MICROCIRCUIT DATA SHEET Original Creation Date: 02/03/97 Last Update Date: 07/14/00 Last Major Revision Date: 02/03/97 MV54ACTQ16245-X REV 0B0 16-Bit Transceiver with TRI-STATE Outputs General Description The ACTQ16245 contains sixteen non-inverting bidirectional buffers with TRI-STATE outputs and is intended for bus oriented applications. The device is byte controlled. Each has separate control inputs which can be shorted together for full 16-bit operation. The T/R inputs determine the direction of data flow through the device. The OE inputs disable both the A and B ports by placing them in a high impedance state. The ACTQ16245 utilizes NSC Quiet Series technology to guarantee quiet output switching and improved dynamic threshold performance. FACT Quiet Series TM features GTO TM output control for superior performance. Industry Part Number NS Part Numbers 54ACTQ16245 54ACTQ16245W-QV Prime Die D16245 Controlling Document SEE FEATURES SECTION Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 C +125 C -55 C +25 C +125 C -55 C +25 C +125 C -55 C +25 C +125 C -55 C MICROCIRCUIT DATA SHEET MV54ACTQ16245-X REV 0B0 Features - Utilizes NSC FACT Quiet Series technology Guaranteed simultaneous switching noise level and dynamic threshold performance Guaranteed pin-to-pin output skew Bidirectional non-inverting buffers Separate control logic for each byte 16-bit version of the ACTQ245 Outputs source/sink 24 mA Additional specs for multiple output switching Output loading specs for both 50pF and 250pF loads CONTROLLING DOCUMENTS: 54ACTQ16245W-QV 5962-9562001VXA 2 MICROCIRCUIT DATA SHEET MV54ACTQ16245-X REV 0B0 (Absolute Maximum Ratings) (Note 1) Supply Voltage (Vcc) -0.5V to +7.0V DC Output Diode Current (Iok) Vo = -0.5V Vo = Vcc +0.5V DC Output Voltage (Vo) -20 mA +20 mA -0.5V to Vcc +0.5V Storage Temperature (Tstg) -65 C to + 150 C DC Input Diode Current (Iik) Vin = -0.5V Vin = Vcc +0.5V DC Vcc or Ground Current per Output Pin -20 mA +20 mA +50 mA DC Output Source or Sink Current (Io) +50 mA Junction Temperature (Tj) Ceramic Flatpack Thermal Resistance Junction-To-Case (Theta JC) Junction-To-Ambient (Theta JA) (1 Watt at no airflow) Lead Temperature (Soldering , 10 Seconds) ESD Clasification +175 C 10 C/Watt 80 C/Watt + 300 C 1500V Maximum Power Dissipation 750 mW Note 1: Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met. without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. National does not recommend operation of FACT TM circuits outside databook specifications. Recommended Operating Conditions Supply Voltage (Vcc) 4.5V to 5.5V Input Voltage (Vi) 0V to Vcc Output Voltage (Vo) 0V to Vcc Operating Temperature -55 C to +125 C Minimum Input Edge Rate (Delta V/Delta t) ACTQ Devices Vin from 0.8V to 2.0V Vcc @ 4.5V, 5.5V Maximum Output Current High Level (IOH) Low Level (IOL) 125 mV/ns -24 mA 24 mA 3 MICROCIRCUIT DATA SHEET MV54ACTQ16245-X REV 0B0 Electrical Characteristics