C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CONTENTS EMIFILr, EMIGUARDr, "EMIFIL" and "EMIGUARD" in this catalog are the trademarks of Murata Manufacturing Co., Ltd. Selection Guide of EMI Filters 2 Products Guide / Effective Frequency Range 3 Outlines of EMI Suppression Filter (EMIFILr) for DC Line 6 1 2 3 Chip Ferrite Beads Part Numbering / Impedance Map / BLM Series Line Up BLM03A/15A/18A/21A/31A/41A 18 BLM15B/18B/21B/31B BLM18R/21R BLM18P/21P/31P/41P 27 41 45 Chip EMIFILr Part Numbering 70 Capacitor Array NFA31C RC Combined Type NFR21G RC Combined Array Type NFA31G 74 75 79 Chip EMIGUARDr (EMIFILr with Varistor Function) Part Numbering Film Type Array DLP31D Monolithic Type DLM2HG 2 81 84 86 89 93 3 96 4 94 Chip Common Mode Choke Coils Part Numbering Film Type DLP11S/DLP31S 5 LC Combined Monolithic Type NFL18ST/18SP/21SP LC Combined Winding Type NFW31S LC Combined Type for Large Current NFE31P/61P/61H For Large Current NFM18P/21P/3DP/41P 1 53 60 66 Capacitor Type NFM18C/21C/3DC/41C VFM41R 4 12 For GHz Range Noise Suppression BLM18H/18E Array Type BLA2AA/2AB/31A/31B 97 99 100 Winding Type DLW21S/DLW21H/DLW31S Winding Type for Large Current DLW5AH/DLW5BS 101 104 5 Lead Type EMI Suppression Filters (EMIFILr) Ferrite Beads Inductors Part Numbering Block Type EMIFILr BL01/BL02/BL03 105 BNX Disc Type EMIFILr Part Numbering Common Mode Choke Coils DSp6/Broad Band DSp9N/Heavy-duty Type DSp9H 109 PLT09H EMIGUARDr (EMIFILr with Varistor Function) Part Numbering VFR3V/VFS6V/VFS9V 117 125 Part Numbering 127 6 6 Microwave Absorbers Part Numbering EA10/EA20/EA21 129 130 !Caution / Notice 132 Soldering and Mounting 134 Packaging 143 Chip EMI Suppression Filter Design Kits 147 Outlines of Major Noise Regulation Standards 152 Noise Suppression Principles by DC EMIFILr 157 Murata EMI Filter Selection Simulator 161 Recycled Paper C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Selection Guide of EMI Filters Start Headphone Line Common Mode Choke Coils 1008 Type of Circuit DLM2HG 600Ω DC Power Line General Signal Line High Speed Signal Line Ground Condition Ground Condition Signal Freq. and Noise Poor Good Poor Good Chip Ferrite Beads 3-terminal Capacitors Chip Ferrite Beads 3-terminal Capacitors Capacitor Type Separate Chip Ferrite Beads Capacitor Type 0603 0603 0201 BLM18P NFM18P 0.5–3A 2A 0805 0805 Mixed 3-terminal Capacitors Common Mode Choke Coils Combined LC T Filter 0603 0402 BLM03A NFM18C 10–120Ω 22–22000pF 0402 0805 0603 0603 0504 BLM15B NFL18ST DLP11S 5–1000Ω 100–500MHz 90–200Ω Combined LC Filter 1206 0603 BLM21P NFM21P BLM15A NFM21C BLM18B 1.5–6A 2–4A 10–1000Ω 22–22000pF 5–2500Ω 1206 1806 0603 1205 0603 DLP31S NFL18SP 150–500MHz 120–550Ω 0805 0805 BLM31P NFM41P BLM18A/R NFM3DC BLM18HD/HB 1.5–6A 2A 120–1000Ω 22–22000pF 120–1000Ω 1806 Combined LC T Filter 0603 Capacitor Array 0805 1206 1206 BLM18HG/HK/EG BLM21B 1–6A 100–1000Ω 5–2700Ω 6A 0805 2706 BLM21A/R NFE61P 2A Common Mode Choke Coils NFA31C 0804 Combined LC T Filter 0804 Combined RC Filter 1206 BLA2AB 22–2200pF BLA2AA 0.2–5A 190–4000Ω 10–1000Ω 1206 NFE61P 1206 33–4700pF BLA31A 30–1000Ω 0805 67–180Ω 1206 0805 DLW31S NFR21G 2020/2014 90–2200Ω 22–100Ω 10–100pF Combined RC Array BLA31B 120–1000Ω DLW5BS(AH) NFW31S Arrays NFE31P 67–370Ω DLW21H 10–500MHz 2706 2020/2014 20–500MHz 22–22000pF 120–1000Ω Arrays NFL21S 1206 BLM41P NFE31P DLW21S 1206 120–1000Ω DLW5BS(AH) 190–4000Ω Arrays NFA31G 1206 6.8–100Ω 10–100pF DLP31D 90–440Ω Dimensions in inches High Current EMI Filters Standard EMI Filters EMI Filters for High Speed Signal Lines Impedance is typical value at 100MHz. 2 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Products Guide/Effective Frequency Range Product Guide Type Inductor Type For Digital Interfaces Series BLM18R BLM21R Standard BLM03A BLM15A BLM18A BLM21A BLM31A BLM41A For High Speed Signals 1.6 0.8 0603 1.25 0805 0.3 0201 0.5 0402 0.8 0603 1.25 0805 1.6 1206 1.6 1806 1.0 0804 1.6 1206 0.5 0402 0.8 0603 1.25 0805 1.6 1206 1.0 0804 1.6 1206 0.8 0603 1.25 0805 1.6 1206 1.6 1806 0.8 0603 0.8 0603 0.8 0603 0.8 0603 0.8 0603 2.0 0.6 1.0 1.6 2.0 3.2 4.5 2.0 BLA31A (4 circuits array) 3.2 BLM15B BLM21B BLM31B 1.0 1.6 2.0 3.2 BLA2AB (4 circuits array) 2.0 BLA31B (4 circuits array) 3.2 BLM18P BLM21P BLM31P BLM41P For GHz Range Noise Suppression EIA Code BLA2AA (4 circuits array) BLM18B For High Current Dimensions (mm) 1.6 2.0 3.2 4.5 BLM18HG 1.6 BLM18HB 1.6 BLM18HD 1.6 BLM18HK 1.6 BLM18EG 1.6 Effective Frequency Range 10kHz 100kHz 1MHz 10MHz100MHz 1GHz 10GHz Continued on the following page. 3 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Products Guide/Effective Frequency Range Continued from the preceding page. Type Capacitor Type Standard Type Series NFM18C NFM21C NFM3DC NFM41C For Signal Lines NFL18SP 1.6 NFW31S NFM18P NFM21P NFM3DP NFM41P NFE31P 1.25 0805 1.25 1205 1.6 1806 1.6 1206 0.8 0603 0.8 0603 1.25 0805 1.25 0805 1.6 1206 1.6 1206 0.8 0603 1.25 0805 1.25 1205 1.6 1806 1.6 1206 1.6 2706 1.6 1806 1.0 0504 1.6 1206 1.6 1206 2.0 1008 1.2 0805 1.2 0805 1.6 1206 4.5 1.6 NFA31G (4 circuits array) 0603 3.2 NFL18ST EIA Code 0.8 2.0 3.2 NFR21G T Filter for High Current 1.6 NFA31C (4 circuits array) NFL21S For High Current Dimensions (mm) 2.0 2.0 3.2 3.2 1.6 2.0 3.2 4.5 3.2 Effective Frequency Range 10kHz 100kHz 1MHz 10MHz100MHz 1GHz 10GHz 6.8 NFE61P(H) With Varistor Function Common Mode Choke Coils VFM41R DLP11S DLP31S DLP31D DLM2HG DLW21S DLW21H DLW31S DLW5BS (DLW5AH) 4.5 1.25 3.2 3.2 2.5 2.0 2.0 3.2 5.0 2020 5.0 (3.6) (2014) Continued on the following page. 4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please C31E9.pdf 03.3.12 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Products Guide/Effective Frequency Range Continued from the preceding page. Type Series Dimensions (mm) EIA Code Effective Frequency Range 10kHz 100kHz 1MHz 10MHz100MHz 1GHz 10GHz Disc EMIFIL® BL01/02/03 DSN6/9(H) DSS6/9(H) DST9(H) EMIGUARD® (EMI Filters with varistor functions) VFR3V VFS6V/9V Block EMIFIL® BNX Common Mode Choke Coils PLT09H EMC Absorber EA10/20/21 5 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Please read read rating rating and and !CAUTION !CAUTION (for (for storage, storage, operating, operating, rating, rating, soldering, soldering, mounting mounting and and handling) handling) in in this this PDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact for product before ordering. • This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe ourapproval productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Outline of EMI Suppression Filters (EMIFILr) for DC Line oChip Ferrite Bead oFerrite Bead Inductor Chip Ferrite Bead .............P.18–65 BLM03 BLM21 BLM15 BLM31 BLM18 BLM41 Ferrite Bead Inductor ..........P.106–108 BLA2A BL01 BL02RN1R3J2B BL02RN2R3J2B BL02RN1 BL02RN2R1M2B BL03RN2R1M1B BLA31 " Chip Ferrite Beads are effective for frequencies ranging from a few MHz to a few GHz. Chip Ferrite Beads are widely used as a low noise countermeasure, as well as a universal noise suppression component. " Chip Ferrite Beads produce a micro inductance in the low frequency range. At high frequencies, however, the resistive component of the inductor produces the primary impedance. When inserted in series in the noise producing circuit, the resistive impedance of the inductor prevents noise propagation. [Equivalent Circuit] R(f) [Impedance-Frequency Characteristics (typical)] 1000 Impedance [Ω] 800 600 Z 400 R 200 0 X 1 10 100 Frequency [MHz] R : Real Part (Resistive Portion) 6 1000 X : Imaginary Part (Inductive Portion) C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Please read read rating rating and and !CAUTION !CAUTION (for (for storage, storage, operating, operating, rating, rating, soldering, soldering, mounting mounting and and handling) handling) in in this this PDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact for product before ordering. • This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe ourapproval productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Outline of EMI Suppression Filters (EMIFILr) for DC Line oChip EMIFILr oT-type Chip EMIFILr oDisk Type EMIFILr T-type Chip EMIFILr ...........P.86–88 Chip EMIFILr ..............P.70–73 P.74 P.89–92 NFM21C NFM18P NFM21P NFE31P NFM3DC NFE61P/H NFA31C Disk Type EMIFILr ...........P.110–116 " This capacitor type EMI suppression filter has a large noise suppression effect at frequencies ranging from a few MHz to hundreds of MHz. This type of filter is used widely as a universal, high performance EMI suppression component. " The chip EMIFILr incorporates a built-in three-terminal capacitor, eliminating the lead wire and thereby increasing the high-frequency performance characteristic. " The T-type chip EMIFILr is a chip EMI suppression filter with a built-in feed-thru capacitor. The use of ferrite beads on input and output terminals minimizes resonance with surrounding circuits. " Whatever the situation, 3-terminal construction reduces residual inductance, thereby substantially improving noise suppression at frequencies over 10MHz. DS-9 DS-9H [Comparison of Insertion Loss Characteristics] 0 Insertion Loss [dB] DS-6 C 2200PF 20 40 l ina rm or Te cit 2- apa C 3(B Te (D uilt- rmin SS in al 9H Be Ca B3 ad) pac 2E ito r 22 2Q 55 ) Ide Ch al Caparacter acit istics or of 60 80 1 5 10 r ito ac 5) ap 2Q5 C l 22 ina 2E rm B3 Te N9H 3 S (D 50 100 500 1000 Frequency [MHz] A 3-terminal capacitor has a higher self resonance frequency than a general 2-terminal type and exhibits effective noise suppression at high frequency. 7 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Please read read rating rating and and !CAUTION !CAUTION (for (for storage, storage, operating, operating, rating, rating, soldering, soldering, mounting mounting and and handling) handling) in in this this PDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact for product before ordering. • This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe ourapproval productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Outline of EMI Suppression Filters (EMIFILr) for DC Line oChip EMIFILr for Signal Line oChip EMIFILr with Waveform Distortion Suppressing Function Chip EMIFILr for Signal Line ........P.30–39 P.53–56 P.81–85 NFL18ST NFL18SP NFL21S BLM18B/18HD BLM21B " High-speed signal application EMIFILr are high performance EMI suppression filters which increase the slope of insertion loss frequency characteristic curves (shape factor), thereby improving noise and signal separation. These are used for high speed signal applications in which noise and signal frequency approach the same value. To avoid the elimination of both the noise and specific signal components, 3-terminal capacitors and other components are applied. An NFW31S with a built-in capacitor and an inductor type BLM--B are available. BLM18HD has additional performance for suppressing GHz range noise after cut off frequency. " The EMIFILr with waveform distortion suppressing function suppresses waveform distortion caused by the resonance of digital ICs and surrounding circuits. NFR21G NFA31G [Comparison of Insertion Loss Characteristics] 0 NFW31S Insertion Loss [dB] NFW31S Chip EMIFILr with Waveform Distortion Suppressing Function ......P.75–80 Conventional Type 20 40 60 80 1 5 10 50 100 Frequency [MHz] [Waveform change when filter is inserted] Conventional Type (Chip 3-terminal Capacitor) EMIFILr for Signal Line NFW31S series 8 500 10002000 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Please read read rating rating and and !CAUTION !CAUTION (for (for storage, storage, operating, operating, rating, rating, soldering, soldering, mounting mounting and and handling) handling) in in this this PDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact for product before ordering. • This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe ourapproval productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Outline of EMI Suppression Filters (EMIFILr) for DC Line oChip Common Mode Choke Coil oCommon Mode Choke Coil Chip Common Mode Choke Coil ......P.97–104 DLP11S DLP31S DLW21S DLP31D DLW21H Common Mode Choke Coil ..........P.128 DLM2HG DLW31S PLT09H DLW5BS " These choke coils reduce common mode noise, which causes problems on balanced transmission lines, and are effective against common mode noise in the several MHz to several 100 MHz frequency range. They are ideally suited for noise suppression on DC power supply lines and interface cables. [Construction of Common Mode Choke Coil] Current of Common Mode (Noise) Current of Differential Mode (Signal) [Equivalent Circuit] [Impedance-Frequency Characteristics (DLW31S)] 10000 DLW31SN222SQ2 Common mode DLW31SN102SQ2 DLW31SN601SQ2 DLW31SN261SQ2 1000 DLW31SN161SQ2 DLW31SN900SQ2 Impedance (Ω) DLW5AH 100 10 SN161 SN900 1 SN222 SN102 SN601 SN261 Differential mode 0.1 1 10 100 1000 Frequency (MHz) 9 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Please read read rating rating and and !CAUTION !CAUTION (for (for storage, storage, operating, operating, rating, rating, soldering, soldering, mounting mounting and and handling) handling) in in this this PDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact for product before ordering. • This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe ourapproval productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Outline of EMI Suppression Filters (EMIFILr) for DC Line oChip EMIGUARDr oEMIGUARDr Chip EMIGUARDr ............P.94–95 EMIGUARDr .............P.118–124 VFM41R VFR3V [Construction of EMIGUARDr (VFS9V)] , " EMIGUARDr eliminates both surge noises and EMI noises due to its dielectric varistor material. " Effective when high frequency noise and high voltage surge suppression are required, and also in situations when surging starts at extremely high speeds. This type of surging cannot be eliminated with general type varistors. " VFM41R is chip type of EMIGUARDr. Varistor Electrode Ferrite Lead !Surge Absorption Effect of EMIGUARDr Type of Filter Surge Absorption Effect of EMIGUARDr 4kV 500V /div No filter −1kV −100ns 50ns/div 400ns 50ns/div 400ns 50ns/div 400ns 4kV 500V /div 3-terminal capacitor is used to suppress the surge. −1kV −100ns 4kV EMIGUARDr is used to suppressthe surge. (VFS6V) 500V /div −1kV −100ns 10 VFS9V VFS6V C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Please read read rating rating and and !CAUTION !CAUTION (for (for storage, storage, operating, operating, rating, rating, soldering, soldering, mounting mounting and and handling) handling) in in this this PDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact for product before ordering. • This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe ourapproval productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Outline of EMI Suppression Filters (EMIFILr) for DC Line oBlock Type EMIFILr Block Type EMIFILr ..........P.125–126 BNX003-01 BNX005-01 " Block type EMIFILr are resin encased, built-in, high performance EMI suppression filters, which use a feed-thru capacitor having excellent high frequency characteristics. " Used when the noise frequency is high, or when extreme countermeasures are required. " The high performance EMIFILr BNX series exhibits significant noise suppression effects over a wide frequency band (extending from 100kHz to 1GHz) in DC power lines. [Equivalent Circuit (BNX Series)] L1 L3 B C2 CB C1 L2 PSG CG PSG: Power Supply Ground CG: Circuit Ground CB: Circuit + B [Insertion Loss Characteristics] 0 BNX003-01 20 Insertion Loss [dB] BNX002-01 40 BNX002-01 (BNX005-01) 60 80 100 0.001 0.01 0.1 1 10 Frequency [MHz] 100 1000 11 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. On-Board Type (DC) EMI Suppression Filters (EMIFILr) Chip Ferrite Beads 1 Part Numbering Chip Ferrite Beads (Global Part Number) BL M 18 AG 102 q w e r t S N 1 D y u i o tImpedance qProduct ID Expressed by three figures. The unit is in ohm (Ω). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. Product ID BL Chip Ferrite Beads yPerformance wType Code Type A Array Type M Monolithic Type Expressed by a letter. Ex.) eDimensions (LgW) Code Performance S Sn Plating uCategory Code Dimensions (LgW) EIA Code 03 0.6g0.3mm 0201 N Standard Type 15 1.0g0.5mm 0402 H for Heavy-duty Category 18 1.6g0.8mm 0603 2A 2.0g1.0mm 0804 21 2.0g1.25mm 0805 Code 31 3.2g1.6mm 1206 1 1 Circuit 41 4.5g1.6mm 1806 4 4 Circuits iNumber of Circuits Number of Circuits rCharacteristics/Applications Code *1 AG AJ Series Characteristics/Applications BLM31/BLM41 AF for General Use BLM03/BLM15/BLM18/BLM21/BLM31/BLA2A/BLA31 BLM21/BLM31 AH BLM21 BA BLM18 BB BD for High-speed Signal Lines BE PF PG BLM31 for Power Supplies RK for Digital Interface HG for GHz Band General Use EG for GHz Band General Use (Low DC Resistance type) HB HD HK BLM15/BLM18/BLM21/BLA2A BLM15/BLM18/BLM21/BLA31 BLM41 BLM18/BLM21/BLM31/BLM41 BLM18/BLM21 BLM18 for GHz Band High-speed Signal Line BLM18 for GHz Band Digital Interface BLM18 *1 Frequency characteristics vary with each code. oPackaging Code Packaging K Plastic Taping (ø330mm Reel) L Plastic Taping (ø180mm Reel) BLM31/BLM41/BLM21 *1 B Bulk J Paper Taping (ø330mm Reel) BLM15/BLM18/BLM21*2 /BLA31 D Paper Taping (ø180mm Reel) BLM03/BLM15/BLM18/BLM21*2 /BLA2A/BLA31 C Bulk Case *1 BLM21BD222SN1/BLM21BD272SN1 only. *2 Except BLM21BD222SN1/BLM21BD272SN1 12 Series All series BLM15/BLM18 catalog to prevent smoking and/or burning, Please read read rating rating and and !CAUTION !CAUTION (for (for storage, storage, operating, operating, rating, rating, soldering, soldering, mounting mounting and and handling) handling) in in this this PDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please C31E9.pdf 03.3.12 you are requested approvespecifications. our product specifications or to transact for product before ordering. • This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe ourapproval productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. On-Board Type (DC) EMI Suppression Filters(EMIFILr) Chip Ferrite Bead BLM Series Essential for Noise Suppression in High Speed Signal Lines and DC Power Lines The chip ferrite bead BLM series comprises ferrite beads in the shape of a chip. This ferrite bead generates a high impedance which at high frequencies mainly consists of a resistance element. The BLM series is effective in circuits without stable ground lines because the BLM series does not need a connection to ground. Chip sizes of 0.6Z0.3, 1.0Z0.5, 1.6Z0.8, 2.0Z1.25, 3.2Z1.6 and 4.5Z1.6mm are cataloged. (The BLA series of array type chip ferrite beads is also cataloged.) The nickel barrier structure of the external electrodes provides excellent solder heat resistance. !Features The BLM series comprises the R series (for digital interface), the A series (for standard), the B series (for high speed signal), the P series (for large current), and the H/E series (for GHz range noise suppression). 1. BLM--R series – For Digital Interface The BLM-R series can be used in Digital Interface. Resistance of BLM-R series especially grows in the lower frequency range. Therefore BLM-R series is less effective for digital signal waveform at low frequency range and can suppress the ringing. 2. BLM--A series – For Standard The BLM-A series generates an impedance from the relatively low frequencies. Therefore the BLM-A series is effective in noise suppression in the wide frequency range (30MHz – several hundred MHz). 3. BLM--B series – For High Speed Signal The BLM-B series can minimize attenuation of the signal waveform due to its sharp impedance characteristics. Various impedances are available to match signal frequency. 4. BLM--P series – For Large Current The BLM-P series can be used in high current circuits due to its low DC resistance. It can match power lines to a maximum of 6A DC (BLM41P). 