
5
18.7
19.4
20.1
14.8
DF1BA- 6EP-2.5RC
6
21.2
21.9
22.6
17.3
DF1BA- 7EP-2.5RC
7
23.7
24.4
25.1
19.8
DF1BA- 8EP-2.5RC
8
26.2
26.9
27.6
22.3
DF1BA- 9EP-2.5RC
9
28.7
29.4
30.1
24.8
DF1BA-10EP-2.5RC
10
31.2
31.9
32.6
27.3
DF1BA-12EP-2.5RC
12
36.2
36.9
37.6
32.3
7.3
Note 1.The installation hole size C according to panel board thickness.
Note 2.Fabricate installation holes so that no burr can occur.
Note 3.At the panel tab portion, use the surface that will not be rounded.
B193
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS
products
have been discontinued,
or will
be discontinued
soon.
Please check
the Connection
products status on(Product
the Hirose website
RoHS search
at www.hirose-connectors.com,
DF1B
Series●2.5mm
Pitch
Connector
for
Discrete
Wire
Compliant
with
UL/CSA Standard) or contact your Hirose sales representative.
■ Double Row In-line Plug (Simple Lock Type)
KApplicable Socket: DF1B-*DS-2.5RC
Contact Inserted.
Unit: mm
Part Number
CL No.
Number of Contacts
DF1BA- 4DEP-2.5RC
541-0719-7
4
2.5
DF1BA- 6DEP-2.5RC
541-0720-6
6
5
DF1BA- 8DEP-2.5RC
541-0721-9
8
7.5
DF1BA-10DEP-2.5RC
541-0722-1
10
10
DF1BA-12DEP-2.5RC
541-0723-4
12
12.5
18.6
DF1BA-14DEP-2.5RC
541-0724-7
14
15
21.1
DF1BA-16DEP-2.5RC
541-0725-0
16
17.5
23.6
DF1BA-18DEP-2.5RC
541-0726-2
18
20
26.1
A
Part Number
CL No.
Number of Contacts
A
B
8.6
DF1BA-20DEP-2.5RC
541-0727-5
20
22.5
28.6
11.1
DF1BA-22DEP-2.5RC
541-0728-8
22
25
31.1
13.6
DF1BA-24DEP-2.5RC
541-0729-0
24
27.5
33.6
16.1
DF1BA-26DEP-2.5RC
541-0730-0
26
30
36.1
DF1BA-28DEP-2.5RC
541-0731-2
28
32.5
38.6
DF1BA-30DEP-2.5RC
541-0732-5
30
35
41.1
DF1BA-34DEP-2.5RC
541-0734-0
34
40
46.1
B
RoHS
Yes
RoHS
Yes
Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.
Note 2.The 4 contacts connector contains the concave portion to prevent miss-insertion in the center at one point, which is different
from the above figure.
B Panel Cutouts
Unit: mm
C
Applicable Plug
Number of
Contacts
DF1BA- 4DEP-2.5RC
4
12.7
13.4
14.1
8.8
DF1BA- 6DEP-2.5RC
6
15.2
15.9
16.6
11.3
DF1BA- 8DEP-2.5RC
8
17.7
18.4
19.1
13.8
DF1BA-10DEP-2.5RC
10
20.2
20.9
21.6
16.3
DF1BA-12DEP-2.5RC
12
22.7
23.4
24.1
18.8
DF1BA-14DEP-2.5RC
14
25.2
25.9
26.6
21.3
DF1BA-16DEP-2.5RC
16
27.7
28.4
29.1
23.8
DF1BA-18DEP-2.5RC
18
30.2
30.9
31.6
26.3
DF1BA-20DEP-2.5RC
20
32.7
33.4
34.1
28.8
DF1BA-22DEP-2.5RC
22
35.2
35.9
36.6
31.3
DF1BA-24DEP-2.5RC
24
37.7
38.4
39.1
33.8
DF1BA-26DEP-2.5RC
26
40.2
40.9
41.6
36.3
DF1BA-28DEP-2.5RC
28
42.7
43.4
44.1
38.8
DF1BA-30DEP-2.5RC
30
45.2
45.9
46.6
41.3
DF1BA-34DEP-2.5RC
34
50.2
50.9
51.6
46.3
Panel Board Thickness (Note 1)
D
0.5 to 1.2 1.3 to 1.6 1.7 to 2.0
Note 3
Panel
Note 1.The installation hole size C according to panel board thickness.
