AD REF01EJ

a
10 V Precision
Voltage Reference
REF01
FEATURES
10 V Output, 0.3% Max
Adjustment Range, 3% Min
Excellent Temperature Stability, 8.5 ppm/C Max
Low Noise, 30 V p-p Max
Low Supply Current, 1.4 mA Max
Wide Input Voltage Range, 12 V to 40 V
High Load Driving Capability, 20 mA
No External Components
Short Circuit Proof
PIN CONFIGURATION
TO-99 (J-Suffix)
Epoxy MINI-DIP (P-Suffix)
8-Lead Hermetic DIP (Z-Suffix)
NC
8-Lead SO (S-Suffix)
8
NC 1
7
VIN 2
NC
6
5
NC 3
NC 1
VOUT
TRIM
4
The REF01 precision voltage reference provides a stable 10 V
output that can be adjusted over a 3% range with minimal effect
on temperature stability. Single-supply operation over an input
voltage range of 12 V to 40 V, a low current drain of 1 mA, and
excellent temperature stability are achieved with an improved
band gap design. Low cost, low noise, and low power make the
REF01 an excellent choice whenever a stable voltage reference
is required. Applications include D/A and A/D converters,
portable instrumentation, and digital voltmeters. Full military
temperature range devices with screening to MIL-STD-883
are available. For new designs, please refer to ADR01.
REF01
GND 4
GROUND
(CASE)
GENERAL DESCRIPTION
8
NC
NC
TOP VIEW
NC 3 (Not to Scale) 6 VOUT
VIN 2
7
5
TRIM
NC = NO CONNECT*
NC = NO CONNECT*
*NC = No Connect. Do not connect anything on these pins as some
of them are reserved for factory testing purposes.
SIMPLIFIED SCHEMATIC
INPUT
R7
R8
2
R14
Q15
Q7
Q8
Q14
R15
Q13
Q18
Q9
Q12
Q16
Q11
C1
Q10
R6
R3
Q6
Q19
Q21
Q17
Q5
OUTPUT
6
R13
R4
R12
Q4
R5
Q1
Q2
Q3
Q20
R9
16.7k
50k
TRIM
1.23V
5
R1
R10
R11
2k
R2
GROUND
4
REV. C
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties that
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
www.analog.com
Fax: 781/326-8703
© Analog Devices, Inc., 2002
REF01–SPECIFICATIONS
ELECTRICAL SPECIFICATIONS (@ V
IN
= 15 V, TA = 25C, unless otherwise noted.)
Parameter
Symbol
Conditions
Output Voltage
Output Adjustment Range
Output Voltage Noise1
Line Regulation2
Load Regulation2
Turn-On Settling Time3
Quiescent Supply Current
Load Current
Sink Current4
Short Circuit Current
VO
VTRIM
en p-p
IL = 0 mA
9.97
RP = 10 kΩ
± 3.0
0.1 Hz to 10 Hz
VIN = 13 V to 33 V
IL = 0 mA to 10 mA
To ± 0.1% of Final Value
No Load
10
–0.3
VO = 0
tON
ISY
IL
IS
ISC
Min
REF01A/E
Typ
Max
10.00
± 3.3
20
0.006
0.005
5
1.0
21
–0.5
30
10.03
Min
REF01/H
Typ
Max
9.95
± 3.0
10.00
± 3.3
20
0.006
0.006
5
1.0
21
–0.5
30
30
0.010
0.008
1.4
10
–0.3
10.05
30
0.010
0.010
1.4
Unit
V
%
µV p-p
%/V
%/mA
µs
mA
mA
mA
mA
(@ VIN = 15 V, –55C TA +125C for REF01A/E, and 0C TA 70C for REF01H and
ELECTRICAL SPECIFICATIONS I = 0 mA, unless otherwise noted.)
