MILITARY DATA SHEET Original Creation Date: 03/26/96 Last Update Date: 07/30/96 Last Major Revision Date: 03/26/96 MN54F190-X REV 1A0 UP/DOWN DECADE COUNTER WITH PRESET AND RIPPLE CLOCK General Description The F190 is a reversible BCD (8421) decade counter featuring synchronous counting and asynchronous presetting. The preset feature allows the F190 to be used in programmable deviders. The Count Enable input, the Terminal Count output and the Ripple Clock output make possible a variety of methods of implementing multistage counters. In the counting modes, state changes are initiated by the rising edge of the clock. Industry Part Number NS Part Numbers 54F190 54F190DMQB 54F190FMQB 54F190LMQB Prime Die M190 Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 MILITARY DATA SHEET MN54F190-X REV 1A0 Features - High-speed-125 MHZ Typical Count Frequency Synchronous Counting Asynchronous Parallel Load Cascadable 2 MILITARY DATA SHEET MN54F190-X REV 1A0 (Absolute Maximum Ratings) (Note 1) Storage Temperature -65 C to +150 C Ambient Temperature under Bias -55 C to +125 C Junction Temperature under Bias -55 C to +175 C Vcc Pin Potential to Ground Pin -0.5V to +7.0V Input Voltage (Note 2) -0.5V to +7.0V Input Current (Note 2) -30 mA to +5.0mA Voltage Applied to Output in HIGH State (with Vcc=0V) Standard Output TRI-STATE Output Current Applied to Output in LOW State (Max) -0.5V to Vcc -0.5V to +5.5V twice the rated Iol(mA) Note 1: Note 2: Absolute Maximum ratings are those values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. Either voltage limit or current limit is sufficient to protect inputs. Recommended Operating Conditions Free Air Ambient Temperature Commercial Military Supply Voltage Military Commercial 0 C to +70 C -55 C to +125 C +4.5V to +5.5V +4.5V to +5.5V 3 MILITARY DATA SHEET MN54F190-X REV 1A0 Electrical Characteristics DC PARAMETER (The following conditions apply to all the following parameters, unless otherwise specified.) DC: VCC 4.5V to 5.5V, -55C to 125C SYMBOL PARAMETER CONDITIONS NOTES PINNAME MIN MAX UNIT SUBGROUPS IIH Input High Current VCC=5.5V, VM=2.7V, VINH=5.5V 1, 3 INPUTS 20 uA 1, 2, 3 IBVI Input High Current VCC=5.5V, VM=7.0V, VINH=5.5V 1, 3 INPUTS 100 uA 1, 2, 3 IIL(1) Input LOW Current VCC=5.5V, VM=0.5V, VINL=0.0V, VINH=5.5V 1, 3 OTHER -0.6 mA 1, 2, 3 VOL Output LOW Voltage VCC=4.5V, VIL=0.8V, VIH=2.0V, IOL=20mA 1, 3 OUTPUTS 0.5 V 1, 2, 3 VOH Output High Voltage VCC=4.5V, VIL=0.8V, VINH=5.5, VIH=2.0V, VINL=0.0V, IOH=-1.0mA 1, 3 