T-1 3/4 (5mm) FULL COLOR RGB LED LAMPS ® Kingbright LF59EMBGMBC HIGH EFFICIENCY RED / BLUE / GREEN LF59EMBGMBW HIGH EFFICIENCY RED / BLUE / GREEN Package Features Dimensions lTWO BLUE, ONE GREEN AND ONE RED CHIPS IN ONE PACKAGE. lCAN PRODUCE ANY COLOR IN VISIBLE SPECTRUM, INCLUDING WHITE LIGHT. lWIDE VIEWING ANGLE FOR DIFFSUED LENS AND HIGH INTENSITY FOR WATER CLEAR LENS. Description The Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. The Blue source color devices are made with GaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handing the LEDs. All devices, equipment and machinery must be electrically grounded. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subjected to change without notice. Selection Guide Part No. Dice Lens Type HIGH EFFICIENCY RED (GaAsP/GaP) LF59EMBGMBC BLUE(GaN) WATER CLEAR GREEN (GaP) BLUE(GaN) LF59EMBGMBW Iv (mcd) @ 20 mA Min. Max. 90 200 12.5 40 50 150 12.5 40 HIGH EFFICIENCY RED (GaAsP/GaP) 20 90 BLUE(GaN) 3.2 12.5 10 70 3.2 12.5 GREEN (GaP) WHITE DIFFUSED BLUE(GaN) Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2-LF59-1 Viewing Angle 2θ1/2 15° 30° Electrical / Optical Characteristics at TA=25°C Symbol Parameter Units Test Conditions λpeak Peak Wavelength High Efficiency Red Green Blue 625 565 430 nm IF=20mA Spectral Line Halfwidth High Efficiency Red Green Blue 45 30 65 nm IF=20mA C Capacitance High Efficiency Red Green Blue 12 45 100 pF VF=0V;f=1MHz vF Forward Voltage High Efficiency Red Green Blue 2.0 2.2 4.5 V IF=20mA IR Reverse Current All 10 uA VR = 5V ∆λ1/2 Device Typ. Max. 2.5 2.5 5.5 Absolute Maximum Ratings at TA=25°C Parameter Power dissipation High Efficiency Red Green Blue Units 105 105 105 mW DC Forward Current 30 25 30 mA Peak Forward Current [1] 150 150 200 mA 5 5 5 V Reverse Voltage Operating/Storage Temperature -40 °C To +85 °C Lead Soldering Temperature [2] 260 °C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 4mm below package base. \ 2-LF59-2 LF59EMBGMBC, LF59EMBGMBW High Efficiency Red / Green Blue 2-LF59-3