L
Parameter
Symbol
Output Voltage Change
VOT
with Temperature 5, 6
Output Voltage
TCVO
Temperature Coefficient7
Change in VO Temperature
Coefficient with Output
Adjustment
Line Regulation
(VIN = 13 V to 33 V)2
Load Regulation
(IL = 0 mA to 8 mA)2
Conditions
Min
0°C TA 70°C
–55°C TA +125°C
0.02
0.06
3.0
RP = 10 kΩ
0.7
0°C TA 70°C
–55°C TA +125°C
0°C TA 70°C
–55°C TA +125°C
0.007
0.009
0.006
0.007
ELECTRICAL SPECIFICATIONS
Min
REF01/H
Typ
Max
0.06
0.15
8.5
0.07
0.18
10.0
0.17
0.45
25.0
0.7
0.012
0.015
0.010
0.012
0.007
0.009
0.007
0.009
Unit
%
%
ppm/°C
ppm/%
0.012
0.015
0.012
0.015
%/V
%/mA
(@ VIN = 15 V, TA = 25C, unless otherwise noted.)
Parameter
Symbol
Conditions
Output Voltage
Output Adjustment Range
Output Voltage Noise1
Line Regulation2
Load Regulation2
Turn-On Settling Time3
Quiescent Supply Current
Load Current
Sink Current4
Short Circuit Current
VO
VTRIM
en p-p
IL = 0 mA
9.90
RP = 10 kΩ
± 2.7
0.1 Hz to 10 Hz
VIN = 13 V to 33 V
IL = 0 mA to 8 mA
To ± 0.1% of Final Value
No Load
8
–0.3
VO = 0
tON
ISY
IL
IS
ISC
REF01A/E
Typ
Max
Min
–2–
REF01C
Typ
Max
Unit
10.00
± 3.3
25
0.009
0.006
5
1.0
21
–0.5
30
V
%
µV p-p
%/V
%/mA
µs
mA
mA
mA
mA
10.10
35
0.015
0.015
1.6
REV. C
REF01
ELECTRICAL SPECIFICATIONS
Parameter
Symbol
(@ VIN = 15 V, 0ⴗC ⱕ TA ⱕ 70ⴗC for REF01CJ, REF01CZ, and
–40ⴗC ⱕ TA ⱕ +85ⴗC for REF01CP and REF01CS, unless otherwise noted.)
Conditions
Output Voltage Change
⌬VOT
with Temperature5, 6
Output Voltage
TCVO
Temperature Coefficient7
Change in VO Temperature
Coefficient with Output
Adjustment
Line Regulation2
Load Regulation2
REF01C
Typ
Max
Min
RP = 10 kΩ
VIN = 13 V to 30 V
IL = 0 to 5 mA
Unit
0.14
0.45
%
20
65
ppm/°C
0.7
0.011
0.008
0.018
0.018
ppm/%
%/V
%/mA
NOTES
1
Sample tested.
2
Line and load regulation specifications include the effect of self-heating.
3
Guaranteed by design.
4
During sink current test the device meets the output voltage specified.
5
⌬VOT is defined as the absolute difference between the maximum output voltage and the minimum
output voltage over the specified temperature range expressed as a percentage of 10 V:
∆VOT =
V MAX – V MIN
10 V
× 100
6
⌬VOT specification applies trimmed to +10,000 V or untrimmed.
7
TCVO is defined as ⌬Var divided by the temperature range, i.e.
(
)
TCVO 0o to + 70o C =
(
(
∆VOT 0o to + 70o C
o
70 C
)
TCVO −55o to + 125o C =
(
) and
∆VOT −55o to + 125o C
180o C
)
Specifications are subject to change without notice.
15V
2
VIN
VO
6
OUTPUT
REF01
TRIM
5
10k⍀
GND
4
The REF01 trim terminal can be used to adjust the output
voltage over a 10 V ± 300 mV range. This feature allows the
system designer to trim system errors by setting the reference to
a voltage other than 10 V. Of course, the output can also be set
to exactly 10.000 V or to 10.240 V for binary applications.
Adjustment of the output does not significantly affect the temperature performance of the device. The temperature coefficient
change is approximately 0.7 ppm/°C for 100 mV of output
adjustment.
