T-1 (3 mm) Auto Insertable LED Lamps HLMP-N305 HLMP-N405 HLMP-NG0x HLMP-NJ01 HLMP-NL06 Technical Data Features Description • T-1 (3 mm) Auto Insertable Package • AlInGaP SunPower Intensity • High Light Output • Tinted Diffused and Tinted Non-diffused Lens Options • Wide Viewing Angle • Variety of Colors • Available with Straight or Formed Lead Tape and Reel Options This family of 3 mm LED Lamps is capable of withstanding automatic insertion and wave soldering processes. Designed with a thick epoxy flange and soft leadframe material, it is ideal for clinch and cut operations. Applications • General Purpose • High Volume Manufacturing Device Selection Guides High Brightness Lamps Color Part Number Red HLMP-NG05 Package Tinted Diffused µ Luminous Intensity, Min. Iv @ 20 mA 90.2 Viewing Angle, 2θ1/2 45 HLMP-NG07 µ 90.2 60 Orange HLMP-NJ01 µ 138.0 45 Amber HLMP-NL06 µ 96.2 60 Luminous Intensity, Min. Iv @ 10 mA Viewing Angle, 2θ1/2 14.7 13.8 45 45 High Efficiency Lamps Color Part Number GaP Yellow GaP Orange HLMP-N305 HLMP-N405 Package Tinted Diffused X X Note: 1. 2θ1/ 2 is the off axis angle where the luminous intensity is 1/2 the on axis intensity. 2 Package Dimensions SEATING PLANE 5.9 ± 0.5 (0.23 ± 0.02) 23.0 (0.91) 1.0 ± 0.5 (0.04 ± 0.02) 3.5 ± 0.3 (0.14 ± 0.01) CATHODE MARKS 0.65 (0.03) MAX. 0.4 ± 0.2 (0.02 ± 0.01) 4.4 ± 0.3 3.1 ± 0.2 (0.17 ± 0.01) (0.12 ± 0.01) 2.5 ± 0.3 (0.10 ± 0.01) 0.4 ± 0.2 (0.01 ± 0.01) 0.45 ± 0.10 (0.02 ± 0.007) 2.0 (0.08) REF. NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. LEADS ARE MILD STEEL. SOLDER COATED. 3. EPOXY MENISCUS OF 0.8 mm (0.03 in.) MAXIMUM MAY EXTEND TO THE LEADS. Part Numbering System HLMP - N x xx # xxx Mechanical Option 002: Tape & Reel, Straight Leads Viewing Angle Options 01: 45 Degree 05: 45 Degree 06, 07: 60 Degree Color Options 3: GaP Yellow 4: GaP Orange G: AlInGaP Red J: AlInGaP Orange L: AlInGaP Amber + 0.1 0 + 0.00 (0.2 - 0.00 ) 0.4 3.4 ± 0.2 (0.13 ± 0.01) 3 Absolute Maximum Ratings at TA = 25 ºC Parameter DC Forward Current[1] Reverse Voltage (Ir = 100 µA) Junction Temperature, Tjmax Storage Temperature Range Operating Temperature Range Lead Soldering Temperature [1.6 mm (0.063 in.) from seating plane] Orange 30 Yellow 20 5 A1InGaP Amber, Orange & Red 30[2,3] Units mA V 110 °C -40 to +85 °C -20 to +85 -40 to +85 A) DIP/DRAG Soldering: 260 °C for 5 seconds B) Wave Solder Temperature: 245 °C for 3 seconds Notes: 1. See Figure 4 for maximum current derating vs. ambient temperature. 2. Suggested minimum DC current: 10 mA 3. Maximum Peak Pulsed Forward Current: 50 mA, 30 mA average. °C 4 Electrical Characteristics at TA = 25 ºC Forward Voltage Vf (Volts) Part Number HLMP-N30x HLMP-N40x HLMP-NLO6 [1] HLMP-NG0x[1] HLMP-NJ01 Typ. 2.00 1.90 2.02 1.90 1.98 Max. If (mA) 2.6 10 2.6 10 2.4 20 2.4 20 2.4 20 Capacitance C (pF) Vf = 0, f = 1 MHz Typ. 15 4 40 40 40 Thermal Resistance RθJ-PIN (°C/W) 290 290 240 240 240 Speed of Response τs (ns) Time Constant e-t/τs Typ. 90 280 20 20 20 Note: 1. Please contact your Agilent Sales Representative about operating currents below 10 mA. Optical Characteristics at TA = 25 ºC Part Number HLMP-NG05 HLMP-NG07 HLMP-NJ01 HLMP-NL06 HLMP-N305 HLMP-N405 Typ. Dominant Luminous Intensity Typ. Peak Wavelength Min. If (mA) Wavelength (nm) (nm) 90.2 20 635 626 90.2 20 635 626 138.0 20 609 605 96.2 20 592 590 14.7 10 583 585 13.8 10 600 602 Typ. Spectral Half Width 17 17 17 17 36 37 Luminous Efficacy Width (lm/W) 150 150 370 480 500 380 Notes: 1. The luminous intensity, lv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis. 2. