UPS115U ULTRA LOW VF SCHOTTKY BARRIER RECTIFIER 1.0 AMP, 15 VOLT C OL OR AD O DIVISIO N DESCRIPTION In addition to its size advantages, Powermite package features include a full metallic bottom that eliminates the possibility of solder flux entrapment during assembly, and a unique locking tab acts as an integral heat sink. Its innovative design makes this device ideal for use with automatic insertion equipment Low Profile – Maximum height of 1.1 mm 2 Footprint Area of 10 mm Low VF Provides Higher Efficiency Low Thermal Resistance with Direct Thermal Path of Die on Exposed Cathode Heat Sink Supplied in 8mm Tape and Reel – 3,000 units/7” W W W. Microsemi .COM In Microsemi’s new Powermite SMT Package, these high efficiency Schottky rectifiers offer power handling capabilities previously found only in much larger packages. They are ideal for SMD applications that operate at high frequencies. KEY FEATURES Reel; 12,000 units/13” Reel SURFACE MOUNT POWERMITE Surface Mount Power Package IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com APPLICATIONS/BENEFITS APPLICATIONS/BENEFITS High power Surface Mount Package Guard Ring Protection Ultra Low forward voltage Integral Heat Sink/Locking Tabs Compatible with Automatic Insertion Equipment Full Metallic Bottom Eliminates Flux Entrapment High Surge Capacity Ideal for OR’ing Diode MECHANICAL CHARACTERISTICS •= •= •= •= Case: Molded Epoxy Meets UL94VO at 1/8 inch Device Marking S15U Lead and Mounting Surface Temperature for Soldering = 260°C Maximum for 10 Seconds UPS115U Copyright 2000 MSCXXXX 2002-5-16 Rev. 2 Microsemi Colorado Division 800 Hoyt Street, Broomfield CO. 303-469-2161, Fax: 303-466-3775 Page 1 UPS115U ULTRA LOW VF SCHOTTKY BARRIER RECTIFIER 1.0 AMP, 15 VOLT C OL OR AD O DIVISIO N (Conditions) SYMBOL VALUE UNIT VRRM 15 VRWM 15 V V V IO 1.0 A IFSM 50 A Storage Temperature Range TSTG, TC -55 to 150 °C Operating Temperature Range TJ dv/dt -55 to 100 °C 1000 V/us mA Working Peak Reverse Voltage VR Average Rectified Forward Current Repetitive Peak Surge Current (@ Rated VR and TL = 65ºC) (Non-Repetitive peak surge current @ IO = 1.0 Amps ) Voltage Rate of Change (@ Rated VR and TJ = 25ºC) IRM Max Peak Reverse Current (VRRM = 15V, TJ = 25ºC) 10 W W W. Microsemi .COM MAXIMUM RATINGS RATING Peak Repetitive Reverse Voltage THERMAL CHARACTERISTICS RATING SYMBOL VALUE UNIT ROJL 15 °C/W SYMBOL VALUE UNIT Thermal Resistance, Junction – to – Lead (1) ELECTRICAL CHARACTERISTICS RATING (Conditions) Maximum Instantaneous Forward Voltage (IF = 1.0 Amps, TJ = +75ºC) VF .22 Volts Maximum Instantaneous Reverse Current (VR = 15 Vdc, TJ = +25ºC) IRM 10 mA Typical Junction Capacitance (TJ = 25ºC, VR = 5V) CJ 150 pF ELECTRICALS Copyright 2000 MSCXXXX 2002-5-16 Rev. 2 Microsemi Colorado Division 800 Hoyt Street, Broomfield CO. 303-469-2161, Fax: 303-466-3775 Page 2 UPS115U C OL OR AD O DIVISIO N ULTRA LOW VF SCHOTTKY BARRIER RECTIFIER 1.0 AMP, 15 VOLT W W W. Microsemi .COM MECHANICAL SPECIFICATIONS MECHANICALS Copyright 2000 MSCXXXX 2002-5-16 Rev. 2 Microsemi Colorado Division 800 Hoyt Street, Broomfield CO. 303-469-2161, Fax: 303-466-3775 Page 3 UPS115U C OL OR AD O DIVISIO N ULTRA LOW VF SCHOTTKY BARRIER RECTIFIER 1.0 AMP, 15 VOLT W W W. Microsemi .COM NOTES Copyright 2000 MSCXXXX 2002-5-16 Rev. 2 Microsemi Colorado Division 800 Hoyt Street, Broomfield CO. 303-469-2161, Fax: 303-466-3775 Page 4