5. BLM18H/E series – For GHz Range Noise Suppression The BLM18H/E series has a modified internal electrode structure that minimizes stray capacitance and increases the effective frequency range. [Impedance Characteristics] BLM18HG102SN1 1800 BLM18BD102SN1 Impedance (Ω) 1500 1200 BLM18RK102SN1 900 600 300 BLM18AG102SN1 0 1 10 100 1000 Frequency (MHz) 13 1 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Please read read rating rating and and !CAUTION !CAUTION (for (for storage, storage, operating, operating, rating, rating, soldering, soldering, mounting mounting and and handling) handling) in in this this PDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact for product before ordering. • This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe ourapproval productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. !Impedance Map 2700 2500 2250 2200 2200 1800 1800 1500 1500 1000 1 1000 1000 1000 1000 1000 1000 1000 1000 1000 (1.5A) 1000 750 Impedance (Ω) at 100MHz 600 600 600 470 470 600 600 600 600 470 470 470 420 420 330 330 220 220 150 150 600 600 600 470 470 600 (1.5A) 600 470 (2A) 470 400 390 (2A) 220 330 330 220 220 150 150 120 120 220 220 220 330 220 (2A) 220 180 (3A) 180 (1.5A) 150 390 330 (1.5A) 140 120 120 120 120 120 120 120 (3A) 120 (2A) 120 100 100 80 80 (1A) 75 70 75 75 60 60 75 (3A) 70 70 60 (0.5A) 60 (6A) 60 (3A) 50 (3A) 47 47 33 (6A) 33 (3A) 30 (1A) 30 (3A) 26 22 (6A) 22 10 10 10 10 5 0603 1005 1608 2012 3216 4615 1005 1608 2012 3216 1608 2012 For Standard BLMppA For High Speed Signal BLMppB For Digital Interface BLMppR size (mm) 14 1608 2012 3216 For Large Current BLMppP ( )=Rated Current 4516 1608 GHz Range Noise Suppression Type BLM18H/E C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Please read read rating rating and and !CAUTION !CAUTION (for (for storage, storage, operating, operating, rating, rating, soldering, soldering, mounting mounting and and handling) handling) in in this this PDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact for product before ordering. • This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe ourapproval productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. !BLM Series Size (inches) Type 0603 For Standard For Standard 0402 For High Speed Signal (Sharp impedance characteristics) For Standard Part Number Impedance (Ω) at 1GHz BLM03AG100SN1 10 (Typ.) - 500 BLM03AG700SN1 70 (Typ.) - 200 BLM03AG121SN1 120±25% - 200 BLM15AG100SN1 10 (Typ.) - 1000 BLM15AG700SN1 70 (Typ.) - BLM15AG121SN1 120±25% - BLM15AG221SN1 220±25% - BLM15AG601SN1 600±25% - BLM15AG102SN1 - 200 5±25% - 500 BLM15BB100SN1 10±25% - BLM15BB220SN1 22±25% - BLM15BB470SN1 47±25% - BLM15BB750SN1 75±25% - BLM15BB121SN1 120±25% - BLM15BB221SN1 220±25% - BLM15BD471SN1 470±25% - BLM15BD601SN1 600±25% - BLM15BD102SN1 1000±25% - BLM18AG121SN1 120±25% - BLM18AG151SN1 150±25% - BLM18AG221SN1 220±25% - BLM18AG331SN1 330±25% - BLM18AG471SN1 300 200 200 470±25% - BLM18AG601SN1 600±25% - BLM18AG102SN1 1000±25% - 100 - 500 - 700 5±25% BLM18BA100SN1 BLM18BB100SN1 10±25% BLM18BA220SN1 BLM18BB220SN1 22±25% BLM18BA470SN1 BLM18BB470SN1 BLM18BB600SN1 47±25% 60±25% BLM18BA750SN1 BLM18BB750SN1 75±25% BLM18BA121SN1 BLM18BB121SN1 BLM18BB141SN1 140±25% 150±25% BLM18BB221SN1 BLM18BD221SN1 220±25% BLM18BB331SN1 BLM18BD331SN1 BLM18BD421SN1 330±25% 420±25% BLM18BB471SN1 BLM18BD471SN1 - 500 - 300 - 500 - 200 - 300 - 200 - BLM18BB151SN1 BLM18BD151SN1 - 120±25% BLM18BD121SN1 For High Speed Signal (Sharp impedance characteristics) 300 1000±25% BLM18BB050SN1 1 500 BLM15BB050SN1 BLM18BA050SN1 0603 Rated Current (mA) at 100MHz 470±25% - 200 - 50 - 200 BLM18BD601SN1 600±25% - 200 BLM18BD102SN1 1000±25% - 100 BLM18BD152SN1 1500±25% - BLM18BD182SN1 1800±25% - BLM18BD222SN1 2200±25% - BLM18BD252SN1 2500±25% - 50 Continued on the following page. 15 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Please read read rating rating and and !CAUTION !CAUTION (for (for storage, storage, operating, operating, rating, rating, soldering, soldering, mounting mounting and and handling) handling) in in this this PDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact for product before ordering. • This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe ourapproval productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. Size (inches) Type For Digital Interface 1 For Large Current For Standard 0603 For High Speed Signal GHz Range For Digital Interface For Standard (Low DC Resistance Type) 0805 For Standard Part Number Impedance (Ω) at 1GHz BLM18RK121SN1 120±25% - BLM18RK221SN1 220±25% - BLM18RK471SN1 470±25% - BLM18RK601SN1 600±25% - BLM18RK102SN1 1000±25% - BLM18PG300SN1 30 (Typ.) - 1000 BLM18PG330SN1 33±25% - 3000* BLM18PG600SN1 60 (Typ.) - 500 BLM18PG121SN1 120±25% - 2000* BLM18PG181SN1 180±25% - 1500* BLM18HG471SN1 470±25% 600 (Typ.) BLM18HG601SN1 600±25% 700 (Typ.) BLM18HG102SN1 1000±25% 1000 (Typ.) 100 BLM18HB121SN1 120±25% 500±40% 200 BLM18HB221SN1 220±25% 1100±40% 100 BLM18HB331SN1 330±25% 1600±40% 50 BLM18HD471SN1 470±25% 1000 (Typ.) BLM18HD601SN1 600±25% 1200 (Typ.) BLM18HD102SN1 1000±25% 1700 (Typ.) BLM18HK331SN1 330±25% 400±40% BLM18HK471SN1 470±25% 600±40% 200 100 50 200 600±25% 700±40% BLM18HK102SN1 1000±25% 1200±40% 50 BLM18EG101TN1 100±25% 140 (Typ.) 2000* BLM18EG121SN1 100 120±25% 145 (Typ.) 2000* BLM18EG391TN1 390±25% 520 (Typ.) 500 BLM18EG601SN1 600±25% 700 (Typ.) 300 BLM21AG121SN1 120±25% - BLM21AG151SN1 150±25% - BLM21AG221SN1 220±25% - BLM21AG331SN1 330±25% - BLM21AJ401SN1 400±25% - BLM21AG471SN1 470±25% - BLM21AJ601SN1 600±25% BLM21AG102SN1 BLM21AH102SN1 16 200 BLM18HK601SN1 BLM21AG601SN1 * Please see P. 51 "Derating of Rated Current". Rated Current (mA) at 100MHz 1000±25% 200 Continued on the following page. C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Please read read rating rating and and !CAUTION !CAUTION (for (for storage, storage, operating, operating, rating, rating, soldering, soldering, mounting mounting and and handling) handling) in in this this PDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact for product before ordering. • This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe ourapproval productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. Size (inches) Type Part Number Impedance (Ω) at 100MHz at 1GHz BLM21BB050SN1 5±25% - BLM21BB600SN1 60±25% - BLM21BB750SN1 75±25% - BLM21BB121SN1 BLM21BD121SN1 120±25% BLM21BB151SN1 BLM21BD151SN1 BLM21BB201SN1 150±25% 200±25% BLM21BB221SN1 BLM21BD221SN1 220±25% BLM21BB331SN1 For High Speed Signal (Sharp impedance characteristics) BLM21BD331SN1 BLM21BD421SN1 330±25% 420±25% BLM21BB471SN1 BLM21BD471SN1 0805 For Digital Interface For Large Current For Standard For High Speed Signal (Sharp impedance characteristics) 1206 For Large Current For Standard For Large Current 500 - 1 - 200 - BLM21BD601SN1 600±25% - BLM21BD751SN1 750±25% - BLM21BD102SN1 1000±25% - BLM21BD152SN1 1500±25% - BLM21BD182SN1 1800±25% - BLM21BD222SN1 2250 (Typ.) - BLM21BD222TN1 2200±25% - BLM21BD272SN1 2700±25% - BLM21RK121SN1 120±25% - BLM21RK221SN1 220±25% - BLM21RK471SN1 470±25% - BLM21RK601SN1 600±25% - BLM21RK102SN1 1000±25% - BLM21PG220SN1 22±25% - BLM21PG300SN1 30 (Typ.) - BLM21PG600SN1 60±25% - BLM21PG221SN1 220±25% - 2000* BLM21PG331SN1 330±25% - 1500* BLM31AJ260SN1 26±25% - 500 BLM31AF700SN1 70±25% - BLM31AJ601SN1 600±25% - BLM31BE601FN1 600±25% - 300 BLM31PG330SN1 33±25% - 6000* BLM31PG500SN1 50 (Typ.) - BLM31PG121SN1 120±25% - BLM31PG391SN1 390±25% - 2000* BLM31PG601SN1 600±25% - 1500* BLM41AF800SN1 80±25% - 500 BLM41AF151SN1 150±25% - 200 BLM41PG600SN1 60 (Typ.) - 6000* 3000* BLM41PG750SN1 1806 470±25% Rated Current (mA) 200 6000* 3000* 200 3000* 75 (Typ.) - BLM41PF800SN1 80 (Typ.) - 1000* BLM41PG181SN1 180±25% - 3000* BLM41PG471SN1 470±25% - 2000* BLM41PG102SN1 1000±25% - 1500* * Please see P.51 "Derating of Rated Current". 17 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. On-Board Type (DC) EMI Suppression Filters (EMIFILr) Chip Ferrite Beads BLM03/BLM15/BLM18/BLM21/BLM31/BLM41 Series ■ Features (BLM_A Series) The chip ferrite bead BLM series comprises ferrite beads in the shape of a chip. This ferrite bead generates a high impedance which at high frequency mainly consists of a resistance element. The BLM series is effective in circuits without stable ground lines because the BLM series does not need a connection to ground. The nickel barrier structure of the external electrodes provides excellent solder heat resistance. BLM_A series generates an impedance from the relatively low frequencies. Therefore BLM_A series is effective in noise suppression in a wide frequency range (30MHz - several hundred MHz). The small size of BLM03 series (0.6x0.3mm) is suitable for noise suppression in small equipment such as PA modules for cellular phones. ■ Equivalent Circuit (Resistance element becomes dominant at high frequencies.) BLM03A Series (0201 Size) 0.6±0.03 0.3±0.03 0.3±0.03 1 0.15±0.05 : electrode (in mm) Impedance (at 100MHz, 20 degree C) (ohm) Rated Current (mA) DC Resistance (max.) (ohm) Operating Temperature Range (°C) BLM03AG100SN1 10 (Typ.) 500 0.1 -55 to 125 BLM03AG700SN1 70 (Typ.) 200 0.5 -55 to 125 BLM03AG121SN1 120 ±25% 200 0.8 -55 to 125 Part Number 18 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. ■ Impedance-Frequency (Typical) BLM03 Series 300 250 Impedance (Ω) 200 BLM03AG121SN1 150 1 100 BLM03AG700SN1 BLM03AG100SN1 50 0 1 10 1000 2000 100 Frequency (MHz) ■ Impedance-Frequency Characteristics BLM03AG100SN1 BLM03AG700SN1 20 150 120 Impedance (Ω) Impedance (Ω) 15 Z 10 R 90 Z R 60 X 5 30 X 0 1 10 1000 2000 100 0 1 10 Frequency (MHz) 100 1000 2000 Frequency (MHz) BLM03AG121SN1 300 250 Impedance (Ω) 200 150 Z R 100 X 50 0 1 10 100 1000 2000 Frequency (MHz) BLM15A Series (0402 Size) 0.5±0.05 0.25±0.1 1.0±0.05 0.5±0.05 BLM15A Series (in mm) 19 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Impedance (at 100MHz, 20 degree C) (ohm) Rated Current (mA) DC Resistance (max.) (ohm) Operating Temperature Range (°C) BLM15AG100SN1 10 (Typ.) 1000 0.05 -55 to 125 BLM15AG700SN1 70 (Typ.) 500 0.15 -55 to 125 BLM15AG121SN1 120 ±25% 500 0.25 -55 to 125 BLM15AG221SN1 220 ±25% 300 0.35 -55 to 125 BLM15AG601SN1 600 ±25% 300 0.6 -55 to 125 BLM15AG102SN1 1000 ±25% 200 1.0 -55 to 125 Part Number ■ Impedance-Frequency (Typical) BLM15A Series 1200 BLM15AG102SN1 Impedance (ohm) 1000 800 BLM15AG601SN1 600 BLM15AG221SN1 BLM15AG121SN1 400 BLM15AG700SN1 BLM15AG100SN1 200 0 1 10 100 1000 Frequency (MHz) ■ Impedance-Frequency Characteristics BLM15AG100SN1 BLM15AG700SN1 120 20 100 Z Impedance (ohm) Impedance (ohm) 15 R 10 80 Z R 60 40 X 5 X 20 0 0 1 10 100 1 1000 10 100 1000 Frequency (MHz) Frequency (MHz) BLM15AG121SN1 BLM15AG221SN1 400 200 300 Impedance (ohm) 150 Impedance (ohm) 1 Z R 100 Z R 200 100 50 X X 0 0 1 10 100 Frequency (MHz) 1000 1 10 100 1000 Frequency (MHz) Continued on the following page. 20 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. ■ Impedance-Frequency Characteristics BLM15AG601SN1 BLM15AG102SN1 1200 800 Z 900 Z Impedance (Ω) Impedance (Ω) 600 R 400 R 600 1 300 200 X X 0 0 1 10 100 1 1000 10 100 1000 Frequency (MHz) Frequency (MHz) BLM18A Series (0603 Size) 0.8±0.15 0.4±0.2 1.6±0.15 0.8±0.15 BLM18A Series (in mm) Impedance (at 100MHz, 20 degree C) (ohm) Rated Current (mA) DC Resistance (max.) (ohm) Operating Temperature Range (°C) BLM18AG121SN1 120 ±25% 200 0.20 -55 to 125 BLM18AG151SN1 150 ±25% 200 0.25 -55 to 125 BLM18AG221SN1 220 ±25% 200 0.30 -55 to 125 BLM18AG331SN1 330 ±25% 200 0.45 -55 to 125 BLM18AG471SN1 470 ±25% 200 0.50 -55 to 125 BLM18AG601SN1 600 ±25% 200 0.50 -55 to 125 BLM18AG102SN1 1000 ±25% 100 0.70 -55 to 125 Part Number ■ Impedance-Frequency (Typical) BLM18A Series 1200 BLM18AG102SN1 BLM18AG601SN1 Impedance (Ω) 900 BLM18AG471SN1 BLM18AG331SN1 BLM18AG221SN1 600 BLM18AG151SN1 BLM18AG121SN1 300 0 1 10 100 1000 Frequency (MHz) 21 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. ■ Impedance-Frequency Characteristics BLM18AG121SN1 BLM18AG151SN1 200 400 150 300 1 Impedance (Ω) Impedance (Ω) Z R 100 200 Z R X 50 100 X 0 1 10 100 0 1000 1 10 Frequency (MHz) BLM18AG221SN1 1000 BLM18AG331SN1 600 400 450 300 Z Impedance (Ω) Impedance (Ω) 100 Frequency (MHz) R 200 X 100 Z R 300 150 X 0 0 1 10 100 1 1000 10 100 1000 Frequency (MHz) Frequency (MHz) BLM18AG471SN1 BLM18AG601SN1 800 800 600 600 Z R Impedance (Ω) Impedance (Ω) Z R 400 200 0 10 100 1000 Frequency (MHz) BLM18AG102SN1 Z Impedance (Ω) 900 R 600 X 0 1 10 100 Frequency (MHz) 22 0 1 10 100 Frequency (MHz) 1200 300 X 200 X 1 400 1000 1000 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. BLM21A Series (0805 Size) 0.85±0.2 *1 0.5±0.2 *2 1 1.25±0.2 2.0±0.2 *1 BLM21BD222SN1 / 21BD272SN1 :1.25±0.2 *2 BLM21BD272SN1: 0.3±0.2 EIA CODE : 0805 BLM21A Series in mm Impedance (at 100MHz, 20 degree C) (ohm) Rated Current (mA) DC Resistance (max.) (ohm) Operating Temperature Range (°C) BLM21AG121SN1 120 ±25% 200 0.15 -55 to 125 BLM21AG151SN1 150 ±25% 200 0.15 -55 to 125 BLM21AG221SN1 220 ±25% 200 0.20 -55 to 125 BLM21AG331SN1 330 ±25% 200 0.25 -55 to 125 BLM21AJ401SN1 400 ±25% 200 0.85 -55 to 125 BLM21AG471SN1 470 ±25% 200 0.25 -55 to 125 BLM21AG601SN1 600 ±25% 200 0.30 -55 to 125 BLM21AJ601SN1 600 ±25% 200 1.10 -55 to 125 BLM21AG102SN1 1000 ±25% 200 0.45 -55 to 125 BLM21AH102SN1 1000 ±25% 200 0.45 -55 to 85 Part Number ■ Impedance-Frequency (Typical) BLM21A Series 1200 BLM21AH102SN1 BLM21AG102SN1 BLM21AJ601SN1 BLM21AG601SN1 Impedance (Ω) 900 BLM21AG471SN1 BLM21AJ401SN1 BLM21AG331SN1 BLM21AG221SN1 600 BLM21AG151SN1 BLM21AG121SN1 300 0 1 10 100 1000 Frequency (MHz) ■ Impedance-Frequency Characteristics BLM21AG121SN1 BLM21AG151SN1 200 200 150 150 Z R Impedance (Ω) Impedance (Ω) Z R 100 100 X X 50 50 0 0 1 10 100 Frequency (MHz) 1000 1 10 100 1000 Frequency (MHz) Continued on the following page. 23 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. ■ Impedance-Frequency Characteristics BLM21AG221SN1 BLM21AG331SN1 400 400 300 300 Z 1 Impedance (Ω) Impedance (Ω) R Z 200 R 200 100 X 100 X 0 0 1 10 100 1000 1 10 100 Frequency (MHz) 1000 Frequency (MHz) BLM21AJ401SN1 BLM21AG471SN1 800 500 400 300 Impedance (Ω) Impedance (ohm) 600 Z R 200 Z 400 R 200 100 X X 0 0 1 10 100 1 1000 10 Frequency (MHz) 100 1000 Frequency (MHz) BLM21AG601SN1 BLM21AJ601SN1 800 800 600 600 Impedance (Ω) Impedance (Ω) Z R 400 Z R 400 X 200 200 X 0 0 1 10 100 1000 1 10 Frequency (MHz) BLM21AG102SN1 1200 900 900 Z Impedance (Ω) Z Impedance (Ω) 1000 BLM21AH102SN1 1200 R 600 300 0 1 10 100 Frequency (MHz) R 600 X X 300 24 100 Frequency (MHz) 1000 0 1 10 100 Frequency (MHz) 1000 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. BLM31A Series (1206 Size) * 1.1±0.2 0.7±0.3 3.2±0.2 1 1.6±0.2 * BLM31AF700SN1 : 1.6±0.2 (in mm) BLM31A Series Impedance (at 100MHz, 20 degree C) (ohm) Rated Current (mA) DC Resistance (max.) (ohm) Operating Temperature Range (°C) 26 ±25% 500 0.05 -55 to 125 BLM31AF700SN1 70 ±25% 200 0.15 -55 to 125 BLM31AJ601SN1 600 ±25% 200 0.90 -55 to 125 Part Number BLM31AJ260SN1 ■ Impedance-Frequency (Typical) ■ Impedance-Frequency Characteristics BLM31A Series BLM31AJ260SN1 40 800 BLM31AJ601SN1 30 Z Impedance (Ω) Impedance (ohm) 600 400 R 20 10 200 X BLM31AF700SN1 BLM31AJ260SN1 0 0 1 10 100 1 1000 10 Frequency (MHz) 100 1000 Frequency (MHz) BLM31AF700SN1 BLM31AJ601SN1 800 100 Z 600 75 Z Impedance (Ω) Impedance (Ω) R 50 X R 400 X 200 25 0 0 1 10 100 Frequency (MHz) 1000 1 10 100 1000 Frequency (MHz) 25 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. BLM41A Series (1806 Size) 1.6±0.2 0.7±0.3 1 4.5±0.2 1.6±0.2 BLM41A Series (in mm) Impedance (at 100MHz, 20 degree C) (ohm) Rated Current (mA) DC Resistance (max.) (ohm) Operating Temperature Range (°C) BLM41AF800SN1 80 ±25% 500 0.10 -55 to 125 BLM41AF151SN1 150 ±25% 200 0.50 -55 to 125 Part Number ■ Impedance-Frequency (Typical) BLM41A Series 200 BLM41AF151SN1 Impedance (ohm) 150 BLM41AF800SN1 100 50 0 1 10 100 1000 Frequency (MHz) ■ Impedance-Frequency Characteristics BLM41AF800SN1 BLM41AF151SN1 200 100 Z 150 75 Impedance (Ω) Impedance (Ω) Z R 50 X X 50 25 0 0 1 10 100 Frequency (MHz) 26 R 100 1000 1 10 100 Frequency (MHz) 1000 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. ■ Features (BLM_B Series) The chip ferrite bead BLM series comprises ferrite beads in the shape of a chip. This ferrite bead generates a high impedance which at high frequencies mainly consists of a resistance element. The BLM series is effective in circuits without stable ground lines because the BLM series does not need a connection to ground. The nickel barrier structure of the external electrodes provides excellent solder heat resistance. The BLM_B series can minimize attenuation of the signal waveform due to its sharp impedance characteristics. Various impedances are available to match signal frequency. ■ Equivalent Circuit 1 (Resistance element becomes dominant at high frequencies.) BLM15B Series (0402 Size) 0.5±0.05 0.25±0.1 1.0±0.05 0.5±0.05 BLM15B Series (in mm) Impedance (at 100MHz, 20 degree C) (ohm) Rated Current (mA) DC Resistance (max.) (ohm) Operating Temperature Range (°C) BLM15BB050SN1 5 ±25% 500 0.08 -55 to 125 BLM15BB100SN1 10 ±25% 300 0.10 -55 to 125 BLM15BB220SN1 22 ±25% 300 0.20 -55 to 125 BLM15BB470SN1 47 ±25% 300 0.35 -55 to 125 BLM15BB750SN1 75 ±25% 300 0.40 -55 to 125 BLM15BB121SN1 120 ±25% 300 0.55 -55 to 125 BLM15BB221SN1 220 ±25% 200 0.80 -55 to 125 BLM15BD471SN1 470 ±25% 200 0.60 -55 to 125 BLM15BD601SN1 600 ±25% 200 0.65 -55 to 125 BLM15BD102SN1 1000 ±25% 200 0.90 -55 to 125 Part Number Rated current is 6A for taping type. 27 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. ■ Impedance-Frequency (Typical) BLM15BB Series BLM15BD Series 1600 800 700 BLM15BD102SN1 BLM15BB221SN1 1200 1 500 Impedance (Ω) Impedance (ohm) 600 BLM15BB121SN1 400 BLM15BB750SN1 BLM15BB470SN1 300 BLM15BD601SN1 800 BLM15BD471SN1 BLM15BB220SN1 400 BLM15BB100SN1 200 BLM15BB050SN1 100 0 0 1 10 100 1000 1 10 100 1000 Frequency (MHz) Frequency (MHz) ■ Impedance-Frequency Characteristics BLM15BB100SN1 60 25 50 Impedance (ohm) Impedance (ohm) BLM15BB050SN1 30 20 15 Z 10 30 Z 20 X 5 40 X 10 R R 0 0 1 10 100 1000 1 10 Frequency (MHz) 100 1000 Frequency (MHz) BLM15BB220SN1 BLM15BB470SN1 100 200 80 Impedance (ohm) Impedance (ohm) 150 60 Z 40 X Z 100 X 50 20 R R 0 0 1 10 100 1000 1 10 Frequency (MHz) BLM15BB750SN1 1000 BLM15BB121SN1 400 600 300 450 Impedance (ohm) Impedance (ohm) 100 Frequency (MHz) 200 Z Z 300 X X 100 150 R R 0 0 1 10 100 Frequency (MHz) 1000 1 10 100 1000 Frequency (MHz) Continued on the following page. 28 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. ■ Impedance-Frequency Characteristics BLM15BB221SN1 BLM15BD471SN1 800 1000 600 750 Impedance (Ω) Impedance (ohm) Z Z 400 X R 500 1 X 250 200 R 0 0 1 10 100 1000 1 10 Frequency (MHz) 100 BLM15BD601SN1 BLM15BD102SN1 1200 1600 Z Z 900 1200 Impedance (Ω) Impedance (Ω) 1000 Frequency (MHz) R 600 R 800 X X 300 400 0 1 10 100 Frequency (MHz) 1000 0 1 10 100 1000 Frequency (MHz) 29 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. BLM18B Series (0603 Size) 0.8±0.15 0.4±0.2 1 1.6±0.15 0.8±0.15 BLM18B Series (in mm) Impedance (at 100MHz, 20 degree C) (ohm) Rated Current (mA) DC Resistance (max.) (ohm) Operating Temperature Range (°C) 5 ±25% 500 0.20 -55 to 125 BLM18BB050SN1 5 ±25% 700 0.10 -55 to 125 BLM18BA100SN1 10 ±25% 500 0.25 -55 to 125 BLM18BB100SN1 10 ±25% 500 0.15 -55 to 125 BLM18BA220SN1 22 ±25% 500 0.35 -55 to 125 BLM18BB220SN1 22 ±25% 500 0.25 -55 to 125 BLM18BA470SN1 47 ±25% 300 0.55 -55 to 125 BLM18BB470SN1 47 ±25% 500 0.30 -55 to 125 BLM18BB600SN1 60 ±25% 200 0.35 -55 to 125 BLM18BA750SN1 75 ±25% 300 0.70 -55 to 125 BLM18BB750SN1 75 ±25% 200 0.35 -55 to 125 BLM18BA121SN1 120 ±25% 200 0.90 -55 to 125 BLM18BB121SN1 120 ±25% 200 0.50 -55 to 125 BLM18BD121SN1 120 ±25% 200 0.40 -55 to 125 BLM18BB141SN1 140 ±25% 200 0.55 -55 to 125 BLM18BB151SN1 150 ±25% 200 0.55 -55 to 125 BLM18BD151SN1 150 ±25% 200 0.40 -55 to 125 BLM18BB221SN1 220 ±25% 200 0.65 -55 to 125 BLM18BD221SN1 220 ±25% 200 0.45 -55 to 125 BLM18BB331SN1 330 ±25% 200 0.75 -55 to 125 BLM18BD331SN1 330 ±25% 200 0.50 -55 to 125 BLM18BD421SN1 420 ±25% 200 0.55 -55 to 125 BLM18BB471SN1 470 ±25% 50 1.00 -55 to 125 BLM18BD471SN1 470 ±25% 200 0.55 -55 to 125 BLM18BD601SN1 600 ±25% 200 0.65 -55 to 125 BLM18BD102SN1 1000 ±25% 100 0.85 -55 to 125 BLM18BD152SN1 1500 ±25% 50 1.20 -55 to 125 BLM18BD182SN1 1800 ±25% 50 1.50 -55 to 125 BLM18BD222SN1 2200 ±25% 50 1.50 -55 to 125 BLM18BD252SN1 2500 ±25% 50 1.50 -55 to 125 Part Number BLM18BA050SN1 30 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. ■ Impedance-Frequency (Typical) BLM18BA Series 10000 450 7500 300 Impedance (Ω) Impedance (Ω) BLM18BA Series 600 BLM18BA220SN1 5000 1 BLM18BA121SN1 BLM18BA100SN1 150 BLM18BA750SN1 2500 BLM18BA050SN1 BLM18BA470SN1 0 0 1 10 1000 100 2000 1 10 100 1000 2000 Frequency(MHz) Frequency(MHz) BLM18BB Series BLM18BB Series 200 2000 150 1500 BLM18BB471SN1 BLM18BB331SN1 Impedance (Ω) Impedance (Ω) BLM18BB470SN1 BLM18BB220SN1 100 BLM18BB100SN1 BLM18BB221SN1 BLM18BB151SN1 1000 BLM18BB141SN1 BLM18BB121SN1 BLM18BB050SN1 BLM18BB750SN1 500 50 BLM18BB600SN1 0 0 1 10 100 1 1000 10 100 1000 Frequency (MHz) Frequency (MHz) BLM18BD Series 2800 BLM18BD252SN1 BLM18BD222SN1 BLM18BD182SN1 2100 Impedance (Ω) BLM18BD152SN1 BLM18BD221SN1 BLM18BD102SN1 BLM18BD151SN1 BLM18BD601SN1 BLM18BD121SN1 1400 BLM18BD471SN1 BLM18BD421SN1 BLM18BD331SN1 700 0 1 10 100 1000 Frequency (MHz) ■ Impedance-Frequency Characteristics BLM18BA050SN1 BLM18BB050SN1 40 100 Z 30 R 50 X Impedance (Ω) Impedance (Ω) 75 20 Z R 10 25 X 0 0 1 10 100 Frequency(MHz) 1000 2000 1 10 100 1000 Frequency (MHz) Continued on the following page. 31 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. ■ Impedance-Frequency Characteristics BLM18BA100SN1 BLM18BB100SN1 200 40 Z 1 30 R Impedance (Ω) Impedance (Ω) 150 100 X 50 Z R 20 X 10 0 1 10 1000 100 0 2000 1 10 Frequency(MHz) BLM18BA220SN1 1000 BLM18BB220SN1 100 600 75 450 Z Impedance (Ω) Impedance (Ω) 100 Frequency (MHz) 300 Z R 50 X R 25 150 X 0 1 10 1000 100 0 2000 1 10 100 1000 Frequency (MHz) Frequency(MHz) BLM18BA470SN1 BLM18BB470SN1 1600 200 1200 150 Impedance (Ω) Impedance (Ω) Z 800 Z 400 X 10 X 50 0 1000 2000 100 100 R 0 1 R 1 10 Frequency(MHz) BLM18BB600SN1 1000 BLM18BA750SN1 400 6000 300 4500 Impedance (Ω) Impedance (Ω) 100 Frequency (MHz) 200 Z R 100 3000 1500 X Z R X 0 0 1 10 100 Frequency (MHz) 1000 1 10 100 1000 2000 Frequency(MHz) Continued on the following page. 32 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. ■ Impedance-Frequency Characteristics BLM18BB750SN1 BLM18BA121SN1 400 10000 7500 Z Impedance (Ω) Impedance (Ω) 300 R 200 5000 1 X 100 2500 Z R X 0 0 1 10 100 1 1000 10 2000 Frequency(MHz) BLM18BB121SN1 BLM18BD121SN1 600 400 450 300 Impedance (Ω) Impedance (Ω) 1000 100 Frequency (MHz) Z 300 Z 200 R X 100 150 X R 0 0 1 10 100 1 1000 10 100 1000 Frequency (MHz) Frequency (MHz) BLM18BB141SN1 BLM18BB151SN1 600 600 Z Z 450 Impedance (Ω) R 300 X R 300 X 150 150 0 0 1 10 100 1 1000 10 100 1000 Frequency (MHz) Frequency (MHz) BLM18BD151SN1 BLM18BB221SN1 600 800 Z R 450 600 Impedance (Ω) Impedance (Ω) Impedance (Ω) 450 Z 300 R 400 X X 150 200 0 1 10 100 Frequency (MHz) 1000 0 1 10 100 1000 Frequency (MHz) Continued on the following page. 33 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. ■ Impedance-Frequency Characteristics BLM18BD221SN1 BLM18BB331SN1 1600 800 1200 1 Impedance (Ω) Impedance (Ω) 600 Z 400 R Z R 800 X 400 200 X 0 0 1 10 100 1 1000 10 100 BLM18BD331SN1 BLM18BD421SN1 800 1000 600 750 Z Z Impedance (Ω) Impedance (Ω) 1000 Frequency (MHz) Frequency (MHz) R 400 X R 500 X 200 250 0 0 1 10 100 1000 1 10 Frequency (MHz) 100 1000 Frequency (MHz) BLM18BB471SN1 BLM18BD471SN1 2000 1200 Z 1500 800 Impedance (Ω) Impedance (Ω) Z R 1000 R 600 X X 500 400 0 1 10 100 0 1000 1 10 Frequency (MHz) 100 BLM18BD601SN1 BLM18BD102SN1 1200 2000 Z Z 900 1500 Impedance (Ω) Impedance (Ω) 1000 Frequency (MHz) R 600 X 300 R 1000 X 500 0 1 10 100 Frequency (MHz) 1000 0 1 10 100 1000 Frequency (MHz) Continued on the following page. 34 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. ■ Impedance-Frequency Characteristics BLM18BD152SN1 BLM18BD182SN1 2000 2400 Z 1500 1800 Impedance (Ω) Impedance (Ω) R 1000 X Z R 1200 1 X 500 600 0 1 10 100 0 1000 1 10 Frequency (MHz) BLM18BD222SN1 1000 BLM18BD252SN1 2800 2400 Z Z 2100 1800 R Impedance (Ω) Impedance (Ω) 100 Frequency (MHz) 1200 X R 1400 X 700 600 0 0 1 10 100 Frequency (MHz) 1000 1 10 100 1000 Frequency (MHz) 35 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. BLM21B Series (0805 Size) 0.85±0.2 *1 0.5±0.2 *2 1 1.25±0.2 2.0±0.2 *1 BLM21BD222SN1 / 21BD272SN1 :1.25±0.2 *2 BLM21BD272SN1: 0.3±0.2 EIA CODE : 0805 BLM21B Series in mm Impedance (at 100MHz, 20 degree C) (ohm) Rated Current (mA) DC Resistance (max.) (ohm) Operating Temperature Range (°C) BLM21BB050SN1 5 ±25% 500 0.07 -55 to 125 BLM21BB600SN1 60 ±25% 200 0.20 -55 to 125 BLM21BB750SN1 75 ±25% 200 0.25 -55 to 125 BLM21BB121SN1 120 ±25% 200 0.25 -55 to 125 BLM21BD121SN1 120 ±25% 200 0.25 -55 to 125 BLM21BB151SN1 150 ±25% 200 0.25 -55 to 125 BLM21BD151SN1 150 ±25% 200 0.25 -55 to 125 BLM21BB201SN1 200 ±25% 200 0.35 -55 to 125 BLM21BB221SN1 220 ±25% 200 0.35 -55 to 125 BLM21BD221SN1 220 ±25% 200 0.25 -55 to 125 BLM21BB331SN1 330 ±25% 200 0.40 -55 to 125 BLM21BD331SN1 330 ±25% 200 0.30 -55 to 125 BLM21BD421SN1 420 ±25% 200 0.30 -55 to 125 BLM21BB471SN1 470 ±25% 200 0.45 -55 to 125 BLM21BD471SN1 470 ±25% 200 0.35 -55 to 125 BLM21BD601SN1 600 ±25% 200 0.35 -55 to 125 BLM21BD751SN1 750 ±25% 200 0.40 -55 to 125 BLM21BD102SN1 1000 ±25% 200 0.40 -55 to 125 BLM21BD152SN1 1500 ±25% 200 0.45 -55 to 125 BLM21BD182SN1 1800 ±25% 200 0.50 -55 to 125 BLM21BD222TN1 2200 ±25% 200 0.60 -55 to 125 BLM21BD222SN1 2250 (Typ.) 200 0.60 -55 to 125 BLM21BD272SN1 2700 ±25% 200 0.80 -55 to 125 Part Number ■ Impedance-Frequency (Typical) BLM21BB Series BLM21BD Series 3200 2000 BLM21BD272SN1 2400 1500 BLM21BB201SN1 BLM21BB221SN1 1000 BLM21BB151SN1 BLM21BB750SN1 BLM21BB121SN1 Impedance (Ω) Impedance (Ω) BLM21BB471SN1 BLM21BB331SN1 1600 BLM21BD471SN1 BLM21BD421SN1 BLM21BD331SN1 BLM21BD221SN1 BLM21BB600SN1 800 500 BLM21BD222SN1 BLM21BD222TN1 BLM21BD182SN1 BLM21BD152SN1 BLM21BD102SN1 BLM21BD751SN1 BLM21BD601SN1 BLM21BD151SN1 BLM21BD121SN1 BLM21BB050SN1 0 0 1 10 100 Frequency (MHz) 1000 1 10 100 1000 Frequency (MHz) Continued on the following page. 36 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. ■ Impedance-Frequency Characteristics BLM21BB050SN1 BLM21BB600SN1 40 400 30 300 Impedance (Ω) Impedance (Ω) Z 20 Z R 200 1 X X 10 100 R 0 0 1 10 100 1000 1 10 Frequency (MHz) BLM21BB750SN1 1000 BLM21BB121SN1 400 600 300 450 Impedance (Ω) Z Impedance (Ω) 100 Frequency (MHz) R 200 X 100 Z 300 R 150 X 0 1 10 100 0 1000 1 10 Frequency (MHz) 1000 BLM21BB151SN1 400 800 300 600 Z Impedance (Ω) Impedance (Ω) BLM21BD121SN1 Z 200 R R 400 X 100 200 X 0 1 10 100 0 1000 1 10 Frequency (MHz) 1000 BLM21BB201SN1 1200 300 900 Impedance (Ω) 400 Z R 200 100 Frequency (MHz) BLM21BD151SN1 Impedance (Ω) 100 Frequency (MHz) Z 600 R 300 X X 100 0 1 10 100 Frequency (MHz) 1000 0 1 10 100 1000 Frequency (MHz) Continued on the following page. 37 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. ■ Impedance-Frequency Characteristics BLM21BB221SN1 BLM21BD221SN1 600 1000 Z 750 450 1 Impedance (Ω) Impedance (Ω) R 500 X Z R 300 X 150 250 0 0 1 10 100 1 1000 10 BLM21BB331SN1 1000 BLM21BD331SN1 800 1200 Z 600 Impedance (Ω) 900 Impedance (Ω) 100 Frequency (MHz) Frequency (MHz) R 600 X Z R 400 X 200 300 0 0 1 10 100 1 1000 10 100 1000 Frequency (MHz) Frequency (MHz) BLM21BD421SN1 BLM21BB471SN1 1000 2000 750 1500 Z Impedance (Ω) Impedance (Ω) Z R 500 R 1000 X X 500 250 0 0 1 10 100 1 1000 10 BLM21BD471SN1 1000 BLM21BD601SN1 1200 1200 900 Z 900 Impedance (Ω) Z Impedance (Ω) 100 Frequency (MHz) Frequency (MHz) R 600 R 600 X X 300 300 0 1 10 100 Frequency (MHz) 1000 0 1 10 100 1000 Frequency (MHz) Continued on the following page. 38 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. ■ Impedance-Frequency Characteristics BLM21BD751SN1 BLM21BD102SN1 1600 2000 1200 1500 Z Impedance (Ω) Impedance (Ω) Z R 800 R 1000 1 X X 400 500 0 1 10 100 0 1000 1 10 100 Frequency (MHz) 1000 Frequency (MHz) BLM21BD152SN1 BLM21BD182SN1 2400 2400 Z Z 1800 R R Impedance (Ω) Impedance (Ω) 1800 1200 1200 X X 600 600 0 0 1 10 100 1 1000 10 100 1000 Frequency (MHz) Frequency (MHz) BLM21BD222TN1 BLM21BD222SN1 3200 2400 Z 2400 1800 Z Impedance (Ω) Impedance (Ω) R 1200 X R 1600 X 800 600 0 0 1 10 100 1000 1 10 100 1000 Frequency (MHz) Frequency (MHz) BLM21BD272SN1 3200 2400 Impedance (Ω) Z R 1600 X 800 0 1 10 100 1000 Frequency (MHz) 39 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. BLM31B Series (1206 Size) 1.1±0.2 0.7±0.3 1 3.2±0.2 1.6±0.2 in mm BLM31B Series Part Number Impedance (at 100MHz, 20 degree C) (ohm) Rated Current (mA) DC Resistance (max.) (ohm) Operating Temperature Range (°C) 600 ±25% 300 0.35 -55 to 125 BLM31BE601FN1 ■ Impedance-Frequency (Typical) BLM31B Series 800 Impedance (ohm) 600 BLM31BE601FN1 400 200 0 1 10 100 1000 Frequency (MHz) ■ Impedance-Frequency Characteristics BLM31BE601FN1 800 Z 600 Impedance (Ω) R 400 200 X 0 1 10 100 Frequency (MHz) 40 1000 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. ■ Features (BLM_R Series) The chip ferrite bead BLM series comprises ferrite beads in the shape of a chip. This ferrite bead generates a high impedance which at high frequencies mainly consists of a resistance element. The BLM series is effective in circuits without stable ground lines because the BLM series does not need a connection to ground. The nickel barrier structure of the external electrodes provides excellent solder heat resistance. The BLM_R series can be used in a digital interface. Resistance of BLM_R series especiallly grows in the lower frequency range. Therefore BLM_R series is less effective for digital signal waveform at low frequency range and can suppress the ringing. ■ Equivalent Circuit 1 (Resistance element becomes dominant at high frequencies.) BLM18R Series (0603 Size) 0.8±0.15 0.4±0.2 1.6±0.15 0.8±0.15 BLM18R Series (in mm) Impedance (at 100MHz, 20 degree C) (ohm) Rated Current (mA) DC Resistance (max.) (ohm) Operating Temperature Range (°C) BLM18RK121SN1 120 ±25% 200 0.25 -55 to 125 BLM18RK221SN1 220 ±25% 200 0.30 -55 to 125 BLM18RK471SN1 470 ±25% 200 0.50 -55 to 125 BLM18RK601SN1 600 ±25% 200 0.60 -55 to 125 BLM18RK102SN1 1000 ±25% 200 0.80 -55 to 125 Part Number ■ Impedance-Frequency (Typical) BLM18R Series 1200 BLM18RK601SN1 Impedance (Ω) 900 BLM18RK102SN1 BLM18RK471SN1 BLM18RK221SN1 BLM18RK121SN1 600 300 0 1 10 100 1000 Frequency (MHz) 41 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. ■ Impedance-Frequency Characteristics 1 BLM18RK221SN1 400 150 300 Impedance (Ω) Impedance (Ω) BLM18RK121SN1 200 Z R 100 Z R 200 100 50 X X 0 0 1 10 100 1 1000 10 100 1000 Frequency (MHz) Frequency (MHz) BLM18RK471SN1 BLM18RK601SN1 600 1000 Z 450 750 Z Impedance (Ω) Impedance (Ω) R 300 150 R 500 250 X X 0 1 10 100 1000 Frequency (MHz) BLM18RK102SN1 Z 900 Impedance (Ω) R 600 X 300 0 10 100 Frequency (MHz) 42 1 10 100 Frequency (MHz) 1200 1 0 1000 1000 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. BLM21R Series (0805 Size) 0.85±0.2 0.5±0.2 1 1.25±0.2 2.0±0.2 EIA CODE : 0805 BLM21R Series (in mm) Impedance (at 100MHz, 20 degree C) (ohm) Rated Current (mA) DC Resistance (max.) (ohm) Operating Temperature Range (°C) BLM21RK121SN1 120 ±25% 200 0.15 -55 to 125 BLM21RK221SN1 220 ±25% 200 0.20 -55 to 125 BLM21RK471SN1 470 ±25% 200 0.25 -55 to 125 BLM21RK601SN1 600 ±25% 200 0.30 -55 to 125 BLM21RK102SN1 1000 ±25% 200 0.50 -55 to 125 Part Number ■ Impedance-Frequency (Typical) BLM21R Series 1200 BLM21RK601SN1 Impedance (Ω) 900 BLM21RK102SN1 BLM21RK471SN1 BLM21RK221SN1 BLM21RK121SN1 600 300 0 1 10 100 1000 Frequency (MHz) ■ Impedance-Frequency Characteristics BLM21RK121SN1 BLM21RK221SN1 200 300 150 225 Z R Impedance (Ω) Impedance (Ω) Z R 100 50 150 75 X X 0 1 10 100 Frequency (MHz) 1000 0 1 10 100 1000 Frequency (MHz) Continued on the following page. 43 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. ■ Impedance-Frequency Characteristics BLM21RK471SN1 BLM21RK601SN1 1000 600 Z 750 1 R Impedance (Ω) Impedance (Ω) 450 300 X 150 X 0 1 10 100 1000 BLM21RK102SN1 1200 900 Impedance (Ω) Z R 600 X 300 0 10 100 Frequency (MHz) 1 10 100 Frequency (MHz) Frequency (MHz) 44 R 250 0 1 Z 500 1000 1000 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. ■ Features (BLM_P Series) ■ Equivalent Circuit The chip ferrite bead BLM series comprises ferrite beads in the shape of a chip. This ferrite bead generates a high impedance which at high frequencies mainly consists of a resistance element. The BLM series is effective in circuits without stable ground lines because the BLM series does not need a connection to ground. The nickel barrier structure of the external electrodes provides excellent solder heat resistance. The BLM_P series can be used in high current circuits due to its low DC resistance. It can match power lines to a maximum of 6A DC (BLM41P). 1 (Resistance element becomes dominant at high frequencies.) BLM18P Series (0603 Size) 0.8±0.15 0.4±0.2 1.6±0.15 0.8±0.15 BLM18P Series Impedance (at 100MHz, 20 degree C) (ohm) Rated Current (mA) BLM18PG300SN1 30 (Typ.) BLM18PG330SN1 33 ±25% Part Number (in mm) DC Resistance (max.) (ohm) Operating Temperature Range (°C) 1000 0.05 -55 to 125 3000 0.025 -55 to 125 BLM18PG600SN1 60 (Typ.) 500 0.10 -55 to 125 BLM18PG121SN1 120 ±25% 2000 0.05 -55 to 125 BLM18PG181SN1 180 ±25% 1500 0.09 -55 to 125 At rated current upper than 1500mA, derating is required. Please refer P. 51, "Derating of Rated Current". ■ Impedance-Frequency (Typical) BLM18P Series 300 240 Impedance (Ω) BLM18PG181SN1 180 BLM18PG121SN1 120 BLM18PG600SN1 60 BLM18PG330SN1 BLM18PG300SN1 0 1 10 100 1000 Frequency (MHz) 45 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. ■ Impedance-Frequency Characteristics BLM18PG300SN1 BLM18PG330SN1 80 60 1 45 Impedance (Ω) Impedance (Ω) 60 40 Z Z 30 R R 15 20 X X 0 0 1 10 100 1000 1 10 100 1000 Frequency (MHz) Frequency (MHz) BLM18PG600SN1 BLM18PG121SN1 100 200 75 150 Z Impedance (Ω) Impedance (Ω) Z R 50 X 25 R 100 50 X 0 0 1 10 100 1000 BLM18PG181SN1 280 210 Impedance (Ω) Z R 140 70 X 0 1 10 100 Frequency (MHz) 46 1 10 100 Frequency (MHz) Frequency (MHz) 1000 1000 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. BLM21P Series (0805 Size) 0.85±0.2 0.5±0.2 1 1.25±0.2 2.0±0.2 EIA CODE : 0805 BLM21P Series (in mm) Impedance (at 100MHz, 20 degree C) (ohm) Rated Current (mA) DC Resistance (max.) (ohm) Operating Temperature Range (°C) 22 ±25% 6000 0.01 -55 to 125 BLM21PG300SN1 30 (Typ.) 3000 0.015 -55 to 125 BLM21PG600SN1 60 ±25% 3000 0.025 -55 to 125 BLM21PG221SN1 220 ±25% 2000 0.050 -55 to 125 BLM21PG331SN1 330 ±25% 1500 0.09 -55 to 125 Part Number BLM21PG220SN1 At rated current upper than 1500mA, derating is required. Please refer P. 51, "Derating of Rated Current". ■ Impedance-Frequency (Typical) BLM21P Series 600 BLM21PG331SN1 Impedance (Ω) 450 BLM21PG221SN1 BLM21PG600SN1 300 BLM21PG300SN1 BLM21PG220SN1 150 0 1 10 100 1000 Frequency (MHz) ■ Impedance-Frequency Characteristics BLM21PG220SN1 BLM21PG300SN1 40 60 30 45 Impedance (Ω) Impedance (Ω) Z R 20 Z 30 R X 10 X 15 0 1 10 100 Frequency (MHz) 1000 0 1 10 100 1000 Frequency (MHz) Continued on the following page. 47 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. ■ Impedance-Frequency Characteristics 1 BLM21PG221SN1 400 90 300 Impedance (Ω) Impedance (Ω) BLM21PG600SN1 120 Z 60 R Z 200 R 100 30 X X 0 0 1 10 100 1 1000 10 100 1000 Frequency (MHz) Frequency (MHz) BLM21PG331SN1 600 Impedance (Ω) 450 Z R 300 150 X 0 1 10 100 1000 Frequency (MHz) BLM31P Series (1206 Size) 1.1±0.2 0.7±0.3 3.2±0.2 1.6±0.2 in mm BLM31P Series Impedance (at 100MHz, 20 degree C) (ohm) Rated Current (mA) DC Resistance (max.) (ohm) Operating Temperature Range (°C) BLM31PG330SN1 33 ±25% BLM31PG500SN1 50 (Typ.) 6000 0.01 -55 to 125 3000 0.025 BLM31PG121SN1 -55 to 125 120 ±25% 3000 0.025 -55 to 125 BLM31PG391SN1 390 ±25% 2000 0.05 -55 to 125 BLM31PG601SN1 600 ±25% 1500 0.09 -55 to 125 Part Number At rated current upper than 1500mA, derating is required. Please refer P. 51, "Derating of Rated Current". 48 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. ■ Impedance-Frequency (Typical) BLM31P Series 700 600 BLM31PG601SN1 Impedance (ohm) 500 BLM31PG391SN1 400 BLM31PG121SN1 1 300 BLM31PG500SN1 200 BLM31PG330SN1 100 0 1 10 100 1000 Frequency (MHz) ■ Impedance-Frequency Characteristics BLM31PG330SN1 BLM31PG500SN1 60 80 45 60 Z Impedance (Ω) Impedance (Ω) Z R 30 X 15 R 40 X 20 0 0 1 10 100 1 1000 10 BLM31PG121SN1 1000 BLM31PG391SN1 200 600 150 450 Z Impedance (Ω) Impedance (Ω) 100 Frequency (MHz) Frequency (MHz) R 100 50 Z R 300 150 X X 0 0 1 10 100 1000 Frequency (MHz) 1 10 100 1000 Frequency (MHz) BLM31PG601SN1 800 600 Impedance (Ω) Z R 400 X 200 0 1 10 100 1000 Frequency (MHz) 49 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. BLM41P Series (1806 Size) 1.6±0.2 0.7±0.3 1 4.5±0.2 1.6±0.2 BLM41P Series (in mm) Impedance (at 100MHz, 20 degree C) (ohm) Rated Current (mA) DC Resistance (max.) (ohm) Operating Temperature Range (°C) BLM41PG600SN1 60 (Typ.) 6000 0.01 -55 to 125 BLM41PG750SN1 75 (Typ.) 3000 0.025 -55 to 125 BLM41PF800SN1 80 (Typ.) 1000 0.10 -55 to 125 BLM41PG181SN1 180 ±25% 3000 0.025 -55 to 125 BLM41PG471SN1 470 ±25% 2000 0.05 -55 to 125 BLM41PG102SN1 1000 ±25% 1500 0.09 -55 to 125 Part Number At rated current upper than 1500mA, derating is required. Please refer P. 51, "Derating of Rated Current". ■ Impedance-Frequency (Typical) BLM41P Series (80-180ohm) BLM41P Series (470-1000ohm) 1200 200 BLM41AF151SN1 900 BLM41PG102SN Impedance (Ω) Impedance (ohm) 150 BLM41AF800SN1 100 600 BLM41PG471SN 300 50 0 0 1 10 100 1 1000 10 Frequency (MHz) 100 1000 Frequency (MHz) ■ Impedance-Frequency Characteristics BLM41PG600SN1 BLM41PG750SN1 100 100 75 75 Z R Impedance (Ω) Impedance (Ω) Z R 50 X 25 50 X 25 0 0 1 10 100 Frequency (MHz) 1000 1 10 100 1000 Frequency (MHz) Continued on the following page. 50 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. ■ Impedance-Frequency Characteristics BLM41PF800SN1 BLM41PG181SN1 400 100 Z 300 R Impedance (Ω) Impedance (Ω) 75 50 200 1 Z X R 100 25 X 0 0 1 10 100 1 1000 10 BLM41PG471SN1 1000 BLM41PG102SN1 600 1200 450 900 Z Z Impedance (Ω) Impedance (Ω) 100 Frequency (MHz) Frequency (MHz) R 300 R 600 X X 150 300 0 1 10 100 0 1000 1 Frequency (MHz) 10 100 1000 Frequency (MHz) ■ Notice (Rating) [Derating] 6 Derated Current [A] In operating temperatures exceeding +85D, derating of current is necessary for chip Ferrite Beads for which rated current is 1.5A or over. Please apply the derating curve shown below according to the operating temperature. 6A 5 4 3 2 1 3A 2A 1.5A 1A 0 85 125 Operating Temperature [D] 51 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. EMI Suppression Effect Noise Suppression Effect of BLM_R Series !Waveform Distortion Suppressing Performance of BLM--R Series [Measuring Circuits] Measuring Point AC04 1 1MHz AC00 Filter Pattern 20cm EMI Suppression Effect / Description Type of Filter Signal waveform (100nsec/div, 2V/div) Expand (10nsec/div, 2V/div) Spectrum 85 Level [dB µV] 80 Initial (No filter) 75 70 65 60 55 50 45 30 50 100 150 200 250 Frequency [MHz] 300 150 200 250 Frequency [MHz] 300 150 200 250 Frequency [MHz] 300 Ringing is caused on the signal waveform. Such ringing contains several hundred MHz harmonic components and generates noise. Signal waveform (100nsec/div, 2V/div) Expand (10nsec/div, 2V/div) Spectrum 85 Level [dB µV] 80 Resister (47Ω) is used 75 70 65 60 55 50 45 30 50 100 Comparing initial waveform, ringing is suppressed a little. However there still remains high level waveform distortion. Signal waveform (100nsec/div, 2V/div) Expand (10nsec/div, 2V/div) Spectrum 85 BLM18RK221SN1 (220Ω at 100MHz) is used Level [dB µV] 80 75 70 65 60 55 50 45 30 50 100 BLM18R has excellent performance for noise suppression and waveform distortion suppression. BLM18R suppresses drastically not only spectrum level in more than 100MHz range but waveform distortion. 52 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please C31E9.pdf 03.3.12 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. On-Board Type (DC) EMI Suppression Filters (EMIFILr) GHz Noise Suppression Chip Ferrite Beads BLM18H/BLM18E Series BLM18H/BLM18E series has a modified internal electrode structure, that minimizes stray capacitance and increases the effective frequency range. 1 ■ Equivalent Circuit ■ Features (BLM18H series) 1. BLM18H series is realized high impedance at 1GHz and suitable for noise suppression from 500MHz to GHz range. The impedance value of HG/HD-type is about three times as large as that of A/B-type at 1GHz, though the impedance characteristic of HG/HD-type is similar to A-type at 100MHz or less. 2. HG-type is effective in noise suppression in wide frequency range (several MHz to several GHz). HB/HD-type for high-speed signal line provides a sharper roll-off after the cut off frequency. HK-type for digital interface is effective in suppressing the ringing because resistance especially grows in the lower frequency. 3. The magnetic shielded structure minimizes crosstalk. (Resistance element becomes dominant at high frequencies.) ■ Features (BLM18E series) 1. Low DC Resistance and a large Rated Current are suitable for noise suppression of the driver circuit. 2. Excellent direct current characteristics 3. Thin type (t=0.5mm) is suitable for small and low profile equipment such as DSC, cellular phones. 53 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. BLM18H Series (0603 Size) 0.8±0.15 0.4±0.2 1 1.6±0.15 0.8±0.15 BLM18H Series (in mm) Part Number Impedance (at 100MHz, 20 degree C) (ohm) Impedance (at 1GHz, 25 degree C) (ohm) Rated Current (mA) DC Resistance (max.) (ohm) Operating Temperature Range (°C) BLM18HG471SN1 470 ±25% 600 (Typ.) 200 0.85 -55 to 125 BLM18HG601SN1 600 ±25% 700 (Typ.) 200 1.00 -55 to 125 BLM18HG102SN1 1000 ±25% 1000 (Typ.) 100 1.60 -55 to 125 BLM18HB121SN1 120 ±25% 500 ±40% 200 0.50 -55 to 125 BLM18HB221SN1 220 ±25% 1100 ±40% 100 0.80 -55 to 125 BLM18HB331SN1 330 ±25% 1600 ±40% 50 1.20 -55 to 125 BLM18HD471SN1 470 ±25% 1000 (Typ.) 100 1.20 -55 to 125 BLM18HD601SN1 600 ±25% 1200 (Typ.) 100 1.50 -55 to 125 BLM18HD102SN1 1000 ±25% 1700 (Typ.) 50 1.80 -55 to 125 BLM18HK331SN1 330 ±25% 400 ±40% 200 0.50 -55 to 125 BLM18HK471SN1 470 ±25% 600 ±40% 200 0.70 -55 to 125 BLM18HK601SN1 600 ±25% 700 ±40% 100 0.90 -55 to 125 BLM18HK102SN1 1000 ±25% 1200 ±40% 50 1.50 -55 to 125 ■ Impedance-Frequency (Typical) BLM18HG Series BLM18HB Series 1600 2000 BLM18HB331SN1 1200 BLM18HG102SN1 Impedance (ohm) Impedance (Ω) 1500 BLM18HG601SN1 1000 BLM18HG471SN1 BLM18HB221SN1 800 BLM18HB121SN1 400 500 0 0 1 10 100 Frequency (MHz) 1000 2000 1 10 100 1000 2000 Frequency (MHz) Continued on the following page. 54 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. ■ Impedance-Frequency (Typical) BLM18HD Series BLM18HK Series 1600 4000 Impedance (Ω) Impedance (Ω) BLM18HK102SN1 1200 3000 BLM18HD102SN1 2000 BLM18HD601SN1 800 1 10 1 BLM18HK331SN1 0 0 BLM18HK471SN1 400 BLM18HD471SN1 1000 BLM18HK601SN1 1000 2000 100 1 10 Frequency (MHz) 1000 2000 100 Frequency (MHz) ■ Impedance-Frequency Characteristics BLM18HG471SN1 BLM18HG601SN1 1000 800 750 Z Z Impedance (Ω) Impedance (Ω) 600 R 400 R 500 X X 250 200 0 0 1 10 1000 100 1 2000 10 1000 100 2000 Frequency (MHz) Frequency (MHz) BLM18HG102SN1 BLM18HB121SN1 2000 700 600 500 Impedance (ohm) Impedance (Ω) 1500 Z 1000 R Z 400 R 300 200 500 X X 100 0 0 1 10 1000 100 2000 1 10 BLM18HB221SN1 1000 2000 BLM18HB331SN1 1000 1600 750 1200 Impedance (ohm) Impedance (ohm) 100 Frequency (MHz) Frequency (MHz) Z R 500 250 Z R 800 400 X X 0 1 10 100 Frequency (MHz) 1000 2000 0 1 10 100 1000 2000 Frequency (MHz) Continued on the following page. 55 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. ■ Impedance-Frequency Characteristics 1 BLM18HD601SN1 2000 1500 1500 Z Impedance (Ω) Impedance (Ω) BLM18HD471SN1 2000 Z 1000 R 1000 X 500 500 R X 0 1 10 1000 100 0 2000 1 10 Frequency(MHz) 3000 450 2000 Z 1000 Z R 300 150 X R X 0 10 1000 100 0 2000 1 10 Frequency (MHz) BLM18HK471SN1 BLM18HK601SN1 1000 750 600 Z Impedance (Ω) Z Impedance (Ω) 1000 2000 100 Frequency (MHz) 800 R 400 R 500 250 200 X 0 1 10 X 1000 2000 100 Frequency (MHz) BLM18HK102SN1 1200 Impedance (Ω) Z R 800 400 X 1 10 100 Frequency (MHz) 56 0 1 10 100 Frequency (MHz) 1600 0 2000 BLM18HK331SN1 600 Impedance (Ω) Impedance (Ω) BLM18HD102SN1 4000 1 1000 100 Frequency(MHz) 1000 2000 1000 2000 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. BLM18E Series (0603 Size) 0.8±0.15 T 1.6±0.15 0.4±0.2 1 T BLM18E Series BLM18EGpppTN1 0.5±0.15 BLM18EGpppSN1 0.8±0.15 (in mm) Impedance (at 100MHz, 20 degree C) (ohm) Impedance (at 1GHz, 25 degree C) (ohm) Rated Current (mA) DC Resistance (max.) (ohm) Operating Temperature Range (°C) BLM18EG101TN1 100 ±25% 140 (Typ.) 2000 0.04 -55 to 125 BLM18EG121SN1 120 ±25% 145 (Typ.) 2000 0.03 -55 to 125 BLM18EG391TN1 390 ±25% 520 (Typ.) 500 0.3 -55 to 125 BLM18EG601SN1 600 ±25% 700 (Typ.) 300 0.35 -55 to 125 Part Number At rated current 2000mA, derating is required. Please refer P. 51, "Derating of Rated Current". ■ Impedance-Frequency (Typical) 1000 Impedance (ohm) 800 BLM18EG601SN1 600 BLM18EG391TN1 BLM18EG121SN 400 BLM18EG101TN 200 0 1 10 1000 100 2000 Frequency (MHz) ■ Impedance-Frequency Characteristics BLM18EG101TN1 BLM18EG121SN1 160 200 Z 160 Z Impedance (ohm) Impedance (ohm) 120 R 80 40 120 R 80 X X 40 0 1 10 100 Frequency (MHz) 1000 2000 0 1 10 100 1000 2000 Frequency (MHz) Continued on the following page. 57 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. ■ Impedance-Frequency Characteristics BLM18EG391TN1 BLM18EG601SN1 700 1000 560 1 Impedance (ohm) Impedance (ohm) 750 Z Z 420 R 280 R 500 X 250 140 X 0 0 1 10 100 Frequency (MHz) 58 1000 2000 1 10 100 Frequency (MHz) 1000 2000 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. EMI Suppression Effect Noise Suppression Effect !Noise Suppression in UHF Range [Testing Circuit] 74HCU04 74AC04 Measured radiation at 3m distance 74HC00 1 BLM 10MHz Type of Filter EMI Suppression Effect Description 70 Initial (No filter) Level [dBµV/m] 60 50 40 30 20 10 300 400 500 600 700 800 Frequency [MHz] 900 1000 Current BLM are effective in suppressing noise in the range between 300MHz and 700MHz. 70 Conventional Type BLM18AG102SN1 (1000Ω at 100MHz) Level [dBµV/m] 60 50 Initial 40 30 20 10 300 400 500 600 700 800 Frequency [MHz] 900 1000 In addition to the effectiveness of current BLM, BLM18HG suppresses noise in the range beyond 700MHz. 70 for GHz Noize Suppression BLM18HG102SN1 (1000Ω at 100MHz) Level [dBµV/m] 60 50 Initial 40 BLM18AG102SN1 30 20 10 300 400 500 600 700 800 Frequency [MHz] 900 1000 Comparison between BLM18HG102SN1 and BLM18AG102SN1 (CURRENT ITEM) Impedance [Ω] 2000 BLM18HG102SN1 1500 BLM18AG102SN1 1000 500 0 1 10 100 1000 2000 Frequency [MHz] 59 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. On-Board Type (DC) EMI Suppression Filters (EMIFILr) Chip Ferrite Beads Arrays BLA2AA/BLA2AB/BLA31A/BLA31B Series ■ Features (2) (3) (4) (5) (6) (7) (8) 0.2±0.15 1. BLA2AA/2AB series has 4 circuits in 2.0x1.0mm body with 0.5mm pitch. 