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the device. 3. The radiant intensity, le, in watts per steradian, may be found from the equation le = lv/ηv, where lv is the luminous intensity in candelas and ηv is the luminous efficacy in lumens/watt. 5 HIGH BRIGHTNESS LAMPS 1.0 AMBER RELATIVE INTENSITY ORANGE AlInGaP RED DH AlGaAs RED RED-ORANGE 0.5 0 550 600 650 700 WAVELENGTH – nm HIGH EFFICIENCY LAMPS 1.0 ORANGE RELATIVE INTENSITY EMERALD GREEN HIGH PERFORMANCE GREEN HIGH EFFICIENCY RED 0.5 YELLOW 0 500 550 600 650 700 WAVELENGTH – nm Figure 1. Relative Intensity vs. Peak Wavelength. HIGH BRIGHTNESS LAMPS HIGH EFFICIENCY LAMPS 90 60 50 40 IF – FORWARD CURRENT – mA IF – FORWARD CURRENT – mA 70 AlInGaP RED DH AsAlGaAs RED AMBER 30 20 10 0 1.0 1.5 2.0 2.5 3.0 VF – FORWARD VOLTAGE – V Figure 2. Forward Current vs. Forward Voltage. 80 GREEN, EMERALD GREEN 70 60 50 HIGH EFFICIENCY RED/ORANGE 40 30 YELLOW 20 10 0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 VF – FORWARD VOLTAGE – V 6 HER, ORANGE, YELLOW, AND HIGH PERFORMANCE GREEN, EMERALD GREEN 4.0 HIGH BRIGHTNESS LAMPS 1.5 AlInGaP DH As AlGaAs 1.0 0.5 0 0 10 20 30 RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 10 mA) RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) 2.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 40 0 IF – DC FORWARD CURRENT – mA 5 15 10 20 30 25 IDC – DC CURRENT PER LED – mA Figure 3. Relative Luminous Intensity vs. Forward Current. HER, ORANGE, YELLOW, AND HIGH PERFORMANCE GREEN, EMERALD GREEN 40 AlInGaP 35 30 25 RθJA = 500° C/W 20 RθJA = 650° C/W 15 RθJA = 750° C/W 10 5 0 0 10 20 30 40 50 60 70 80 90 TA – AMBIENT TEMPERATURE – °C IF – FORWARD CURRENT – mA IF – FORWARD CURRENT – mA 40 HER, ORANGE, GREEN, EMERALD GREEN 35 30 RθJA = 470° C/W 25 RθJA = 300° C/W 20 YELLOW 15 RθJA = 705° C/W 10 5 0 0 20 40 60 80 TA – AMBIENT TEMPERATURE – °C Figure 4. Maximum Forward DC Current vs. Ambient Temperature. 7 1 NORMALIZED INTENSITY 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 ANGULAR DISPLACEMENT – DEGREES Figure 5. Representative Spatial Radiation Pattern for 45° Viewing Angle. 1 NORMALIZED INTENSITY 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 ANGULAR DISPLACEMENT – DEGREES Figure 6. Representative Spatial Radiation Pattern for 60° Viewing Angle. 8 Intensity Bin Limits Color Red/Orange Yellow Bin H I J K L M N O P Q R S T U V W X Y Z G H I J K L M N O P Q R S T U V W Intensity Range (mcd) Min. Max. 13.8 27.6 22.0 44.0 35.2 70.4 56.4 112.8 90.2 180.4 138.0 276.0 200.0 400.0 290.0 580.0 500.0 1000.0 700.0 1400.0 1000.0 2000.0 1400.0 2800.0 2000.0 4000.0 2900.0 5800.0 4200.0 8400.0 6000.0 12000.0 8700.0 17400.0 12600.0 25200.0 18200.0 36400.0 14.7 29.4 23.5 47.0 37.6 75.2 60.1 120.2 96.2 192.4 147.0 294.0 212.0 424.0 300.0 600.0 450.0 900.0 700.0 1400.0 1000.0 2000.0 1600.0 3200.0 2600.0 5200.0 4000.0 8000.0 6500.0 13000.0 10000.0 20000.0 16000.0 30000.0 Maximum tolerance for each bin limit is ± 18%. 