2
6
Figure 1. Output Adjustment
2. INPUT VOLTAGE (VIN)
4. GROUND
5. TRIM
6. OUTPUT VOLTAGE (VOUT)
+18V
VIN
4
5
REF01
DIE SIZE 0.074 ⴛ 0.048 INCH, 3552 SQUARE MILS
(1.88 ⴛ 1.22 mm, 2.29 SQUARE mm)
Figure 3. Dice Characteristics (125ⴗC Tested Dice Available)
GND
–18V
Figure 2. Burn-In Circuit
REV. C
–3–
REF01
(@ VIN = 15 V, TA = 25C for REF01N and REF01G devices, TA = 125C for REF01NT and REF01GT devices,
WAFER TEST LIMITS unless otherwise noted.)*
Parameter
Symbol
Conditions
Output Voltage
VO
IL = 0
Output Adjustment
Range
Line Regulation
V TRIM
RP = 10 kΩ
VIN = 13 V to 33 V
REF01NT
Limit
REF01N
Limit
REF01GT
Limit
REF01G
Limit
Unit
10.05
9.95
10.03
9.97
10.10
9.90
10.05
9.95
V max
V min
0.015
± 3.0
0.01
0.015
± 3.0
0.01
% min
%/V max
*Electrical tests are performed at wafer probe to the limits shown. Due to variations in assembly methods and normal yield loss, yield after packaging is not guaranteed
for standard product dice. Consult factory to negotiate specifications based on dice lot qualification through sample lot assembly and testing.
TYPICAL ELECTRICAL CHARACTERISTICS (@ V
Parameter
Symbol
Load Regulation
Output Voltage
Noise
Turn-On Settling
Time
en p-p
tON
Quiescent Current
ISY
Load Current
Sink Current
Short Circuit
Current
Output Voltage
Temperature
Coefficient
IL
IS
ISC
TCVO
IN
= 15 V, TA = 25C, unless otherwise noted.)*
Conditions
REF01NT
Typical
REF01N
Typical
REF01GT
Typical
REF01G
Typical
Unit
IL = 0 mA to 10 mA
IL = 0 mA to 8 mA,
NT, GT @ 125°C
0.007
0.005
0.009
0.006
%/mA
0.1 Hz to 10 Hz
To ± 0.1% of Final
Value NT, GT @
125°C
No Load, NT,
GT @ 125°C
20
20
20
20
7.5
5.0
7.5
5.0
µs
1.4
21
–0.5
1.0
21
–0.5
1.4
21
–0.5
1.0
21
–0.5
mA
mA
mA
VO = 0
30
30
30
30
mA
10
10
10
10
ppm/°C
µV p-p
*For 25°C specifications of REF01NT and REF01GT, see REF01N and REF01G, respectively.
–4–
REV. C
REF01
ABSOLUTE MAXIMUM RATINGS*
Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 V
Output Short Circuit Duration
(to Ground or VIN) . . . . . . . . . . . . . . . . . . . . . . . . Indefinite
Storage Temperature Range
J, RC, and Z Packages . . . . . . . . . . . . . . . –65°C to +150°C
P Package . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to +125°C
Operating Temperature Range
REF01A . . . . . . . . . . . . . . . . . . . . . . . . . . –55°C to +125°C
REF01CJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
REF01CP, REF01CS, REF01E,
REF01H . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to +85°C
Junction Temperature (TJ) . . . . . . . . . . . . . –65°C to +150°C
Lead Temperature (Soldering @ 60 sec) . . . . . . . . . . . . 300°C
Package Type
JA*
JC
Unit
TO-99 (J)
8-Pin Hermetic DIP (Z)
8-Pin Plastic DIP (P)
8-Pin SO (S)
170
162
110
160
24
26
50
44
°C/W
°C/W
°C/W
°C/W
*JA is specified for worst-case mounting conditions, i.e., JA is
specified for device in socket for TO, CERDIP, and P-DIP packages; JA is specified for device soldered to printed circuit board for
SO package.
*Absolute maximum ratings apply to both DICE and packaged parts, unless otherwise noted.
