ELP 22/6/16 Core B66285 Combination: ELP 22/6/16 with ELP 22/6/16 ELP 22/6/16 Magnetic characteristics (per set) 5,7±0,1 16,8 ±0,4 5 ±0,1 = 0,41 mm–1 = 32,5 mm = 78,3 mm2 = 77,9 mm2 = 2540 mm3 3,2±0,1 Σl/A le Ae Amin Ve 3 15,8 ±0,3 Approx. weight 13 g/set ,8 R0 21,8 ±0,4 FEK0339-R Ungapped Material AL value µe nH AL1min PV nH Ordering code (per piece) W/set N49 3100 ± 25 % 1010 1840 < 0,65 B66285-G-X149 (50 mT, 500 kHz, 100 ˚C) N87 4500 ± 25 % 1470 2760 < 1,50 B66285-G-X187 (200 mT, 100 kHz, 100 ˚C) Calculation factors (see page 423 for formulas) ELP 22/6/16 + ELP 22/6/16: Material N87 Validity range: 486 Relationship between air gap – AL value Calculation of saturation current K1 (25 ˚C) K2 (25 ˚C) K3 (25 ˚C) K4 (25 ˚C) K3 (100 ˚C) K4 (100 ˚C) 126 – 0,814 232 – 0,796 200 – 0,873 K1, K2: 0,10 mm < s < 1,50 mm K3, K4: 100 nH < AL < 700 nH Siemens Matsushita Components ELP 22/6/16 with I 22/2,5/16 Core and Accessories B66285 B65804 Combination: ELP 22/6/16 with I 22/2,5/16 Magnetic characteristics (per set) 16,8 ±0,4 5 ±0,1 I 22/2,5/16 5,7±0,1 = 0,33 mm–1 = 26,1 mm = 78,5 mm2 = 77,9 mm2 = 2050 mm3 2,5±0,1 3,2±0,1 Σl/A le Ae Amin Ve ELP 22/6/16 ,8 R0 21,8±0,4 21,8 ±0,4 FEK0340-U FEK0339-R Ungapped Material 15,8±0,3 3 15,8 ±0,3 Approx. weight 10,5 g/set µe AL value AL1min PV nH nH Ordering code (per piece) W/set N49 3700 ± 25 % 960 2290 < 0,50 B66285-G-X149 (ELP core) (50 mT, 500 kHz, 100 ˚C) B66285-P-X149 (I core) N87 5200 ± 25 % 1360 3430 < 1,25 B66285-G-X187 (ELP core) (200 mT, 100 kHz, 100 ˚C) B66285-P-X187 (I core) Calculation factors (see page 423 for formulas) ELP 22/6/16 + I 22/2,5/16: Material N87 Validity range: Relationship between air gap – AL value Calculation of saturation current K1 (25 ˚C) K2 (25 ˚C) K3 (25 ˚C) K4 (25 ˚C) K3 (100 ˚C) K4 (100 ˚C) 134 – 0,806 243 – 0,796 206 – 0,873 K1, K2: 0,10 mm < s < 1,50 mm K3, K4: 100 nH < AL < 700 nH Clamp Ordering code per piece, 2 pieces required Ordering code: B65804-P2204 Siemens Matsushita Components 487