Ordering number:EN2855A DSK10 Diffused Junction Type Silicon Diode Designed for 5mm-pitch Automatic Insertion 1.0A Power Rectifier Features Package Dimensions · Designed for 5mm-pitch automatic insertion. · Small plastic molded structure (3mm body). · Peak reverse voltage : 100 to 1000V. · Average rectified current : 1.0A. unit:mm 1168 [DSK10] C:Cathode A:Anode Specifications Absolute Maximum Ratings at Ta = 25˚C Parameter Peak Reverse Voltage Average Rectified Current Symbol IO Surge Forward Current IFSM Junction Temperature Tj Storage Temperature Tstg Parameter Peak Reverse Voltage Conditions DSK10B VRM Average Rectified Current Surge Forward Current IFSM Junction Temperature Tj Storage Temperature Tstg Unit 400 V Ta=50˚C → 1.0 A 50Hz sine wave, 1 cycle → 45 A → 150 ˚C → –40 to +150 ˚C Symbol VRM IO DSK10E 100 Conditions DSK10G DSK10L Unit 600 1000 V Ta=50˚C → 1.0 A 50Hz sine wave, 1 cycle → 30 A → 150 ˚C → –40 to +150 ˚C Electrical Characteristics at Ta = 25˚C Parameter Forward Voltage Reverse Current Symbol VF IR Conditions Ratings min typ max Unit IF=1.0A (B, E) IF=1.0A (G, L) 1.1 1.2 V V VR:At each VRM 10 µA SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters TOKYO OFFICE, Tokyo Bldg., 1-10 , Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 53098HA (KT)/92995GI (KOTO)/D268TA, TS No.2855-1/2 DSK10 No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss. Anyone purchasing any products described or contained herein for an above-mentioned use shall: Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use: Not impose any responsibilty for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of May, 1998. Specifications and information herein are subject to change without notice. PS No.2855-2/2