ORDERING GUIDE1
TA = 25C
VOS Max
(mV)
± 30
± 30
± 50
± 100
± 100
± 100
TO-99
REF01EJ
Package Description
CERDIPS
PDIP
8-Lead
8-Lead
REF01AZ2
REF01EZ
REF01HZ
SOIC
8-Lead
REF01HP
REF01HS3
REF01CP
REF01CS3
REF01CJ
Operating
Temperature
Range
MIL
XIND
XIND
COM
XIND
XIND
NOTES
1
Burn-in is available on commercial and industrial temperature range parts in Cerdip, plastic DIP, and TO-can packages.
2
For devices processed in total compliance to MIL-STD-883, add 883 after part number. Consult factory for 883 data sheet.
3
For availability and burn-in information on SO package, contact your local sales office.
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although
the REF01 features proprietary ESD protection circuitry, permanent damage may occur on devices
subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are
recommended to avoid performance degradation or loss of functionality.
REV. C
–5–
WARNING!
ESD SENSITIVE DEVICE
0.0031
0.0100
56
0.0310
46
0.1000
36
0.3100
1.0000
26
0
10
VIN = 15V
TA = 25 C
100
1,000
100
3.1000
1k
10k
100k
FREQUENCY – Hz
10
10
10.000
1M
TPC 1. Line Regulation vs. Frequency
1k
10k
100k
FREQUENCY – Hz
0.020
0.015
0.010
0.005
0
–10
LOAD REG – T/LOAD REG – 25 C
30
25
500mW MAXIMUM
DISSIPATION
20
15
10
5
15
20
25
INPUT VOLTAGE – V
30
TPC 4. Maximum Load Current vs.
Input Voltage
0
10
20
30
TIME – s
40
50
60
TPC 3. Output Change Due to Thermal
Shock
1.4
1.3
1.2
1.1
1.0
0.9
0.8
1.3
1.2
1.1
1.0
0.9
0.8
0.7
0.7
0.6
–60 –40 –20 0 20 40 60 80 100 120 140
TEMPERATURE – C
0.6
–60 –40 –20 0 20 40 60 80 100 120 140
TEMPERATURE – C
TPC 5. Normalized Load Regulation
(IL = 10 mA) vs. Temperature
TPC 6. Normalized Line Regulation
vs. Temperature
1.3
30
VIN = 15V
VIN = 15V
QUIESCENT CURRENT – mA
25
20
15
10
5
0
–60 –40 –20
DEVICE IMMERSED
IN 75C OIL BATH
VIN = 15V
TA = 25 C
MAXIMUM LOAD CURRENT – mA
VIN = 15V
0.025 T = 25C, T = 75C
A
A
1.4
SHORT CIRCUIT PROTECTION
0
10
0.030
1M
TPC 2. Output Wideband Noise vs.
Bandwidth (0.1 Hz to Frequency Indicated)
35
MAXIMUM LOAD CURRENT – mA
100
0.035
LINE REG – T/LINE REG – 25 C
16
VIN = 15V
TA = 25 C
OUTPUT NOISE – V p-p
66
10,000
LINE REGULATION – %/V
LINE REGULATION – dB
76
PERCENT CHANGE IN OUTPUT VOLTAGE – %
REF01–Typical Performance Characteristics
0 20 40 60 80 100 120 140
TEMPERATURE – C
TPC 7. Maximum Load Current vs.
Temperature
1.2
1.1
1.0
0.9
0.8
0.7
–60 –40 –20 0 20 40 60 80 100 120 140
TEMPERATURE – C
TPC 8. Quiescent Current vs.
