SB073P150-W-Ag/Al Schottky Barrier Diode Wafer 73 Mils, 150 Volt, 5 Amp Data Sheet 1. Solderable Surface Ti/Ni/Ag - Suffix "Ag" 2. Wire Bond Surface Aluminium - Suffix "Al" Features Oxide Passivated Junction Low Forward Voltage 150 º C Junction Operating Low Reverse Leakage Supplied as Wafers Platinum Barrier Electrical Characteristics @ 25 C Anode Solderable Surface Ti/Ni/Ag Cathode VRRM Symbol SB073P150-W-Ag/Al (See ordering code below) Symbol Unit Volt 150 Maximum Forward Voltage (1)(2) VF Volt 0.83 Typical Average Forward Rectified Current (2) IF(AV) Amp 5 Maximum Repetitive Reverse Voltage (2) Cathode Reverse Leakage Current (2) IR µA 10 Reverse Leakage Current @ 125 C (2) IR mA 5 Junction Operating Temperature Range (2) TJ C -65 to +150 Storage Temperature Range (2) TSG C -65 to +150 (1) Pulse Width tp = < 300µS, Duty Cycle <2% (2) The characteristics above assume the die are assembled in indusry standard packages using appropriate attach methods. Ordering Code SB040P150-W-Ag Schottky Barrier 40 Mils Pt Barrier 150 Volt Wafer Ti/Ni/Ag Mechanical Dimensions Die Wafer Wafer Diameter - 100 mm (4") Wafer Thickness 420 +/- 20 Top (Anode) - Ti/Ni/Ag (Suffix "Ag") or Aluminium (Suffix "Al") Bottom (cathode) Ti/Ni/Ag 73 (1.85) 64.5 (1.64) 73 (1.85) 64.5 (1.64) 420 +/- 20 µm Third Angle Protection The information in this datasheet does not form part of any contract, quotation guarantee,warranty or representation, it has been produced in good faith and is believed to be accurate and may be changed without notice at anytime. Liability will not be accepted by Transys Electronics LTD for any consequences whatsoever in its use. This publication does not convey nor imply any license under patent or other intellectual/industrial property rights. The products within this specification are not designed for use in any life support apparatus whatsoever where malfunction can be reasonably expected to cause personal injury or death. Customers using these products in the aforementioned applications do so at their own risk and agree to fully indemnify Transys Electronics LTD for any damage/ legal fees either direct, incidental or consequential from this improper use or sale. Dimensions in mils (mm) Transys Electronics LTD Birmingham UK. Email: [email protected] Website: www.transyselectronics.com Tel: + 44 (0) 121 776 6321 Fax: + 44 (0) 121 776 6997 SCD0901-1 Page 1 of 1