FUJITSU MEDIA DEVICE DATA SHEET DS04-23119-3E ASSP Mobile Communication Systems Piezoelectric SAW BPF (700 MHz to 1000 MHz) F5CM Series (B2) ■ DESCRIPTION The F5CM series of SAW filters have balanced in/unbalanced out or unbalanced in/balanced out of I/O ports. Therefore these filters are suitable for the design using balanced type of IC. By using these filters, any transforming devises, such as balun is not required. The F5CM series filters apply to the frequency range 700 MHz to 1000 MHz. High performance has been realized with high reliability and small size by using original materials and original design. The F5CM series filters are suitable for RF interstage filter in mobile communication systems and standard parts are available for GSM and AMPS/TDMA/CDMA standards. ■ FEATURES • • • • • • Balanced/unbalanced I/O ports Ultra compact and light package (3.0 mm × 3.0 mm package) Any external matching network is not required Excellent stopband attenuation Small inband ripple Surface mount package (SMT) ■ PACKAGE F5CM Series (B2) ■ PIN ASSIGNMENT (BOTTOM VIEW) 1 2 3 6 5 4 ■ PIN DESCRIPTION • BALANCED IN/UNBALANCED OUT type (Tx filter) Pin no. Pin name Description 1 GND Ground Pin 2 OUT Unbalanced output 3 GND Ground Pin 4 IN Balanced Input 5 GND Ground Pin 6 IN Balanced Input • UNBALANCED IN/BALANCED OUT type (Rx filter) Pin no. Pin name Description 2 1 GND Ground Pin 2 IN Unbalanced Input 3 GND Ground Pin 4 OUT Balanced Output 5 GND Ground Pin 6 OUT Balanced Output F5CM Series (B2) ■ ABSOLUTE MAXIMUM RATINGS Parameter Rating Symbol Unit Min. Max. Ta –30 +85 °C Storage temperature Tstg –40 +100 °C Input power Pin — +15 dBm DCin –5 +5 V Operating temperature Input DC Voltage WARNING: Piezoelectric devices can be permanently damaged by application of stress (voltage, current, temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings. ■ RECOMMENDED OPERATING CONDITION Parameter Symbol Operating temperature Ta Value Min. Max. –30 +85 Unit °C WARNING: The recommended operating conditions are required in order to ensure the normal operation of the piezoelectric device. All of the device's electrical characteristics are warranted when the device is operated within these ranges. Always use piezoelectric devices within their recommended operating condition ranges. Operation outside these ranges may adversely affect reliability and could result in device failure. No warranty is made with respect to uses, operating conditions, or combinations not represented on the data sheet. Users considering application outside the listed conditions are advised to contact their FUJITSU representatives beforehand. ■ STANDARD FREQUENCIES Frequency (MHz) Band width (MHz) Input type/ Impedance Output type/ Impedance Tx 902.5 25 Balance 50 Ω Rx 947.5 25 Unbalance 50 Ω Unbalance 50 Ω Balance 50 Ω Balance 150 Ω Balance 50 Ω Unbalance 50 Ω Balance 50 Ω Applications GSM EGSM Rx 942.5 25 AMPS/ TDMA/ CDMA Tx 836.5 