Note 2.Fabricate installation holes so that no burr can occur.
Note 3.At the panel tab portion, use the surface that will not be rounded.
B194
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will
be discontinued
soon. Please Pitch
check theConnector
products statusfor
on Discrete
the Hirose website
search at www.hirose-connectors.com,
or contact
Hirose sales
representative.
DF1B
Series●2.5mm
WireRoHS
Connection
(Product Compliant
with your
UL/CSA
Standard)
■ Single Row In-line Socket (Full Lock Type)
KApplicable Socket: DF1B-*DEP-2.5RC
Contact Inserted.
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
Part Number
CL No.
Number of Contacts
A
B
DF1B- 2ES-2.5RC
541-0320-8
2
2.5
6.5
DF1B- 8ES-2.5RC
541-0326-4
8
17.5
21.5
DF1B- 3ES-2.5RC
541-0321-0
3
5
9
DF1B- 9ES-2.5RC
541-0327-7
9
20
24
DF1B- 4ES-2.5RC
541-0322-3
4
7.5
11.5
DF1B-10ES-2.5RC
541-0328-0
10
22.5
26.5
DF1B- 5ES-2.5RC
541-0323-6
5
10
14
DF1B-11ES-2.5RC
541-0329-2
11
25
29
DF1B- 6ES-2.5RC
541-0324-9
6
12.5
16.5
DF1B-12ES-2.5RC
541-0330-1
12
27.5
31.5
DF1B- 7ES-2.5RC
541-0325-1
7
15
19
DF1B-13ES-2.5RC
541-0331-4
13
30
34
RoHS
Yes
RoHS
Yes
Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.
B Panel Cutouts
Note 3
Panel
Unit: mm
E
Applicable Plug
Number of Contacts
C
D
Panel Board Thickness (Note 1)
0.5 to 1.2
1.3 to 1.6
1.7 to 2.0
DF1B- 2ES-2.5RC
2
4.7
6.7
10.8
11.3
12
DF1B- 3ES-2.5RC
3
7.2
9.2
13.3
13.8
14.5
DF1B- 4ES-2.5RC
4
9.7
11.7
15.8
16.3
17
DF1B- 5ES-2.5RC
5
12.2
14.2
18.3
18.8
19.5
DF1B- 6ES-2.5RC
6
14.7
16.7
20.8
21.3
22
DF1B- 7ES-2.5RC
7
17.2
19.2
23.3
23.8
24.5
DF1B- 8ES-2.5RC
8
19.7
21.7
25.8
26.3
27
DF1B- 9ES-2.5RC
9
22.2
24.2
28.3
28.8
29.5
DF1B-10ES-2.5RC
10
24.7
26.7
30.8
31.3
32
DF1B-11ES-2.5RC
11
27.2
29.2
33.3
33.8
34.5
DF1B-12ES-2.5RC
12
29.7
31.7
35.8
36.3
37
DF1B-13ES-2.5RC
13
32.2
34.2
38.3
38.8
39.5
Note 1.The installation hole size C will be changed according to panel board thickness.
Note 2.Fabricate installation holes so that no burr can occur.
Note 3.At the panel tab portion, use the surface that will not be rounded.
B195
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS
products
have been discontinued,
or will
be discontinued
soon.
Please check
the Connection
products status on(Product
the Hirose website
RoHS search
at www.hirose-connectors.com,
DF1B
Series●2.5mm
Pitch
Connector
for
Discrete
Wire
Compliant
with
UL/CSA Standard) or contact your Hirose sales representative.
■ Double Row In-line Socket (Full Lock Type)
KApplicable Socket: DF1B-*EP-2.5RC
Contact Inserted.
Unit: mm
Part Number
CL No.
Number of Contacts
Part Number
CL No.