2. Provides attenuation across a broad frequency range. Two types of impedance characteristics are available; one is for general signal line and the other is for high speed signal line. 3. Original inner electrode structure enables extra low crosstalk. 4. The nickel barrier structure of the external electrodes provides excellent solder heat resistance. (1) 1.0±0.2 BLA2AA/BLA2AB Series 0.5±0.1 2.0±0.2 0.25±0.15 0.5±0.1 : Electrode (in mm) ■ Applications Notebook size PC, PDA and other compact size digital equipment Impedance (at 100MHz, 20 degree C) (ohm) Rated Current (mA) DC Resistance (max.) (ohm) Operating Temperature Range (°C) BLA2AAG121SN4 120 ±25% 100 0.50 -55 to 125 BLA2AAG221SN4 220 ±25% 50 0.70 -55 to 125 BLA2AAG601SN4 600 ±25% 50 1.10 -55 to 125 BLA2AAG102SN4 1000 ±25% 50 1.30 -55 to 125 BLA2ABB100SN4 10 ±25% 200 0.1 -55 to 125 BLA2ABB220SN4 22 ±25% 200 0.2 -55 to 125 BLA2ABB470SN4 47 ±25% 200 0.35 -55 to 125 BLA2ABB121SN4 120 ±25% 50 0.60 -55 to 125 BLA2ABB221SN4 220 ±25% 50 0.90 -55 to 125 BLA2ABD471SN4 470 ±25% 100 0.65 -55 to 125 BLA2ABD601SN4 600 ±25% 100 0.80 -55 to 125 BLA2ABD102SN4 1000 ±25% 50 1.00 -55 to 125 Part Number Number of Circuits : 4 ■ Equivalent Circuit ■ Impedance-Frequency (Typical) BLA2AA Series 1200 BLA2AAG102SN4 (1) (2) (3) (4) 900 Impedance (ohm) 1 BLA2AAG601SN4 600 BLA2AAG221SN4 300 (5) (6) (7) (8) BLA2AAG121SN4 No polarity. 0 1 10 100 1000 Frequency (MHz) Continued on the following page. 60 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. ■ Impedance-Frequency (Typical) BLA2ABB Series BLA2ABD Series 1000 1600 800 BLA2ABD102SN4 Impedance (ohm) Impedance (ohm) 1200 600 BLA2ABB221SN4 400 BLA2ABD601SN4 800 1 BLA2ABD471SN4 400 200 BLA2ABB121SN4 0 0 1 10 100 1 1000 10 100 1000 Frequency (MHz) Frequency (MHz) ■ Impedance-Frequency Characteristics BLA2AAG221SN4 400 150 300 Z Impedance (ohm) Impedance (ohm) BLA2AAG121SN4 200 Z 100 R R 200 50 100 X X 0 0 1 10 100 1000 1 10 Frequency (MHz) 100 1000 Frequency (MHz) BLA2AAG601SN4 BLA2AAG102SN4 800 1200 Z 600 900 R Impedance (ohm) Impedance (ohm) R 400 Z 600 200 300 X X 0 0 1 10 100 1000 1 10 100 Frequency (MHz) Frequency (MHz) BLA2ABB100SN4 BLA2ABB220SN4 50 1000 100 40 Impedance (ohm) Impedance (ohm) 75 Z 30 X 20 Z 50 X 25 10 R R 0 0 1 10 100 Frequency (MHz) 1000 1 10 100 1000 Frequency (MHz) Continued on the following page. 61 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. ■ Impedance-Frequency Characteristics BLA2ABB470SN4 BLA2ABB121SN4 500 200 1 Impedance (ohm) Impedance (ohm) 400 R Z 100 X Z 300 R 200 X 100 0 1 10 100 0 1000 1 10 100 Frequency (MHz) Frequency (MHz) BLA2ABB221SN4 BLA2ABD471SN4 1000 1000 800 800 Z Impedance (ohm) Impedance (ohm) 600 Z 600 R 400 R 400 200 X X 200 0 0 1 10 100 Frequency (MHz) 1 1000 10 100 1000 Frequency (MHz) BLA2ABD601SN4 BLA2ABD102SN4 1000 1600 Z Z 800 Impedance (ohm) Impedance (ohm) 1200 R 600 400 R 800 X 400 X 200 0 0 1 10 100 Frequency (MHz) 62 1000 1 10 100 Frequency (MHz) 1000 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. (1) (2) (3) (4) (5) (6) (7) (8) ■ Features 0.8±0.1 0.4±0.2 3.2±0.2 1. BLA31A/B has 4 circuits in 3.2x1.6mm body with 0.8mm pitch. 2. Provides attenuation across a broad frequency range. Two types of impedance are available which meet general signal line and high speed signal line. 3. Original inner electrode structure enables extra low crosstalk. 4. The nickel barrier structure of the external electrodes provides excellent solder heat resistance. Both flow and reflow soldering methods can be employed. (in mm) Impedance (at 100MHz, 20 degree C) (ohm) Rated Current (mA) DC Resistance (max.) (ohm) Operating Temperature Range (°C) BLA31AG300SN4 30 ±25% 200 0.10 -55 to 125 BLA31AG600SN4 60 ±25% 200 0.15 -55 to 125 BLA31AG121SN4 120 ±25% 150 0.20 -55 to 125 BLA31AG221SN4 220 ±25% 150 0.25 -55 to 125 BLA31AG601SN4 600 ±25% 100 0.35 -55 to 125 BLA31AG102SN4 1000 ±25% 50 0.45 -55 to 125 BLA31BD121SN4 120 ±25% 150 0.30 -55 to 125 BLA31BD221SN4 220 ±25% 150 0.35 -55 to 125 BLA31BD471SN4 470 ±25% 100 0.40 -55 to 125 BLA31BD601SN4 600 ±25% 100 0.45 -55 to 125 BLA31BD102SN4 1000 ±25% 50 0.55 -55 to 125 Part Number 1 0.8±0.2 0.3±0.2 The miniaturization of electronic equipment requires high performance EMI filters which enable high density mounting. BLA31A/B series consists of 4 circuits of ferrite beads. BLA31A/B is suitable for EMI suppression in smaller digital equipment. 1.6±0.2 BLA31A/BLA31B Series Number of Circuits : 4 ■ Equivalent Circuit (1) (2) (3) (4) (5) (6) (7) (8) No polarity. 63 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. ■ Impedance-Frequency (Typical) BLA31A Series BLA31B Series 1200 2000 BLA31AG600SN4 BLA31AG102SN4 1 1500 BLA31AG601SN4 BLA31AG300SN4 Impedance (Ω) Impedance (Ω) 900 BLA31AG221SN4 600 BLA31AG121SN4 300 BLA31BD102SN4 1000 BLA31BD601SN4 BLA31BD471SN4 BLA31BD221SN4 BLA31BD121SN4 500 0 1 10 100 0 1000 1 10 100 1000 Frequency (MHz) Frequency (MHz) ■ Impedance-Frequency Characteristics BLA31AG300SN4 BLA31AG600SN4 40 80 Z Z 60 R Impedance (Ω) Impedance (Ω) 30 20 R 40 X X 10 20 0 1 10 100 0 1000 1 10 Frequency (MHz) 100 BLA31AG121SN4 BLA31AG221SN4 200 300 150 225 Z Impedance (Ω) Impedance (Ω) Z R 100 R 150 X X 50 75 0 1 10 100 0 1000 1 10 Frequency (MHz) 100 1000 Frequency (MHz) BLA31AG601SN4 BLA31AG102SN4 1200 800 900 600 Z Z Impedance (Ω) Impedance (Ω) 1000 Frequency (MHz) R 400 X X 200 R 600 300 0 0 1 10 100 Frequency (MHz) 1000 1 10 100 1000 Frequency (MHz) Continued on the following page. 64 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. ■ Impedance-Frequency Characteristics BLA31BD121SN4 BLA31BD221SN4 500 300 375 225 Impedance (Ω) Impedance (Ω) Z R 150 X Z R 250 125 75 0 0 1 10 100 1 1000 10 100 1000 Frequency (MHz) Frequency (MHz) BLA31BD471SN4 BLA31BD601SN4 1000 800 750 600 Z Impedance (Ω) Z Impedance (Ω) 1 X R 400 X R 500 X 250 200 0 0 1 10 100 1000 1 10 100 1000 Frequency (MHz) Frequency (MHz) BLA31BD102SN4 2000 Impedance (Ω) 1500 Z 1000 R 500 X 0 1 10 100 1000 Frequency (MHz) 65 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. On-Board Type (DC) EMI Suppression Filters (EMIFILr) Chip EMIFILr Part Numbering Chip EMIFILr Capacitor Type (Global Part Number) NF M 3D CC 102 R 1H q w e r t y u i o 3 L qProduct ID yCharacteristics Product ID NF 2 Code Chip EMI Filters Capacitor Type wStructure Capacitance Change B ±10% F +30/-80% R ±15% Code Structure U -750 ±120ppm/°C M Capacitor Type S +350 to -1000ppm/°C eDimensions (LgW) uRated Voltage Code Dimensions (LgW) EIA Code Rated Voltage 18 1.6g0.8mm 0603 0J 6.3V 21 2.0g1.25mm 0805 1A 10V 3D 3.2g1.25mm 1206 1C 16V 41 4.5g1.6mm 1806 1E 25V rFeatures Code Features CC Capacitor Type for Signal Lines PC Capacitor Type for Large Current 1H 50V 2A 100V iElectrode/Others Code Electrode 3 Sn Plating tCapacitance Expressed by three figures. The unit is in pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. oPackaging 66 Code Packaging L Plastic Taping (ø180mm Reel) B Bulk D Paper Taping (ø180mm Reel) Series NFM3D/NFM41 All series NFM18/NFM21 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Chip EMIFILr Capacitor Array Type (Global Part Number) NF A 31 CC 101 S 1E q w e r t y u i o 4 B qProduct ID yCharacteristics Product ID NF Chip EMI Filters Capacitor Type Code Capacitance Change R ±15% S +350 to -1000ppm/°C wStructure Code Structure A Array Type eDimensions (LgW) Code Dimensions (LgW) 31 3.2g1.6mm rFeatures Code Features CC Capacitor Type for Signal Lines uRated Voltage Code Rated Voltage 1C 16V 1E 25V iNumber of Circuits Code Number of Circuits 4 4 Circuits 2 oPackaging tCapacitance Expressed by three figures. The unit is in pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. Code Packaging B Bulk D Paper Taping (ø180mm Reel) 67 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Chip EMIFILr RC Combined Type (Global Part Number) NF R q w e 21 GD r 470 470 t y 2 L u i qProduct ID yResistance Expressed by three figures. The unit is in ohm (Ω). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. Product ID NF EMIFILr wStructure uElectrode/Others Code Structure Code Electrode R RC Combined Type 2 Sn Plating eDimensions (LgW) 2 iPackaging Code Dimensions (LgW) EIA Code Packaging 21 2.0g1.25mm 0805 L Plastic Taping (ø180mm Reel) B Bulk rFeatures Code Features GD RC Combined Type for Signal Lines tCapacitance Expressed by three figures. The unit is in pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. Chip EMIFILr RC Combined Array Type (Global Part Number) NF A q w e 31 GD r 100 101 4 D t y u i qProduct ID yResistance Product ID NF EMIFILr wStructure Code Structure A Array Type eDimensions (LgW) Code Dimensions (LgW) 31 3.2g1.6mm Expressed by three figures. The unit is in ohm (Ω). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. If there is a decimal point, it is expressed by the capital letter "R". In this case, all figures are significant digits. uNumber of Circuits Code Number of Circuits 4 4 Circuits iPackaging Code rFeatures Code Features GD RC Combined Type for Signal Lines tCapacitance Expressed by three figures. The unit is in pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. If there is a decimal point, it is expressed by the capital letter "R". In this case, all figures are significant digits. 68 Packaging B Bulk D Paper Taping (ø180mm Reel) C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Chip EMIFILr LC Combined Type (Global Part Number) NF W 31 SP q w e r 206 t X 1E 4 L y u i o qProduct ID yCharacteristics (NFL/NFW Series) Product ID NF Chip EMI Filters LC Combined Type wStructure Code Characteristics X Cut off Frequency yCharacteristics (NFE Series) Code Structure Code L Monolithic, LC Combined Type B ±10% W Winding, LC Combined Type C ±20%, ±22% E Block, LC Combined Type D +20/-30%, +22/-33% E +20/-55%, +22/-56% F +30/-80%, +22/-82% eDimensions (LgW) Capacitance Change Dimensions (LgW) EIA R ±15% 18 1.6g0.8mm 0603 U -750 ±120ppm/ ˚C 21 2.0g1.25mm 0805 Z Other 31 3.2g1.6mm 1206 61 6.8g1.6mm 2606 Code uRated Voltage rFeatures Code 2 Features Code Rated Voltage 1A 10V 1C 16V 25V SP π Circuit for Signal Lines 1E ST T Circuit for Signal Lines 1H 50V PT T Circuit for Large Current 2A 100V HT T Circuit for Heavy-duty iElectrode Expressed by a figure. tCut-off Frequency (NFL/NFW Series) Expressed by three figures. The unit is in hertz (Hz). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. Ex.) Series Code Electrode 3 Sn Plating NFL 4 Solder Coating NFW 9 Others NFE tCapacitance (NFE Series) Expressed by three figures. The unit is in pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. oPackaging Code Packaging K Plastic Taping (ø330mm Reel) NFW31/NFE L Plastic Taping (ø180mm Reel) NFW31/NFE B Bulk D Paper Taping (ø180mm Reel) Series NFL18/NFL21/NFE NFL18/NFL21 69 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. On-Board Type (DC) EMI Suppression Filters (EMIFILr) Chip EMIFILr Capacitor Type NFM18C/NFM21C/NFM3DC/NFM41C Series NFM18C Series The NFM18CC series is a 1.6x0.8mm EMI suppression filter for signal lines which has a 3-terminal structure using Murata's multilayer technology. ■ Features 0.8±0.1 0.2 min. 1.6±0.1 1. Ultra small size in 1.6x0.8x0.6mm enable high density mounting. 2. 3-terminal structure with low residual inductance (ESL)* characteristics achieves large insertion loss characteristics even in high frequency area. 3. The NFM18cc series covers capacitance range from 22 to 22000pF. (1) (3) NFM18C (2) 0.8±0.1 (2) 0.2±0.1 (in mm) ■ Applications 1. EMI suppression of circuit for insertion loss in quantity. 2. Noise suppression up to GHz. * Not exceeding one-tenth of monolithic ceramic capacitors (2-terminal). Capacitance (pF) Rated Voltage (Vdc) Rated Current (mA) Insulation Resistance (M ohm) Operating Temperature Range (°C) NFM18CC220U1C3 22 +20%,-20% 16 300 1000 min. -55 to 125 NFM18CC470U1C3 47 +20%,-20% 16 300 1000 min. -55 to 125 NFM18CC101R1C3 100 +20%,-20% 16 300 1000 min. -55 to 125 NFM18CC221R1C3 220 +20%,-20% 16 300 1000 min. -55 to 125 NFM18CC471R1C3 470 +20%,-20% 16 300 1000 min. -55 to 125 NFM18CC102R1C3 1000 +20%,-20% 16 300 1000 min. -55 to 125 NFM18CC222R1C3 2200 +20%,-20% 16 300 1000 min. -55 to 125 NFM18CC223R1C3 22000 +20%,-20% 16 1000 1000 min. -55 to 125 Part Number ■ Equivalent Circuit ■ Insertion Loss Characteristics (Typical) (50Ω - 50Ω) 0 10 20 (1) Input Output (3) * no polarity. GND (2) Insertion Loss (dB) 2 0.4±0.1 0.6±0.1 0.25±0.1 NFM18CC223R1C3 NFM18CC222R1C3 30 NFM18CC102R1C3 NFM18CC471R1C3 NFM18CC221R1C3 40 50 NFM18CC101R1C3 NFM18CC470U1C3 60 NFM18CC220U1C3 70 80 0 70 1 10 Frequency (MHz) 100 1000 2000 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. NFM21C Series 0.3±0.2 0.85±0.1 The chip "EMIFIL" NFM21C series is a chip type 3-terminal EMI suppression filter. It can reduce residual inductance to an extremely low level making it excellent for noise suppression at high frequencies. 0.6±0.2 2.0±0.2 ■ Features 1.25±0.1 (2) 1. Small and low profile of 2.0x1.25x0.85mm (NFM21C) enables high density mounting. 2. 3-terminal structure enables high performance in high frequency range. 3. Uses original electrode structure which realizes excellent solderability. 4. An electrostatic capacitance range of 22 to 22000pF enables suppression of noise at specific frequencies. (1) +0.2 0.2 -0.1 NFM21C (3) (2) (in mm) 2 ■ Applications 1. PCs and peripherals which emit high amount of noise 2. Compact size equipment such as PDA, PC card and mobile telecommunications equipment 3. Severe EMI suppression and high impedance circuits such as digital circuits Capacitance (pF) Rated Voltage (Vdc) Rated Current (mA) Insulation Resistance (M ohm) Operating Temperature Range (°C) NFM21CC220U1H3 22 +20%,-20% 50 300 1000 min. -55 to 125 NFM21CC470U1H3 47 +20%,-20% 50 300 1000 min. -55 to 125 NFM21CC101U1H3 100 +20%,-20% 50 300 1000 min. -55 to 125 NFM21CC221R1H3 220 +20%,-20% 50 300 1000 min. -55 to 125 NFM21CC471R1H3 470 +20%,-20% 50 300 1000 min. -55 to 125 NFM21CC102R1H3 1000 +20%,-20% 50 300 1000 min. -55 to 125 NFM21CC222R1H3 2200 +20%,-20% 50 300 1000 min. -55 to 125 NFM21CC223R1H3 22000 +20%,-20% 50 2000 1000 min. -55 to 125 Part Number ■ Equivalent Circuit ■ Insertion Loss Characteristics (Typical) (50Ω - 50Ω) 0 (1) Input Output (3) * no polarity. Insertion Loss (dB) 20 NFM21CC220U1H3 40 NFM21CC470U1H3 NFM21CC101U1H3 60 NFM21CC221R1H3 GND (2) NFM21CC471R1H3 80 NFM21CC223R1H3 NFM21CC222R1H3 NFM21CC102R1H3 100 1 5 10 50 100 500 1000 2000 Frequency (MHz) 71 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. NFM3DC Series 0.7±0.2 The chip "EMIFIL" NFM3DC series is a chip type 3-terminal EMI suppression filter. It can reduce residual inductance to an extremely low level making it excellent for noise suppression at high frequencies. 1.1±0.3 3.2±0.2 1.25±0.2 (2) ■ Feature (1) (3) (2) 0.25±0.2 An electrostatic capacitance range of 22 to 22,000pF enables suppression of noise at specific frequencies. NFM3DC 0.3±0.2 (in mm) ■ Application 1. High noise radiation and high impedance circuits such as digital circuits 2 Capacitance (pF) Rated Voltage (Vdc) Rated Current (mA) Insulation Resistance (M ohm) Operating Temperature Range (°C) NFM3DCC220U1H3 22 +50%,-20% 50 300 1000 min. -55 to 125 NFM3DCC470U1H3 47 +50%,-20% 50 300 1000 min. -55 to 125 NFM3DCC101U1H3 100 +50%,-20% 50 300 1000 min. -55 to 125 NFM3DCC221R1H3 220 +50%,-20% 50 300 1000 min. -55 to 125 NFM3DCC471R1H3 470 +50%,-20% 50 300 1000 min. -55 to 125 NFM3DCC102R1H3 1000 +50%,-20% 50 300 1000 min. -55 to 125 NFM3DCC222R1H3 2200 +50%,-20% 50 300 1000 min. -55 to 125 NFM3DCC223R1H3 22000 +50%,-20% 50 300 1000 min. -55 to 125 Part Number ■ Equivalent Circuit ■ Insertion Loss Characteristics (Typical) (50Ω - 50Ω) 0 (1) Input Output (3) * no polarity. Insertion Loss (dB) 20 NFM3DCC223R1H3 40 NFM3DCC222R1H3 NFM3DCC102R1H3 NFM3DCC471R1H3 60 NFM3DCC221R1H3 GND NFM3DCC101UH3 (2) NFM3DCC470U1H3 80 NFM3DCC220U1H3 100 1 5 10 50 100 Frequency (MHz) 72 500 1000 2000 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. NFM41C Series 1.0±0.2 The chip "EMIFIL" NFM41C series is a chip type 3-terminal EMI suppression filter. It can reduce residual inductance to an extremely low level making it excellent for noise suppression at high frequencies. 1.5±0.3 4.5±0.3 1.6±0.3 (2) ■ Features An electrostatic capacitance range of 22 to 22,000pF enables suppression of noise at specific frequencies. (3) 0.3 +0.3 -0.2 (1) NFM41C ■ Applications (2) 0.4±0.3 (in mm) 1. High noise radiation and high impedance circuits such as digital circuits 2 Capacitance (pF) Rated Voltage (Vdc) Rated Current (mA) Insulation Resistance (M ohm) Operating Temperature Range (°C) NFM41CC220U2A3 22 +50%,-20% 100 300 10000 min. -55 to 125 NFM41CC470U2A3 47 +50%,-20% 100 300 10000 min. -55 to 125 NFM41CC101U2A3 100 +50%,-20% 100 300 10000 min. -55 to 125 NFM41CC221U2A3 220 +50%,-20% 100 300 10000 min. -55 to 125 NFM41CC471R2A3 470 +50%,-20% 100 300 10000 min. -55 to 125 NFM41CC102R2A3 1000 +50%,-20% 100 300 10000 min. -55 to 125 NFM41CC222R2A3 2200 +50%,-20% 100 300 10000 min. -55 to 125 NFM41CC223R2A3 22000 +50%,-20% 100 300 10000 min. -55 to 125 Part Number ■ Equivalent Circuit ■ Insertion Loss Characteristics (Typical) (50Ω - 50Ω) 0 (1) Input Output (3) * no polarity. Insertion Loss (dB) 20 NFM41CC223R2A3 40 NFM41CC222R2A3 NFM41CC102R2A3 60 NFM41CC471R2A3 NFM41CC221U2A3 GND (2) NFM41CC101U2A3 80 NFM41CC470U2A3 NFM41CC220U2A3 100 1 5 10 50 100 500 1000 2000 Frequency (MHz) 73 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. On-Board Type (DC) EMI Suppression Filters (EMIFILr) Chip EMIFILr Capacitor Array Type NFA31C Series The NFA31C series is a chip EMI suppression filter for surface mount applications by using Murata's ceramic processing technology and filter design technology. The series is well suited for EMI suppression in digital I/O lines of varied electronic equipment such as notebook size PCs. 3.2±0.2 0.8±0.1 0.8±0.2 1.6±0.2 0.4±0.2 (7) (8) (9) (10) (3) (4) (5) (1) (2) 0.05 min. (6) 0.05 min. ■ Features 1. High density mounting can be realized because of 4 circuits in one package with 0.8mm pitch. 2. Suitable for high frequency noise suppression because of low residual inductance of 3-terminal structure. 3. Excellent EMI suppression can be realized because of 2-terminal simple GNDs for 4 circuits. 4. 20 to 22,000pF lineups can be used depending on noise frequency. (in mm) ■ Applications 1. Personal computers and peripherals 2. Telephones, PPCs, communications equipment 3. Digital TVs, VCRs Capacitance (pF) Rated Voltage (Vdc) Rated Current (mA) Insulation Resistance (M ohm) Operating Temperature Range (°C) NFA31CC220S1E4 22 +20%,-20% 25 200 1000 min. -40 to 85 NFA31CC470S1E4 47 +20%,-20% 25 200 1000 min. -40 to 85 NFA31CC101S1E4 100 +20%,-20% 25 200 1000 min. -40 to 85 NFA31CC221S1E4 220 +20%,-20% 25 200 1000 min. -40 to 85 NFA31CC471R1E4 470 +20%,-20% 25 200 1000 min. -40 to 85 NFA31CC102R1E4 1000 +20%,-20% 25 200 1000 min. -40 to 85 NFA31CC222R1E4 2200 +20%,-20% 25 200 1000 min. -40 to 85 NFA31CC223R1C4 22000 +20%,-20% 16 200 1000 min. -40 to 85 Part Number Number of Circuits : 4 ■ Equivalent Circuit ■ Insertion Loss Characteristics (Typical) (50Ω - 50Ω) 0 Input (7) (8) (9) NFA31CC470S1E4 NFA31CC220S1E4 (10) 20 GND (1) (2) GND (3) (4) (5) Insertion Loss (dB) 2 1.1±0.5 NFA31CC223R1C4 40 NFA31CC222R1E4 NFA31CC102R1E4 60 NFA31CC471R1E4 NFA31CC221S1E4 (6) NFA31CC101S1E4 80 Output 100 No polarity. 