25 Rx 881.5 25 Unbalance 50 Ω Balance 50 Ω Unbalance 50 Ω Part number Part symbol FAR-F5CM-902M50-B263 63 FAR-F5CM-947M50-B260 60 FAR-F5CM-947M50-B262 62 FAR-F5CM-942M50-B270 70 FAR-F5CM-836M50-B268 68 FAR-F5CM-881M50-B266 66 3 F5CM Series (B2) ■ ELECTRICAL CHARACTERISTICS 1. GSM (Tx) 50 ohms Balanced IN/50 ohms Unbalanced OUT Part number: FAR-F5CM-902M50-B263 (Ta = –30°C to + 85°C) Parameter Conditions Value Min. Typ. Max. Unit Insertion loss 890 MHz to 915 MHz — 3.2 3.5 dB Inband ripple 890 MHz to 915 MHz — 1.2 1.5 dB DC to 845 MHz 45 58 — dB 845 MHz to 870 MHz 25 50 — dB 935 MHz to 980 MHz 25 30 — dB 980 MHz to 2000 MHz 40 58 — dB 2000 MHz to 3000 MHz 30 37 — dB Absolute attenuation Remarks 2. GSM (Rx) 50 ohms Unbalanced IN/50 ohms Balanced OUT Part number: FAR-F5CM-947M50-B260 (Ta = –30°C to + 85°C) Parameter Conditions Value Min. Typ. Max. Unit Insertion loss 935 MHz to 960 MHz — 3.0 3.3 dB Inband ripple 935 MHz to 960 MHz — 0.9 1.2 dB DC to 890 MHz 45 56 — dB 890 MHz to 915 MHz 25 31 — dB 980 MHz to 1025 MHz 25 30 — dB 1025 MHz to 2000 MHz 40 50 — dB 2000 MHz to 3000 MHz 35 45 — dB Absolute attenuation Remarks 3. GSM (Rx) 50 ohms Unbalanced IN/150 ohms Balanced OUT Part number: FAR-F5CM-947M50-B262 (Ta = –30°C to + 85°C) Parameter Value Min. Typ. Max. Unit Insertion loss 935 MHz to 960 MHz — 3.3 3.8 dB Inband ripple 935 MHz to 960 MHz — 0.8 1.3 dB DC to 890 MHz 45 55 — dB 890 MHz to 915 MHz 25 48 — dB 980 MHz to 1025 MHz 23 29 — dB 1025 MHz to 2000 MHz 40 50 — dB 2000 MHz to 3000 MHz 35 39 — dB Absolute attenuation 4 Conditions Remarks F5CM Series (B2) 4. EGSM (Rx) 50 ohms Unbalanced IN/50 ohms Balanced OUT Part number: FAR-F5CM-942M50-B270 (Ta = –30°C to + 85°C) Parameter Conditions Value Min. Typ. Max. Unit Insertion loss 925 MHz to 960 MHz — 3.8 4.5 dB Inband ripple 925 MHz to 960 MHz — 1.8 2.5 dB DC to 880 MHz 50 55 — dB 880 MHz to 915 MHz 15 22 — dB 980 MHz to 1025 MHz 23 27 — dB 1025 MHz to 2000 MHz 40 44 — dB 2000 MHz to 3000 MHz 25 39 — dB Absolute attenuation Remarks 5. AMPS/TDMA/CDMA (Tx) 50 ohms Balanced IN/50 ohms Unbalanced OUT Part number: FAR-F5CM-836M50-B268 (Ta = –30°C to + 85°C) Parameter Conditions Value Min. Typ. Max. Unit Insertion loss 824 MHz to 849 MHz — 2.8 3.5 dB Inband ripple 824 MHz to 849 MHz — 0.9 1.6 dB DC to 800 MHz 45 52 — dB 869 MHz to 920 MHz 25 33 — dB 920 MHz to 2000 MHz 35 46 — dB 2000 MHz to 3000 MHz 25 33 — dB Absolute attenuation Remarks 6. AMPS/TDMA/CDMA (Rx) 50 ohms Unbalanced IN/50 ohms Balanced OUT Part number: FAR-F5CM-881M50-B266 (Ta = –30°C to + 85°C) Parameter Conditions Value Min. Typ. Max. Unit Insertion loss 869 MHz to 894 MHz — 2.8 3.5 dB Inband ripple 869 MHz to 894 MHz — 0.8 1.5 dB DC to 800 MHz 45 55 — dB 800 MHz to 849 MHz 30 47 — dB 940 MHz to 1000 MHz 30 38 — dB 1000 MHz to 2000 MHz 35 47 — dB 2000 MHz to 3000 MHz 25 32 — dB Absolute attenuation Remarks 5 F5CM Series (B2) ■ TYPICAL CHARACTERISTICS 1. GSM (Tx) 50 ohms