Number of Contacts
A
B
DF1B-10DES-2.5RC
541-0351-1
15
DF1B-24DES-2.5RC
541-0357-8
24
27.5
32.5
DF1B-12DES-2.5RC
DF1B-14DES-2.5RC
12.5
17.5
DF1B-26DES-2.5RC
541-0358-0
26
30
35
15
20
DF1B-28DES-2.5RC
541-0359-3
28
32.5
37.5
16
17.5
22.5
DF1B-30DES-2.5RC
541-0360-2
30
35
40
541-0346-1
18
20
25
DF1B-32DES-2.5RC
541-0361-5
32
37.5
42.5
DF1B-20DES-2.5RC
541-0355-2
20
22.5
27.5
DF1B-34DES-2.5RC
541-0362-8
34
40
45
DF1B-22DES-2.5RC
541-0356-5
22
25
30
A
B
10
10
541-0352-4
12
541-0353-7
14
DF1B-16DES-2.5RC
541-0354-0
DF1B-18DES-2.5RC
RoHS
Yes
RoHS
Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.
B Panel Cutouts
Note 3
Panel
Unit: mm
C
Applicable Plug
Number of Contacts
Panel Board Thickness (Note 1)
0.5 to 1.2
1.3 to 1.6
1.7 to 2.0
E
DF1B-10DES-2.5RC
10
19.1
19.8
20.5
15.2
3.7
DF1B-12DES-2.5RC
12
21.6
22.3
23
17.7
3.7
DF1B-14DES-2.5RC
14
24.1
24.8
25.5
20.2
3.7
DF1B-16DES-2.5RC
16
26.6
27.3
28
22.7
3.7
DF1B-18DES-2.5RC
18
29.1
29.8
30.5
25.2
3.7
DF1B-20DES-2.5RC
20
31.6
32.3
33
27.7
5.2
DF1B-22DES-2.5RC
22
34.1
34.8
35.5
30.2
5.2
DF1B-24DES-2.5RC
24
36.6
37.3
38
32.7
5.2
DF1B-26DES-2.5RC
26
39.1
39.8
40.5
35.2
5.2
DF1B-28DES-2.5RC
28
41.6
42.3
43
37.7
5.2
DF1B-30DES-2.5RC
30
44.1
44.8
45.5
40.2
5.2
DF1B-32DES-2.5RC
32
46.6
47.3
48
42.7
5.2
DF1B-34DES-2.5RC
34
49.1
49.8
50.5
45.2
5.2
Note 1.The installation hole size C according to panel board thickness.
Note 2.Fabricate installation holes so that no burr can occur.
Note 3.At the panel tab portion, use the surface that will not be rounded.
B196
D
Yes
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will
be discontinued
soon. Please Pitch
check theConnector
products statusfor
on Discrete
the Hirose website
search at www.hirose-connectors.com,
or contact
Hirose sales
representative.
DF1B
Series●2.5mm
WireRoHS
Connection
(Product Compliant
with your
UL/CSA
Standard)
■ Single Row In-line Plug (Full Lock Type)
KApplicable Socket: DF1B-*ES-2.5RC
Contact Inserted.
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
Part Number
CL No.
Number of Contacts
A
B
DF1B- 2EP-2.5RC
541-0332-7
2
8.9
2.5
DF1B- 8EP-2.5RC
541-0338-3
8
23.9
17.5
DF1B- 3EP-2.5RC
541-0333-0
3
11.4
5
DF1B- 9EP-2.5RC
541-0339-6
9
26.4
20
DF1B- 4EP-2.5RC
541-0334-2
4
13.9
DF1B-10EP-2.5RC
541-0340-5
10
28.9
22.5
DF1B- 5EP-2.5RC
541-0335-5
5
16.4
10
DF1B-11EP-2.5RC
541-0341-8
11
31.4
25
DF1B- 6EP-2.5RC
541-0336-8
6
18.9
12.5
DF1B-12EP-2.5RC
541-0342-0
12
33.9
27.5
DF1B- 7EP-2.5RC
541-0337-0
7
21.4
15
DF1B-13EP-2.5RC
541-0343-3
13
36.4
30
7.5
RoHS
Yes
RoHS
Yes
Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.