1 5 10 50 100 Frequency (MHz) 74 500 1000 2000 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. On-Board Type (DC) EMI Suppression Filters (EMIFILr) Chip EMIFILr RC Combined Type NFR21G Series (Top View) The NFR21G series comprises high performance EMI suppression filters which can suppress distortion of waveform. Various items may be used, considering circuit impedance and noise condition. 0.5±0.2 1.0 max. 1.0±0.35 0.95±0.35 2.0±0.2 1.25±0.2 ■ Features (2) (Bottom View) 1. Murata's original inner design realizes small and low profile of 2.0x1.25x0.5mm. 2. Distributed constant circuit realizes smooth change of impedance which prevents reflection of signal and distortion of wave shape. 3. The NFR21G series is effective in a line where ground is not stable, because the resistance element in the filter absorbs noise and returns it to ground line. 4. The NFR21G series has no polarity so it can be used in dual direction transport lines. 5. The NFR21G series has various lineups of resistance (22 to 100ohm) and capacitance (10 to 100pF). (1) (3) 0.2 0.3± 0.25 0.2 (2) 0.3± 0.25 2 (in mm) ■ Applications Interface lines and clock lines where signals are tend to be distorted Capacitance (pF) Resistance (ohm) Rated Current (mA) Rated Voltage (Vdc) Insulation Resistance (M ohm) Operating Temperature Range (°C) NFR21GD1002202 10 +20%,-20% 22 +30%,-30% 50 50 1000 min. -40 to 85 NFR21GD1004702 10 +20%,-20% 47 +30%,-30% 35 50 1000 min. -40 to 85 NFR21GD4702202 47 +20%,-20% 22 +30%,-30% 50 50 1000 min. -40 to 85 NFR21GD4704702 47 +20%,-20% 47 +30%,-30% 35 50 1000 min. -40 to 85 NFR21GD4706802 47 +20%,-20% 68 +30%,-30% 30 50 1000 min. -40 to 85 NFR21GD4701012 47 +20%,-20% 100 +30%,-30% 25 50 1000 min. -40 to 85 NFR21GD1012202 100 +20%,-20% 22 +30%,-30% 50 50 1000 min. -40 to 85 NFR21GD1014702 100 +20%,-20% 47 +30%,-30% 35 50 1000 min. -40 to 85 NFR21GD1016802 100 +20%,-20% 68 +30%,-30% 30 50 1000 min. -40 to 85 NFR21GD1011012 100 +20%,-20% 100 +30%,-30% 25 50 1000 min. -40 to 85 Part Number Number of Circuits : 1 75 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. ■ Equivalent Circuit (1) Input Output (3) GND (2) No polarity ■ Insertion Loss Characteristics (Typical) (50Ω - 3kΩ) 0 (50Ω - 150Ω) 0 NFR21GD4701012 10 10 NFR21GD1002202 NFR21GD1004702 NFR21GD4702202 20 Insertion Loss (dB) Insertion Loss (dB) 2 NFR21GD4704702 NFR21GD4706802 NFR21GD1012202 30 NFR21GD1014702 NFR21GD1016802 50 1 10 100 Frequency (MHz) 76 NFR21GD1011012 30 40 40 50 20 1000 1 10 100 Frequency (MHz) 1000 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. EMI Suppression Effect Noise Suppression Effect of NFR21G Series !Effect of Noise Suppression by NFR21G [Testing Circuit] The NFR21G is effective even if ground line is not stable enough due to its distributed constant circuit structure. HCU04 HC04 Filter HC00 15cm Signal Pattern 10MHz With Stable Ground Line EMI Suppression Effect Type of Filter Description Noise Level without Filter Noise Level [dB µ V/m] 60 Filter 50 Ground pattern 30 20 10 30 84 138 192 246 Frequency [MHz] 300 Noise Level [dB µ V/m] 60 Filter Mounting Condition Standard Type Chip EMIFILr (100pF) 40 30 20 84 138 192 246 Frequency [MHz] 300 60 Noise Level [dB µ V/m] Thru-hole (connection ground pattern with ground plane) Whole surface (back side) ground plane The standard type chip EMIFILr is effective on stable ground lines. 50 10 30 Filter Mounting Condition NFR21GD4701012 2 Signal line 40 The NFR21G has some advantages to standard type EMIFILr on stable ground lines. 50 40 30 20 10 30 84 138 192 246 Frequency [MHz] 300 With Poor Ground Line Type of Filter EMI Suppression Effect Description Noise Level without Filter Noise Level [dB µ V/m] 60 Filter 50 Signal line 40 Ground pattern 30 20 10 30 84 138 192 246 Frequency [MHz] 300 Filter Mounting Condition Standard Type Chip EMIFILr (100pF) Noise Level [dB µ V/m] 60 The standard type EMIFILr loses efficiency on poor ground lines. 50 40 30 20 10 30 84 138 192 246 Frequency [MHz] 300 Noise Level [dB µ V/m] 60 Filter Mounting Condition NFR21GD4701012 Without ground plane The NFR21G is effective even on poor ground lines because of its distributed constant circuit structure and unique system to limit rush current. 50 40 30 20 10 30 84 138 192 246 Frequency [MHz] 300 77 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. EMI Suppression Effect Noise Suppression Effect of NFR21G Series !Waveform Distortion Suppressing Function by NFR21G [Testing Circuit] HCU04 AC04 Filter AC04 Measuring Point 10MHz Type of Filter EMI Suppression Effect Voltage Waveform Description Resonance between the internal capacitance of the IC and the inductance of the print pattern causes waveform overshooting and undershooting. 2 Initial Waveform (no filter) ↑ :1V/div → :20ns/div Voltage Waveform Ordinary capacitor filters have no waveform distortion suppressing capability, and they cannot suppress disturbances in the waveforms. When Ordinary Capacitor Filter is Used ↑ :1V/div → :20ns/div Voltage Waveform The waveform distortion suppressing function of the NFR21G minimizes disturbances of waveforms. NFR21G ↑ :1V/div 78 → :20ns/div C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. On-Board Type (DC) EMI Suppression Filters (EMIFILr) Chip EMIFILr RC Combined Array Type NFA31G Series (Top View) (7) (8) NFA31G series is a high performance EMI suppression filter array with a 4-circuit noise filter in 3.2x1.6mm size. NFA31G realizes high density mounting. (9) (10) (1) (2) (3) (4) (5) (6) 1.1±0.5 0.8±0.1 0.4±0.15 0.8±0.2 ■ Features 1. NFA31G is a 4-circuit noise filter in 3.2x1.6mm size with 0.8mm pitch. High density mounting is available. 2. 3-terminal structure enables excellent high frequency performance. 3. Distributed constant circuit realizes smooth change of impedance which prevents reflection of signal and distortion of wave shape. 4. NFA31G series is effective in lines where ground is not stable, because the resistance element in the filter absorbs noise and returns it to ground line. 3.2±0.2 1.6±0.2 (Bottom View) 2 0.05 min. 0.05 min. (in mm) Capacitance (pF) Resistance (ohm) Rated Current (mA) Rated Voltage (Vdc) Insulation Resistance (M ohm) Operating Temperature Range (°C) NFA31GD1006R84 10 +20%,-20% 6.8 +40%,-40% 50 6 1000 min -40 to 85 NFA31GD1004704 10 +20%,-20% 47 +30%,-30% 20 6 1000 min -40 to 85 NFA31GD1001014 10 +20%,-20% 100 +30%,-30% 15 6 1000 min -40 to 85 NFA31GD4706R84 47 +20%,-20% 6.8 +40%,-40% 50 6 1000 min -40 to 85 NFA31GD4704704 47 +20%,-20% 47 +30%,-30% 20 6 1000 min -40 to 85 NFA31GD4701014 47 +20%,-20% 100 +30%,-30% 15 6 1000 min -40 to 85 NFA31GD1016R84 100 +20%,-20% 6.8 +40%,-40% 50 6 1000 min -40 to 85 NFA31GD1014704 100 +20%,-20% 47 +30%,-30% 20 6 1000 min -40 to 85 NFA31GD1011014 100 +20%,-20% 100 +30%,-30% 15 6 1000 min -40 to 85 Part Number Number of Circuits : 4 ■ Equivalent Circuit Input (7) (8) (9) (10) (2)GND (1)GND (3) (4) (5) (6) Output ∗ No polarity 79 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. ■ Insertion Loss Characteristics (50Ω - 50Ω) 0 10 NFA31GD1006R84 Insertion Loss (dB) Insertion Loss (dB) 10 NFA31GD4706R84 20 NFA31GD1016R84 30 10 100 1000 2000 NFA31GD1014704 (50Ω - 50Ω) 0 10 NFA31GD1001014 NFA31GD4701014 20 NFA31GD1011014 30 40 50 1 10 1 10 100 Frequency (MHz) 2 Insertion Loss (dB) NFA31GD4704704 30 50 1 Frequency (MHz) 100 Frequency (MHz) 80 NFA31GD1004704 20 40 40 50 (50Ω - 50Ω) 0 1000 2000 1000 2000 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. On-Board Type (DC) EMI Suppression Filters (EMIFILr) Chip EMIFILr LC Combined Monolithic Type NFL18ST/NFL18SP/NFL21S Series NFL18ST Series Ths NFL18ST series is an EMI suppression filter for high speed signal lines, achieving T-type structure in 1.6x0.8mm size with Murata's multilayer technology. 0.2 min. 0.2 min. (1) (3) (2) 0.25±0.1 ■ Features 0.8±0.1 (2) 0.25±0.1 0.8±0.1 0.4±0.1 1. Ultra-small size in 1.6x0.8x0.8mm 2. Steep insertion loss characteristics realize excellent noise suppression and prevent distortion of signal waveform. 3. By minimizing stray capacitance of inductor, achieves high performance in noise suppression in high frequency range. 4. Five different values of cut-off frequency are available, ranging from 100MHz up to 500MHz. 5. No polarity using the same structure on all the side electrodes. 1.6±0.1 2 (in mm) ■ Applications Noise suppression for video signal lines (RGB lines) and high speed clock lines Part Number Cut-off Frequency (MHz) Capacitance (pF) Inductance (nH) Rated Voltage (Vdc) Rated Current (mA) Insulation Resistance (M ohm) Operating Temperature Range (°C) NFL18ST107X1C3 100 40 +20%,-20% 175 +20%,-20% 16 100 1000 min. -55 to 125 NFL18ST157X1C3 150 32 +20%,-20% 140 +20%,-20% 16 100 1000 min. -55 to 125 NFL18ST207X1C3 200 25 +20%,-20% 110 +20%,-20% 16 150 1000 min. -55 to 125 NFL18ST307X1C3 300 18 +20%,-20% 62 +20%,-20% 16 200 1000 min. -55 to 125 NFL18ST507X1C3 500 10 +20%,-20% 43 +20%,-20% 16 200 1000 min. -55 to 125 Number of Circuits : 1 ■ Equivalent Circuit ■ Insertion Loss Characteristics (Typical) (50Ω - 50Ω) 0 NFL18ST507X1C3 Output (3) GND (2) 20 Insertion Loss (dB) Input (1) NFL18ST307X1C3 NFL18ST207X1C3 NFL18ST157X1C3 40 NFL18ST107X1C3 60 No Polarity 80 1 5 10 50 100 500 1000 5000 Frequency (MHz) 81 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. NFL18SP Series 0.15±0.1 0.8±0.1 The chip "EMIFIL" NFL18SP series is an EMI suppression filter for high speed signal lines, achieving pi-type structure in 0603 size with Murata's multilayer technology. 1.6±0.1 0.2 min. 1. Ultra-small size in 1.6x0.8x0.6 mm 2. Achieves high performance in noise suppression over wide frequency range. 3. Steep insertion loss characteristics realize excellent noise suppression and prevent distortion of signal waveform. 4. Line up 4 items of cut-off frequency range from 150 to 500MHz. 0.4±0.1 0.3±0.1 0.3±0.1 0.15±0.1 0.15±0.1 (in mm) ■ Applications EMI suppression for digital signal line such as RGB and high speed clock lines Part Number Cut-off Frequency (MHz) Capacitance (pF) Inductance (nH) Rated Voltage (Vdc) Rated Current (mA) Insulation Resistance (M ohm) Operating Temperature Range (°C) NFL18SP157X1A3 150 34 +20%,-20% 100 +20%,-20% 10 100 1000 min. -55 to 125 NFL18SP207X1A3 200 24 +20%,-20% 80 +20%,-20% 10 100 1000 min. -55 to 125 NFL18SP307X1A3 300 19 +20%,-20% 60 +20%,-20% 10 100 1000 min. -55 to 125 NFL18SP507X1A3 500 11 +20%,-20% 38 +20%,-20% 10 100 1000 min. -55 to 125 Number of Circuits : 1 ■ Equivalent Circuit ■ Insertion Loss Characteristics (Typical) 50-50Ω 0 NFL18SP157X1A3 10 (1) Input Output (3) GND (2) Insertion Loss (dB) 2 0.6±0.1 ■ Features NFL18SP207X1A3 20 NFL18SP307X1A3 30 NFL18SP507X1A3 40 50 60 No polarity. 70 1 10 100 Frequency (MHz) 82 1000 2000 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. NFL21S Series 0.3±0.2 0.85±0.1 The chip "EMIFIL" NFL21S series is a high performance EMI suppression filter in 2.0x1.25mm size for high speed signal lines by using Murata's processing technology. 0.6±0.2 2.0±0.2 ■ Features (1) 1.25±0.1 (2) 1. Suppresses noise with few effects on the signal itself due to its steep filtering characteristics. 2. Murata's original internal structure design enables excellent noise suppression up to high frequencies. 3. Available in nine different values of cut-off frequency ranging from 20MHz up to 500MHz. (3) 0.05 min. (2) (in mm) 2 ■ Applications Suppression of high magnitude radiated noise generated by high speed digital circuits such as clock and RGB Part Number Cut-off Frequency (MHz) Capacitance (pF) Inductance (nH) Rated Voltage (Vdc) Rated Current (mA) Insulation Resistance (M ohm) Operating Temperature Range (°C) NFL21SP206X1C3 20 240 +20%,-20% 700 +20%,-20% 16 100 1000 min. -55 to 125 NFL21SP506X1C3 50 84 +20%,-20% 305 +20%,-20% 16 150 1000 min. -55 to 125 NFL21SP706X1C3 70 76 +20%,-20% 185 +20%,-20% 16 150 1000 min. -55 to 125 NFL21SP107X1C3 100 44 +20%,-20% 135 +20%,-20% 16 200 1000 min. -55 to 125 NFL21SP157X1C3 150 28 +20%,-20% 128 +20%,-20% 16 200 1000 min. -55 to 125 NFL21SP207X1C3 200 22 +20%,-20% 72 +20%,-20% 16 250 1000 min. -55 to 125 NFL21SP307X1C3 300 19 +10%,-10% 45 +10%,-10% 16 300 1000 min. -55 to 125 NFL21SP407X1C3 400 16 +10%,-10% 34 +10%,-10% 16 300 1000 min. -55 to 125 NFL21SP507X1C3 500 12 +10%,-10% 31 +10%,-10% 16 300 1000 min. -55 to 125 Number of Circuits : 1 ■ Equivalent Circuit ■ Insertion Loss Characteristics (Typical) (50Ω - 50Ω) 0 NFL21SP507X1C3 GND (2) NFL21SP407X1C3 20 Output (3) Insertion Loss (dB) (1) Input NFL21SP307X1C3 NFL21SP207X1C3 NFL21SP157X1C3 40 NFL21SP107X1C3 NFL21SP706X1C3 NFL21SP506X1C3 60 NFL21SP206X1C3 No polarity. 80 1 5 10 50 100 500 1000 2000 Frequency (MHz) 83 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. On-Board Type (DC) EMI Suppression Filters (EMIFILr) Chip EMIFILr LC Combined Winding Type NFW31S Series 1.8±0.2 2.3±0.2 1.6±0.2 3.2±0.3 (1) (3) (2) (1) : Input electrode (2) : Ground electrode (3) : Output electrode ∗No polarity. 0.7±0.3 0.7±0.3 0.65±0.2 (in mm) ■ Features 1. Suppresses signal noise with little or no attenuation of the signal itself. 2. Murata's original internal structure design enables excellent noise suppression up to high frequencies (40dB at 1GHz typ.). 3. The NFW31S series is available in six different values of cut-off frequency ranging from 10MHz up to 500MHz. Nominal Cut-off Attenuation Attenuation Attenuation Attenuation Attenuation Attenuation Attenuation Attenuation Attenuation Attenuation Freq. at 10MHz at 20MHz at 50MHz at 100MHz at 150MHz at 200MHz at 300MHz at 400MHz at 500MHz at 1000MHz (MHz) (dB) (dB) (dB) (dB) (dB) (dB) (dB) (dB) (dB) (dB) Part Number NFW31SP106X1E4 10 6 max. 5 min. 25 min. 25 min. - 25 min. - - 30 min. 30 min. NFW31SP206X1E4 20 - 6 max. 5 min. 25 min. - 25 min. - - 30 min. 30 min. NFW31SP506X1E4 50 - - 6 max. 10 min. - 30 min. - - 30 min. 30 min. NFW31SP107X1E4 100 - - - 6 max. - 5 min. - - 20 min. 30 min. NFW31SP157X1E4 150 - - - - 6 max. - 10 min. 20 min 30 min. 30 min. NFW31SP207X1E4 200 - - - - - 6 max. - - 10 min. 30 min. NFW31SP307X1E4 300 - - - - - - 6 max. - 5 min. 15 min. NFW31SP407X1E4 400 - - - - - - - 6 max. - 10 min. NFW31SP507X1E4 500 - - - - - - - - 6 max. 10 min. Rated Current : 200mA Rated Voltage : 25Vdc Operating Temperature Range : -40°C to 85°C ■ Equivalent Circuit ■ Insertion Loss Characteristics (Typical) (50Ω - 50Ω) 0 (1) Input GND (2) NFW31SP157X1E4 NFW31SP207X1E4 20 Output (3) Insertion Loss (dB) 2 The signal line chip EMI filter NFW31S series consists of high performance EMI suppression filters. They are designed for noise suppression in high speed signal digital circuits in which the signal harmonics are prone to becoming noise sources. These filters achieve a 100dB/dec. (typ.) damping characteristic with Murata's innovative circuit design. This makes these chips effective in applications where the signal and noise frequencies are close to each other. NFW31SP307X1E4 NFW31SP407X1E4 NFW31SP507X1E4 40 NFW31SP106X1E4 NFW31SP206X1E4 NFW31SP506X1E4 60 NFW31SP107X1E4 No polarity. 80 1 5 10 50 100 Frequency (MHz) 84 500 1000 2000 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Noise Suppression Effect of NFW31S Series EMI Suppression Effect !Example of EMI Suppression in an Actual Circuit [Measuring Circuit] 74ALS04 EMI Suppression Filter 74ALS00 Measuring Point 10MHz Type of Filter ( Signal Wave Form 20ns/div 1v/div ) EMI Suppression Effect Description Noise Level [dBµV] 100 Signal Waveform and Noise Spectrum before Filter Mounting 60 40 20 0 ( 2 80 ) Signal Waveform 20ns/div 1V/div 400 100 200 300 Frequency [MHz] 500 Noise Spectrum (10:1 Active Probe) The NFW31S's steep attenuation characteristic means excellent EMI suppression without waveform cornering. NFW31S Series (Cut-off frequency 50MHz) Noise Level [dBµV] 100 80 Level before filter mounting 60 40 20 0 400 100 200 300 Frequency [MHz] 500 3-terminal capacitors suppress signal frequencies as EMI frequencies so the signal waveform is distorted. Conventional Chip Solid type EMI Filter (NFM41CC 470pF) Noise Level [dBµV] 100 80 60 40 20 0 L L C L : Chip Inductor C : Chip Capacitor (270pF) 100 Noise Level [dBµV] Filter Combined with Conventional LCs Level before filter mounting 80 400 100 200 300 Frequency [MHz] 500 Combinations of inductors and capacitors can yield a steep attenuation characteristic, but they require a great deal more mounting space. Moreover, at high frequencies the EMI suppression is less than that obtained by the NFW31S. Level before filter mounting 60 40 20 0 400 100 200 300 Frequency [MHz] 500 85 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. On-Board Type (DC) EMI Suppression Filters (EMIFILr) Chip EMIFILr LC Combined Type for Large Current NFE31P/NFE61P/NFE61H Series NFE31P Series The chip "EMIFIL" NFE31P is a small size T-type circuit EMI suppression filter. 0.7±0.2 1.0±0.2 0.7±0.2 (1) (2) (3) 1. Its large rated current of 6A and low voltage drop due to small DC resistance are suitable for DC power line use. 2. The feedthrough capacitor realizes excellent high frequency characteristics. 3. The structure incorporates built-in ferrite beads which minimize resonance with surrounding circuits. 4. 22 to 22,000pF lineups can be used for signal lines. 1.6±0.2 3.2±0.4 (in mm) Capacitance (pF) Rated Voltage (Vdc) Rated Current (A) Insulation Resistance (M ohm) Operating Temperature Range (°C) NFE31PT220R1E9 22 +30%,-30% 25 6 1000 min. -40 to 85 NFE31PT470C1E9 47 +50%,-20% 25 6 1000 min. -40 to 85 NFE31PT101C1E9 100 +80%,-20% 25 6 1000 min. -40 to 85 NFE31PT221D1E9 220 +50%,-20% 25 6 1000 min. -40 to 85 NFE31PT471F1E9 470 +50%,-20% 25 6 1000 min. -40 to 85 NFE31PT152Z1E9 1500 +50%,-20% 25 6 1000 min. -40 to 85 NFE31PT222Z1E9 2200 +50%,-50% 25 6 1000 min. -40 to 85 Part Number ■ Equivalent Circuit ■ Insertion Loss Characteristics (Typical) (50Ω - 50Ω) 0 NFE31PT220R1E9 NFE31PT470C1E9 10 NFE31PT101C1E9 Input (1) Output (3) GND (2) No polarity. Insertion Loss (dB) 2 1.6±0.2 ■ Features 20 NFE31PT221D1E9 NFE31PT471F1E9 NFE31PT152Z1E9 30 NFE31PT222Z1E9 40 50 1 10 100 Frequency (MHz) 86 1000 2000 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. NFE61P Series The chip "EMIFIL" NFE61P is a T-type circuit EMI suppression filter. 2.6±0.3 0.7±0.2 (1) (2) (3) 1.6±0.3 ■ Feature 0.7±0.2 1. Its large rated current of 2A and low voltage drop due to small DC resistance are suitable for DC power line use. 2. The feedthrough capacitor realizes excellent high frequency characteristics. 3. The structure incorporates built-in ferrite beads which minimize resonance with surrounding circuits. 4. 33 to 4,700pF lineups can be used for signal lines. 6.8±0.5 1.6±0.3 (in mm) 2 Capacitance (pF) Rated Voltage (Vdc) Rated Current (A) Insulation Resistance (M ohm) Operating Temperature Range (°C) NFE61PT330B1H9 33 +30%,-30% 50 2 1000 min. -25 to 85 NFE61PT680B1H9 68 +30%,-30% 50 2 1000 min. -25 to 85 NFE61PT101Z1H9 100 +30%,-30% 50 2 1000 min. -25 to 85 NFE61PT181B1H9 180 +30%,-30% 50 2 1000 min. -25 to 85 NFE61PT361B1H9 360 +20%,-20% 50 2 1000 min. -25 to 85 NFE61PT681B1H9 680 +30%,-30% 50 2 1000 min. -25 to 85 NFE61PT102E1H9 1000 +80%,-20% 50 2 1000 min. -25 to 85 NFE61PT472C1H9 4700 +80%,-20% 50 2 1000 min. -25 to 85 Part Number ■ Equivalent Circuit ■ Insertion Loss Characteristics (Typical) (50Ω - 50Ω) 0 NFE61PT330B1H9 NFE61PT680B1H9 NFE61PT101Z1H9 Input (1) Output (3) Insertion Loss (dB) 10 20 NFE61PT181B1H9 30 NFE61PT361B1H9 NFE61PT681B1H9 40 NFE61PT102E1H9 NFE61PT472C1H9 GND (2) No polarity. 50 60 0.1 1 10 100 1000 Frequency (MHz) 87 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. NFE61H Series 0.7±0.2 2.6±0.3 0.7±0.2 (1) (2) (3) 1.6±0.3 The T-type chip EMI Filter NFE61H series consists of a feedthrough capacitor and ferrite beads. Extending the operating conditions of NFE61P, NFE61H series can be used in an application set under severe operating conditions. 6.8+0.3 -0.5 ■ Features 1. These filters have an extended operating temperature range of -55 to +125 degree C. 2. Its large rated current of 2A and low voltage drop due to small DC resistance are suitable for DC power line use. 3. The feedthrough capacitor realizes excellent high frequency characteristics. 4. The structure incorporates built-in ferrite beads which minimize resonance with surrounding circuits. 5. 33 to 3,300pF lineups can be used for signal lines. (in mm) Capacitance (pF) Rated Voltage (Vdc) Rated Current (A) Insulation Resistance (M ohm) Operating Temperature Range (°C) NFE61HT330U2A9 33 +30%,-30% 100 2 1000 min. -55 to 125 NFE61HT680R2A9 68 +30%,-30% 100 2 1000 min. -55 to 125 NFE61HT101Z2A9 100 +30%,-30% 100 2 1000 min. -55 to 125 NFE61HT181C2A9 180 +30%,-30% 100 2 1000 min. -55 to 125 NFE61HT361C2A9 360 +20%,-20% 100 2 1000 min. -55 to 125 NFE61HT681D2A9 680 +30%,-30% 100 2 1000 min. -55 to 125 NFE61HT102F2A9 1000 +80%,-20% 100 2 1000 min. -55 to 125 NFE61HT332Z2A9 3300 +80%,-20% 100 2 1000 min. -55 to 125 Part Number ■ Equivalent Circuit ■ Insertion Loss Characteristics (Typical) (50Ω - 50Ω) 0 NFE61HT330U2A9 NFE61HT680R2A9 10 Input (1) Output (3) GND (2) No polarity. Insertion Loss (dB) 2 1.6±0.3 NFE61HT101Z2A9 20 NFE61HT181C2A9 30 40 NFE61HT361C2A9 NFE61HT681D2A9 NFE61HT102F2A9 NFE61HT332Z2A9 50 60 0.1 1 10 Frequency (MHz) 88 100 1000 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. On-Board Type (DC) EMI Suppression Filters (EMIFILr) Chip EMIFILr for Large Current NFM18P/21P/3DP/41P Series NFM18P Series The NFM18P series is an EMI suppression filter for high speed IC power lines which realizes large capacitance 1 microF max. and rated current 2A in 1608 size by Murata's multilayer technology. 