SS0520 - SS0540 SURFACE MOUNT SCHOTTKY BARRIER DIODES VOLTAGE CURRENT 20 to 40 Volts 0.5 Amperes FEATURES • Low turn-on voltage • Fast switching • PN Junction Guard Ring for Transient and ESD Protection. MECHANICAL DATA • Case: SOD-123, Molded Plastic • Terminals: Solderable per MIL-STD-202, Method 208 • Polarity: See Diagram Below SOD-123 • Approx. Weight: 0.008 grams • Mounting Position: Any MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Parameter Symbol S S 0520 S S 0530 S S 0540 Units Maximum Recurrent Peak Reverse Voltage VRRM 20 30 40 V Maximum RMS Voltage VRMS 14 21 28 V Maximum DC Blocking Voltage VDC 20 30 40 V IAV 0.5 0.5 0.5 A IFSM 5.5 5.5 5.5 A VF 0.3 0.385 0.375 0.430 0.51 V IR 0.075 @ VR=10 0.25 @ VR=20 0.02 @ VR=15 0.13 @ VR=30 0.01 @ VR=20 0.02 @ VR=40 mA Maximum Average Forward Current at Ta=25oC Peak Forward Surge Current, 8.3ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage at 0.1A 0.5A Maximum DC Reverse Current at Rated DC Blocking Voltage Maximum Thermal Resistance Operating Junction Temperature Range Storage Temperature Range Part Number: SS0520 - SS0540 RθJL RθJA 150 206 TJ -55 TO +125 O TSTG -55 TO +125 O O C/W C C PAGE 1 REVERSE CURRENT, mAmps 10,000 TJ=100 C O 1,000 TJ=75 C O 100 0 10 5 15 20 25 INSTANTANEOUS FORWARD CURRENT AMPERS RATING and CHARACTERISTIC CURVES 1 TJ=100 C O O 0.01 TYPICAL REVERSE CURRENT 0.2 0.3 0.4 0.5 TYPICAL FORWARD VOLTAGE 200 10 CAPACITANCE, PF 10 REVERSE CURRENT, mAmps 0.1 INSTANTANEOUS FORWARD VOLTAGE, VOLTS REVERSE VOLTAGE, Volts TJ=25 C O 1 150 100 50 0.1 0.01 0 0 5 10 15 20 25 0 5 10 15 20 25 REVERSE VOLTAGE, Volts REVERSE VOLTAGE, Volts TYPICAL JUNCTION CAPACITANCE TYPICAL REVERSE CURRENT AVERAGE FORWARD CURRENT, AMPS TJ=25 C 0.1 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 20 30 40 50 60 70 80 90 100 110 120 130 AMBIENT LEAD TEMPERATURE, C O CURRENT DERATING Part Number: SS0520 - SS0540 PAGE 2 OUTLINE DRAWING SOD-123 .053 (1.35) .037 (.95) .071 (1.80) .055 (1.40) .110 (2.80) .098 (2.50) .008 (.20) MAX. .028 (0.70) .019 (0.50) .154 (3.90) .141 (3.60) .005 (.12) MAX. .016 (.40) MIN. Dimensions in inches and (millimeters) © Copyright PanjIt International Inc. 2001 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. PanJit Internatioal Inc. TEL:886-7-6213121 Fax:886-7-6213129 Part Number: SS0520 - SS0540 Internet: http://www.panjit.com.tw email: [email protected] PAGE 3