Alcatel 1916 SDH SDH / SONET integrated modules Receiver STM-16 / OC-48 with Preamplifier EDFA Description These integrated modules are intended for use in single channel transmission with pre-amplifier EDFA in combination with an optical filter. The receiver contains an in-house III-V APD (Avalanche Photodiode) detector with preamplifier in a front-end module, a main amplifier ASIC, a clock and data recovery function with accurate decision circuit. The modules are housed in a space-saving 30-pin package, providing the same electrical access for overall applications. The Alcatel 1916 SDH family is a range of transmitter and receiver modules, providing convenient and flexible optical interfaces for SDH / SONET systems operating at 2.488 Gbit/s & 2.666 Gbit/s and exceeds the applicable ITU-T G.957, ITU-T G.783, ITU-T G.692 and Bellcore GR-253 standards. Features • Bit rate 2.488 Gbit/s & 2.666 Gbit/s (FEC) • Sensitivity with preamplifier - 41 dBm • Operating at 1.5 µm wavelength • Full performance in operating case temperature from 0 to + 70 °C • Low power consumption • Small size less than 100 cm2 • Data Reshaping • Clock recovery & Data Retiming • Convenient digital alarms to minimize external circuitry • Analog information for flexible integration • Common pin-out for all modules • Alcatel Reliability and Qualification Program for built in quality Applications Used in transmission systems from medium to high-speed for intermediate-reach to long-reach applications, the Alcatel 1900 SDH family operates at SONET OC-3, OC-12 and OC-48 rates as well as at ITU-T SDH rates of STM-1, STM-4 and STM-16. Covering all types of SDH / SONET optical interfaces (tributaries and aggregates) the Alcatel 1900 SDH modules are suitable for line systems, Add Drop Multiplexers and digital cross-connects as well as ATM switches. As part of the Alcatel 1900 SDH family, the Alcatel 1916 SDH module is suited for all types of STM-16 (ShortHaul, Long-Haul, Very-Long-Haul and Ultra-Long-Haul) and OC-48 (Intermediate-Reach, Long-Reach and Ultra-Long-Reach) optical interfaces. These modules ensure ease of use and offer new flexibility to system designers. Optical characteristics Parameter Condition Symbol Min Typical Max Unit Bit rate Note 1 2.448 or 2.666 GBit/s Center wavelength λc 1545 1562 nm Receiver sensitivity of EDFA REDFA - 41 - 38 dBm Receiver sensitivity of Receiver RRX -20 - 14 dBm Return loss at module RRoss 27 dB Note 1: transmitter with ER min > 12.5 dB with chirp compatible with the dispersion and fiber, preamplifier EDFA with noise factor > 4.5 dB and optical filter with 3 dB bandwidth < 0.5 nm. All parameters are specified End-of-Life within the overall relevant operating temperature range. The typical values are referenced to + 25 °C, nominal power supply, beginning of life. Electrical characteristics Parameter Condition Symbol Min Typical Max Unit + 4.75 5 + 5.25 V Positive supply voltage VCC + 380 + 510 mA Positive supply current ICC Negative supply voltage VEE - 5.45 - 5.2 - 4.94 V - 400 - 340 mA Negative supply current IEE Power consumption Pc 4.9 W ECL output data & clock voltage Note 2 DV 0.5 0.7 0.9 Vpp Logic high level output Isrc=-150 µA VOH 3.5 4.7 V 0.2 0.44 V Logic low level output Isink < 4 mA VOL Alarm activation level Note 3 AAC 10-3 Alarm desactivation level Note 3 ADE 10-4 Alarm activation time TAC 95 µs 50 ms Alarm deactivation time TDE Note 2 : internally AC coupled and externally loaded by 50 Ω. Note 3 : input power sensitivity is considered at connector interface and related to BER with S/N > 25 dB / 0.1 nm. All parameters are specified End-of-Life within the overall relevant operating temperature range. The typical values are referenced to + 25 °C, nominal power supply, beginning