■ Double Row In-line Plug (Full Lock Type)
KApplicable Socket: DF1B-*DES-2.5RC
Contact Inserted.
Unit: mm
Part Number
CL No.
Number of Contacts
A
Part Number
CL No.
Number of Contacts
A
B
DF1B-10DEP-2.5RC
541-0366-9
10
17.2
DF1B-12DEP-2.5RC
541-0367-1
12
19.7
10
DF1B-24DEP-2.5RC
541-0372-1
24
34.7
27.5
12.5
DF1B-26DEP-2.5RC
541-0373-4
26
37.2
30
DF1B-14DEP-2.5RC
541-0368-4
14
22.2
15
DF1B-28DEP-2.5RC
541-0374-7
28
39.7
32.5
DF1B-16DEP-2.5RC
541-0369-7
16
24.7
17.5
DF1B-30DEP-2.5RC
541-0375-0
30
42.2
35
DF1B-18DEP-2.5RC
541-0350-9
18
27.2
20
DF1B-32DEP-2.5RC
541-0376-2
32
44.7
37.5
DF1B-20DEP-2.5RC
541-0370-6
20
29.7
22.5
DF1B-34DEP-2.5RC
541-0377-5
34
47.2
40
DF1B-22DEP-2.5RC
541-0371-9
22
32.2
25
B
RoHS
Yes
RoHS
Yes
Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.
B197
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS
products
have been discontinued,
or will
be discontinued
soon.
Please check
the Connection
products status on(Product
the Hirose website
RoHS search
at www.hirose-connectors.com,
DF1B
Series●2.5mm
Pitch
Connector
for
Discrete
Wire
Compliant
with
UL/CSA Standard) or contact your Hirose sales representative.
■ ID Contact for Socket
Part Number
CL No.
DF1B-R24F
541-0217-9
DF1B-R24
541-0220-3
DF1B-R26F
541-0218-1
DF1B-R26
541-0221-6
DF1B-R28F
541-0219-4
DF1B-R28
541-0222-9
DF1B-R24FA(06) 541-0261-0-06
DF1B-R24A(06) 541-0264-9-06
DF1B-R26FA(06) 541-0262-3-06
DF1B-R26A(06) 541-0265-1-06
DF1B-R28FA(06) 541-0263-6-06
DF1B-R28A(06) 541-0266-4-06
Applicable Cable
Applicable
Cable Indication
AWG
UL Style
Wire Construction Jacket Diameter
24
AWG 24
1061
11 cores./0.16mm 0.9 to 1.39mm
26
AWG 26
28
AWG 28
24
AWG 24
26
AWG 26
28
AWG 28
1061
1007
1061
1007
1061
1061
1007
1061
1007
7 cores./0.16mm
Packaging
Type
Quantity
Reel
10000
0.9 to 1.39mm
7 cores./0.127mm 0.9 to 1.39mm
11 cores./0.16mm 0.9 to 1.39mm
7 cores./0.16mm
0.9 to 1.39mm
7 cores./0.127mm 0.9 to 1.39mm
Bag
100
Reel
10000
Bag
100
Reel
10000
Bag
100
Reel
10000
Bag
100
Reel
10000
Bag
100
Reel
10000
Bag
100
Finish
RoHS
Tin plated
Yes
Gold plated
K ID Contact Extraction Tool DF-C-PO (A)
Note 1.The applicable cable conductor is the tin plated annealing copper wire.
Note 2.If other cables are used instead of the applicable cable, cotact Hirose sales department.
■ Crimping Contact for Socket
K Applicable Cable (Tin Plated Annealing Copper Wire)
Conductor Size (Wire construction)
AWG20 (21cores/0.18mm)
AWG22 (17cores/0.16mm)
AWG24 (11cores/0.16mm)
AWG26 (7cores/0.16mm)
AWG28 (7cores0.127mm)
AWG30 (7cores/0.1mm)
Part Number
CL No.
