IDC Systems PCB Solder Transition Connectors PRODUCT DESCRIPTION PCB Solder Transition Connectors provide fast, permanent termination of flat cable to printed circuit boards. The PCB Standard 4 Row and 2 Row Connectors can be soldered to the board either before or after crimping the cable. PCB SOLDER TRANSITION CONNECTORS, 4 ROW AND 2 ROW DESIGN ADVANTAGES 4 ROW • 11 contact sizes-10, 14, 16, 20, 26, 34, 40, 44, 50, 56, and 60 positions. • Available in solder tail lengths for 1.57 mm (.062") or 3.18 mm (.125") board thickness. • Diagonal pin pattern. 2 ROW • Contact Material—Beryllium copper with tin/lead over 50 µ inches min. nickel plating. • 16 contact sizes-4, 6, 8, 10, 14, 16, 20, 24, 26, 30, 34, 36, 40, 44, 50 and 60 positions. • Available in solder tail lengths for 1.57 mm (.062") or 3.18 mm (.125") board thickness. PCB SOLDER TRANSITION CONNECTORS INDEX Standard 4 row PCB connector ..............................................51 2 row Slim Line PCB connector ..............................................52 • Narrow design maximizes packaging density—designed to fit into a standard 2.54 mm x 2.54 mm (.100" x.100") male header grid pattern. LR92984 Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 50 E60980 IDC Systems PCB Solder Transition Connectors STANDARD 4 ROW PCB SOLDER TRANSITION CONNECTORS LR92984 E60980 A PHYSICAL PROPERTIES INSULATION MATERIAL: Glass filled thermoplastic rated UL 94V-0 COLOR: Blue CONTACTS: Beryllium copper; tin/lead over 50µ inches nickel ±.25 (± .010) 11.05 (.435) ELECTRICAL PROPERTIES 6.02 MAX (0.237) CURRENT RATING: 1 Amp INSULATION RESISTANCE: >1 x 109 0hms DIELECTRIC STRENGTH: >1000 VRMS at sea level After Crimping Tail Length ± .13 (See chart) (± .005) ENVIRONMENTAL PROPERTIES TEMPERATURE RATING: -55˚C TO 125°C 7.72 Nom. (.304) APPLICATION TOOLING HAND TOOL use Die BENCH PRESS (MANUAL) BENCH PRESS (PNEUMATIC) use Platen use Base Plate 779-2100 779-2152 779-3200 779-3500XT 779-3130 779-3152 For installation after the connector has been soldered to the circuit board use: PLATEN 779-3132 BASE PLATE 779-3154 .28 (.011) Pads Pre-crimp position 2.54 ± .38 (.100 ±.015) 7.62 ± .38 (.300 ±.015) B ±.38 (± .015) 3.30 (.130) 5.08 ± .38 (.200 ±.015) 1.73 ± .25 (.068 ±.010) Recommended P.C. Board Pattern CABLE See pages 116-128 Hole pattern for 10 position connector Hole pattern for 14 position connector Hole pattern for 16, 20, 40, 44, 56 and 60 position connector (16 position shown) Ordering Information CATALOG NUMBERS SOLDER TAIL LENGTH 2.54 (1.00) 3.96 (.156) PCB THICKNESS 1.57 (.062) 3.18 (.125) 609-1003 609-1043 Hole pattern for 26, 34 and 50 position connector (26 position shown) Recommended P.C. Board Pattern B DIMENSIONS IN MM (INCHES) NO. OF POS. A B 10 18.03 (.710) 11.43 (.450) 2.54 (.100) 609-1403 609-1443 14 23.11 (.910) 16.51 (.650) 609-1603 609-1643 16 25.65 (1.010) 19.05 (.750) 609-2003 609-2043 20 30.73 (1.210) 24.13 (.950) 609-2603 609-2643 26 38.35 (1.510) 31.75 (1.250) 609-3403 609-3443 34 48.51 (l.910) 41.91 (1.650) 609-4003 609-4043 40 56.13 (2.210) 49.53 (1.950) 609-4403 