of life. Absolute maximum ratings Parameter Maximum optical input power Positive supply voltage Negative supply voltage Output current Alarm output voltage Alarm output current Storage temperature Storage 72h max Operating temperature Symbol VCC VEE TSTG TOP Min -5 0 -6 - 50 0 - 0.5 - 25 - 40 0 Max +6 0 0 VCC + 20 + 70 + 70 + 70 Unit dBm V V mApp V mA °C °C Outline drawing Pin description DATA _____ DATA Serial retimed data output true. AC coupled with 50 Ω=external load capability. A high electrical level corresponds to a high optical level. Serial retimed data output false. AC coupled with 50 Ω=external load capability. A high electrical level corresponds to a low optical level. CLOCK Serial recovered clock output true. AC coupled with 50 Ω=external load capability. The falling edge is in the middle of the data pattern. ______ CLOCK Serial recovered clock output false. AC coupled with 50 external load capability. The rising edge is in the middle of the data pattern. Pin out N° 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 Symb GND VCC VCC GND VEE VEE GND NUC NUC NUC DTA NUC GND GND GND Description Ground (0 V) Positive Power Supply Positive Power Supply Ground (0 V) Negative Power Supply Negative Power Supply Ground (0 V) No User Connection No User Connection No User Connection Decision Threshold Adjustment No User Connection Ground (0 V) Ground (0 V) Ground (0 V) N° Symb 2 GND 4 VCC 6 VCC 8 GND 10 VEE 12 VEE 14 GND 16 NUC 18 LOS 20 NUC 22 OIL 24 NUC 26 GND 28 GND 30 GND Description Ground (0 V) Positive Power Supply Positive Power Supply Ground (0 V) Negative Power Supply Negative Power Supply Ground (0 V ) No User Connection Loss of Optical Signal No User Connection Optical Input Level No User Connection Ground (0 V) Ground (0 V) Ground (0 V) System block diagram LOS High voltage circuit Clock Recovery Decision Circuit Clock Data AGC Preamplifier VCC Analog Convertion OIL Power Regulation DTA GND VEE DTA Decision Threshold Adjustment: input analog voltage that allows optimization of the sensitivity around the factory setting. When DTA is opened the factory setting is the default value. LOS Loss of Optical Signal : set when the incoming optical power level cross the alarm threshold. An hysteresis is provided. Open collector with internal pull-up. The active level corresponds to a 0 V voltage output level. OIL Optical Input Level : analog information, proportional to the optical input signal. NUC No User Connection : this lead must be left open. November 2000 Copyright © 2000 Alcatel Optronics Ordering information Alcatel 1916 SDH Bit Rate (Mbit/s) 2.448 2.666 Options 3CN xxxxx Part Number 3CN 00217 CA 3CN 00217 FA xA → FC/PC xB → SC/PC Standards Compliant with ITU-T G.957 & G.783 & G.691 Optical fiber according to ITU-T G.652 Environment according to IEC 68-2 and MIL STD 883 Bellcore TR-EOP-000063 Bellcore GR-253-CORE ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Customized versions are available for large quantities. Performance figures contained in this document must be specifically confirmed in writing by Alcatel Optronics before they become applicable to any particular order or contract. Alcatel Optronics reserves the right to make changes to the products or information contained herein without notice. EUROPE Route de Ville just F-91625 NOZAY CEDEX Tel : (+33) 1 64 49 49 10 Fax : (+33) 1 64 49 49 61 USA 12030 Sunrise Valley Drive RESTON - VA 22091-3495 Tel : (+1) 703 715 3921 Fax : (+1) 703 860 1183 CANADA 45, De Villebois, suite 200 Gatineau (PQ) Canada, J8T 8J7 Tel : (+1) 819 243 3755 Fax : (+1) 819 243 3354 JAPAN Yebisu Garden Place Tower PO Box 5024 20-3, Ebisu 4 - Chome Shibuya - ku TOKYO 150 - 6028 Tel : (+81) 3 5424 85 65 Fax : (+81) 3 5424 85 81