Package Outlines Handling Precautions The FX315 is available in the package styles outlined below. Mechanical package diagrams and specifications are detailed below. Pin 1 identification marking is shown on the relevant diagram and pins on all package styles number anti-clockwise when viewed from the top. The FX315 is a CMOS LSI circuit which includes input protection. However precautions should be taken to prevent static discharges which may cause damage. FX315LG 24-pin quad plastic encapsulated bent and cropped (L1) D A C P E1 G E B J K1 IDENT F (PIN 1) K L T H X W DIM. A B C D E E1 F G H J K K1 L P T W X Z TYP. MIN. MAX. 0.394 (10.00) 0.394 (10.00) 0.404 (10.25) 0.404 (10.25) 0.098 (2.500) 0.616 (15.65) 0.616 (15.65) 0.524 (13.3) 0.250 (6.35) 0.250 (6.35) 0.004 (0.10) 0.022 (0.55) 0.018 (0.45) 0.055 (1.40) 0.045 (1.14) 0.033 (0.845) 0.031 (0.80) 0.039 (1.00) 0.049 (1.24) 0.051 (1.30) 0.006 (0.15) 0.009 (0.22) 45° 6° 6° NOTE : All dimensions in inches (mm.) Angles in degrees Z A & B are reference datums and do not include mold deflash or protrusions FX315P2 14-pin plastic DIL DIM. A Z B E1 E Y M PIN 1 K K1 C H L J J1 P F T A B C E E1 F H J J1 K K1 L M T P Y Z MIN. TYP. MAX. 0.740 (18.80) 0.810 (20.57) 0.240 (6.10) 0.260 (6.60) 0.135 (3.43) 0.175 (4.45) 0.300 (7.62) 0.390 (9.91) 0.290 (7.37) 0.325 (8.26) 0.60 (15.24) 0.015 (0.38) 0.035 (0.89) 0.015 (0.38) 0.023 (0.58) 0.045 (1.14) 0.065 (1.65) 0.056 (1.42) 0.064 (1.63) 0.056 (1.42) 0.064 (1.63) 0.121 (3.07) 0.150 (3.81) 0.072 (1.83) 0.008 (0.20) 0.015 (0.38) 0.100 (2.54) 7° 5° NOTE : All dimensions in inches (mm.) Angles in degrees A & B are reference datums and do not include mold deflash or protrusions Ordering Information FX315LG FX315P2 24-pin encapsulated bent and cropped (L1) 14-pin plastic DIL CML does not assume any responsibility for the use of any circuitry described. No circuit patent licences are implied and CML reserves the right at any time without notice to change the said circuitry.