DC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) DC: VCC 4.5V to 5.5V, Temp. Range: -55C to 125C. SYMBOL IIH IIL VOL PARAMETER High Level input Current Low Level input Current Low level output voltage CONDITIONS NOTES VCC=5.5V, VIH=5.5V PINNAME MIN MAX UNIT SUBGROUPS 1, 2 INPUT 0.1 uA 1 1, 2 INPUT 1.0 uA 2, 3 1, 2 INPUT -0.1 uA 1 1, 2 INPUT -1.0 uA 2, 3 1, 2 OUTPUT .36 V 1 1, 2 OUTPUT .50 V 2, 3 VCC=4.5V, VIL=0.8V, IOL=50.0uA, VIH=2.0V 1, 2 OUTPUT .10 V 1, 2, 3 VCC=5.5V, VIL=0.8V, IOL=24.0mA, VIH=2.0V 1, 2 OUTPUT .36 V 1 1, 2 OUTPUT .50 V 2, 3 VCC=5.5V, VIL=0.8V, IOL=50.0uA, VIH=2.0V 1, 2 OUTPUT .10 V 1, 2, 3 1.65 V 1, 2, 3 VCC=5.5V, VIL=0.0V VCC=4.5V, VIL=0.8V, IOL=24.0mA, VIH=2.0V VIOL Dynamic Output Current LOW VCC=5.5V, VIH=5.5V, VIL=0.0V, IOL=50.0mA 1, OUTPUT 2, 5 VOH High Level Output Voltage VCC=4.5V, VIL=0.8V, IOL=-24.0mA, VIH=2.0V 1, 2 OUTPUT 3.86 V 1 1, 2 OUTPUT 3.70 V 2, 3 VCC=4.5V, VIL=0.8V, IOL=-50.0uA, VIH=2.0V 1, 2 OUTPUT 4.40 V 1, 2, 3 VCC=5.5V, VIL=0.8V, IOL=-24.0mA, VIH=2.0V 1, 2 OUTPUT 4.86 V 1 1, 2 OUTPUT 4.70 V 2, 3 VCC=5.5V, VIL=0.8V, IOL=-50.0uA, VIH=2.0V 1, 2 OUTPUT 5.40 V 1, 2, 3 V 1, 2, 3 750 nA 1 160 uA 2, 3 750 nA 1 160 uA 2, 3 750 nA 1 160 uA 2, 3 750 nA 1 160 uA 2, 3 VIOH Dynamic Output Current HIGH VCC=5.5V, VIH=5.5V, VIL=0.0V, IOL=-50.0mA 1, OUTPUT 2, 5 3.85 ICCH Supply Current Outputs High VCC=5.5V, VIN=5.5V or Gnd 1, 2 VCC -50 1, 2 VCC ICCL Supply Current Output Low VCC=5.5V, VIN=5.5V or Gnd 1, 2 VCC -50 1, 2 VCC ICCZ Supply Current VCC=5.5V, VIN=5.5V or Gnd 1, 2 VCC -50 1, 2 VCC ICCF Supply Current Functional VCC=5.5V, VIN=5.5V or Gnd 1, 2 VCC 1, 2 VCC 4 -50 MICROCIRCUIT DATA SHEET MV54ACTQ16245-X REV 0B0 Electrical Characteristics DC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: VCC 4.5V to 5.5V, Temp. Range: -55C to 125C. SYMBOL ICCT IOZHT PARAMETER Supply Current Maximum I/O Leakage Current CONDITIONS NOTES VCC=5.5V, VINH=3.4V VCC=4.5V, VOUT=4.5V, VIL=0.0V, VIH(OE)=2.0V VCC=5.5V, VOUT=5.5V, VIL=0.0V, VIH(OE)=2.0V IOZLT Maximum I/O Leakage Current VCC=4.5V, VOUT=4.5V, VIL=0.0V, VIH(OE)=2.0V VCC=5.5V, VOUT=5.5V, VIL=0.0V, VIH(OE)=2.0V PINNAME MIN MAX UNIT SUBGROUPS 1, 2 VCC 1.0 mA 1 1, 2 VCC 1.6 mA 2, 3 1, 2 OUTPUT 0.5 uA 1 1, 2 OUTPUT 10 uA 2, 3 1, 2 OUTPUT 0.5 uA 1 1, 2 OUTPUT 10 uA 2, 3 1, 2 OUTPUT -0.5 uA 1 1, 2 OUTPUT -10 uA 2, 3 1, 2 OUTPUT -0.5 uA 1 1, 2 OUTPUT -10 uA 2, 3 VIKL VCC=4.5V, IKL=-18mA 1, 2 INPUT -1.2 V 1, 2, 3 VIKH VCC=4.5V, IKH=18mA 1, 2 INPUT 5.7 V 1, 2, 3 CIN INPUT PIN CAPACITANCE CONTROL PINS 6 INPUT 5 pF 4 CIN INPUT PIN CAPACITANCE - I/O PINS 6 INPUT 15 pF 4 COUT OUTPUT PIN CAPACITANCE 6 OUTPUT 15 pF 4 CPD POWER DISSIPATION CAPACITANCE VCC=5.0V 6 100 pF 4 VILD Maximum Low Dynamic Input Voltage Level VCC=5.0V, LOAD 50pF / 500 OHMS 6, 9 INPUT 0.8 V 4 VIHD Minimum High Dynamic Input Voltage Level VCC=5.0V, LOAD 50pF / 500 OHMS 6, 9 INPUT V 4 VOLP Quiet Output Maximum Dynamic Vol VCC=5.0V, LOAD 50pF / 500 