609-4443 44 61.21 (2.410) 54.61 (2.150) 609-5003 609-5043 50 68.83 (2.710) 62.23 (2.450) 609-5603 609-5643 56 76.45 (3.010) 69.85 (2.750) 609-6003 609-6043 60 81.53 (3.210) 74.93 (2.950) Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 5.08 (.200) ±.13 (.050) 1.27 (.050) Tol. Noncumulative 7.87 MIN (.310) 1.19 ± .05 (.047 ±.002) Dia. Holes (After plating) 10.16 MIN (.400) 7.62 (.300) Dimensions shown are for reference only. Dimensions are in millimeters (inches). 51 IDC Systems PCB Solder Transition Connectors 2 ROW PCB SOLDER TRANSITION CONNECTORS LR92984 A ± .25 (± 010) E60980 PHYSICAL PROPERTIES 7.11 (.280) INSULATION MATERIAL: Glass filled thermoplastic rated UL 94V-0 COLOR: Blue CONTACTS: Beryllium copper; tin/lead over 50µ inches nickel ELECTRICAL PROPERTIES 8.76 (.345) Max. assembled 7.06 Max. after cable (.278) installation CURRENT RATING: 1 Amp INSULATION RESISTANCE: >1 x 109 0hms DIELECTRIC STRENGTH: >1000 VRMS at sea level 8.26 (.325) 8.97 Crimp (.353)Position ENVIRONMENTAL PROPERTIES TEMPERATURE RATING: -55˚C TO 125°C APPLICATION TOOLING HAND TOOL use Die BENCH PRESS (MANUAL) BENCH PRESS (PNEUMATIC) use Platen use Base Plate (2 Row) 779-2100 779-2153 779-3200 779-3500XT 779-3133 779-3153 3.88 Nom (.153) B ±.13 (± .005) 8.23Min (.324) ±.25 (± .010) 622 - XX 53 See pages 116-128 ± .25 (± 010) Recommended P.C. Board Pattern For installation after the connector has been soldered to the circuit board use: PLATEN 779-3132 BASE PLATE 779-3154 CABLE B .51 (.020) Pads # of Positions Ordering Information 2.54 ± .13 (.100 ±.005) 2.54 ± .13 (.100 ±.005) Tol. Noncumulative .89 ± .05 (.035 ± .002) (After plating) 11.30 (.445) R (PCB Retention on 4 corners) RT (PCB Retention on all pins) CATALOG NUMBERS SOLDER TAIL LENGTH 2.54 (1.00) 3.96 (.156) PCB THICKNESS 1.57 (.062) 3.18 (.125) 622-0453 622-0463 STRAIN RELIEF NO. OF POS. A B 622-0433 4 10.31 (.406) 2.54 (.100) 622-0653 622-0663 622-0633 6 12.85 (.506) 5.08 (.200) 622-0853 622-0863 622-0833 8 15.39 (.606) 7.62 (.300) 622-1053 622-1063 622-1033 10 17.93 (.706) 10.16 (.400) 622-1453 622-1463 622-1433 14 23.01 (.906) 15.24 (.600) 622-1653 622-1663 622-1633 16 25.55 (1.006) 17.78 (.700) 622-2053 622-2063 622-2033 20 30.63 (1.206) 22.86 (.900) 622-2453 622-2463 622-2433 24 35.71 (1.406) 27.94 (1.100) 622-2653 622-2663 622-2633 26 38.25 (1.506) 30.48 (1.200) 622-3053 622-3063 622-3033 30 43.33 (1.706) 35.56 (1.400) 622-3453 622-3463 622-3433 34 48.41 (1.906) 40.64 (1.600) 622-3653 622-3663 622-3633 36 50.95 (2.006) 43.18 (1.700) 622-4053 622-4063 622-4033 40 56.03 (2.206) 48.26 (1.900) 622-4453 622-4463 622-4433 44 61.11 (2.406) 53.34 (2.100) 622-5053 622-5063 622-5033 50 68.73 (2.706) 60.96 (2.400) 622-6053 622-6063 622-6033 60 81.43 (3.206) 73.66 (2.900) DIMENSIONS IN MM (INCHES) Tail length ±.13 (± .005 (See Cat. No. Code) (End contacts only) 2.54 Nom (.100) 2.29 (.090) Retention Feature Tail length ±.25 (± .010) (See Cat. No. Code) (End contacts only) NOTE: For retention feature add suffix R to part number Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches). 52