OUTPUTS 2.5 V 1, 2, 3 IOS Output Short Circuit Current VCC=5.5V, VINH=5.5V, VM=0.0V, VINL=0.0V 1, 3 OUTPUTS -60 -150 mA 1, 2, 3 VCD Input Clamp Diode Voltage VCC=4.5V, IM=-18mA, VINH=5.5V 1, 3 INPUTS -1.2 V 1, 2, 3 ICC Power Supply Current VCC=5.5V, VINL=0.0V 1, 3 VCC 55 mA 1, 2, 3 ICEX Output High Leakage Current VCC=5.5V, VINL=0.0V 1, 3 Outputs 250 uA 1, 2, 3 IIL(2) Input LOW Current VCC=5.5V, VM=0.5V, VINH=5.5V 1, 3 CE -1.8 mA 1, 2, 3 AC PARAMETER (The following conditions apply to all the following parameters, unless otherwise specified.) AC: CL=50pf, RL=500 OHMS, TR=2.5ns, TF=2.5ns SEE AC FIGS tpLH(1) tpHL(1) tpLH(2) tpHL(2) Propagation Delay Propagation Delay Propagation Delay Propagation Delay VCC=5.5V @25C, VCC=4.5 & 5.5V @ -55C/125C VCC=5.5V @25C, VCC=4.5 & 5.5V @ -55C/125C VCC=5.5V @25C, VCC=4.5 & 5.5V @ -55C/125C VCC=5.5V @25C, VCC=4.5 & 5.5V @ -55C/125C 4 2, 4 CP to Qn 3.0 7.5 ns 9 2, 4 CP to Qn 3.0 9.5 ns 10, 11 2, 4 CP to Qn 5.0 11.0 ns 9 2, 4 CP to Qn 5.0 13.5 ns 10, 11 2, 4 CP to TC 6.0 13.0 ns 9 2, 4 CP to TC 6.0 16.5 ns 10, 11 2, 4 CP to TC 5.0 11.0 ns 9 2, 4 CP to TC 5.0 13.5 ns 10, 11 MILITARY DATA SHEET MN54F190-X REV 1A0 Electrical Characteristics AC PARAMETER(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) AC: CL=50pf, RL=500 OHMS, TR=2.5ns, TF=2.5ns SEE AC FIGS SYMBOL tpLH(3) tpHL(3) tpLH(4) tpHL(4) tpLH(5) tpHL(5) tpLH(6) tpHL(6) tpLH(7) tpHL(7) PARAMETER Propagation Delay Propagation Delay Propagation Delay Propagation Delay Propagation Delay Propagation Delay Propagation Delay Propagation Delay Propagation Delay Propagation Delay CONDITIONS NOTES VCC=5.5V @25C, VCC=4.5 & 5.5V @ -55C/125C VCC=5.5V @25C, VCC=4.5 & 5.5V @ -55C/125C VCC=5.5V @25C, VCC=4.5 & 5.5V @ -55C/125C VCC=5.5V @25C, VCC=4.5 & 5.5V @ -55C/125C VCC=5.5V @25C, VCC=4.5 & 5.5V @ -55C/125C VCC=5.5V @25C, VCC=4.5 & 5.5V @ -55C/125C VCC=5.5V @25C, VCC=4.5 & 5.5V @ -55C/125C VCC=5.5V @25C, VCC=4.5 & 5.5V @ -55C/125C VCC=5.5V @25C, VCC=4.5 & 5.5V @ -55C/125C VCC=5.5V @25C, VCC=4.5 & 5.5V @ -55C/125C 5 PINNAME MIN MAX UNIT SUBGROUPS 2, 4 CP to RC 3.0 7.5 ns 9 2, 4 CP to RC 3.0 9.5 ns 10, 11 2, 4 CP to RC 3.0 7.0 ns 9 2, 4 CP to RC 3.0 9.0 ns 10, 11 2, 4 Pn to Qn 3.0 7.0 ns 9 2, 4 Pn to Qn 3.0 9.0 ns 10, 11 2, 4 Pn to Qn 6.0 13.0 ns 9 2, 4 Pn to Qn 6.0 16.0 ns 10, 11 2, 4 CE to RC 3.0 7.0 ns 9 2, 4 CE to RC 3.0 9.0 ns 10, 11 2, 4 CE to RC 3.0 7.0 ns 9 2, 4 CE to RC 3.0 9.0 ns 10, 11 2, 4 PL to Qn 5.0 11.0 ns 9 2, 4 PL to Qn 5.0 13.0 ns 10, 11 2, 4 PL to Qn 5.5 12.0 