9 Color Categories Color Lambda (nm) Min. Max. 582.0 584.5 584.5 587.0 587.0 589.5 589.5 592.0 592.0 593.0 597.0 599.5 599.5 602.0 602.0 604.5 604.5 607.5 607.5 610.5 610.5 613.5 613.5 616.5 616.5 619.5 Category # 1 3 2 4 5 1 2 3 4 5 6 7 8 Yellow Orange Tolerance for each bin limit is ± 0.5 nm. Taping Options Straight Lead Option #002 #2CA #2CD Dimension “B” – – – Dimension “H” 20.5 ± 1.0 (0.81 ± 0.04) 18.0 ± 1.0 (0.71 ± 0.04) 20.5 ± 1.0 (0.81 ± 0.04) Formed Lead Option #2UK #2UL #2UM #2UN #2UP #2UQ #2UR Dimension “B” 12.0 ± 1.0 9.0 ± 1.0 10.0 ± 1.0 11.0 ± 1.0 13.0 ± 1.0 14.0 ± 1.0 15.0 ± 1.0 (0.47 ± 0.04) (0.35 ± 0.04) (0.39 ± 0.04) (0.43 ± 0.04) (0.51 ± 0.04) (0.55 ± 0.04) (0.59 ± 0.04) Dimension “H” 16.0 ± 1.0 (0.63 ± 0.04) Units: mm (inches) 10 Tape Outline Drawing 0.0 ± 1.0 (0.00 ± 0.04) 6.4 ± 1.3 (0.25 ± 0.05) 0.0 ± 1.0 (0.00 ± 0.04) 12.7 ± 1.0 (0.50 ± 0.04) CATHODE LEAD 1.5 (0.06) MAX. 5.1 ± 0.7 (0.20 ± 0.03) DIMENSION "H" (SEE TABLE) 2.5 (0.10) MAX. 18.0 ± 1.0 (0.71 ± 0.04) 14.0 ± 1.7 (0.55 ± 0.07) 11.0 MAX. (0.43) 9.1 ± 0.6 (0.36 ± 0.03) 2.5 ± 0.3 (0.10 ± 0.01) A 12.7 ± 0.3 (0.50 ± 0.01) A ∅ 4.0 ± 0.2 TYP. (0.16 ± 0.01) VIEW A–A 0.7 ± 0.2 (0.03 ± 0.01) STRAIGHT LEAD 0.0 ± 1.0 (0.00 ± 0.04) 6.4 ± 1.3 (0.25 ± 0.05) 0.0 ± 1.0 (0.00 ± 0.04) 12.7 ± 1.0 (0.50 ± 0.04) CATHODE LEAD 1.5 (0.06) MAX. DIMENSION "B" (SEE TABLE) 3.9 ± 0.7 (0.15 ± 0.03) DIMENSION "H" (SEE TABLE) 2.5 (0.10) MAX. 18.0 ± 1.0 (0.71 ± 0.04) 14.0 ± 1.7 (0.55 ± 0.07) 11.0 MAX. (0.43) 9.1 ± 0.6 (0.36 ± 0.03) 2.5 ± 0.3 (0.10 ± 0.01) A 12.7 ± 0.3 (0.50 ± 0.01) 0.7 ± 0.2 (0.03 ± 0.01) FORMED LEAD A VIEW A–A ∅ 4.0 ± 0.2 TYP. (0.16 ± 0.01) 11 Package Options Lead Option Ammo Pack (1000 pcs.) Tape & Reel (2000 pcs.) Straight Lead #2C — #002 Formed Lead #2U — – . .... .... ... OR ..... AT # ... ...... R . . E T . OP PARODE E .... . HP TE C DAT ....... . . DAPING........ .... S . TA ..... GAP ........ . BIN. OF TY . I NOANT QU FROM LEFT SIDE OF BOX, ADHESIVE TAPE IS FACING UPWARD. A + E OD AN DE IN MA ANODE LEAD LEAVES THE BOX FIRST. SIA DS LE 140 (5.51) AY L MA E – OD TH CA C 336 (13.23) 52 (2.05) DIMENSIONS IN MILLIMETERS (INCHES). AMMO PACK (for All options except #002) REELING ORIENTATION CLOCKWISE ADHESIVE TAPE MUST BE FACING TOWARDS THE OUTSIDE OF THE REEL. ANODE LEAD LEAVES THE REEL FIRST. 110 (4.33) DIA. PROTECTIVE CARDBOARD 336 (13.23) DIA. DIMENSIONS IN MILLIMETERS (INCHES). TAPE & REEL (for option #002 only) Recommended Assembly Condition • A single-sided phenolic printed circuit board (PCB) is preferred. Double-sided PCB and other materials may cause greater lead stress. Recommended through-hole diameter is 0.9 to 2.0 mm. Leadlength below the PCB should be 1.5 to 2.0 mm, and the clinching angle (angle between the lead and PCB) should be 30 ± 10 degrees. • If SMT devices and an adhesive are used on the same pcb as these lamps, the adhesive should be cured before the lamps are auto-inserted. If curing must be done after lamp insertion, the cure temperature and time should not exceed 140°C, 100 seconds. This is the temperature of the surface normal to the IR source. Solder Condition: Preheat: Temperature ramp rate of 2 to 4°C per second. Do not exceed 150°C delta temperature between preheat and solder temperatures. The maximum time at preheat should not exceed 10 seconds. Solder: 245°C ± 5°C, 3 seconds (1.6 mm below seating plane). www.semiconductor.agilent.com Data subject to change. Copyright © 2001 Agilent Technologies, Inc. November 20, 2001 Obsoletes 5988-3879EN 5988-4549EN