High Speed Receptacle Photodiodes Technical Data PDT0313-FC-A Features Description • Industry Standard FC Connector • Low Dark Current • High Reliability Planar InGaAs PIN Photodiode • High Responsivity The PDT0313-FC-A uses HewlettPackard’s highly reliable top entry photodiode mounted in a high speed packaging environment to exploit the wide bandwidth performance of the PIN. The optical interface is by means of an FC connector housing. The electrical interface is through an SMA compatible connector. The receptacle includes a standard two hole panel mounting flange. Applications • Instrumentation • O-E Converters • Single and Multimode Fiber Communications Systems • Data Communications Receivers 500 5963-3561E (11/94) PDT0313-FC-A Specifications Absolute Maximum Ratings Absolute maximum limits mean that no catastrophic damage will occur if the product is subjected to these ratings for short periods, provided each limiting parameter is in isolation and all other parameters have values within the performance specification. It should not be assumed that limiting values of more than one parameter can be applied to the product at the same time. Parameter Reverse Voltage Forward Voltage Forward Current Optical Power Operating Temperature Minimum -20 Maximum 15 0.5 5 5 65 Units V V mA mW °C The following are measured with a bias of +5 volt to the center conductor of the electrical connnector with 9/125 µm single mode fiber, and at 25°C, unless specified. Optical Specification Parameter Minimum Maximum Units Responsivity @ 1300 nm 0.75 A/W Responsivity @ 1550 nm 0.8 A/W Operating Wavelength 1100 1650 nm Optical Return Loss 22 dB Electrical Specification Parameter Bandwidth (-3 dB, 50 Ω) referred to 130 MHz Ripple Dark Current Minimum 6 - Maximum 10 ± 1.5 2 Units GHz dB nA Patch Cord The product is supplied with a single mode patch cord, with one end coated to give >22 dB optical return loss. 501 PDT0313 Schematics + Ve Product Code PDT0313 Product Marking PDT0313 Part Number 105082.002 E D ∅R C B ∅K A ∅Q ∅P ∅N J G NOTE: MICROWAVE SIGNAL OUTPUT IS FROM AN "SMA" COMPATIBLE CONNECTOR. (DIMENSIONS ∅P x D) M ∅L F F DIM. A B C D E F G H MIN. MAX. 8.28 7.72 6.50 6.20 6.20 2.85 6.20 5.80 23.50 NOM. 2.22 1.78 19.35 18.65 9.48 8.92 ALL DIMENSIONS IN MILLIMETERS 502 DIM. J ∅K ∅L M ∅N ∅P ∅Q ∅R MIN. MAX. 13.65 13.25 4.26 3.74 2.42 1.98 1.72 1.28 M8 x 0.75 1/4-36 UNS-2A 7.10 6.85 9.10 8.80 Ordering Information Please order part number PDT0313-FC-A Handling Precautions 1. The PDT0313-FC-A can be damaged by current surges of overvoltage. Power supply transient precautions should be taken. 2. Normal handling precautions for electrostatic sensitive devices should be taken. 503