ns 9 2, 4 PL to Qn 5.5 14.5 ns 10, 11 2, 4 U/D to RC 7.0 18.0 ns 9 2, 4 U/D to RC 7.0 22.0 ns 10, 11 2, 4 U/D to RC 5.5 12.0 ns 9 2, 4 U/D to RC 5.5 14.0 ns 10, 11 MILITARY DATA SHEET MN54F190-X REV 1A0 Electrical Characteristics AC PARAMETER(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) AC: CL=50pf, RL=500 OHMS, TR=2.5ns, TF=2.5ns SEE AC FIGS SYMBOL tpLH(8) tpHL(8) PARAMETER CONDITIONS Propagation Delay Propagation Delay NOTES VCC=5.5V @25C, VCC=4.5 & 5.5V @ -55C/125C VCC=5.5V @25C, VCC=4.5 & 5.5V @ -55C/125C PINNAME MIN MAX UNIT SUBGROUPS 2, 4 U/D to TC 4.0 10.0 ns 9 2, 4 U/D to TC 4.0 13.5 ns 10, 11 2, 4 U/D to TC 4.0 10.0 ns 9 2, 4 U/D to TC 4.0 12.5 ns 10, 11 ts(H/L)(1) Setup Time HIGH or LOW VCC=5.5V @25C, VCC=4.5 & 5.5V @ -55C/125C 5 U/D to CP 12.0 ns 9, 10, 11 th(H/L)(1) Hold Time or LOW HIGH VCC=5.5V @25C, VCC=4.5 & 5.5V @ -55C/125C 5 U/D to CP 0 ns 9, 10, 11 ts(H/L)(2) Setup Time HIGH or LOW VCC=5.5V @25C, VCC=4.5 & 5.5V @ -55C/125C 5 Pn to PL 4.5 ns 9 5 Pn to PL 6.0 ns 10, 11 VCC=5.5V @25C, VCC=4.5 & 5.5V @ -55C/125C 5 Pn to PL 2.0 ns 9, 10, 11 VCC=5.5V @25C, VCC=4.5 & 5.5V @ -55C/125C 5 CE to CP 10.0 ns 9 5 CE to CP 10.5 ns 10, 11 VCC=5.5V @25C, VCC=4.5 & 5.5V @ -55C/125C 5 CE to CP 0 ns 9, 10, 11 VCC=5.5V @25C, VCC=4.5 & 5.5V @ -55C/125C TR=1.0ns, TF=1.0ns 5 PL 6.0 ns 9 5 PL 8.5 ns 10, 11 5 CP 5.0 ns 9 5 CP 7.0 ns 10, 11 5 PL to CP 6.0 ns 9 5 PL to CP 7.5 ns 10, 11 5 Q0, Q1, 100 Q2, Q3 MHZ 9 5 Q0, Q1, 75 Q2, Q3 MHZ 10, 11 5 RC 75 MHZ 9 5 RC 50 MHZ 10, 11 th(H/L)(2) Hold Time or LOW ts(L)(3) Setup Time HIGH th(L)(3) Hold Time tw(L) Pulse Width LOW tw (L) tREC fMAX(1) fMAX(2) LOW Pulse Width Recovery Time Maximum Clock Frequency Maximum Clock Frequency VCC=5.5V @25C, VCC=4.5 & 5.5V @ -55C/125C TR=1.0ns, TF=1.0ns VCC=5.5V @25C, VCC=4.5 & 5.5V @ -55C/125C VCC=5.5V @25C, VCC=4.5 & 5.5V @ -55C/125C TR=1.0ns, TF=1.0ns VCC=5.5V @25C, VCC=4.5 & 5.5V @ -55C/125C TR=1.0ns, TF=1.0ns 6 MILITARY DATA SHEET MN54F190-X REV 1A0 (Continued) Note 1: Note 2: Note 3: Note 4: Note 5: Screen tested 100% on each device at +25C, +125C & -55C temperature, subgroups A1, 2, 3, 7 & 8. Screen tested 100% on each device at +25C temperature only, subgroup A9. Sample tested (Method 5005, Table 1) on each MFG. lot at +25C, +125C & -55C temperature, subgroups A1, 2, 3, 7 & 8. Sample tested (Method 5005, Table 1) on each MFG. lot at +25C subgroup A9, and periodically at +125C & -55C temperature, subgroups 10 & 11. Guaranteed but not tested. (DESIGN CHARACTERIZATION DATA) 7