0.2 min. 0.2 min. (1) 0.8±0.1 (2) (3) (2) 0.25±0.1 0.25±0.1 0.8±0.1 0.4±0.1 ■ Features 1.6±0.1 1. Ultra-small size in 1.6x0.8mm. 2. 3-terminal structure with low residual (ESL)* and large capacitance 1 microF (max.) realize large insertion loss characteristics over wide frequency range. 3. Large rated current 2A is suitable for noise suppression of circuits which require large current. 4. The NFM18P series has line up of capacitance 0.1 to 1.0 microF. * Not exceeding one-tenth of monolithic ceramic capacitors (2-terminal). 2 NFM18P (1 micro F) (in mm) 0.4±0.1 0.8±0.1 0.6±0.1 0.25±0.1 0.2 min. 1.6±0.1 ■ Applications (1) (3) NFM18P (0.1-0.47 micro F) (2) 0.8±0.1 (2) 1. Noise suppression for large capacitance circuits such as high speed IC power lines 2. Control change of voltage for high speed IC 0.2±0.1 (in mm) Capacitance (µF) Part Number Rated Voltage (Vdc) Rated Current (A) Insulation Resistance (M ohm) Operating Temperature Range (°C) NFM18PC104R1C3 0.1 +20%,-20% 16 2 1000 min. -55 to 125 NFM18PC224R0J3 0.22 +20%,-20% 6.3 2 1000 min. -55 to 125 NFM18PC474R0J3 0.47 +20%,-20% 6.3 2 1000 min. -55 to 125 NFM18PC105R0J3 1.0 +20%,-20% 6.3 2 500 min. -55 to 105 ■ Equivalent Circuit ■ Insertion Loss Characteristics NFM18P Series (50Ω - 50Ω) 0 10 NFM18PC104R1C3 20 NFM18PC224R0J3 (1) Input Output (3) * no polarity. GND (2) Insertion Loss (dB) 30 NFM18PC474R0J3 40 NFM18PC105R0J3 50 60 70 80 90 0.1 1 10 100 1000 2000 Frequency (MHz) 89 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. NFM21P Series 0.3±0.2 0.85±0.1 NFM21P is a 3-terminal structure component. This product can be applied to large current DC power lines. NFM21P is suitable for noise suppression of DC power lines where relatively operates large current. 0.6±0.2 2.0±0.2 ■ Features 1. The rated current of 4A is suitable for IC's individual power lines. 2. Small dimension enables higher density packaging. NFM21P is much smaller size (2.0x1.25x0.85mm). 3. Murata's original internal electrode structure design realizes excellent EMI suppression effects from low frequency to high frequency. (3) NFM21P (2) 0.25±0.2 (1) (in mm) Capacitance (µF) Rated Voltage (Vdc) Rated Current (A) Insulation Resistance (M ohm) Operating Temperature Range (°C) NFM21PC104R1E3 0.1 +20%,-20% 25 2 1000 min. -55 to 125 NFM21PC224R1C3 0.22 +20%,-20% 16 2 1000 min. -55 to 125 NFM21PC474R1C3 0.47 +20%,-20% 16 2 1000 min. -55 to 125 NFM21PC105B1A3 1.0 +20%,-20% 10 4 500 min. -40 to 85 NFM21PC105F1C3 1.0 +80%,-20% 16 2 500 min. -40 to 85 Part Number ■ Equivalent Circuit ■ Insertion Loss Characteristics NFM21P Series (50Ω - 50Ω) 0 20 (1) Input Output (3) * no polarity. Insertion Loss (dB) 2 1.25±0.1 (2) NFM21PC104R1E3 NFM21PC224R1C3 40 60 GND NFM21PC474R1C3 (2) 80 NFM21PC105F1C3 NFM21PC105B1A3 100 1 10 100 Frequency (MHz) 90 1000 2000 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. NFM3DP Series 0.7±0.2 The chip "EMIFIL" NFM3DP is a chip type 3-terminal capacitor with high rated current of 2A. This series is suited for noise suppression in DC power supply lines of digital instruments. 1.1±0.3 3.2±0.2 1.25±0.2 (2) ■ Features (1) (3) (2) 0.25±0.2 1. Large rated current (2A) is suitable for application in DC power lines. 2. Small size (3.2x1.25mm) and low profile (0.7mm max.) NFM3DP 0.3±0.2 (in mm) ■ Applications 1. Personal computers, word processors and peripherals 2. Telephones, PPCs, communications equipment, etc. 3. Digital TVs, VCRs 4. Telecommunications equipment Capacitance (µF) Rated Voltage (Vdc) Rated Current (A) Insulation Resistance (M ohm) Operating Temperature Range (°C) 0.022 +20%,-20% 50 2 1000 min. -55 to 85 Part Number NFM3DPC223R1H3 2 ■ Equivalent Circuit ■ Insertion Loss Characteristics NFM3DP (50Ω - 50Ω) 0 (1) Input Output (3) * no polarity. GND Insertion Loss (dB) 20 40 60 (2) 80 100 0.1 0.5 1 5 10 Frequency (MHz) 50 100 500 1000 ■ Notice (Rating) 2.0 Rated Current (A) When the NFM3DP series is used in operating temperatures exceeding +85°C, derating of current is necessary. Please apply the derating curve shown below according to the operating temperature. 0.5 0 -55 85 125 Operating Temperature (˚C) 91 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. NFM41P Series 1.0±0.2 The chip "EMIFIL" NFM41P series consists of 3-terminal structure SMT components. These components are able to be applied to large current DC power lines. NFM41P series are suitable in noise suppression in DC lines where relatively large currents operate. 1.5±0.3 4.5±0.3 1.6±0.3 (2) ■ Features 0.3 NFM41P (2) 0.4±0.3 (in mm) ■ Applications 1. Personal computers, word processors and peripherals 2. Telephones, PPCs, communications equipment, etc. 3. Digital TVs, VCRs 4. Telecommunications equipment Part Number NFM41PC204F1H3 Capacitance (µF) Rated Voltage (Vdc) Rated Current (A) Insulation Resistance (M ohm) Operating Temperature Range (°C) 0.2 +80%,-20% 50 2 1000 min. -55 to 85 ■ Equivalent Circuit ■ Insertion Loss Characteristics NFM41P (50Ω - 50Ω) 0 20 (1) Input Output (3) * no polarity. GND (2) Insertion Loss (dB) 2 (3) 0.3± 0.2 (1) 1. Large rated current (2A) is suitable for the application in DC power lines. 2. High electrostatic capacitance and remarkable high frequency performance are effective for immunity against surge noise and pulse noise. 40 60 80 100 1 5 10 50 Frequency (MHz) 92 100 500 1000 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. On-Board Type (DC) EMI Suppression Filters (EMIFILr) Chip EMIGUARDr (EMIFILr with Varistor Function) Part Numbering Chip EMIGUARDr (EMIFILr with Varistor Function) (Global Part Number) VF M 41 R q w e r t N 222 N 1C y u i o yCapacitance qProduct ID Expressed by three figures. The unit is in pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. Product ID VF L Chip EMIGUARDr wStructure uCapacitance Tolerance Code Structure Code Capacitance Tolerance M Monolithic Type N ±30% eDimensions (LgW) iRated Voltage Code Dimensions (LgW) EIA Code Rated Voltage 41 4.5g1.6mm 1806 1C 16V rOuter Electrode 3 oPackaging Code Outer Electrode Code Packaging R Standard Type L Plastic Taping (ø180mm Reel) B Bulk tCategory Code Category N Standard 93 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. On-Board Type (DC) EMI Suppression Filters (EMIFILr) Chip EMIGUARDr (EMIFILr with Varistor Function) VFM41R Series ■ Features The VFM41R series is a chip type EMI filter with varistor function. Its 3-terminal structure provides high performance by suppressing high frequency noise and absorbing surge noise. VFM41R can meet both EMI noise and surge noise. 0.4±0.3 1.4±0.3 0.4±0.3 (1) 1.25±0.3 (2) (3) 1.6±0.3 (2) 4.5±0.3 ■ Applications in mm ESD surge protection and EMI suppression in various electric equipment such as car electronic equipment, portable electronic equipment, telecommunication terminals, office automation equipment, home automation equipment or factory automation equipment Part Number VFM41RN222N1C Varistor Voltage (V) Clumping Voltage (max.) Capacitance (pF) Rated Current (mA) Peak Pulse Current (A) Operating Temperature Range (°C) 16 27 +5V,-5V 50V(V2A) 2200 +30%,-30% 200 50 -40 to 125 Please refer to Part Numbering for Type and Length of Lead. ■ Equivalent Circuit ■ Insertion Loss Characteristics (50Ω - 50Ω) 0 20 (1) Input Output (3) GND (2) No polarity Insertion Loss (dB) 3 Rated Voltage (Vdc) 40 60 80 1 5 10 50 Frequency (MHz) 94 100 500 1000 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. EMI Suppression Effect Noise Suppression Effect of VFM Series !Impulse Noise Absorption [TESTING CIRCUIT] (Comparison between VFM41R and Standard 2-terminal Varistor) Oscilloscope Sample 50Ω Attenuator Impulse Generator (Zo=50Ω) (Pulse Width 100ns) EMI Suppression Effect Voltage Waveform Output Voltage [V] Type of Filter Description The Lower chart is a frequency response of the upper chart. Note that the scale of original wave chart and that of the output wave chart is different because of circumstances. 2225 1675 1125 575 25 –50 0 50 100 Time [ns] 150 200 Frequency Spectrum Output Voltage [dBm] Original Waveform 30 20 10 3 0 –10 –20 10MHz 990MHz Frequency [LINEAR] Voltage Waveform The commonly used 2-terminal varistor Output Voltage [V] ∗ Final voltage falls below 0V because of the effect of signal reflection. 300 200 Output Voltage [dBm] 174V peak 100 0 –100 –50 Frequency Spectrum The rising part of pulse, which is mostly consists of high-frequency element, remains because inductance in electrodes becomes obstacle. 0 50 100 Time [ns] 150 200 30 20 10 0 –10 –20 10MHz 990MHz Voltage Waveform Output Voltage [V] Frequency [LINEAR] Chip Solid EMIGUARDr VFM41R 200 100 Output Voltage [dBm] 76V peak 0 –100 –50 Frequency Spectrum The 3-terminal structure minimizes the effect of inductance in electrodes and pulse rising noise is absorbed completely. 300 0 50 100 Time [ns] 150 200 30 20 10 0 –10 –20 10MHz 990MHz Frequency [LINEAR] 95 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. On-Board Type (DC) EMI Suppression Filters (EMIFILr) Chip Common Mode Choke Coils Part Numbering Chip Common Mode Choke Coils (Global Part Number) DL W 21 S q w e r t N 371 S y Q 2 L u i o !0 qProduct ID tCategory Product ID DL Chip Common Mode Choke Coils wStructure Code Category N Standard Type yImpedance Code Typical impedance at 100MHz is expressed by three figures. The unit is in ohm (Ω). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. Structure W Winding Type M Monolithic Type P Film Type uCircuit eDimensions (LgW) Ex.) Code Code Dimensions (LgW) EIA S 11 1.25g1.0mm 0504 M 21 2.0g1.2mm 0805 31 3.2g1.6mm 1206 2H 2.5g2.0mm 1008 Code 5A 5.0g3.6mm 2014 L 5B 5.0g5.0mm 2020 Q Circuit Standard Type Series except DLP31D DLP31D iFeatures Features Expressed by a letter. Z 4 rType oNumber of Signal Line Code Type S Magnetically Shielded One Circuit Type Code D Magnetically Shielded Two Circuit Type 2 Two Lines H Open Magnetic One Circuit Type 3 Three Lines G Magnetically Monolithic Type (sectional winding) 4 Four Lines Number of Signal Line !0Packaging 96 Code Packaging Series K Plastic Taping (ø330mm Reel) DLW5AH/DLW5BS L Plastic Taping (ø180mm Reel) All series B Bulk All series C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. On-Board Type (DC) EMI Suppression Filters (EMIFILr) Chip Common Mode Choke Coils Film Type DLP11S/DLP31S Series DLP11S Series 0.3±0.1 0.82±0.1 ■ Features 1. Small size and tight dimensional tolerance SIZE : 1.25x1.0x0.82mm tolerance : +/-0.1mm 2. Useful impedance line-up 90/120/160/200ohm 3. High noise suppression for high frequency 4. No distortion to high-speed signal transmission 0.55±0.1 ■ Applications Common mode noise suppression of high speed differential signal lines for USB, IEEE1394, LVDS. 1. Note PC, PDA 2. Cellular phone 3. Digital Still Camera, Digital Video Camera (3) 1.25±0.1 (1) 0.25 +0.1 -0.05 (4) (2) (in mm) 1.0±0.1 Common Mode Impedance (at 100MHz, 20 degree C) (ohm) Rated Current (mA) Rated Voltage (Vdc) Insulation Resistance (M ohm) DLP11SN900SL2 90 ±20% 160 5 100 min. 12.5 1.4 ±25% DLP11SN121SL2 120 ±20% 140 5 100 min. 12.5 2.0 ±25% DLP11SN161SL2 160 ±20% 120 5 100 min. 12.5 2.7 ±25% DLP11SN201SL2 200 ±20% 130 5 100 min. 12.5 2.5 ±25% Part Number Withstand Voltage DC Resistance (Vdc) (ohm) Operating Temperature Range : -40°C to 85°C 4 ■ Equivalent Circuit ■ Impedance-Frequency Characteristics 10000 Common mode DLP11SN201SL2 1000 (2) Impedance (Ω) (1) DLP11SN161SL2 DLP11SN121SL2 100 DLP11SN900SL2 DLP11SN900SL2 DLP11SN121SL2 10 (3) (4) DLP11SN201SL2 1 No polarity DLP11SN161SL2 Differential mode 1 10 100 1000 10000 Frequency (MHz) 97 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. (4) (1) (3) (2) 1.15±0.15 0.3±0.2 DLP31S series is chip common mode choke coil that realizes high impedance in a small size with ferrite material technology and film processing technology. DLP31S series has excellent performance at high frequency range. It is suitable for differential signal line application. 1.6±0.15 DLP31S Series ■ Features (2.1) 1. Small size, low profile, SMD. 3.2x1.6x1.15mm (tolerance: 0.15mm) 2. High common mode impedance (550ohm at 100MHz typ.) in small size. 3. DLP31S suppresses high frequency noise that was unable to be suppresses with existing common mode choke coils. Suitable for differential signal lines as like USB, because DLP31S does not provide distortion to high speed signal transmission due to its high coupling (coupling coefficient: 0.98 min.) 3.2±0.15 0.7±0.2 (in mm) ■ Applications 1. USB lines of PC, peripheral equipment. 2. LVDS lines of Note-PC, LCD. 3. USB lines of digital AV equipment such as digital cameras. Common Mode Impedance (at 100MHz, 20 degree C) (ohm) Rated Current (mA) Rated Voltage (Vdc) Insulation Resistance (M ohm) DLP31SN121SL2 120 ±20% 100 16 100 min. 40 2.0 max. DLP31SN221SL2 220 ±20% 100 16 100 min. 40 2.5 max. DLP31SN551SL2 550 ±20% 100 16 100 min. 40 3.6 max. Part Number Operating Temperature Range : -40°C to 85°C ■ Equivalent Circuit ■ Impedance-Frequency Characteristics 10000 (1) 1000 (2) Impedance (Ω) 4 Withstand Voltage DC Resistance (Vdc) (ohm) DLP31SN551SL2 DLP31SN221SL2 DLP31SN121SL2 100 (Common mode) 10 (3) (4) No polarity DLP31SN121SL2 DLP31SN221SL2 DLP31SN551SL2 (Differential mode) 1 1 10 100 Frequency (MHz) 98 1000 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. On-Board Type (DC) EMI Suppression Filters (EMIFILr) Chip Common Mode Choke Coils Arrays Film Type DLP31D Series DLP31D Series 0.4±0.2 1.15±0.15 DLP31D series is chip common mode choke coil array which realizes high coupling and high impedance in a small size with ferrite material technology and thin film processing technology. 0.8±0.1 0.4±0.2 (1) (2) (3) (4) (5) (6) (7) (8) 1.6±0.15 ■ Features 0.3±0.2 1. 2 components are included in 3.2x1.6mm 2. Thin type 1.15mm 3. High common mode Impedance characteristics (max. 440ohm, at 100MHz) 4. The DLP31D can suppress common mode noise without damage to signal wave. 3.2±0.15 (in mm) ■ Applications Common mode noise suppression of high speed differential signal lines for USB, IEEE1394, LVDS. 1. Main board of personal computer, note PC 2. Printer, Scanner 3. LCD monitor 4. Game equipment 5. PC peripheral equipment Common Mode Impedance (at 100MHz, 20 degree C) (ohm) Rated Current (mA) Rated Voltage (Vdc) Insulation Resistance (M ohm) DLP31DN900ML4 90 ±20% 160 10 100 min. 25 1.1 max. DLP31DN131ML4 130 ±20% 120 10 100 min. 25 1.6 max. DLP31DN201ML4 200 ±20% 100 10 100 min. 25 2.2 max. DLP31DN321ML4 320 ±20% 80 10 100 min. 25 3.5 max. DLP31DN441ML4 440 ±20% 70 10 100 min. 25 4.3 max. Part Number Withstand Voltage DC Resistance (Vdc) (ohm) Operating Temperature Range : -40°C to 85°C ■ Equivalent Circuit ■ Impedance-Frequency Characteristics 10000 (1) (2) (3) (4) Common mode DLP31DN471SL4 Impedance (ohm) 1000 DLP31DN361SL4 DLP31DN201SL4 DLP31DN161SL4 100 DLP31DN900SL4 10 (5) (6) (7) No polarity (8) DLP31DN900SL4 DLP31DN161SL4 DLP31DN201SL DLP31DN361SL4 DLP31DN471SL4 Differential mode 1 1 10 100 1000 Frequency (MHz) 99 4 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. On-Board Type (DC) EMI Suppression Filters (EMIFILr) (1) (3) (5) (4) (6) 0.3±0.2 DLM2HG Series is a high quality noise suppression filter for headphone lines of high quality digital music equipment. 2.5±0.2 Chip Common Mode Choke Coils Monolithic Type DLM2HG Series ■ Features (2) 1. Low distortion in audio signal, Low crosstalk. 2. Effective in noise suppression both of common mode and of differential mode. 3. Small size, low profile, SMD 2.5x2.0x1.2mm 1.2±0.2 2.0±0.2 0.4±0.2 ■ Application 0.8±0.1 (in mm) 1. Headphone lines of digital music equipment such as DVD, MD player. 2. Headphone lines of Note-PC, PDA Part Number Common Mode Impedance (at 100MHz, 20 degree C) (ohm) Rated Current (mA) Rated Voltage (Vdc) Insulation Resistance (M ohm) 600 ±25% 100 16 100 min. DLM2HGN601SZ3 Withstand Voltage DC Resistance (Vdc) (ohm) 100 0.40 max. Operating Temperature Range : -40°C to 85°C ■ Equivalent Circuit ■ Impedance-Frequency Characteristics 10000 4 (1) (3) (5) Differential Mode Impedance (Ω) 1000 100 Common Mode 10 (2) (4) (6) No polarity 1 1 100 10 100 Frequency (MHz) 1000 10000 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. On-Board Type (DC) EMI Suppression Filters (EMIFILr) Chip Common Mode Choke Coils Winding Type DLW21S/DLW21H/DLW31S Series DLW21S Series 1. DLW21S series realizes small size and low profile. 2.0x1.2x1.2mm 2. High common mode impedance at high frequency effects excellent noise suppression performance. 3. Various common mode impedance items of 67 to 370ohm can be used, considering noise level and signal frequency. 4. DLW21S series enables noise suppression for differential signal line without distortion in high speed signal transmission due to its high coupling. 5. Lead is not contained in the product. 6. Small dimension enables higher density packaging. (0.17) 1.2±0.2 ■ Features 2.0±0.2 1.2±0.2 (2) (4) (3) (0.45) (0.45) (0.4) (0.4) (1) DLW21S (in mm) ■ Applications 1. USB lines of PC, Peripheral equipment. 2. LVDS lines of Note-PC, LCD. 3. USB lines of Small digital AV equipment such as digital camera. Common Mode Impedance (at 100MHz, 20 degree C) (ohm) Rated Current (mA) Rated Voltage (Vdc) Insulation Resistance (M ohm) DLW21SN670SQ2 67 ±25% 400 50 10 min. 125 0.25 max. DLW21SN900SQ2 90 ±25% 330 50 10 min. 125 0.35 max. DLW21SN121SQ2 120 ±25% 370 50 10 min. 125 0.30 max. DLW21SN181SQ2 180 ±25% 330 50 10 min. 125 0.35 max. DLW21SN261SQ2 260 ±25% 300 50 10 min. 125 0.40 max. DLW21SN371SQ2 370 ±25% 280 50 10 min. 125 0.45 max. Part Number Withstand Voltage DC Resistance (Vdc) (ohm) Operating Temperature Range : -40°C to 85°C ■ Equivalent Circuit ■ Impedance-Frequency Characteristics DLW21S DLW21S 10000 DLW21SN371SQ2 DLW21SN261SQ2 DLW21SN181SQ2 DLW21SN121SQ2 DLW21SN900SQ2 DLW21SN670SQ2 Common mode (2) (1) Impedance (Ω) 1000 100 10 Differential mode DLW21SN371SQ2 DLW21SN261SQ2 DLW21SN181SQ2 DLW21SN121SQ2 DLW21SN900SQ2 DLW21SN670SQ2 (3) (4) 1 No polarity 0.1 1 10 100 1000 Frequency (MHz) 101 4 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. 0.9±0.1 ■ Features 1. Small size and low profile (2.0x1.2x0.9mm). Excellent noise suppression for sets of small and thin size. 2. High common mode impedance at high frequency effects excellent noise suppression performance. 3. Various common mode impedance from 67 to 180 ohm can be used, selected depending on noise level and signal frequency. 4. Suitable for differential signal line like USB2.0, IEEE1394 and LVDS, because DLW21H does not provide distortion to high speed signal transmission due to its high coupling. (USB2.0: DLW21HN900SQ2) 5. Lead is not contained in the product. 6. Small dimension enables higher density mounting. (0.17) DLW21H Series 2.0±0.2 1.2±0.2 (0.45) (0.45) (1) (2) Electrode (0.4) (0.4) () : Reference Value DLW21H (4) (3) (in mm) ■ Applications Common mode noise suppression of signal lines in high speed and high density digital equipment such as personal computers and peripherals and telecommunication equipment. Common Mode Impedance (at 100MHz, 20 degree C) (ohm) Rated Current (mA) Rated Voltage (Vdc) Insulation Resistance (M ohm) 67 (Typ.) 330 50 10 min. 125 0.35 max. DLW21HN900SQ2 90 (Typ.) 330 50 10 min. 125 0.35 max. DLW21HN121SQ2 120 (Typ.) 280 50 10 min. 125 0.45 max. DLW21HN181SQ2 180 (Typ.) 250 50 10 min. 125 0.50 max. Part Number DLW21HN670SQ2 Operating Temperature Range : -40°C to 85°C DLW21H DLW21H 10000 DLW21HN181SQ2 Common mode 1000 (2) (1) Impedance (Ω) 4 Withstand Voltage DC Resistance (Vdc) (ohm) DLW21HN121SQ2 DLW21HN900SQ2 100 DLW21HN670SQ2 10 DLW21HN181SQ2 (3) (4) DLW21HN121SQ2 1 Differential mode No polarity 0.1 1 DLW21HN900SQ2 DLW21HN670SQ2 10 100 Frequency (MHz) 102 1000 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. DLW31S Series 1. DLW31S realizes small size and low profile. 3.2x1.6x1.9mm. 2. High common mode impedance at high frequency effects excellent noise suppression performance. 3. Various common mode impedance items of 90 to 2200ohm can be used, considering noise level and signal frequency. 4. DLW31S series enables noise suppression for differential signal line without distortion in high speed signal transmission due to its high coupling. 5. Lead is not contained in the product. 6. Small dimension enables higher density packaging. 1.9±0.2 0.25±0.1 ■ Features 1.6±0.2 3.2±0.2 (2) (4) (3) (0.6) (0.6) (0.6) (0.6) (1) DLW31S (in mm) ■ Applications 1. USB lines of PC, Peripheral equipment. 2. LVDS lines of Note-PC, LCD. Common Mode Impedance (at 100MHz, 20 degree C) (ohm) Rated Current (mA) Rated Voltage (Vdc) Insulation Resistance (M ohm) DLW31SN900SQ2 90 (Typ.) 370 50 10 min. 125 0.3 max. DLW31SN161SQ2 160 (Typ.) 340 50 10 min. 125 0.4 max. DLW31SN261SQ2 260 (Typ.) 310 50 10 min. 125 0.5 max. DLW31SN601SQ2 600 (Typ.) 260 50 10 min. 125 0.8 max. DLW31SN102SQ2 1000 (Typ.) 230 50 10 min. 125 1.0 max. DLW31SN222SQ2 2200 (Typ.) 200 50 10 min. 125 1.2 max. Part Number Withstand Voltage DC Resistance (Vdc) (ohm) Operating Temperature Range : -40°C to 85°C 4 ■ Equivalent Circuit ■ Impedance-Frequency Characteristics DLW31S DLW31S 10000 DLW31SN222SQ2 Common mode DLW31SN102SQ2 DLW31SN601SQ2 DLW31SN261SQ2 DLW31SN161SQ2 DLW31SN900SQ2 1000 (2) Impedance (Ω) (1) (3) (4) No polarity 100 10 DLW31SN222SQ2 DLW31SN102SQ2 DLW31SN601SQ2 DLW31SN261SQ2 DLW31SN161SQ2 DLW31SN900SQ2 Differential mode 1 0.1 1 10 100 1000 Frequency (MHz) 103 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. On-Board Type (DC) EMI Suppression Filters (EMIFILr) * ■ Features (W) 3.6±0.3 (1) 0.5 min. (L) 5.0±0.3 (2) 1.7 1.3 1.7 ±0.3 ±0.3 ±0.3 Starting position of wiring should * covered with resin. DLW5AH Series (4) (3) 1.3 0.9 1.3 ±0.3 ±0.3 ±0.3 0.45 min. in mm ■ Applications 1. DC power lines in AC adapter of Portable equipment. 