OHMS Maximum High Output Noise 6, 8 OUTPUT 0.8 V 4 VOLV Quiet Output Minimum Dynamic Vol VCC=5.0V, LOAD 50pF / 500 OHMS Maximum Low Output Noise 6, 8 OUTPUT -0.8 V 4 VOHP Maximum Overshoot VCC=5.0V, LOAD 50pF / 500 OHMS Maximum Overshoot 6, 8 OUTPUT VOH +1.0 V 4 VOHV Minimum Vcc Droop VCC=5.0V, LOAD 50pF / 500 OHMS Minimum Vcc Droop 6, 8 OUTPUT VOH -1.6 V 4 5 2.0 MICROCIRCUIT DATA SHEET MV54ACTQ16245-X REV 0B0 Electrical Characteristics AC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) AC: CL=50pf, RL=500 OHMS, TR/TF=3.0ns, Temp range: -55C to +125C. SYMBOL tpLH tpHL tpLZ tpHZ tpZL tpZH PARAMETER Propagation Delay Propagation Delay Output Disable Time Output Disable Time Output Enable Time Output Enable Time CONDITIONS NOTES VCC=4.5V VCC=4.5V VCC=4.5V VCC=4.5V VCC=4.5V VCC=4.5V PINNAME MIN MAX UNIT SUBGROUPS 3, An/Bn 4, 7 to Bn/An 2.0 8.0 ns 9 3, An/Bn 4, 7 to Bn/An 2.0 9.5 ns 10, 11 3, An/Bn 4, 7 to Bn/An 2.0 8.0 ns 9 3, An/Bn 4, 7 to Bn/An 2.0 9.5 ns 10, 11 3, OE to 4, 7 An/Bn 1.5 8.0 ns 9 3, OE to 4, 7 An/Bn 1.5 9.5 ns 10, 11 3, OE to 4, 7 An/Bn 1.5 8.0 ns 9 3, OE to 4, 7 An/Bn 1.5 9.5 ns 10, 11 3, OE to 4, 7 An/Bn 2.5 10.5 ns 9 3, OE to 4, 7 An/Bn 2.5 13.0 ns 10, 11 3, OE to 4, 7 An/Bn 2.5 9.5 ns 9 3, OE to 4, 7 An/Bn 2.5 11.0 ns 10, 11 TOSHL Pin to Pin Skew HL Data to Output VCC=4.5V 6 Pin to Pin Skew 1.2 ns 9, 10, 11 TOSLH Pin to Pin Skew LH Data to Output VCC=4.5V 6 Pin to Pin Skew 1.3 ns 9, 10, 11 TOST Pin to Pin Skew LH/HL Data to Output VCC=4.5V 6 Pin to Pin Skew 3.0 ns 9, 10, 11 Note 1: Note 2: Note 3: Note 4: Note 5: SCREEN TESTED 100% ON EACH DEVICE AT +25C & +125C TEMPERATURE, SUBGROUPS 1, 2, 7, & 8. SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C, +125C, & -55C TEMPERATURE, SUBGROUPS A1, 2, 3, 7, & 8. SCREEN TESTED 100% ON EACH DEVICE AT +25C TEMPERATURE ONLY SUBGROUP A9. SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C, +125C, & -55C TEMPERATURE, SUBGROUPS A9, 10, & 11. TRANSMISSION LINE DRIVING TEST, GUARDBANDED LIMITS SET FOR +25C, 2 MSEC DURATION MAX. 6 MICROCIRCUIT DATA SHEET MV54ACTQ16245-X REV 0B0 (Continued) Note 6: Note 7: Note 8: Note 9: GUARANTEED BUT NOT TESTED. (DESIGN CHARACTERIZATION DATA) +25C & +125C MIN LIMITS GUARANTEED FOR 5.5V BY GUARDBANDING 4.5V MIN. LIMITS. MAX NUMBER OF OUTPUTS DEFINED AS (N). DATA INPUTS ARE DRIVEN 0V TO 3V. ONE OUTPUT @ VOL. MAX NUMBER OF DATA INPUTS (N) SWITCHING. (N-1) INPUTS SWITCHING 0V TO 3V. INPUT-UNDER-TEST SWITCHING 3V TO THRESHOLD (VILD), 0V TO THRESHOLD (VIHD), FREQ= 1 MHZ. 7 MICROCIRCUIT DATA SHEET MV54ACTQ16245-X REV 0B0 Revision History Rev ECN # 0B0 M0003737 07/14/00 Rel Date Originator Changes Rose Malone Update MDS: MV54ACTQ16245-X, Rev. 0A0 to MV54ACTQ16245-X, Rev. 0B0. Changed ESD rating from Class 1 to 1500V in Absolute Section. Changed ICC Parameter to ICCH and Added ICCL, ICCZ, ICCF, typo error for VOHV Parameter max. limit from VOH -1.0V to -1.6V to match the SMD drawing. 8