MICROCIRCUIT DATA SHEET Original Creation Date: 07/11/96 Last Update Date: 04/27/99 Last Major Revision Date: 03/02/99 MN54ACTQ10-X REV 2A0 Triple 3-Input NAND Gate General Description The ACTQ10 contain three, 3- Input NAND gates and utilizes NSC Quiet Series technology to guarantee quiet output switching and inproved dynamic threshold performance. FACT Quiet Series features GTO output control and undershoot corrector in addition to a split ground bus for superior ACMOS performance. Industry Part Number NS Part Numbers 54ACTQ10 54ACTQ10DMQB* 54ACTQ10FMQB** 54ACTQ10LMQB*** Prime Die D010 Controlling Document 5962-92182 Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 C +125 C -55 C +25 C +125 C -55 C +25 C +125 C -55 C +25 C +125 C -55 C MICROCIRCUIT DATA SHEET MN54ACTQ10-X REV 2A0 Features - Icc reduced by 50% Guaranteed simultaneous switching noise level and dynamic threshold performance Improved latch-up immunity Minimum 2kV ESD protection Outputs source/sink 24 mA ACTQ 10 has TTL-compatible inputs Standard Military Drawing (SMD) - ACTQ10: 5962-9218201MCX*, MDX**, M2X*** 2 MICROCIRCUIT DATA SHEET MN54ACTQ10-X REV 2A0 (Absolute Maximum Ratings) (Note 1) Supply Voltage (Vcc) -0.5V to +7.0V DC Input Diode Current (Iik) Vi = -0.5V Vi=Vcc +0.5V DC Input Voltage (Vi) -20 mA +20 mA -0.5V to Vcc +0.5V DC Output Diode Current (Iok) Vo = -0.5V Vo = Vcc +0.5V DC Output Voltage (Vo) -20 mA +20 mA -0.5V to Vcc +0.5V DC Output Source or Sink Current (Io) +50 mA DC Vcc or Ground Current per Output Pin (Icc or Ignd) +50 mA Storage Temperature (Tstg) -65 C to +150 C DC Latch-Up Source or Sink Current +300 mA Junction Temperature (Tj) CDIP PDIP Note 1: 175 C 140 C Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. National does not recommend operation of FACT TM circuits outside databook specifications. Recommended Operating Conditions (Note 1) Supply Voltage (Vcc) 4.5V to 5.5V Input Voltage (Vi) 0V to Vcc Output Voltage (Vo) 0V to Vcc Operating Temperature (Ta) -55 C to +125 C Minimum Input Edge Rate (Delta V/Delta t) ACTQ Devices Vin from 0.8V to 2.0V Vcc @ 4.5V, 5.5V Note 1: 125 mV/ns PLCC packaging is not recommended for applications requiring greater than 2000 temperature cycles from -40C to + 125C. 3 MICROCIRCUIT DATA SHEET MN54ACTQ10-X REV 2A0 Electrical Characteristics DC PARAMETER (The following conditions apply to all the following parameters, unless otherwise specified.) DC: VCC 4.5V to 5.5V, Temp. Range: -55C to 125C. NOTE: -55C TEMPERATURE, SUBGROUP 3 IS GUARANTEED BUT NOT TESTED. SYMBOL IIH IIL VOL PARAMETER High Level input Current Low Level input Current Low level output voltage CONDITIONS NOTES VCC=5.5V, VIH=5.5V PINNAME MIN MAX UNIT SUBGROUPS 1, 2 INPUT 0.1 uA 1 1, 2 INPUT 1.0 uA 2, 3 1, 2 INPUT -0.1 uA 1 1, 2 INPUT -1.0 uA 2, 3 VCC=4.5V, VIH=2.0V, VIL=0.8V, IOL=50.0uA 1, 2 OUTPUT .10 V 1, 2, 3 VCC=5.5V, VIH=2.0V, VIL=0.8V, IOL=50.0uA 1, 2 OUTPUT .10 V 1, 2, 3 VCC=4.5V, VIH=2.0V, VIL=0.8V, IOL=24.0mA 1, 2 OUTPUT .36 V 1 1, 2 OUTPUT .50 V 2, 3 1, 2 OUTPUT .36 V 1 1, 2 OUTPUT .50 V 2, 3 1.65 V 1, 2, 3 VCC=5.5V, VIL=0.0V VCC=5.5V, VIH=2.0V, VIL=0.8V, IOL=24.0mA VIOL Dynamic Output Current LOW VCC=5.5V, VIH=5.5V, VIL=0.0V, IOL=50.0mA 1, OUTPUT 2, 5 VOH High Level Output Voltage VCC=4.5V, VIH=2.0V, VIL=0.8V, IOL=-50.0uA 1, 2 OUTPUT 4.40 V 1, 2, 3 VCC=5.5V, VIH=2.0V, VIL=0.8V, IOL=-50.0uA 1, 2 OUTPUT 5.40 V 1, 