Applicable
Applicable Cable
Cable Indication
AWG
DF1B-2022SCF 541-0223-1
20
AWG 20 to
DF1B-2022SC
541-0224-4
22
AWG 22
DF1B-2428SCF 541-0678-1
24
AWG 24 to
DF1B-2428SC
541-0679-4
28
AWG 28
DF1B-30SCF
541-0682-9
DF1B-30SC
541-0683-1
30
AWG 30
DF1B-2022SCFA 541-0662-1
20
AWG 20 to
AWG 22
DF1B-2022SCA 541-0663-4
22
DF1B-2428SCFA 541-0680-3
24
AWG 24 to
DF1B-2428SCA 541-0681-6
28
AWG 28
30
AWG 30
DF1B-30SCFA
541-0684-4
DF1B-30SCA
541-0685-7
K Crimping Contact Extraction Tool DF-C-PO (B)
B198
Jacket Diameter
1.2 to 1.9mm
0.9 to 1.5mm
0.6 to 1.2mm
1.2 to 1.9mm
0.9 to 1.5mm
0.6 to 1.2mm
Packaging
Type
Quantity
Reel
10000
Bag
100
Reel
10000
Bag
100
Reel
10000
Bag
100
Reel
10000
Bag
100
Reel
10000
Bag
100
Reel
10000
Bag
100
K Recommended Cable
UL1061, UL1007
K Strip Length
2.0 to 2.5mm
Note:If other cables are used instead
of the applicable cable, consult
Hirose sales department.
Finish
RoHS
Tin plated
Yes
Gold plated
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will
be discontinued
soon. Please Pitch
check theConnector
products statusfor
on Discrete
the Hirose website
search at www.hirose-connectors.com,
or contact
Hirose sales
representative.
DF1B
Series●2.5mm
WireRoHS
Connection
(Product Compliant
with your
UL/CSA
Standard)
■ ID Contact for Plug
Part Number
CL No.
DF1B-24PRF 541-0666-2
DF1B-24PR
541-0667-5
DF1B-26PRF 541-0668-8
DF1B-26PR
541-0669-0
DF1B-28PRF 541-0670-0
DF1B-28PR
541-0671-2
Applicable Cable
Applicable
Packaging
Cable Indication
AWG
UL Style
Wire structure Jacket Diameter
24
AWG 24
1061
11 pcs./0.16mm 0.9 to 1.39mm
26
AWG 26
28
AWG 28
1061
1007
1061
1007
7 pcs./0.16mm
0.9 to 1.39mm
7 pcs./0.127mm 0.9 to 1.39mm
Type
Quantity
Reel
10000
Bag
100
Reel
10000
Bag
100
Reel
10000
Bag
100
Finish
RoHS
Tin plated
Yes
K ID Contact Extraction Tool DF-C-PO (C)
Note 1.The applicable cable conductor is the tin plated annealing copper wire.
Note 2.If other cables are used instead of the applicable cable, contact Hirose sales department.
■ Crimping Contact for Plug
K Applicable Cable (Tin Plated Annealing Copper Wire)
Conductor Size (Contact wire construction)
AWG20 (21 pieces/0.18mm)
AWG22 (17 pieces/0.16mm)
AWG24 (11 pieces/0.16mm)
AWG26 (7 pieces/0.16mm)
AWG28 (7 pieces/0.127mm)
AWG30 (7 pieces/0.1mm)
Applicable Cable
Applicable
cable indicator
AWG
DF1B-2022PCF 541-0259-9
20
AWG 20 to
Part Number
CL No.
DF1B-2022PC 541-0260-8
22
AWG 22
DF1B-2428PCF 541-0664-7
24
AWG 24 to
DF1B-2428PC 541-0665-0
28
AWG 28
30
AWG 30
DF1B-2022PCFB 541-0690-7
20
AWG 20 to
DF1B-2022PCB 541-0691-0
22
AWG 22
DF1-PD2428SCFB 541-0660-6
24
AWG 24 to
DF1-PD2428SCB 541-0661-9
28
AWG 28
30
AWG 30
DF1B-30PCF
541-0686-0
DF1B-30PC
541-0687-2
DF1B-30PCFB 541-0688-5
DF1B-30PCB
541-0689-8
Jacket Diameter
1.2 to 1.9mm
0.9 to 1.5mm
0.6 to 1.2mm
1.2 to 1.9mm
0.9 to 1.5mm
0.6 to 1.2mm
Packaging
Type
Quantity
Reel
10000
Bag
100
Reel
10000
Bag
100
Reel
10000
Bag
100
Reel
10000
Bag
100
Reel
10000
Bag
100
Reel
10000
Bag
100
K Recommended Cable
UL1061, UL1007
K Strip Length
3.0 to 3.7mm
Note:If other cables are used instead
of the applicable cable, consult
Hirose sales department.
