1N4001 THRU 1N4007 PLASTIC SILICON RECTIFIER VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere FEATURES l Low forward voltage drop l High current capability l High reliability l High surge current capability l Exceeds environmental standards of MIL-S-19500/228 DO-41 MECHANICAL DATA Case: Molded plastic , DO-41 Epoxy: UL 94V-O rate flame retardant Lead: Axial leads, solderable per MIL-STD-202, method 208 guaranteed Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.012 ounce, 0.3 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ¢J ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 UNITS Maximum Recurrent Peak Reverse Voltage 50 100 200 400 600 800 1000 V Maximum RMS Voltage 35 75 140 280 420 560 700 V Maximum DC Blocking Voltage 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified 1.0 A Current .375"(9.5mm) Lead Length at TA=75 ¢J Peak Forward Surge Current 8.3ms single 30 A half sine-wave superimposed on rated load (JEDEC method) Maximum Forward Voltage at 1.0A DC and 1.1 V 25 ¢J Maximum Full Load Reverse Current Full 30 £g A Cycle Average at 75 ¢J Ambient 5.0 £g A Maximum Reverse Current at TA=25 ¢J 500 £g A At Rated DC Blocking Voltage TA=100 ¢J Typical Junction capacitance (Note 1) 15 PF Typical Thermal Resistance (Note 2) R £KJA 50 ¢J /W 25 ¢J /W Typical Thermal resistance (NOTE 2) R £K JL Operating and Storage Temperature Range -55 to +150 ¢J TJ,TSTG NOTES: 1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC. 2. Thermal Resistance Junction to Ambient and from junction to lead at 0.375"(9.5mm) lead length P.C.B mounted. RATING AND CHARACTERISTIC CURVES AVERAGE FORWARD RECTIFIED 1N4001 THRU 1N4007 1.6 MAXIMUM AVERAGE CURRENT RATING SINGLE CURRENT AMPERES 1.4 HALF-WAVE, 60Hz RESISTIVE OR INDUCTIVE 1.2 LEAD LENGTHS 1.0 .8 .6 .4 .2 0 0 20 40 60 80 120 140 160 180 AMBIENT TEMPERATURE, ¢J 10 4 2 1.0 .4 .2 Tj=25¢J .1 Pulse Width = 300£gs 2% Duty Cycle .04 .02 .01 .6 .8 1.0 1.2 1.4 ¡@¡@ ¡@¡@ ¡@ ¡@ 1.5 30 24 pk (HALF-SINE WAVE) FORWARD SURGE CURRENT, AMPERES 20 AMPERES INSTANTANEOUS FORWARD CURRENT, Fig. 1-TYPICAL FORWARD CURRENT DERATING CURVE 18 12 6 1 4 6 8 10 20 40 60 80 100 NUMBER OF CYCLES AT 60Hz INSTANTANEOUS FORWARD VOLTAGE, VOLTS Fig. 2-TYPICAL FORWARD CHARACTERISTICS 2 Fig. 3-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT Tj = 150¢J Tj = 150¢J 10 Tj = 100¢J 1 0.1 Tj = 25¢J 0.01 0 20 60 80 100 120 MICROAMPERES 100 INSTANTANEOUS REVERSE CURRENT INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 1,000 10 4 Tj=100¢J 1.0 .4 .1 Tj=25¢J .04 .01 0 20 40 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) PERCENTAGE OF PEAK REVERSE VOLTAGE, % Fig. 4-TYPICAL REVERSE CHARACTERISTICS Fig. 5-TYPICAL REVERSE CHARACTERISTICS