CUB AN222 R Austria Mikro Systeme International 0.6 µm CMOS AN222 is an AND / NOR circuit providing the logical function Q = NOT (A.B+C.D+E.F). Truth Table Capacitance A B C D E F Q L X L X L X H L X L X X L H L X X L X L H A L X X L L X H B X X X L L L L L X X X L L X L X L X H H H X L X L X L H E X X X X H H L F X X H H X X L H H X X X X L Ci (pF) A B C D E F AN222 C Q D Area Power 0.95 mils 2 3.72 µW / MHz Delay [ns] = tpd.. = f(SL, L) Output Slope [ns] = op_sl.. = f(L) AC Characteristics : 0.054 0.058 0.053 0.059 0.066 0.071 Tj = 25°C with SL = Input Slope [ns] ; L = Output Load [pF] with L = Output Load [pF] VDD = 3.3V Typical Process AC Characteristics Characteristics Symbol Delay A to Q SL = 0.1 SL = 2.0 L = 0.1 L = 0.7 L = 1.0 L = 0.1 L = 0.7 L = 1.0 tpdar tpdaf 0.72 0.61 2.08 1.55 2.80 2.00 0.83 0.66 2.18 1.56 2.86 2.01 Delay B to Q tpdbr tpdbf 0.68 0.59 2.03 1.53 2.77 1.98 0.78 0.79 2.13 1.66 2.86 2.12 Delay C to Q tpdcr tpdcf 0.66 0.49 2.02 1.43 2.79 1.86 0.81 0.57 2.11 1.44 2.82 1.88 Delay D to Q tpddr tpddf 0.64 0.47 1.99 1.41 2.78 1.84 0.77 0.69 2.09 1.53 2.79 1.98 Delay E to Q tpder tpdef 0.46 0.33 1.85 1.26 2.60 1.66 0.74 0.39 2.00 1.27 2.70 1.71 Delay F to Q tpdfr tpdff 0.43 0.31 1.83 1.25 2.57 1.65 0.71 0.51 1.97 1.36 2.65 1.79 Sept. 1996 - 11 - Rev. N/C CUB AN222 R Austria Mikro Systeme International Characteristics Symbol Output Slope A to Q 0.6 µm CMOS SL = 0.1 SL = 2.0 L = 0.1 L = 0.7 L = 1.0 L = 0.1 L = 0.7 L = 1.0 op_slar op_slaf 1.61 1.38 5.78 4.02 7.97 5.30 1.73 1.50 5.82 4.02 7.93 5.38 Output Slope B to Q op_slbr op_slbf 1.55 1.38 5.90 4.03 7.97 5.27 1.67 1.65 5.77 4.08 8.06 5.37 Output Slope C to Q op_slcr op_slcf 1.62 1.11 5.67 3.75 7.93 5.06 1.77 1.30 5.85 3.80 7.90 5.08 Output Slope D to Q op_sldr op_sldf 1.56 1.12 5.83 3.76 7.98 5.07 1.72 1.43 5.76 3.82 7.91 5.12 Output Slope E to Q op_sler op_slef 1.53 0.86 5.78 3.52 8.01 4.87 1.77 1.11 5.77 3.58 7.86 4.91 Output Slope F to Q op_slfr op_slff 1.51 0.83 5.83 3.53 7.97 4.87 1.66 1.20 5.68 3.68 7.95 4.96 Sept. 1996 - 12 - Rev. N/C