Balanced IN/50 ohms Unbalanced OUT Part number: FAR-F5CM-902M50-B263 log MAG 10 dB/ REF 1 : −3.192 dB 0 dB 0.890 000 000 GHz FAR-F5CM-902M50-B263 1 2 : −2.773 dB 0.9150 GHz 3 : −29.56 dB 0.9350 GHz 4 : −34.57 dB 0.9500 GHz 2 3 4 CENTER 900 MHz SPAN 300 MHz 2. GSM (Rx) 50 ohms Unbalanced IN/50 ohms Balanced OUT Part number: FAR-F5CM-947M50-B260 log MAG 10 dB/ REF FAR-F5CM-947M50-B260 0 dB 1 : −58.133 dB 0.890 000 000 GHz 3 4 2 : −32.723 dB 0.9150 GHz 3 : −2.999 dB 0.9350 GHz 4 : −2.808 dB 0.9600 GHz 2 1 CENTER 6 950 MHz SPAN 300 MHz F5CM Series (B2) 3. GSM (Rx) 50 ohms Unbalanced IN/150 ohms Balanced OUT Part number: FAR-F5CM-947M50-B262 log MAG 10 dB/ REF 0.890 000 000 GHz 1 2 : −50.182 dB 0.9150 GHz 3 : −3.077 dB 0.9350 GHz 4 : −3.028 dB 0.9600 GHz 4 3 CENTER 1 : −55.741 dB 0 dB FAR-F5CM-947M50-B262 2 950 MHz SPAN 300 MHz 4. EGSM(Rx) 50 ohms Unbalanced IN/150 ohms Balanced OUT Part number: FAR-F5CM-942M50-B270 log MAG 10 dB/ REF FAR-F5CM-942M50-B270 0 dB 1 : −3.5649 dB 925. 000 000 MHz 1 2 2 : −2.9961 dB 960 MHz 3 : −59.498 dB 880 MHz 4 : −20.549 dB 915 MHz 4 3 CENTER 950 MHz SPAN 300 MHz 7 F5CM Series (B2) 5. AMSP/TDMA/CDMA (Tx) 50 ohms Balanced IN/50 ohms Unbalanced OUT Part number: FAR-F5CM-836M50-B268 log MAG 10 dB/ REF 1 : −2.566 dB 0 dB FAR-F5CM-836M50-B268 0.824 000 000 GHz 1 2: −2.763 dB 0.8490 GHz 3 : −33.493 dB 0.8690 GHz 4 : −38.685 dB 0.8940 GHz 2 3 4 CENTER 850 MHz SPAN 300 MHz 6. AMSP/TDMA/CDMA (Rx) 50 ohms Unbalanced IN/50 ohms Balanced OUT Part number: FAR-F5CM-881M50-B266 log MAG 10 dB/ REF FAR-F5CM-881M50-B266 CENTER 8 900 MHz 1 : −57.172 dB 0.824 000 000 GHz 3 1 0 dB 4 2 : −48.219 dB 0.8490 GHz 3 : −2.836 dB 0.8690 GHz 4 : −2.825 dB 0.8940 GHz 2 SPAN 300 MHz F5CM Series (B2) ■ MEASURMENT CIRCUIT BALANCED IN/UNBALANCED OUT type (Tx filter) UNBLANCED IN/BALANCED OUT type (Rx filter) 4 4 I nput 50 Ω 2 2 Output 50 Ω 6 1 3 Output 50 Ω/ 150 Ω Input 50 Ω 6 1 3 5 5 1 to 6: Pin Number Note: Attached frequency response plots are obtained by simulation using above S21, S31, S32, S11, S22, S33 of each characteristics. Electrical specifications are also decided based on these results. ■ PART NUMBER DESIGNATION [Designation example] FAR–F5CM– –B2 (1) – (2) (3) (1) Frequency:Center frequency is specified in six alphanumeric. Enter M (for MHz) at the decimal point. Refer to below example. [Example]902.5 MHz ⇒ 902M50 (2) Part symbol: Specified characters from 60 to 79. (3) Packing: Y: 1000 pcs/reel (Reeled tape) X:5000 pcs/reel ■ MARKING LOGO DATE CODE PART SYMBOL F 60 B 1 LOT No. INDEX 9 F5CM Series (B2) ■ PACKAGE DIMENSION 1.2 Max. 3.0 3.0 2−R 0.2 2 3 1.5 0.75 1 6 5 4 0.75 0.6 4−R 0.3 1.2 1.2 Dimensions in mm 10 F5CM Series (B2) ■ RECOMMENDED LAND PATTERN 1.5 3.0 0.75 0.95 3.0 0.2 0.75 1.5 0.70 1.20 1.20 Dimensions in mm 11 F5CM Series (B2) ■ PACKING: Reel type 1. Reel Dimensions 9.5 ± 0.5 1.5 Min. φ 12.8 Min. φ 250 φ 80 Type Volume Y 1 k pcs X 5 k pcs φ 20.2 Min. R 0.58 13.8 