Unity Opto Technology Co., Ltd. MVL-324GD MVL-324YD MVL-324HRD MVL-324DRD MVL-324URD Description Package Dimensions φ3.80±0.30 (.150±.012) The MVL-324xxD series package are T-1 (φ3mm) standard flange water clear plastic lens package. The Hi-EFF red (HR) and yellow LED chips are made with Gallium Arsenide Phosphide on Gallium Phosphide diode. The green LED chip is made with Gallium Phosphide on Gallium Phosphide diode. The red (DR) chip is made with Aluminum Gallium Arsenide on Gallium Arsenide diode. The red (UR) chip is made with Aluminum Gallium Arsenide on Aluminum Gallium Arsenide diode. φ 3.50±0.25 (.138±.010) Unite: mm ( inches ) φ 3.10±0.20 (.122±.008) 4.10±0.20 (.161±.008) 5.20±0.30 (.205±.012) 0.50 TYP. (.020) Applications 25.40MIN. (1.000) l Popular T-1 (φ3mm) diameter package Selected minimum intensities l General purpose leads l Reliable and rugged 1.00MIN. (.040) l 2.54 (.100) A C Notes : 1. Tolerance is ± 0.25 mm (.010") unless otherwise noted. 2. Protruded resin under flange is 1.5 mm (.059") max. 3. Lead spacing is measured where the leads emerge from the package. Absolute Maximum Tatings Parameter 3.80 (.150 Symbol Power Dissipation Peak Forward Current (1/10 Duty Cycle 0.1ms pulse width) Continuous Forward Current Pad Ipf Iaf Derating Linear From 25oC Reverse Voltage Operating Temperature Range Storage Temperature Range VR Topr Tstg Lead Soldering Temperature (1.6mm from body) for 3 seconds at 260oC P1 Maximum Rating GREEN YELLOW 100 120 30 0.4 5 60 80 20 0.25 5 HR DR/UR 100 120 30 0.4 5 -55oC to + 100oC -55oC to + 100oC 100 120 40 0.5 5 Unit mW A mA/oC mA V Optical -Electrical Characteristics Typ . 45 2.1 565 30 45 @TA=25oC Max . Unit . mcd 2.8 V 100 µA nm nm deg Typ . 30 2.1 585 35 45 @TA=25oC Max . Unit . mcd 2.8 V 100 µA nm nm deg Typ . 40 2.0 640 40 45 @TA=25oC Max . Unit . mcd 2.8 V 100 µA nm nm deg Typ . 200 1.8 660 20 45 @TA=25oC Max . Unit . mcd 2.4 V 100 µA nm nm deg Typ . 400 1.8 660 20 45 @TA=25oC Max . Unit . mcd 2.4 V 100 µA nm nm deg Part No. : MVL-324GD Parameter Luminous Intensity Forward Voltage Reverse Current Wavelength Spectral Line Half Width Viewing Angle Test Conditions IF=10mA IF=20mA VR=5V IF=20mA IF=20mA IF=20mA Symbol IV VF IR λp ∆λ 2θ1/2 Min . 14.0 - Part No. : MVL-324YD Parameter Luminous Intensity Forward Voltage Reverse Current Wavelength Spectral Line Half Width Viewing Angle Test Conditions IF=10mA IF=20mA VR=5V IF=20mA IF=20mA IF=20mA Symbol IV VF IR λp ∆λ 2θ1/2 Min . 8.0 - Part No. : MVL-324HRD Parameter Luminous Intensity Forward Voltage Reverse Current Wavelength Spectral Line Half Width Viewing Angle Test Conditions IF=10mA IF=20mA VR=5V IF=20mA IF=20mA IF=20mA Symbol IV VF IR λp ∆λ 2θ1/2 Min . 12.0 - Part No. : MVL-324DRD Parameter Luminous Intensity Forward Voltage Reverse Current Wavelength Spectral Line Half Width Viewing Angle Test Conditions IF=20mA IF=20mA VR=5V IF=20mA IF=20mA IF=20mA Symbol IV VF IR λp ∆λ 2θ1/2 Min . 50 - Part No. : MVL-324URD Parameter Luminous Intensity Forward Voltage Reverse Current Wavelength Spectral Line Half Width Viewing Angle Test Conditions IF=20mA IF=20mA VR=5V IF=20mA IF=20mA IF=20mA Symbol IV VF IR λp ∆λ 2θ1/2 P2 Min . 100 - Typical Optical-Electrical Characteristic Curves G Y HR DR/UR DR/UR HR Y 50 Forward Current IF(mA) Relative Luminous Intensity 1 0.5 0 40 30 20 10 0 500 550 600 650 700 750 0.8 1.2 1.6 2.0 2.4 2.8 Forward Voltage (V) Fig 2. FORWARD CURRENT VS. FORWARD VOLTAGE Wavelength (nm) Fig 1. RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH 50 5.0 Relative Luminous Intensity Forward Current IF (mA) G DR/UR 40 G/HR 30 Y 20 10 4.0 3.0 2.0 1.0 0.0 0 0 20 40 60 80 0 100 Ambient Temperature (oC) Fig 3. FORWARD CURRENT VS. AMBIENT TEMPERATURE 10 20 30 40 50 Forward Current IF (mA) Fig 4. RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT 0o 10o 20o Relative Luminous Intensity Relative Luminous Intensity 10 1 30o 40o 50o 1.0 0.9 60o 70o 80o 90o 0.8 0.1 0.5 0.3 0.1 -30 -20 -10 0 10 20 30 40 50 60 70 Ambient Temperature (oC) Fig 5. RELATIVE LUMINOUS INTENSITY VS. AMBIENT TEMPERATURE 0.2 0.4 0.6 Fig 6. RADIATION DIAGRAM P3