2. DC power lines of DC-DC converter, battery charger. (T) 4.5 max. 1. High impedance (max. of 4000ohm at 100MHz : DLW5AH) enables great noise suppression. 2. Large rated current (max. of 5A) is suitable for power line use. 3. DLW5AH/BS series does not damage high speed signal due to high coupling common mode choke coil structure. 4. Automatic mounting can be applied. * 0.45 min. The DLW5AH/5BS series is high performance wound type chip common mode choke coil. (T) 4.3 max. Chip Common Mode Choke Coils Winding Type for Large Current DLW5AH/DLW5BS Series 3.6±0.3 (W) 5.0±0.3 (2) (4) (3) 1.7 1.3 1.7 ±0.3 ±0.3 ±0.3 (1) 0.5 min. (L) 5.0±0.3 DLW5BS Series 1.3 0.9 1.3 ±0.3 ±0.3 ±0.3 in mm 4 Common Mode Impedance (at 100MHz, 20 degree C) (ohm) Part Number Rated Current (mA) Rated Voltage (Vdc) Insulation Resistance (M ohm) Withstand Voltage DC Resistance (Vdc) (ohm) DLW5AHN402SQ2 4000 (Typ.) 200 50 10 min. 125 3.0 max. DLW5BSN191SQ2 190 (Typ.) 5000 50 10 min. 125 0.02 max. DLW5BSN351SQ2 350 (Typ.) 2000 50 10 min. 125 0.04 max. DLW5BSN102SQ2 1000 (Typ.) 1500 50 10 min. 125 0.06 max. DLW5BSN152SQ2 1500 (Typ.) 1000 50 10 min. 125 0.1 max. DLW5BSN302SQ2 3000 (Typ.) 500 50 10 min. 125 0.3 max. Operating Temperature Range : -25°C to 85°C ■ Equivalent Circuit ■ Impedance-Frequency (Typical) 100000 (2) Common mode DLW5AHN402SQ2 DLW5BSN302SQ2 DLW5BSN152SQ2 DLW5BSN102SQ2 DLW5BSN351SQ2 DLW5BSN191SQ2 10000 Impedance (Ω) (1) 1000 100 DLW5AHN402SQ2 DLW5BSN302SQ2 DLW5BSN152SQ2 (3) (4) No polarity DLW5BSN102SQ2 DLW5BSN351SQ2 DLW5BSN191SQ2 Differential mode 10 1 10 100 Frequency (MHz) 104 1000 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. On-Board Type (DC) EMI Suppression Filters (EMIFILr) Ferrite Beads Inductors Part Numbering Ferrite Beads Inductors (Global Part Number) R1 M 2 B BL 02 RN 2 q w e r t y u i qProduct ID yLead Length, Space Product ID BL Ferrite Beads Inductors wSeries Code Lead Length, Space A Bulk, Axial Type, 3.7mm D Bulk, Axial Type, 45.0mm E Taping Axial Type, 26.0mm Code Series F Taping, Axial Type, 52.0mm 01 Beads ø3.6 J Bulk, Radial Type, 5.0mm 02 Beads ø3.4 M Bulk, Radial Type, 10.0mm 03 Beads ø2.3 max. N Taping, Radial Type, 16.5mm P Taping, Radial Type, 18.5mm Q Taping, Radial Type, 20.0mm eBeads Core Material Code Beads Core Material RN Standard Type Numbers of Beads Core 1 1 2 2 BL01 BL02/BL03 uLead Diameter rNumbers of Beads Core Code Series Code Lead Diameter 1 ø0.60mm 2 ø0.65mm tLead Type Code Lead Type A1 Axial Straight Type A2 Axial Crimp Type R1 Radial Straight Type R2 Radial Straight and wave formed Leads Type R3 Radial Crimp Type 5 iPackaging Code Packaging A Ammo Pack B Bulk J Paper Reel (ø320mm) Series BL01/BL02/BL03 All series BL01 105 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. On-Board Type (DC) EMI Suppression Filters (EMIFILr) Ferrite Beads Inductors BL01/BL02/BL03 Series ■ Features ø3.6±0.15 BL01/02/03 series are ferrite beads with lead wires to produce a high frequency loss for suppression of noise. Simple construction and easy-to-use. Effective for low impedance circuits such as power supplies and grounds. Effective also for preventing overshoot and undershoot the digital signal in clocks or the like, and suppressing the higher harmonic wave. Suitable for prevention of abnormal oscillation at high frequency amplifying circuit. ø0.65 ∗ 20 min. ∗ 5.0±0.3 20 min. 45 min. ∗Coating extending on leads : 1.5 max. BL01RN1A1D2B (in mm) 7.5 max. ∗ ∗ ∗ 7.5 max. 15.0 min. ∗ 3.7±1.0 ø0.65 ø3.4±0.2 10.0±1.0 ø3.6±0.15 10±1.0 ø0.65 5.0±0.8 BL02RN1R2M2B BL01RN1A2A2B 5.0±0.3 ∗Coating extending on leads : 1.5 max. ∗There is excess bond stick on the wire. (in mm) 9.0max 8.0 max. 15.0min 7.5max 15.0 min. 12.0 max. ∗ 10.0±1.0 5.0±0.8 ø0.65 5.0±1.0 BL02RN1R3J2B 3.4±0.2 ø3.4±0.2 ∗ 5 φ0.65 5.0±0.8 BL02RN2R1M2B ∗There is excess bond stick on the wire. (in mm) (in mm) 2.3max 8.3max ø3.4±0.2 15.0min 15.0 min. 12.0 max. 6.5max 9.0 max. ø0.65 5.0±0.8 φ0.60 BL03RN2R1M1B (in mm) 106 10.0±1.0 5.0±1.0 5.0±0.8 BL02RN2R3J2B (in mm) (in mm) C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Rated Current (A) Operating Temperature Range (°C) BL01RN1A1D2B 7 -40 to 85 BL01RN1A1E1A 6 -40 to 85 BL01RN1A1F1J 6 -40 to 85 BL01RN1A2A2B 7 -40 to 85 BL02RN1R2M2B 7 -40 to 85 BL02RN1R2N1A 6 -40 to 85 BL02RN1R2P1A 6 -40 to 85 BL02RN1R2Q1A 6 -40 to 85 BL02RN1R3J2B 7 -40 to 85 BL02RN1R3N1A 6 -40 to 85 BL02RN2R1M2B 7 -40 to 85 BL02RN2R1N1A 6 -40 to 85 BL02RN2R1P1A 6 -40 to 85 BL02RN2R1Q1A 6 -40 to 85 BL02RN2R3J2B 7 -40 to 85 BL02RN2R3N1A 6 -40 to 85 BL03RN2R1M1B 6 -40 to 85 BL03RN2R1N1A 6 -40 to 85 BL03RN2R1P1A 6 -40 to 85 BL03RN2R1Q1A 6 -40 to 85 Part Number ■ Equivalent Circuit (Resistance element becomes dominant at high frequencies.) 5 ■ Impedance-Frequency Characteristics BL02RN1 160 140 140 120 120 100 100 Impedance (Ω) Impedance (Ω) BL01RN1 160 80 Z 60 R 80 Z 60 R 40 40 X X 20 20 0 0 0.5 1 2 5 10 20 50 Frequency (MHz) 100 200 500 1000 0.5 1 2 5 10 20 50 100 200 500 1000 Frequency (MHz) Continued on the following page. 107 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. ■ Impedance-Frequency Characteristics BL03RN2 160 140 140 120 120 100 Z 80 Impedance (Ω) Impedance (Ω) BL02RN2 160 R 60 100 80 Z 60 R X 40 40 X 20 20 0 0 0.5 1 2 5 10 20 50 Frequency (MHz) 5 108 100 200 500 1000 0.5 1 2 5 10 20 50 Frequency (MHz) 100 200 500 1000 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. On-Board Type (DC) EMI Suppression Filters (EMIFILr) Disc Type EMIFILr Part Numbering Disc Type EMIFILr (Global Part Number) DS S H B3 2E 271 Q55 q w e r t y u 9 i B o qProduct ID tTemperature Characteristics Product ID DS Code Capacitance Change B3 ±10% (Temperature Range : -25˚C to +85˚C) Three-terminals Capacitor wStructure C5 ±22% (Temperature Range : -25˚C to +85˚C) D3 +20/-30% (Temperature Range : -25˚C to +85˚C) Code Structure E3 +20/-55% (Temperature Range : -25˚C to +85˚C) N No Ferrite Beads Type E5 +22/-56% (Temperature Range : -25˚C to +85˚C) S Built-in Ferrite Beads Type F3 +30/-80% (Temperature Range : -25˚C to +85˚C) T with Ferrite Beads Type Z8 +30/-85% (Temperature Range : -10˚C to +60˚C) Code Style Code Rated Voltage 6 Diameter 8.0mm Type 1C 16V 9 Diameter 9.5mm Type 1H 50V 2A 100V 2E 250V eStyle yRated Voltage rCategory Code Category N for General Use H for Heavy-duty uCapacitance Expressed by three figures. The unit is in pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. iLead Type/oPackaging Code Lead Type Q55B Q50B Q52B Straight Lead Length* (in mm) All series 4.0±0.5 DST9N/H 4.0±0.5 Q56B 6.0±1.0 T51B Incrimp 4.0±0.5 20.0±1.0 Q92J 16.5±1.0 Q91A Straight Q93A 18.5±1.0 U31A Incrimp DSS9N/H, DST9N Paper Reel (ø320mm) 16.5±1.0 18.5±1.0 DSS9N/H DSp6, DSN9N/H 20.0±1.0 16.5±1.0 5 DSN6/9, DSS6/9 DSS6N 18.5±1.0 Q92A U21A Bulk 25.0 min. Q91J Q93J DST9N 6.0±1.0 Q54B T41B Series Packaging 25.0 min. Ammo Pack All series except DSS9N/H DSS6N *Lead Distance between Reference and Bottom Planes except Bulk. 109 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. On-Board Type (DC) EMI Suppression Filters (EMIFILr) Disc Type EMIFILr DSN6/DSS6 Series 2.54 max. 7.0 max. ■ Features 8.0 max. DS_6 is comnpact, high performance lead type EMI suppression filter which can be mounted 2.54mm pitch. Its 3-terminal structure enables nice high frequency performance. I Q55 Type : 25.0 min. Q56 Type : 6.0±1.0 Q54 Type : 4.0±0.5 I 2.5±0.5 5.0±0.5 ø0.6 DSN6_Q55B Series GND (in mm) 2.54 max. 8.0 max. 2.54 max. 8.0 max. *1 7.0 max. *1 10.0 max. *2 *2 I T52 Type : 25.0 min. T41 Type : 4.0±0.5 I Q55 Type : 25.0 min. Q56 Type : 6.0±1.0 Q54 Type : 4.0±0.5 2.5±0.5 I I 2.5±0.5 5.0±0.5 5.0±0.5 ø0.6 DSS6_T51B Series Incrimp Type ø0.6 GND DSS6_Q55B Series Straight Type (in mm) *1 There may be a hole on the top of ferrite beads, which cause no characteristics deterioration. *2 Bottom of the ferrite beads may not be level with each other. GND (in mm) *1 There may be a hole on the top of ferrite beads, which cause no characteristics deterioration. *2 Bottom of the ferrite beads may not be level with each other. DSN6 Series Capacitance (pF) Rated Voltage (Vdc) Rated Current (A) Operating Temperature Range (°C) DSN6NC51H220 22 +20%,-20% 50 6 -25 to 85 DSN6NC51H330 33 +20%,-20% 50 6 -25 to 85 DSN6NC51H470 47 +20%,-20% 50 6 -25 to 85 DSN6NC51H101 100 +20%,-20% 50 6 -25 to 85 DSN6NC51H271 270 +20%,-20% 50 6 -25 to 85 DSN6NC51H102 1000 +20%,-20% 50 6 -25 to 85 DSN6NC51H222 2200 +20%,-20% 50 6 -25 to 85 DSN6NZ81H103 10000 +80%,-20% 50 6 -25 to 85 Part Number 5 Please refer to Part Numbering for Type and Length of Lead. 110 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. ■ Equivalent Circuit ■ Insertion Loss Characteristics (Typical) (50Ω - 50Ω) 0 1 2 8 Insertion Loss (dB) 20 7 6 5 4 3 1 : 22pF 2 : 33pF 3 : 47pF 4 : 100pF 5 : 270pF 6 :1000pF 7 : 2200pF 8 : 10000pF 40 60 80 GND 100 No polarity 120 0.1 1 10 100 1000 Frequency (MHz) Built-in Ferrite Beads DSS6 Series Incrimp Type Capacitance (pF) Rated Voltage (Vdc) Rated Current (A) Operating Temperature Range (°C) DSS6NC52A220 22 +20%,-20% 100 6 -25 to 85 DSS6NC52A330 33 +20%,-20% 100 6 -25 to 85 DSS6NC52A470 47 +20%,-20% 100 6 -25 to 85 DSS6NC52A101 100 +20%,-20% 100 6 -25 to 85 DSS6NC52A151 150 +20%,-20% 100 6 -25 to 85 DSS6NC52A221 220 +20%,-20% 100 6 -25 to 85 DSS6NC52A271 270 +20%,-20% 100 6 -25 to 85 DSS6NC52A471 470 +20%,-20% 100 6 -25 to 85 DSS6NC52A102 1000 +20%,-20% 100 6 -25 to 85 DSS6NE52A222 2200 +80%,-20% 100 6 -25 to 85 DSS6NZ82A103 10000 +30%,-30% 100 6 -25 to 85 DSS6NF31C223 22000 +80%,-20% 16 6 -25 to 85 Part Number Please refer to Part Numbering for Type and Length of Lead. ■ Equivalent Circuit ■ Insertion Loss Characteristics (Typical) 0 1 2 Insertion Loss (dB) 20 GND 12 11 10 9 8 5 4 3 1 : 22pF 2 : 33pF 3 : 47pF 4 : 100pF 5 : 150pF 6 : 220pF 7 : 270pF 8 : 470pF 9 : 1000pF 10 : 2200pF 11 : 10000pF 12 : 22000pF 40 7 6 60 80 100 No polarity 120 0.1 1 10 100 1000 Frequency (MHz) 111 5 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Built-in Ferrite Beads DSS6 Series Straight Type Capacitance (pF) Rated Voltage (Vdc) Rated Current (A) Operating Temperature Range (°C) DSS6NC52A220 22 +20%,-20% 100 6 -25 to 85 DSS6NC52A330 33 +20%,-20% 100 6 -25 to 85 DSS6NC52A470 47 +20%,-20% 100 6 -25 to 85 DSS6NC52A101 100 +20%,-20% 100 6 -25 to 85 DSS6NC52A151 150 +20%,-20% 100 6 -25 to 85 DSS6NC52A221 220 +20%,-20% 100 6 -25 to 85 DSS6NC52A271 270 +20%,-20% 100 6 -25 to 85 DSS6NC52A471 470 +20%,-20% 100 6 -25 to 85 DSS6NC52A102 1000 +20%,-20% 100 6 -25 to 85 DSS6NE52A222 2200 +80%,-20% 100 6 -25 to 85 DSS6NZ82A103 10000 +30%,-30% 100 6 -25 to 85 DSS6NF31C223 22000 +80%,-20% 16 6 -25 to 85 Part Number Please refer to Part Numbering for Type and Length of Lead. ■ Equivalent Circuit ■ Insertion Loss Characteristics (Typical) (50Ω - 50Ω) 0 2 1 Insertion Loss (dB) 20 GND 12 11 10 9 8 5 4 3 40 7 60 6 80 100 No polarity 120 0.1 1 10 Frequency (MHz) 5 112 100 1000 1 : 22pF 2 : 33pF 3 : 47pF 4 : 100pF 5 : 150pF 6 : 220pF 7 : 270pF 8 : 470pF 9 : 1000pF 10 : 2200pF 11 : 10000pF 12 : 22000pF C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. On-Board Type (DC) EMI Suppression Filters (EMIFILr) Disc Type EMIFILr Broad Type DSN9/DSS9/DST9 Series 4.0 max. 9.5 max. 1.5 max. DS_9 is a basic type EMI suppression filter which can obtain high insertion loss in a wide frequency range. Its 3-terminal structure enables nice high frequency performance. DSS9NP32A222/DSS9NT31H223 are low distortion type for audio circuits. 10.0 max. ■ Features 2.5±0.5 I 1.0±0.5 5.0±0.5 ø0.65 GND DSN9N_Q55B 12.0 max. I Q55 Type : 25.0 min. Q56 Type : 6.0±1.0 Q54 Type : 4.0±0.5 7.5 max. 4.0 max. 1.5 max. 2.5±0.5 I 2.5±0.5 DSS9N_Q55B I Q55 Type : 25.0 min. Q56 Type : 6.0±1.0 Q54 Type : 4.0±0.5 Ferrite bead I 2.5±0.5 5.0±0.5 ø0.65 GND 15.5 max. Ferrite bead *1 I1 1.5 max. 10.5 max. 9.5 max. 5.0±0.5 (in mm) 1.25±0.5 ø0.65 DST9N_Q55B GND (in mm) *1 Bottom of the ferrite beads may not be level with each other. Q55 Type : I=25.0 min. Q52 Type : I1= 6.0±1.0 Q50 Type : I1= 4.0±0.5 (in mm) DSN9 Series Capacitance (pF) Rated Voltage (Vdc) Rated Current (A) Operating Temperature Range (°C) DSN9NC52A271 270 +20%,-20% 100 7 -25 to 85 DSN9NC52A222 2200 +20%,-20% 100 7 -25 to 85 DSN9NC51H223 22000 +50%,-20% 50 7 -25 to 85 DSN9NC51C104 100000 +20%,-20% 16 7 -25 to 85 Part Number 5 Rated current is 6A for taping type. Please refer to Part Numbering for Type and Length of Lead. ■ Equivalent Circuit ■ Insertion Loss Characteristics (Typical) (50Ω - 50Ω) 0 270pF 2200pF Insertion Loss (dB) 20 40 22000pF 100000pF 60 GND No polarity 80 100 0.01 0.1 1 10 Frequency (MHz) 100 1000 113 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Built-in Ferrite Beads DSS9 Series Capacitance (pF) Rated Voltage (Vdc) Rated Current (A) Operating Temperature Range (°C) DSS9NC52A220 22 +20%,-20% 100 7 -25 to 85 DSS9NC52A470 47 +20%,-20% 100 7 -25 to 85 DSS9NC52A101 100 +20%,-20% 100 7 -25 to 85 DSS9NC52A271 270 +20%,-20% 100 7 -25 to 85 DSS9NC52A222 2200 +20%,-20% 100 7 -25 to 85 DSS9NP32A222 2200 +20%,-20% 100 7 -25 to 85 DSS9NC51H223 22000 +50%,-20% 50 7 -25 to 85 DSS9NT31H223 22000 +50%,-20% 50 7 -25 to 85 Part Number Rated current is 6A for taping type. DSS9NP32A222/DSS9NT31H223 are low distortion types for audio IF circuits. Please refer to Part Numbering for Type and Length of Lead. ■ Equivalent Circuit ■ Insertion Loss Characteristics (Typical) 270pF 100pF 47pF 22pF 0 (50Ω - 50Ω) Insertion Loss (dB) 20 2200pF(DSS9NB32A222) 2200pF(DSS9NP32A222) 40 22000pF(DSS9ND31H223) 22000pF(DSS9NT31H223) 60 80 GND No polarity 100 0.01 0.1 1 10 100 1000 Frequency (MHz) With Ferrite Beads DST9 Series Capacitance (pF) Rated Voltage (Vdc) Rated Current (A) Operating Temperature Range (°C) DST9NC52A271 270 +20%,-20% 100 7 -25 to 85 DST9NC52A222 2200 +20%,-20% 100 7 -25 to 85 DST9NC51H223 22000 +50%,-20% 50 7 -25 to 85 Part Number Rated current is 6A for taping type. Please refer to Part Numbering for Type and Length of Lead. ■ Equivalent Circuit ■ Insertion Loss Characteristics (Typical) (50Ω - 50Ω) 0 2200pF 20 270pF Insertion Loss (dB) 5 22000pF 40 60 GND 80 No polarity 100 0.01 0.1 1 10 Frequency (MHz) 114 100 1000 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. On-Board Type (DC) EMI Suppression Filters (EMIFILr) Disc Type EMIFILr Heavy-duty Type DSN9H/DSS9H/DST9H Series 4.0 max. 9.5 max. 1.5 max. DS_9H is a basic type EMI suppression filter which can obtain high insertion loss in a wide frequency range. Its three-terminal structure enables nice high frequency performance. High rated voltage of 250Vdc and wide operating temperature range from -40 degree C to 105 degree C are suitable for high reliability circuits. 10.0 max. ■ Features 2.5±0.5 I 1.0±0.5 5.0±0.5 ø0.65 GND DSN9H_Q55B 12.0 max. I Q55 Type : 25.0 min. Q56 Type : 6.0±1.0 Q54 Type : 4.0±0.5 7.5 max. 4.0 max. 1.5 max. 2.5±0.5 I 2.5±0.5 DSS9H_Q55B I Q55 Type : 25.0 min. Q56 Type : 6.0±1.0 Q54 Type : 4.0±0.5 Ferrite bead I 2.5±0.5 5.0±0.5 ø0.65 GND 15.5 max. Ferrite bead *1 1.25±0.5 I1 1.5 max. 10.5 max. 9.5 max. 5.0±0.5 (in mm) ø0.65 DST9H_Q55B GND Q55 Type : I=25.0 min. Q52 Type : I1= 6.0±1.0 Q50 Type : I1= 4.0±0.5 (in mm) *1 Bottom of the ferrite beads may not be level with each other. (in mm) DSN9H Series Capacitance (pF) Rated Voltage (Vdc) Rated Current (A) Operating Temperature Range (°C) DSN9HB32E220 22 +20%,-20% 250 6 -40 to 105 DSN9HB32E101 100 +20%,-20% 250 6 -40 to 105 DSN9HB32E271 270 +20%,-20% 250 6 -40 to 105 DSN9HB32E222 2200 +20%,-20% 250 6 -40 to 105 Part Number 5 Please refer to Part Numbering for Type and Length of Lead. ■ Equivalent Circuit ■ Insertion Loss Characteristics (Typical) 100pF 0 2200pF 22pF (50Ω - 50Ω) 270pF Insertion Loss (dB) 20 40 60 80 GND No polarity 100 120 0.1 1 10 100 1000 Frequency (MHz) 115 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Built-in Ferrite Beads DSS9H Series Capacitance (pF) Rated Voltage (Vdc) Rated Current (A) Operating Temperature Range (°C) DSS9HB32E220 22 +20%,-20% 250 6 -40 to 105 DSS9HB32E101 100 +20%,-20% 250 6 -40 to 105 DSS9HB32E271 270 +20%,-20% 250 6 -40 to 105 DSS9HB32E222 2200 +20%,-20% 250 6 -40 to 105 Part Number Please refer to Part Numbering for Type and Length of Lead. ■ Equivalent Circuit ■ Insertion Loss Characteristics (Typical) (50Ω - 50Ω) 0 22pF 100pF 270pF 20 Insertion Loss (dB) 2200pF 40 60 80 GND No polarity 100 120 0.1 1 10 Frequency (MHz) 100 1000 With Ferrite Beads DST9H Series Capacitance (pF) Rated Voltage (Vdc) Rated Current (A) Operating Temperature Range (°C) DST9HB32E220 22 +20%,-20% 250 6 -40 to 105 DST9HB32E101 100 +20%,-20% 250 6 -40 to 105 DST9HB32E271 270 +20%,-20% 250 6 -40 to 105 DST9HB32E222 2200 +20%,-20% 250 6 -40 to 105 Part Number Please refer to Part Numbering for Type and Length of Lead. ■ Equivalent Circuit ■ Insertion Loss Characteristics (Typical) (50Ω - 50Ω) 0 100pF 22pF 20 270pF Insertion Loss (dB) 5 2200pF 40 60 80 GND No polarity 100 120 0.1 116 1 10 Frequency (MHz) 100 1000 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. On-Board Type (DC) EMI Suppression Filters (EMIFILr) Lead Type EMIGUARDr (EMIFILr with Varistor Function) Part Numbering Lead Type EMIGUARDr (EMIFILr with Varistor Function) (Global Part Number) VF S V D8 1E 221 T51 B q w e r t y u 6 i o rFeatures qProduct ID Product ID VF EMIGUARDr Lead Type Code Features V with Varistor Function tTemperature Characteristics wStructure Code Structure Code Capacitance Change S Built-in Ferrite Beads Type D8 +20/-30% (Temperature Range : -40˚Cb+105˚C) R with Resistance D3 +20/-30% (Temperature Range : -25˚Cb+85˚C) Code Style eStyle yRated Voltage 3 6 Size is expressed by a figure Code Rated Voltage 1E 25V 1B 12V 9 uCapacitance Expressed by three figures. The unit is in pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. iLead Type/oPackaging Lead Length* Packaging 25.0mm min. Bulk 18.5+/-1.0mm Ammo Pack Q55B 25.0mm min. Bulk Q91J 20.0+/-1.0mm Code T51B U31A Q92J Q93J Lead Type Incrimp Straight 16.5+/-1.0mm Paper Reel (ø320mm) Series VFR3/VFS6 VFS9 18.5+/-1.0mm *Lead Distance between Reference and Bottom Planes except Bulk. 5 117 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. On-Board Type (DC) EMI Suppression Filters (EMIFILr) Lead Type EMIGUARDr (EMIFILr with Varistor Function) VFR3V/VFS6V/VFS9V Series for Semiconductor Protection VFR3V Series ■ Features 2.3 max. The VFR3V series is designed for ESD surge protection of IC. It efficiently absorbs ESD surges rushed into IC's I/O terminals. 5.0 max. 8.0 max. No.1 Pin Indicator (Surge entrance side) ■ Applications Elimination of noise and protection of semiconductors in office equipment, including computers and peripheral equipment, copy machines, and communication terminals. 25.0 min. 2.5±0.5 5.0±0.5 (1) (2) ø0.45±0.1 (3) (in mm) Part Number VFR3VD31E131 Rated Voltage (Vdc) Varistor Voltage (Vdc) Capacitance (pF) Rated Current (mA) Peak Pulse Current (A) Operating Temperature Range (°C) 25 50 +20%,-20% 130 +20%,-20% 20 15 -25 to 85 Please refer to Part Numbering for Type and Length of Lead. ■ Insertion Loss Characteristics (50Ω - 50Ω) 0 10 Insertion Loss (dB) 20 30 40 50 60 5 70 118 5 10 100 Frequency (MHz) 1000 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. for Signal-Line VFS6V Series 2.54 max. 8.0 max. 10.5 max. ■ Features The VFS6V series is designed for surge protection of signal line. It protects electric circuit from surges such as static electricity and suppresses EMI noise. Built-in ferrite bead gives excellent EMI suppression. ■ Applications 5.0±0.5 ø0.6 Elimination of noise and protection of electric circuits in office equipment, including computers and peripheral equipment, copy machines, and communication terminals. VFS6VD81E221 25.0 min. *2 2.5±0.5 Part Number *1 GND (in mm) *1 There may be a hole on the top of ferrite beads, which cause no characteristics deterioration. *2 Bottom of the ferrite beads may not be level with each other. Rated Voltage (Vdc) Varistor Voltage (Vdc) Capacitance (pF) Rated Current (A) Peak Pulse Current (A) Operating Temperature Range (°C) 25 50 +20%,-20% 220 +20%,-20% 6 100 -40 to 105 Please refer to Part Numbering for Type and Length of Lead. ■ Insertion Loss Characteristics (50Ω - 50Ω) Insertion Loss (dB) 0 20 40 60 10.0 100.0 1000.0 Frequency (MHz) 5 119 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. for Large-Current VFS9V Series 12.0 max. 1.5 max. The VFS9V series is designed for surge protection of the power supply line. It protects electric circuits from surges such as static electricity and suppresses EMI noise. Its large capacitance value enables high insertion loss for EMI noise. 7.5 max. 10.5 max. ■ Features Ferrite bead *1 25.0 min. 2.5±0.5 5.0±0.5 2.5±0.5 ø0.65 ■ Applications GND For circuit protection and noise suppression in electronics equipment such as computers and DC motors, and in electronics systems installed in cars such as car audio equipment and engine controllers. Part Number VFS9VD31B223 (in mm) *1 Bottom of the ferrite beads may not be level with each other. Rated Voltage (Vdc) Varistor Voltage (Vdc) Capacitance (pF) Rated Current (A) Operating Temperature Range (°C) 12 22 +20%,-20% 22000 +50%,-20% 7 -40 to 100 Rated current: 6A (Taping Type)/7A (Bulk Type) Please refer to Part Numbering for Type and Length of Lead. ■ Insertion Loss Characteristics ■ Voltage-Current Characteristics (50Ω - 50Ω) 0 300 20 40 100 60 Current (mA) Attenuation (dB) 200 80 100 0.1 0.5 1 5 10 50 100 500 1000 −30 −40 −20 −10 0 10 −100 Frequency (MHz) −200 5 −300 Voltage (V) 120 20 30 40 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. EMI Suppression Effect Noise Suppression Effect of VFR/VFS Series !Example of IC Protection [Test Circuit] " Testing Method 1. Put ESD surge to IC (7404 family) input terminal with ESD simulator based on IEC 801-2. 