Temperature
–6–
REV. C
REF01
+15V
ANALOG
INPUT
0 TO +10V
–15V +15V
2
VIN
10k
+15V
LSB
MSB
0.1F
5.0k
VIN
0.1F
6
VO
4
lO
2
DAC08
REF01
3
13
14
–15V
lO
1
SERIAL
OUTPUT
E
POS. FULL SCALE –1LSB
1
1
1
1
1
1
1
1
+4.960
ZERO SCALE
1
0
0
0
0
0
0
0
0.000
NEG. FULL SCALE +1LSB
0
0
0
0
0
0
0
1
–4.960
NEG. FULL SCALE
0
0
0
0
0
0
0
0
–5.000
10
START
2
8
7
CMP01C
4
1
1k
7
AM2592
SUCCESSIVEAPPROXIMATION
REGISTER
CONNECT START TO
CONVERSION COMPLETE
FOR CONTINUOUS
CONVERSIONS
9
2
CONVERSION
COMPLETE
Figure 4. D/A Converter Reference
4
–15V
14 13 12 11 6 5 4 3
B1 B2 B3 B4 B5 B6 B7 B8
3
2
5 6 7 8 9 10 1112 1
B1
B2
B3
B4
B5
B6
B7
B8
–15V
5.000k
3.9M
lO
DAC08
15
EO
OP02
5.0k
+15V
5
16
5k
VLC
CC
V–
V+
GND
4
5k
4
5.0k B1 B2 B3 B4 B5 B6 B7 B8
lO
5
CC
REF01
GND TRIM
+15V
2
VO
+15V
0.01F
6
TTL CLOCK
INPUT 2.25MHz
Figure 7. A/D Converter Reference
+15V
2
VIN
+10V
VO 6
1.1mA
REF01
2
VIN
9V
10k 0.1%
5
TRIM
GND
VO
+
6
0.1F
REF01
TRIM
GND
4
+15V
0.1F
9V
10k 0.1%
–10V
5
100k
10.000V
OP02
5k
4
–
–15V
Figure 8. ± 10 V Reference
Figure 5. Precision Calibration Standard
VOLTAGE COMPLIANCE: –25V TO +3V
15V
VOLTAGE COMPLIANCE: –3V TO +25V
IOUT
2
2
VIN
VIN
VO
6
VO
REF01
REF01
TRIM
6
5
R
IOUT =
10V
+ 1mA
R
TRIM
GND
GND
4
4
5
R
IOUT =
10V
+ 1mA
R
–15V
IOUT
Figure 6. Current Source
REV. C
Figure 9. Current Sink
–7–
REF01
REFERENCE STACK WITH EXCELLENT LINE
REGULATION
PRECISION CURRENT SOURCE
A current source with 25 V output compliance and excellent
output impedance can be obtained using this circuit. REF01
keeps the line voltage and power dissipation constant in the
device; the only important error consideration at room temperature
is the negative supply rejection of the op amp. The typical 3 µV/
V PSRR of the OP02E will create an 8 ppm change (3 V/V 25 V/10 V) in output current over a 25 V range. For example, a
10 mA current source can be built (R = 1 kΩ) with 300 MΩ
output impedance.
RO =
Three REF01s can be stacked to yield 10.000 V, 20.000 V, and
30.000 V outputs. An additional advantage is near-perfect line
regulation of the 10.0 V and 20.0 V output. A 32 V to 60 V
input change produces an output change that is less than the
noise voltage of the devices. A load bypass resistor (RB) provides
a path for the supply current (ISY) of the 20.000 V regulator.
In general, any number of REF01s can be stacked this way. For
example, 10 devices will yield outputs of 10, 20, 30 . . . 100 V.
The line voltage can change from 105 V to 130 V. However,
care must be taken to ensure that the total load currents do not
exceed the maximum usable current (typically 21 mA).
25 V
8 × 10−6 × 10 mA
+50V
6
VO
32V TO 60V
2
2
VIN
VIN
REF01
TRIMMED
OUTPUTS
REF01
TRIM
GND
GND
4
4
2
VIN
VO
30.000V
VO 6
5
10k
2
6
VIN
REF01
C
R
(TRIM FOR
CALIBRATION)
6
20.000V
REF01
GND
4
VO
TRIM
GND
2
R
VIN
C
VO
6
5
4
10k
10.000V
REF01
7
6
OP02E
2
TRIM
VO = 0
TO +25V
3
–5V
10k
RB
6.8k
4
4
RC = 10–5 SEC
5
GND
IO = +10V
R
Figure 11. Reference Stack
Figure 10. Precision Current Source
SUPPLY BYPASSING
For best results, it is recommended that the power supply pin is
bypassed with a 0.1 µF disc ceramic capacitor.
