Surface Mount Transient Voltage Suppressors (TVS) SM8S Series 10 To 43 V 6600W Description The SM8S series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features u Junction passivation optimized design passivated anisotropic rectifier technology u TJ=175°C capability suitable for high reliability and automotive requirement DO-218AB u Available in uni-directional polarity only u Low leakage current u Low forward voltage drop u High surge capability Functional Diagram u Meets ISO7637-2 surge specification (varied by test condition) u Meets MSL level 1, u AEC-Q101 qualified u Compliant to RoHS Directive 2002/95/EC and in accordance per J-STD-020, LF maximum peak of Cathode Anode 245 °C Uni-direction to WEEE 2002/96/EC Primary Characteristics VWM 10V to 43V PPPM (10/1000µs) 6600W PPPM (10 /10000μs) 5200W PD 8W IFSM 700A TJ max. 175°C Applications Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting, especially for automotive load dump protection application. Maximum Ratings and Thermal Characteristics (TA=25℃ unless otherwise noted) Parameter Symbol with 10/1000µs waveform Value Unit 6600 Peak Pulse Power Dissipation PPPM with 10/10000µs waveform Watts 5200 Power Dissipation on Infinite Heat Sink at TA=25°C (Fig.1) Peak Pulse Current with a 10/1000µs waveform Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) Operating junction and Storage Temperature Range Typical thermal resistance, junction to case PD 8.0 Watt IPPM(1) See Next Table Amps IFSM 700 Amps TJ , TSTG - 55 to + 175 °C R θJC 0.90 °C /Watt Notes: 1. Non-repetitive current pulse derated above TA=25°C UN Semiconductor Co., Ltd. Revision October 18, 2013 www.unsemi.com.tw 1/4 @ UN Semiconductor Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. Surface Mount Transient Voltage Suppressors (TVS) SM8S Series 10 To 43 V 6600W Electrical Characteristics (TA=25℃ unless otherwise noted) Part Number Breakdown Voltage VBR (V) Stand-Off Voltage VMW (V) MIN. MAX. Test Current IT (mA) Maximum Reverse Leakage at VWM ID(µA) Maximum Reverse at VWM TJ=175°C ID(µA) Maximum Peak Pulse Current at 10/1000µs Waveform (A) Maximum Clamping Voltage at IPPM VC (V) SM8S10 10.0 11.1 13.6 5.0 15 250 351 18.8 SM8S10A 10.0 11.1 12.3 5.0 15 250 388 17.0 SM8S11 11.0 12.2 14.9 5.0 10 150 328 20.1 SM8S11A 11.0 12.2 13.5 5.0 10 150 363 18.2 SM8S12 12.0 13.3 16.3 5.0 10 150 300 22.0 SM8S12A 12.0 13.3 14.7 5.0 10 150 332 19.9 SM8S13 13.0 14.4 17.6 5.0 10 150 277 23.8 SM8S13A 13.0 14.4 15.9 5.0 10 150 307 21.5 SM8S14 14.0 15.6 19.1 5.0 10 150 256 25.8 SM8S14A 14.0 15.6 17.2 5.0 10 150 284 23.2 SM8S15 15.0 16.7 20.4 5.0 10 150 245 26.9 SM8S15A 15.0 16.7 18.5 5.0 10 150 270 24.4 SM8S16 16.0 17.8 21.8 5.0 10 150 229 28.8 SM8S16A 16.0 17.8 19.7 5.0 10 150 254 26.0 SM8S17 17.0 18.9 23.1 5.0 10 150 216 30.5 SM8S17A 17.0 18.9 20.9 5.0 10 150 239 27.6 SM8S18 18.0 20.0 24.4 5.0 10 150 205 32.2 SM8S18A 18.0 20.0 22.1 5.0 10 150 226 29.2 SM8S20 20.0 22.2 27.1 5.0 10 150 184 35.8 SM8S20A 20.0 22.2 24.5 5.0 10 150 204 32.4 SM8S22 22.0 24.4 29.8 5.0 10 150 168 39.4 SM8S22A 22.0 24.4 26.9 5.0 10 150 186 35.5 SM8S24 24.0 26.7 32.6 5.0 10 150 153 43.0 SM8S24A 24.0 26.7 29.5 5.0 10 150 170 38.9 SM8S26 26.0 28.9 35.3 5.0 10 150 142 46.6 SM8S26A 26.0 28.9 31.9 5.0 10 150 157 42.1 SM8S28 28.0 31.1 38.0 5.0 10 150 132 50.1 SM8S28A 28.0 31.1 34.4 5.0 10 150 145 45.4 SM8S30 30.0 33.3 40.7 5.0 10 150 123 53.5 SM8S30A 30.0 33.3 36.8 5.0 10 150 136 48.4 SM8S33 33.0 36.7 44.9 5.0 10 150 112 59.0 SM8S33A 33.0 36.7 40.6 5.0 10 150 124 53.3 SM8S36 36.0 40.0 48.9 5.0 10 150 103 64.3 SM8S36A 36.0 40.0 44.2 5.0 10 150 114 58.1 SM8S40 40.0 44.4 54.3 5.0 10 150 92.4 71.4 SM8S40A 40.0 44.4 49.1 5.0 10 150 102 64.5 SM8S43 43.0 47.8 58.4 5.0 10 150 86 76.7 SM8S43A 43.0 47.8 52.8 5.0 10 150 95.1 69.4 Note: For all types maximum VF = 1.8V at IF = 100A measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum. UN Semiconductor Co., Ltd. Revision October 18, 2013 www.unsemi.com.tw 2/4 @ UN Semiconductor Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. Surface Mount Transient Voltage Suppressors (TVS) SM8S Series 10 To 43 V 6600W Ratings and Characteristic Curves (TA=25°C unless otherwise noted) Figure 1 – Power Derating Curve Figure 2 - Load Dump Power Characteristics (10 ms Exponential Waveform) Figure 3 - Pulse Waveform Figure 4 – Reverse Power Capability Figure 5 - Typical Transient Thermal Impedance Figure 6 - Typical Junction Capacitance UN Semiconductor Co., Ltd. Revision October 18, 2013 www.unsemi.com.tw 3/4 @ UN Semiconductor Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. Surface Mount Transient Voltage Suppressors (TVS) SM8S Series 10 To 43 V 6600W Mechanical Data Case DO-218AB Molding compound meets UL 94 V-0 flammability rating Base P/N HE3 - RoHS compliant, AEC-Q101 qualified Polarity Heat sink is anode Terminal Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 HE3 suffix meets JESD 201 class 2 whisker test Part Numbering SM8S×××A 5% VBR VOLTAGE TOLERANCE VR VOLTAGE SERIES Ordering Information (Example) Preferred P/N Unit Weight (g) Preferred Package Code Base Quantity Delivery Mode 2.605 2D 750 13" diameter plastic tape and reel, anode towards the sprocket hole (1) SM8S10AHE3/2D Note: (1) AEC-Q101 qualified Package Outline Dimensions Unit: inches (millimeters) UN Semiconductor Co., Ltd. Revision October 18, 2013 www.unsemi.com.tw 4/4 @ UN Semiconductor Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.