Max. Dimensions in mm 2. Packing Style Reel side Pulling side Pulling side 1P IN 3. Tape Dimensions 0.3 ± 0.05 3.3 ± 0.1 φ 1.0 Min. 3.3 ± 0.1 4.0 ± 0.1 8.0 ± 0.2 0.1 φ1.5 ± 0.0 3.5 ± 0.05 2.0 ± 0.05 1.75 ± 0.1 4.0 ± 0.1 1.3 ± 0.1 Dimensions in mm 12 F5CM Series (B2) 4. Peel Strength of Top Cover Tapes Peel off by the force of 0.1 N to 1.0 N under the condition at the right. (Conforms to EIA.) Speed 300 mm/min Direction of pulling 165° to 180° Embossment carrier type tape 13 F5CM Series (B2) ■ RECOMMENDED REFLOW PROFILE 240 Temperature (°C) 10 s Heating rate 1°C/s to 4°C/s 210 Air cooling 60 s Pre-Heating 150 60 s ∼ 90 s Time (s) ■ NOTE Mass-produced product order is accepted by a unit of 1000. 14 F5CM Series (B2) FUJITSU MEDIA DEVICES LIMITED For further information please contact: Japan FUJITSU MEDIA DEVICE LIMITED International Sales & Marketing DEPT. Shin-Yokohama Square Bldg.,14F, Shin-yokohama 2-3-12, Kohoku-ku, Yokohama, Kanagawa 222-0033, Japan Tel: +81-45-471-0061 Fax: +81-45-471-0076 http://edevice.fujitsu.com/fmd/ North and South America FUJITSU MEDIA DEVICES OF AMERICA, INC. 1731 Technology Drive,Suite 800, San Jose, CA 95110 U.S.A. Tel: (1)-408-437-8900 Fax: (1)-408-437-0700 http://www.fujitsumedia.com/ Europe FUJITSU MICROELECTRONICS EUROPE GmbH Am Siebenstein 6-10, D-63303 Dreieich-Buchschlag, Germany Tel: +49-6103-690-0 Fax: +49-6103-690-122 http://www.fujitsu-fme.com/ Asia Pacific FUJITSU MICROELECTRONICS ASIA PTE. LTD. #05-08, 151 Lorong Chuan, New Tech Park, Singapore 556741 Tel: +65-281-0770 Fax: +65-281-0220 http://www.fmap.com.sg/ All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU MEDIA DEVICES sales representatives before ordering. The information and circuit diagrams in this document are presented as examples of device applications, and are not intended to be incorporated in devices for actual use. Also, FUJITSU MEDIA DEVICES is unable to assume responsibility for infringement of any patent rights or other rights of third parties arising from the use of this information or circuit diagrams. The products described in this document are designed, and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated (1) for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss (i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system), or (2) for use requiring extremely high reliability (i.e., submersible repeater and artificial satellite). Please note that Fujitsu will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products. Any electronic devices have inherently a certain rate of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. If any products described in this document represent goods or technologies subject to certain restrictions on export under the Foreign Exchange and Foreign Trade Control Law of Japan, the prior authorization by Japanese government should be required for export of those products from Japan. F0104 FUJITSU LIMITED Printed in Japan