Treatment
RoHS
Tin plated
Yes
Gold plated
K Crimping Contact Extraction Tool DF-C-PO (C)
B199
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS
products
have been discontinued,
or will
be discontinued
soon.
Please check
the Connection
products status on(Product
the Hirose website
RoHS search
at www.hirose-connectors.com,
DF1B
Series●2.5mm
Pitch
Connector
for
Discrete
Wire
Compliant
with
UL/CSA Standard) or contact your Hirose sales representative.
B Applicable Tool
[Press Main Unit and Applicator]
Connection Type
Type
Applicator
ID
Manual ID tool
[Manual Crimping Tool]
Part Number
CL No.
AP105-DF1B-R
901-4507-4
DF1B-R**F/FA06 **=24,26,28
Applicable Contacts
AP105-DF1B-PR
901-4536-2
DF1B-**PRF**=24,26,28
DF1B-T2428HR
550-0171-0
DF1B-R**/A06**=24,26,28
DF1B-T2428PHR
550-0221-7
DF1B-**PR/PRB **=24,26,28
AP105-DF1B-2022S
901-4510-9
DF1B-2022SCF/SCFA
AP105-DF1B-2428S
901-4518-0
DF1B-2428SCF/SCFA
AP105-DF1B-30S
901-4517-8
DF1B-30SCF/SCFA
AP105-DF1B-2022P
901-4509-0
DF1B-2022PCF/PCFB
AP105-DF1B-2428P
901-4521-5
DF1B-2428PCF,DF1-PD2428SCF/SCFB
AP105-DF1B-30P
901-4519-3
DF1B-30PCF/PCFB
DF1B-TA2022SHC
550-0182-7
DF1B-2022SC/SCA
DF1B-TA2428SHC
550-0209-1
DF1B-2428SC/SCA
Manual
DF1B-TA30SHC
550-0211-3
DF1B-30SC/SCA
crimping tool
DF1B-TA2022PHC
550-0183-0
DF1B-2022PC/PCB
DF1B-TA2428PHC
550-0224-5
DF1B-2428PC,DF1-PD2428SCB
DF1B-TA30PHC
550-0210-0
DF1B-30PC/PCB
Applicator
Crimping
Press Main Unit
Extraction Tool
CM-105
901-0005-4
__________________________________
DF-C-PO(A)
550-0170-8
DF1B-R**F
DF-C-PO(B)
550-0179-2
DF1B-****SCF
DF-C-PO(C)
550-0198-7
DF1B-****PC,DF1B-**PRF
Note: If a trouble has occurred due to tools which are not designated by Hirose, Hirose won't guarantee any product
B200
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will
be discontinued
soon. Please Pitch
check theConnector
products statusfor
on Discrete
the Hirose website
search at www.hirose-connectors.com,
or contact
Hirose sales
representative.
DF1B
Series●2.5mm
WireRoHS
Connection
(Product Compliant
with your
UL/CSA
Standard)
B Applicable Tool
BPrecautions
1. Recommended Soldering Condition
Flow: 250ç for 10 seconds
Manual soldering: 300ç for 3 seconds
2. Cleaning Condition
Refer to Nylon Connector Use Hand book.
3. Connection Condition
Refer to Nylon Connector Use Hand book.
4. Cautions
■The color phase of this product is slightly different from that of the formed product according to
the manufacturing lot and future storage conditions, but the difference doesn't affect the
performance.
5. Precation
Refer to Nylon Connector Use Hand book.
B201