2, 3 VCC=4.5V, VIH=2.0V, VIL=0.8V, IOL=-24.0mA 1, 2 OUTPUT 3.86 V 1 1, 2 OUTPUT 3.70 V 2, 3 1, 2 OUTPUT 4.86 V 1 1, 2 OUTPUT 4.70 V 2, 3 3.85 V 1, 2, 3 VCC=5.5V, VIH=2.0V, VIL=0.8V, IOL=-24.0mA VIOH Dynamic Output Current High VCC=5.5V, VIH=5.5V, VIL=0.0V, IOL=-50.0mA 1, OUTPUT 2, 5 ICCH Supply Current VCC=5.5V, VIH=5.5V 1, 2 VCC 2.0 uA 1 1, 2 VCC 40 uA 2, 3 1, 2 VCC 2.0 uA 1 1, 2 VCC 40 uA 2, 3 1, 2 VCC 1.0 mA 1 1, 2 VCC 1.6 mA 2, 3 ICCL ICCT Supply Current Supply Current VCC=5.5V, VIH=0.0V VCC=5.5V, VIH=3.4V VIKL VCC=4.5V, IKL=-18mA 1, 2 INPUT -1.2 V 1, 2, 3 VIKH VCC=4.5V, IKH=18mA 1, 2 INPUT 5.7 V 1, 2, 3 4 MICROCIRCUIT DATA SHEET MN54ACTQ10-X REV 2A0 Electrical Characteristics DC PARAMETER(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: VCC 4.5V to 5.5V, Temp. Range: -55C to 125C. NOTE: -55C TEMPERATURE, SUBGROUP 3 IS GUARANTEED BUT NOT TESTED. SYMBOL PARAMETER CONDITIONS NOTES PINNAME VILD Maximum Low Level Dynamic Input Voltage VCC=5.0V, LOAD 50pF / 500 OHMS 6, 9 INPUT VIHD Minimum High Level Dynamic Input Voltage VCC=5.0V, LOAD 50pF / 500 OHMS 6, 9 INPUT VOLP Quiet Output Maximum Dynamic VOL VCC=5.0V, LOAD 50pF / 500 OHMS 6, 8 OUTPUT VOLV Quiet Output Minimum Dynamic VOL VCC=5.0V, LOAD 50pF / 500 OHMS VOHV Quiet Output Minimum Dynamic VOH VOHP Quiet Output Maximum Dynamic VOH MIN MAX 0.8 UNIT SUBGROUPS V 4 V 4 1.5 V 4 6, 8 OUTPUT -1.2 V 4 VCC=5.0V, LOAD 50pF / 500 OHMS 6, 10 OUTPUT VOH -1.0 V 4 VCC=5.0V, LOAD 50pF / 500 OHMS 6, 10 OUTPUT VOH +1.0 V 4 2.2 AC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) AC: CL=50pf, RL=500 OHMS, TR=3.0ns & TF=3.0ns, Temp range: -55C to +125C. NOTE: -55C TEMPERATURE, SUBGROUP 11 IS GUARANTEED BUT NOT TESTED. tpLH tpHL Propagation Delay Propagation Delay VCC = 4.5V VCC = 4.5V 3, An/Bn/C 2.0 4, 7 n to On 8.0 ns 9 3, An/Bn/C 2.0 4, 7 n to On 9.5 ns 10, 11 3, An/Bn/C 2.0 4, 7 n to On 8.0 ns 9 3, An/Bn/C 2.0 4, 7 n to On 9.5 ns 10, 11 tOSLH Output to Output Skew VCC = 4.5V 6 On to On 1.0 ns 9, 10, 11 tOSHL Output to Output Skew VCC = 4.5V 6 On to On 1.0 ns 9, 10, 11 Note 1: Note 5: SCREEN TESTED 100% ON EACH DEVICE AT +25C & +125C TEMPERATURE, SUBGROUPS 1, 2, 7, & 8. SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C & +125C TEMPERATURE, SUBGROUPS A1, 2, 7, & 8. SCREEN TESTED 100% ON EACH DEVICE AT +25C TEMPERATURE ONLY SUBGROUP A9. SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C & +125C TEMPERATURE, SUBGROUPS A9 & 10. TRANSMISSION LINE DRIVING TEST, GUARDBANDED LIMITS SET FOR +25C, 2 MSEC DURATION MAX. Note 6: Note 7: GUARANTEED BUT NOT TESTED. (DESIGN CHARACTERIZATION DATA) +25C & +125C MIN LIMITS GUARANTEED FOR 5.5V BY GUARDBANDING 4.5V MINIMUM LIMITS. Note 2: Note 3: Note 4: 5 MICROCIRCUIT DATA SHEET MN54ACTQ10-X REV 2A0 (Continued) Note 8: MAX NUMBER OF OUTPUTS DEFINED AS (N). DATA INPUTS ARE DRIVEN 0V TO 3V. ONE OUTPUT @ VOL. Note 9: MAX NUMBER OF DATA INPUTS (N) SWITCHING. (N-1) INPUTS SWITCHING 0V TO 3V. INPUT-UNDER-TEST SWITCHING 3V TO THRESHOLD (VILD), 0V TO THRESHOLD (VIHD), FREQ= 1 MHZ. Note 10: MAXIMUM NUMBER OF OUTPUTS DEFINED AS (N). DATA INPUTS ARE DRIVEN 0V TO 3V. ONE OUTPUT @ VOH. 6 MICROCIRCUIT DATA SHEET MN54ACTQ10-X REV 2A0 Revision History Rev ECN # 2A0 M0003290 04/27/99 Rel Date Originator Changes Linda Collins Added VOHV and VOHP. Added note 10. Changed the test conditions for VIOH from VIH=2.0V to VIH=5.5V and VIL=0.8V to VIL=0.0V. 7