ICs for Video Camera AN608P Wide bandwidth video amplifier IC (in-phase amplifier) ■ Overview Unit: mm 7.0±0.3 5.0±0.3 7.0±0.3 The AN608P is an amplifier IC with a 20 dB gain, a non-inverted output and a wide bandwidth (10MHz). It is best suited to video amplifier and sense amplifier. 45° ■ Features 12.3±0.25 • Wide bandwidth (10 MHz) • 20 dB non-inverting amplifier • 4-pin SIP plastic package 1.27 • Video amplifier, sense amplifier 0.416±0.1 9° 9° 1 2 3 4 +0.25 0.225 –0.1 1.2 2.0±0.3 ■ Applications 9° SSIP004-P-0000A ■ Equivalent Circuit 2 Q7 Q5 Q2 3 1 Q3Q4 Q1 Q6 4 ■ Pin Descriptions Pin No. Description 1 Output 2 Supply voltage 3 Input 4 GND 1 AN608P ICs for Video Camera ■ Absolute Maximum Ratings at Ta = 25°C Parameter Symbol Rating Unit Supply voltage V2-4 14.4 V Circuit voltage V3-4 V2-4 to −1 V Total consumption current I2 11 mA Circuit current I3 +1 to − 0.5 mA I1 0 to −5 Total power dissipation PTOT 160 mW Operating ambient temperature Topr −20 to +70 °C Storage temperature Tstg −40 to +125 °C Note) Do not apply current and voltage to the pins not described. The mark '+' means the current flowing into the IC and the mark '−' means the current flowing out of the IC. ■ Electrical Characteristics at Ta = 25°C Parameter Symbol Conditions Min Max Unit I2 VCC = 12 V 5.0 9.0 mA Video signal output pin voltage V1-4 VCC = 12 V 5.0 8.0 V Video signal input pin voltage V3-4 VCC = 12 V 1.9 3.5 V Maximum output voltage VOM f = 10 kHz, RL = 1.5 kΩ Output voltage 1 VO(1) f = 10 kHz, VI = 0.1 V[p-p] 0.8 1.1 V[p-p] Output voltage 2 VO(2) VI = 0.2 V[p-p] 1.5 2.2 V[p-p] Circuit current 2 V[p-p] Frequency characteristics ∆VO(f1) VI = 0.1 V[p-p], f = 1 MHz to 5 MHz −1 +1 dB Frequency characteristics ∆VO(f2) VI = 0.1 V[p-p], f = 1 MHz to 10 MHz −1 +2 dB 1 % Total harmonics distortion ratio VO = 1 V[p-p], f = 10 kHz THD ■ Basic Circuit Input 2 Typ 3 2 4 1 0.0 1 µF +12 V Output