–8–
REV. C
REF01
OUTLINE DIMENSIONS
8-Lead Ceramic Dip-Glass Hermetic Seal [CERDIP]
(Q-8)
8-Lead Metal Can [TO-99]
(H-08B)
Dimensions shown in inches and (millimeters)
Dimensions shown in inches and (millimeters)
0.055 (1.40)
MAX
0.005 (0.13)
MIN
8
REFERENCE PLANE
0.1850 (4.70)
0.1650 (4.19)
5
0.310 (7.87)
0.220 (5.59)
PIN 1
1
0.2500 (6.35) MIN
0.1000 (2.54) BSC
4
0.320 (8.13)
0.290 (7.37)
0.060 (1.52)
0.015 (0.38)
0.3700 (9.40)
0.3350 (8.51)
0.3350 (8.51)
0.3050 (7.75)
5
0.405 (10.29) MAX
0.200 (5.08)
MAX
0.150 (3.81)
MIN
0.200 (5.08)
0.125 (3.18)
0.1600 (4.06)
0.1400 (3.56)
0.0500 (1.27) MAX
0.100 (2.54) BSC
SEATING
0.070 (1.78) PLANE
0.030 (0.76)
0.023 (0.58)
0.014 (0.36)
0.5000 (12.70)
MIN
0.2000
(5.08)
BSC
15
0
3
7
2
0.1000
(2.54)
BSC
0.0190 (0.48)
0.0160 (0.41)
0.0400 (1.02) MAX
0.0400 (1.02)
0.0100 (0.25)
0.015 (0.38)
0.008 (0.20)
6
4
0.0210 (0.53)
0.0160 (0.41)
0.0450 (1.14)
0.0270 (0.69)
8
1
0.0340 (0.86)
0.0280 (0.71)
45 BSC
BASE & SEATING PLANE
CONTROLLING DIMENSIONS ARE IN INCH; MILLIMETERS DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN
COMPLIANT TO JEDEC STANDARDS MO-002AK
CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETERS DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN
8-Lead Standard Small Outline Package [SOIC]
Narrow Body
(R-8)
8-Lead Plastic Dual-in-Line Package [PDIP]
(N-8)
Dimensions shown in inches and (millimeters)
Dimensions shown in millimeters and (inches)
0.375 (9.53)
0.365 (9.27)
0.355 (9.02)
5.00 (0.1968)
4.80 (0.1890)
4.00 (0.1574)
3.80 (0.1497)
8
5
1
4
1.27 (0.0500)
BSC
0.25 (0.0098)
0.10 (0.0040)
COPLANARITY
SEATING
0.10
PLANE
6.20 (0.2440)
5.80 (0.2284)
1.75 (0.0688)
1.35 (0.0532)
0.51 (0.0201)
0.33 (0.0130)
8
5
1
4
0.295 (7.49)
0.285 (7.24)
0.275 (6.98)
0.325 (8.26)
0.310 (7.87)
0.300 (7.62)
0.100 (2.54)
BSC
0.50 (0.0196)
45
0.25 (0.0099)
0.180
(4.57)
MAX
8
0.25 (0.0098) 0 1.27 (0.0500)
0.41 (0.0160)
0.19 (0.0075)
0.150 (3.81)
0.130 (3.30)
0.110 (2.79)
0.022 (0.56)
0.018 (0.46)
0.014 (0.36)
COMPLIANT TO JEDEC STANDARDS MS-012AA
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN
0.015
(0.38)
MIN
SEATING
PLANE
0.060 (1.52)
0.050 (1.27)
0.045 (1.14)
0.150 (3.81)
0.135 (3.43)
0.120 (3.05)
0.015 (0.38)
0.010 (0.25)
0.008 (0.20)
COMPLIANT TO JEDEC STANDARDS MO-095AA
CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETERS DIMENSIONS
(IN PARENTHESES)
REV. C
–9–
REF01
Revision History
Location
Page
10/02—Data Sheet changed from REV. B to REV. C.
Edits to FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Delete RC-SUFFIX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Edits to ABSOLUTE MAXIMUM RATINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Edits to ORDERING GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Edits to Package Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Delete CP-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Updated OUTLINE DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
–10–
REV. C
–11–
–12–
PRINTED IN U.S.A.
C00373–0–10/02(C)