PHOTOTRANSISTOR OPTICAL INTERRUPTER SWITCH QVE00832 PACKAGE DIMENSIONS 0.551 (14.00) + D E + CL 0.236 (6.00) 0.020 (.50) 0.197 (5.00) CL CL (OPTICAL) 0.100 (2.50) 0.394 (10.00) 0.295 (7.50) (2X) • No contact switching 0.400 (10.16) (2X) (NOM) 1 4 2 3 • 5mm wide slot 0.260 (6.60) 0.092 (2.35) • 0.5 mm aperture width • Opaque black plastic housing KNOB Ø0.026 (.66) CL PINS 0.020 (.51) (4X) SQ. (TYP) SCHEMATIC FEATURES 0.197 (5.00) MIN (4X) 0.027 (.70) (2X) • Locating knobs on housing base 3 2 for accurate mounting CL 0.100 (2.54) (2X) (TYP) 1 PIN 1 ANODE PIN 2 CATHODE 0.205 (5.20) • Transistor Output 4 NOTES PIN 3 COLLECTOR PIN 4 EMITTER 1. Derate power dissipation linearly 1.67 mW/°C above 25°C. 2. RMA flux is recommended. 3. Methanol or isopropyl alcohols are recommended as cleaning agents. 4. Soldering iron tip 1/16” (1.6mm) from housing. NOTES: 1. Dimensions for all drawings are in inches (millimeters). 2. Tolerance of ± .010 (.25) on all non-nominal dimensions unless otherwise specified. ABSOLUTE MAXIMUM RATINGS Parameter Operating Temperature (TA = 25°C unless otherwise specified) Symbol Rating Units TOPR -55 to +100 °C Storage Temperature TSTG -55 to +100 °C Soldering Temperature (Iron)(2,3,4) TSOL-I 240 for 5 sec °C Soldering Temperature (Flow)(2,3) TSOL-F 260 for 10 sec °C EMITTER Continuous Forward Current IF 60 mA Reverse Voltage VR 6 V Power Dissipation(1) PD 150 mW SENSOR Collector-Emitter Voltage VCEO 30 V Emitter-Collector Voltage VECO 4.5 V Collector Current IC 20 mA Power Dissipation(1) PD 150 mW 2001 Fairchild Semiconductor Corporation DS300257 1/3/02 1 OF 4 www.fairchildsemi.com PHOTOTRANSISTOR OPTICAL INTERRUPTER SWITCH QVE00832 ELECTRICAL / OPTICAL CHARACTERISTICS PARAMETER (TA = 25°C ) TEST CONDITIONS SYMBOL MIN TYP MAX UNITS Forward Voltage IF = 20 mA VF — 1.2 1.5 V Reverse Current VR = 4 V IR — — 10 µA IF = 20 mA DPE — 940 — nm VCE = 10 V, IF = 0 mA ID — — 200 nA Collector Current IF = 20 mA, VCE = 10 V IC(ON) 0.5 — 14 mA Collector Emitter IF = 20 mA, IC = 0.1 mA VCE (SAT) — — 0.4 V Rise Time VCC = 5 V, RL = 100 1 tr — 4 — µs Fall Time IC = 5 mA tf — 4 — µs EMITTER Peak Emission Wavelength SENSOR Dark Current COUPLED Saturation Voltage TYPICAL PERFORMANCE CURVES 110 110 TA = 25˚C IF = 20 mA VCE = 10 V 100 90 100 0 80 ICE Normalized(%) 80 ICE Normalized(%) TA = 25˚C IF = 20 mA VCE = 10 V 90 70 0 60 50 40 70 60 50 40 30 30 20 20 10 10 0 0 0 0.1 0 0.2 0.3 0.4 0.5 0.25 0.5 0.75 Distance (mm) 1.25 1.5 1.75 2 Distance (mm) Fig. 1 Collector Current vs. Shield distance Fig. 2 Collector Current vs. Shield distance 5 1.9 TA = 25˚C 4.5 IF = 20 mA, IC = 0.1 mA IF = 40 mA 1.4 IF = 10 mA, IC = 0.05 mA 4 3.5 1.2 IF = 30 mA VCE Normalized ICE (mA) 1 0.6 3 2.5 IF = 20 mA 2 1 0.8 IF = 30 mA, IC = 0.15 mA 0.6 1.5 IF = 10 mA 1 0.4 Normalized to IF = 20 mA, IC = 0.1 mA, TA = 25˚C 0.5 0.2 0 0 1 2 3 4 5 6 7 8 9 10 11 12 0 -50 VCE (V) Fig. 3 Collector-Emitter Voltage vs. Collector Current www.fairchildsemi.com -25 0 25 Temp(C) 50 75 100 Fig. 4 Collector-Emitter Voltage vs. Temperature 2 OF 4 1/3/02 DS300257 PHOTOTRANSISTOR OPTICAL INTERRUPTER SWITCH QVE00832 3 5 4.5 Normalized to IF = 20 mA, VCE = 5 V, TA = 25˚C 4 IF = 100 mA 2.5 Ice Normalized ICE Normalized IF = 60 mA 3.5 3 2.5 2 IF = 30 mA 1.5 2 1.5 TA = 25˚C VCE = 10 V Normalized to IF = 20 mA 1 IF = 20 mA 0.5 1 IF = 10 mA 0.5 IF = 5 mA 0 0 0 -55 -40 -20 0 20 Temp(C) 40 60 80 5 10 1.1 T(off) Normalized 0.9 T(on) T(off) Normalized TA = 25˚C PW = 300 µs PRR = 100 µs VCC = 5 V Normalized to RL = 2k 1 0.85 0.8 0.75 0.7 0.65 0.6 0.55 0.5 1 2 3 4 5 6 25 30 35 40 45 50 55 Fig. 6 Collector Current vs. Forward Current 1.05 1 20 IF (mA) Fig. 5 Collector Current vs. Temperature 0.95 15 100 7 8 9 10 4.5 4.25 4 3.75 3.5 3.25 3 2.75 2.5 2.25 2 1.75 1.5 1.25 1 0.75 0.5 0.25 0 1 RL(k1) TA = 25˚C PW = 300 µs PRR = 100 µs VCC = 5 V Normalized to RL = 2k 1 T(off) 2 3 4 5 6 7 8 9 10 RL(k1) Fig. 8 Fall Time vs. Load Resistance Fig. 7 Rise Time vs. Load Resistance 55 50 45 TA = 30˚C 40 IF (mA) 35 TA = 25˚C 30 TA = 70˚C 25 20 15 10 5 0 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 VF(V) Fig. 9 Forward Voltage vs. Forward Current DS300257 1/3/02 3 OF 4 www.fairchildsemi.com PHOTOTRANSISTOR OPTICAL INTERRUPTER SWITCH QVE00832 DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com 4 OF 4 1/3/02 DS300257