2. Check IC's operation. 3. If IC's operation is normal, increase ESD voltage in 1kV step. 4. Continue above steps 1 to 3 till IC's operation becomes abnormal. VFR3V 330Ω 150pF Test IC ,,, ,,, ESD Simulator " Result (Result) Breakdown level [kV] 30min. Without VFR3V With use VFR3V 25 20 15 10 5 0 !Example of EMI Suppression Effect LS ALS AS C IC’s Family HC AC [Test Circuit] ANT Signal 1MHz F ACO4 Noise Radiation Cable (50cm) Shield Type of Filter 5 Description EMI Suppression Effect Before Countermeasures (No Filters) Noise Level [dBµV/m] 70 60 50 40 30 20 30 90 150 210 270 330 270 330 Frequency [MHz] Use VFR3VD31E131T51 Noise Level [dBµV/m] 70 60 50 40 30 20 30 90 150 210 Frequency [MHz] 121 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. EMI Suppression Effect Noise Suppression Effect of VFR/VFS Series !Features (VFS9V) Items Test methods Overload 1.4 times the varistor voltage (V1) is applied for 5 minutes at room temperature. Surge Test (1) At room temperature. Surges are applied are 105 times every 2 seconds. Then after 1 or 2 hours, the sample is measured. Rated values 400V Items Specifications Rated Capacitance Change WithinT15% 0.8Ω Insulation Resistance 500kΩ min 2W Rated of Change in Varistor Voltage V1* WithinT15% Voltage Rate 1.30 max 0.47µF Surge Test (2) At room temperature. Capacitor "C" is changed with 70V, then dischanged to apply the voltage to the sample. Tested once (resuming JASO A-1). High Temperature Load At a temperature of 85±3D. The varistor voltage V1 is continuously applied to the sample for 1000 to 1024 hours. Then it is left at room temperature, for 4 to 24 hours before measuring. 70V C C=110mF *V1 : Voltage when 1mA is applied !Pulse-Voltage Breakdown Characteristic (VFS9V) The VFS9V EMIGUARDr use a self healing varistorcapacitor, so that it can be used under a 500 to 600V surge which would break conventional disk type EMI filters. As shown in figure below the EMIGUARDr withstands 2000V impulses applied 1000 times. 50Ω 50Ω VFS9V Residual Rate [%] 100 Capacitance:0.022µF with varistor function 3-terminal capacitor Capacitance:0.022µF with no varistor function 50 5 V 800ns Residual ratio when 1000 pulses are applied 0 0 500 1000 1500 Pulse Voltage Applied [V] 2000 104 Insulation resistance Change rate of varistor voltage +10 103 0 102 −10 10 1 −30 0 30 60 Temperature [D] Change Rate of Varistor Voltage [%] Insulation Resistance [MΩ] !Temperature Characteristics of Varistor Voltage-Insulation Resistance (VFS9V) 90 Continued on the following page. 122 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please C31E9.pdf 03.3.12 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. EMI Suppression Effect Noise Suppression Effect of VFR/VFS Series Continued from the preceding page. !Noise Absorption Effect of EMIGUARDr Type of Filter EMI Suppression Effect Description : 200V/div : 10ns/div Waveform when EMIGUARDr is not used. (Surge from a noise simulator) : 200V/div : 10ns/div Waveform after the noise passed through EMIGUARDr. Little noise is recorded. 100 90 80 without EMIGUARDr 20 10 0% with EMIGUARDr D 223S 12-22 100 90 80 20 10 0% !Comparative Data 1. Absorption of quick-rising, high-frequency noise (10ns/div, 100V/div) Type of Filter EMI Suppression Effect Description 2000V 50ns without Filters Noise wave applied As with the 2-terminal capacitor Conventional varistor 100 90 80 5 20 10 0% 2-terminal capacitor (with varistor function) 100 90 80 20 10 0% VFS9V 100 90 80 20 10 0% The 2-terminal capacitor is influenced by lead line inductance, leaving behind some of the rising and falling edges. The residual noise can cause the system to malfunction. The 3-terminal structure eliminates most of the lead line inductance. This allows the VFS9V to completely absorb the rising and falling edges of the applied pulses. Continued on the following page. 123 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please C31E9.pdf 03.3.12 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. EMI Suppression Effect Noise Suppression Effect of VFR/VFS Series Continued from the preceding page. 2. Absorption of wide-pulse noise (50ns/div, 200V/div) Type of Filter EMI Suppression Effect Description 1300V 200ns without Filters Noise wave applied 2-terminal capacitor 100 90 80 In capacitors the voltage of the residual surge (1300V) is higher than that of the above example. The wave height is almost the same as the original. 20 10 0% 3-terminal capacitor (with ferrite bead) 100 90 80 20 10 0% VFS9V 100 90 80 20 10 0% 5 124 Conventional EMI filters do not work for wide-pulse noise because capacitors are saturated. In this example, the residual 1200V surge can cause the system to breakdown. Bypassing the high voltage to the ground, voltage can be surppressed. C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. On-Board Type (DC) EMI Suppression Filters (EMIFILr) Block Type EMIFILr BNX Series BNX Series 12.0±0.5 13 max. 5.0±0.5 3.5±1.0 0.8 ±0.1 ø0.8 18 max. The block type "EMIFIL" BNX series incorporates through-type capacitor, monolithic chip capacitors and bead. The BNX is high performance for use in DC power circuits. 11.0±0.5 ø0.8 0.6 ±0.1 ø0.8 2.5±0.2 ■ Features 7.5±0.2 1. The filter enables obtaining high insertion loss in wide frequency ranges from 0.5MHz to 1GHz. 2. The only one filter block enables noise suppression of both the positive and negative lines. 3. There are no connection routes in the current circuits, thus ensuring highly reliable performance. 2.5±0.2 2.5±0.2 PSG : Power supply ground CG : Load circuit ground CB : Load circuit + Bias CB CG BNX002/BNX003 CG PSG (in mm) B 12.0±0.5 13.5 max. 3.5±1.0 Noise elimination from DC power sources in a variety of switching power sources, engine control units, digital equipment and computer terminals. 0.8 ±0.1 ø1.0 5.0±0.5 ■ Applications 18.5 max. 11.0±0.5 ø1.0 ø1.0 0.6 ±0.1 2.5±0.2 7.5±0.2 2.5±0.2 2.5±0.2 BNX005-01 PSG : Power supply ground CG : Load circuit ground CB : Load circuit + Bias CB CG BNX005 CG PSG (in mm) B Rated Voltage (Vdc) Withstand Voltage (Vdc) Rated Current (A) Insulation Resistance (min.) (M ohm) Insertion Loss BNX002-01 50 125 10 100 1MHz to 1GHz:40dB min.(20 to 25°C line impedance=50 ohm) BNX003-01 150 375 10 100 5MHz to 1GHz:40dB min.(20 to 25°C line impedance=50 ohm) BNX005-01 50 125 15 100 1MHz to 1GHz:40dB min.(20 to 25°C line impedance=50 ohm) Part Number 5 Operating Temperature Range : -30°C to 85°C ■ Equivalent Circuit ■ Insertion Loss Characteristics (Typical) (50Ω - 50Ω) 0 BNX003-01 20 L3 C2 B L2 CB (2) C1 CG (4) (3) PSG (1)-(4) : Terminal Number PSG : Power Supply Ground CG : Circuit Ground CB : Circuit+B Insertion Loss (dB) L1 (1) BNX002-01 40 (BNX005-01) 60 80 100 0.001 0.01 0.1 1 10 100 1000 Frequency (MHz) 125 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please C31E9.pdf 03.3.12 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. EMI Suppression Effect Noise Suppression Effect of BNX Series !Suppression of DC Side Ripple of the Switching Power Supply [Testing Circuit] BNX002-01 +5V Switching Power Supply Type of Filter EMI Suppression Effect CG Description High frequency noise, max. 0.5V, can be seen. When BNX002 is not used +5.0V → 50µs/div 0.2V/div Noise can be almost suppressed by BNX002. When BNX002 is used 5 126 +5.0V → 50µs/div 0.2V/div C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. On-Board Type (DC) EMI Suppression Filters (EMIFILr) Common Mode Choke Coils Part Numbering Common Mode Choke Coils (Global Part Number) PL T q w e r t 09 H N 200 y 3R0 u 1 B yInductance qProduct ID Product ID PL P i o !0 Common Mode Choke Coils wType Code Type T DC Type eApplications Code Applications 09 for DC Line High-frequency Type Expressed by three figures. The unit is micro-henry (µH). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. If there is a decimal point, it is expressed by the capital letter "R". In this case, all figures are significant digits. If inductance is less than 0.1 µH, the inductance code is expressed by a combination of two figures and the capital letter "N", and the unit of inductance is nano-henry (nH). The capital letter "N" indicates the unit of "nH", and also expresses a decimal point. In this case, all figures are significant digits. uRated Current Expressed by three figures. The unit is in amperes (A). A decimal point is expressed by the capital letter "R". In this case, all figures are significant digits. rStructure Code Structure H Core Horizontal Type tFeatures Code Features N General Use iWinding Mode Code Winding Mode P Aligned Winding Type oLead Dimensions Code Lead Dimensions 1 5mm !0Packaging Code Packaging B Bulk Series All series 5 127 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. On-Board Type (DC) EMI Suppression Filters (EMIFILr) 13 max. Common Mode Choke Coils (for DC Line) PLT09H Series The PLT09H series is common mode choke coil for DC line. It is effective against the common mode noise that can cause radiative noise in power supply lines and interface lines. The additional normal mode inductance enables high suppression effect to radiation noise. 5±1 8 max. 14 max. 5±0.5 ■ Features 1. This is a wide frequency range type, applicable in applications ranging from a few MHz to several 100MHz. 2. It features a low-profile design. Soldered (1) (2) (4) (3) ø0.6 max. 10±0.5 (in mm) ■ Applications 1. Noise suppression of SW power supply, DC-DC converter. 2. DC power lines in AC adapter of Portable equipment. Part Number Common Mode Inductance (µH) Rated Current (A) Rated Voltage (Vdc) Withstand Voltage (Vdc) PLT09HN2003R0P1 20 min. 3 50 125 Operating Temperature Range : -40°C to 85°C ■ Equivalent Circuit ■ Insertion Loss Characteristics (Typical) 0 (1) (2) 5 (3) (4) No polarity Insertion Loss (dB) 5 10 15 20 25 30 0.1 1 10 Frequency (MHz) 128 100 1000 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. On-Board Type (DC) EMI Suppression Filters (EMIFILr) Microwave Absorbers Part Numbering Microwave Absorber (Global Part Number) EA 1026 A 160 M 200 200 q w e r t y u tUnit of Dimension qProduct ID Product ID EA Microwave Absorber One capital lettler expresses Unit of dimension (y) and Dimensions Length (u). wSheet Type Code Sheet Type 10pp Iron carbonyl type 2070 Metal Flake Powder (non Halogen type) 2100 Metal Flake Powder (UL certified type) Code Unit of Dimension M in mm (Standard) C in cm (Standard) Standard shape is a rectangle. Please contact us for other shapes. yDimension (Length) eAdhesive Tape Type Expressed by 3 digits including the first decimal place. Code Adhesive Tape Type A Standard tape type B Thin Adhesive tape type L No tape type U UL certified type rSheet Thickness uDimension (Width) Expressed by 3 digits including the first decimal place. Ex.) Code Dimension (Length g Width) M300150 30.0g15.0 mm C150100 15.0g10.0 cm Expressed by 3 digits including the second decimal place in mm. Ex.) Code Sheet Thickness 020 0.20mm 6 129 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please C31E9.pdf 03.3.12 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. On-Board Type (DC) EMI Suppression Filters (EMIFILr) Microwave Absorbers EA10/EA20/EA21 Series EA10 Series ■ Features 1. Excellent elasticity and durability with silicon rubber. 2. Suitable for prevention of abnormal oscillation in high frequency modules, suppression of spurious spectra and prevention interference between circuits. 3. Holds easily in equipment with adhesive tape. Applicable Frequency Thickness (mm) Flame Resistance Halogen Operating Temperature Range EA1026A100 20.0 GHz (Typ.) 1.0 (Typ.) - Halogen Free -40 to +80 °C EA1026A160 11.5 GHz (Typ.) 1.6 (Typ.) - Halogen Free -40 to +80 °C EA1026A180 10.0 GHz (Typ.) 1.8 (Typ.) - Halogen Free -40 to +80 °C EA1046A180 5.8 GHz (Typ.) 1.8 (Typ.) UL94V-0 Halogen Free -40 to +80 °C EA1075A270 2.5 GHz (Typ.) 2.7 (Typ.) UL94V-0 Halogen Free -40 to +80°C Part Number ■ Refrection Loss 0 Reflection Loss (dB) 5 10 15 EA1026A100 20 25 EA1026A180 EA1075A270 EA1026A160 30 EA1046A180 35 40 0 2 4 6 8 10 12 Frequency(GHz) 6 130 14 16 18 20 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please C31E9.pdf 03.3.12 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. EA20/21 Series ■ Features 1. Magnetically-shielded high-micro and high-loss characteristics can suppress noise in a wide frequency band for digital equipment. 2. Thin (0.2mm-1.0mm) and flexible sheet makes easy handling in assembly process. 3. Holds easily in equipment with adhesive tape. 4. EA20xx series : Non Halogen type EA21xx series : UL94V-0 certified material is used. Applicable Frequency Thickness (mm) Flame Resistance Halogen Operating Temperature Range EA2070A020 0.1 - 3.0GHz (Typ.) 0.2 (Typ.) - Halogen Free -40 to +105 °C EA2070A050 0.1 - 3.0 GHz (Typ.) 0.5 (Typ.) - Halogen Free -40 to +105 °C EA2070A100 0.1 - 3.0 GHz (Typ.) 1.0 (Typ.) - Halogen Free -40 to +105 °C EA2070B005 0.1 - 3.0 GHz (Typ.) 0.05 (Typ.) - Halogen Free -40 to +105 °C EA2070B010 0.1 - 3.0 GHz (Typ.) 0.10 (Typ.) - Halogen Free -40 to +105 °C EA2070B013 0.1 - 3.0 GHz (Typ.) 0.13 (Typ.) - Halogen Free -40 to +105 °C EA2070B020 0.1 - 3.0 GHz (Typ.) 0.2 (Typ.) - Halogen Free -40 to +105 °C EA2070B050 0.1 - 3.0 GHz (Typ.) 0.5 (Typ.) - Halogen Free -40 to +105 °C EA2100A020 0.1 - 3.0 GHz (Typ.) 0.2 (Typ.) UL94V-0 - -40 to +105 °C EA2100A050 0.1 - 3.0 GHz (Typ.) 0.5 (Typ.) UL94V-0 - -40 to +105 °C EA2100A100 0.1 - 3.0 GHz (Typ.) 1.0 (Typ.) UL94V-0 - -40 to +105 °C EA2100B020 0.1 - 3.0 GHz (Typ.) 0.2 (Typ.) UL94V-0 - -40 to +105 °C EA2100B050 0.1 - 3.0 GHz (Typ.) 0.5 (Typ.) UL94V-0 - -40 to +105 °C EA2100B100 0.1 - 3.0 GHz (Typ.) 1.0 (Typ.) UL94V-0 - -40 to +105 °C Part Number ■ Magnetic Permeability-Reluctance (Typical) 20 16 µ" 12 8 4 0 0.1 1.0 Frequency (GHz) 10 6 131 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please C31E9.pdf 03.3.12 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Chip EMIFILr !Caution/Notice ■ !Caution (Soldering and Mounting) Give special attention when mounting chip "EMIFIL" BLM_P/NFM_P series close to other products that radiate heat. The excessive heat by other products may cause deterioration of the insulation resistance and result in excessive heat or fire. ■ Notice (Storage and Operating Conditions) < Operating Environment > Do not use products in a chemical atmosphere such as chlorine gas, acid or sulfide gas. < Storage and Handling requirements > 1. Storage Period BLM/BLA/VFM41R/DLP31S/DLM2HG series should be used within 6 months, the other series should be used within 12 months. Solderability should be checked if this period is exceeded. 2. Storage conditions (1) Storage temperature : -10 to 40 degree C Relative humidity : 30 to 70% Avoid sudden changes in temperature and humidity. (2) Do not store products in a chemical atmosphere such as chlorine gas, acid or sulfide gas. ■ Notice (Rating) Noise suppression levels resulting from MURATA's EMI suppression filters "EMIFIL" may vary, depending on the circuits and ICs used, type of noise, mounting pattern, lead wire length, mounting location, and other operating conditions. Be sure to check and confirm in advance the noise suppression effect of each filter, in actual circuits, etc. before applying the filter in a commercial-purpose equipment design. ■ Notice (Soldering and Mounting) < Operating Environment > Do not use products in a chemical atmosphere such as chlorine gas, acid or sulfide gas. < Storage and Handling requirements > 1. Storage Period Products inspected by Murata over 12 months ago should be examined prior to use. Date can be confirmed with inspection No. marked on the container. Solderability should be checked if this period is 6 132 exceeded. (NFM41P/55P, VCM series should be used within 6 months.) 2. Storage conditions (1) Storage temperature : -10 to 40 C. Relative humidity : 30 to 70% Avoid sudden changes in temperature and humidity. (2) Do not store products in a chemical atmosphere such as chlorine gas, acid or sulfide gas. catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please C31E9.pdf 03.3.12 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Lead Type EMIFILr !Caution/Notice ■ !Caution (Rating) Do not use products beyond the rated current and the rated voltage, or deterioration of the insulation resistance may result in excessive heat or fire. ■ !Caution (Soldering and Mounting) Mounting holes should be designed as specified in these specifications. Other design than shown in these specifications may cause cracks in ceramics which may lead to smoking or firing. ■ Notice (Storage and Operation Condition) < Operating Environment > 1. Do not use products in a chemical atmosphere such as chlorine gas, acid or sulfide gas. 2. Do not use products near water, oil or organic solvents. Avoid environment where dust or dirt may adhere to product. < Concerned to "EMIGUARD" > VFR3V series is designed only to absorb electro-static surges. Do not use this product to absorb large energy surges such as lightning or switching related surges. < Storage and Handling Requirements > 1. Storage Period Use the products within 12 months after delivery; solderability should be checked if this period is exceeded. 2. Storage conditions (1) Storage temperature : -10 to 40 degree C Relative humidity : 30 to 70% Avoid sudden changes in temperature and humidity. (2) Do not store products in a chemical atmosphere such as chlorine gas, acid or sulfide gas. (3) When restoring taping type (BL01RN1R1F1J), please attach the Spacer between flanges of reel. The Spacer is corrugated paper which is attached when shipping. ■ Notice (Rating) Noise suppression levels resulting from MURATA's EMI suppression filters "EMIFIL" may vary, depending on the circuits and ICs used, type of noise, mounting pattern, lead wire length, mounting location, and other operating conditions. Be sure to check and confirm in advance the noise suppression effect of each filter, in actual circuits, etc. before applying the filter in a commercial-purpose equipment design. 6 133 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. EMIFILr (Soldering and Mounting) 1. Standard Land Pattern Dimensions The capacitor type Chip EMIFILr (NFp series) / Chip EMIGUARDr (VFM series) suppress noise by conducting the highfrequency noise element to ground. Therefore, to obtain maximum performance from these filters, the ground pattern should be made as large as possible during the PCB design stage. As shown in the right, one side of the PCB is used for chip mounting, and the other is used for grounding. Small diameter feedthrough holes are then used to connect the grounds on each side of the PCB. This reduces the highfrequency impedance of the grounding and maximizes the filter's performance. Please contact us if using a thinner land pad than 18µm for NFM55P. Land Pattern + Solder Resist Land Pattern Solder Resist oReflow and Flow BLMppP d (pattern) BLM Series (Except BLMppP series) c c BLM03 BLM15 BLM18 BLM21 BLM31 BLM41 (in mm) a a b b Type Soldering ∗ BLM03 Reflow ∗ BLM15 Reflow 0.4 Flow BLM18 (except 18PG type) b a 0.2-0.3 0.6-0.9 1.2-1.4 2.2-2.6 0.7 Reflow BLM21 (except 21PG type) 1.8-2.0 3.0-4.0 1.2 Flow/ Reflow BLM31 (except 31PG type) c 0.5 Rated Current Soldering a (A) 0.7 0.5-1.5 0.3 BLM18PG 1.2 BLM41 (except 41Pp type) BLM21PG BLM31PG 0.7 0.7 0.7 1.2 0.7 1.5 1.0 1.0 1.0 2 1.2 1.0 1.0 2.4 1.2 1.0 6.4 3.3 1.65 1.2 1.2 1.2 2.4 1.2 1.2 6.4 3.3 1.65 1.2 1.2 1.2 2.4 1.2 1.2 6.4 3.3 1.65 1.2 3.0-4.0 1.0 3 Flow/ Reflow 3 2.0 4.2-5.2 6 Flow Mounting in High Density for BLM31/41 d 3 3.0 5.5-6.5 6 2.5 Pitch c b 1.2 1-2 BLM41Pp Land pad thickness and dimension d 18µm 35µm 70µm 1.5/2 ∗BLM03/15 is specially adapted for reflow soldering. a c 0.7 2 6 5.5-6.5 3.0 b 0.7 Flow 2.2-2.6 0.7 1.2 0.7 Reflow 1.8-2.0 2.4 3 1.0 4.2-5.2 2.0 Type e Type a b c d e BLM31 2.0 4.2-5.2 1.2 1.3 1.35 BLM41 3.0 5.5-6.5 1.2 1.8 1.5 oDo not apply narrower pattern that listed above to BLMppP. Narrow pattern can cause excessive heat or open circuit. 6 0.5 0.5 Pitch 0.25 0.8 oReflow and Flow BLA31 2.8 2.2-2.6 oReflow soldering BLA2A 1.75 1.5 BLA2A BLA31 0.8 Pitch 0.4 • If there are high amounts of self-heating on pattern, the contact points of PCB and part may become damaged. Continued on the following page. 134 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. EMIFILr (Soldering and Mounting) Continued from the preceding page. Land Pattern + Solder Resist Land Pattern Solder Resist Reflow Soldering NFM18C/NFM18P/NFL18ST NFL18SP Small diameter thru hole ø0.3 0.8 0.4 0.6 1.2 NFM18 (in mm) 0.4 1.2 0.8 0.4 0.6 1.0 2.2 0.4 1.0 2.0 The chip EMI filter suppress noise by passing the highfrequency noise to ground. Therefore, to get noise suppression effectively, it is recommended to put through holes (ø0.3 mm) into the center and both sides of groundpattern to connect to ground-plane. • NFp18, NFp21 are specially adapted for reflow soldering. o Reflow Soldering o Flow Soldering Chip mounting side Back side Chip mounting side Ground pattern Small diameter thru hole ø0.4-ø0.6 Small diameter thru hole ø0.4-ø0.6 Ground pattern b a b c d c Size (mm) Part Number NFM21C/NFM21P NFR21G/NFL21S NFM3DC NFM3DP NFM41C NFM41P VFM41R g 0.6 e f g Connect to ground pattern of mounting side a a b c d 0.8 1.4 2.6 0.6 1.4 2.5 4.4 1.0 2.0 3.5 6.0 1.2 2.0 3.5 6.0 1.2 Connect to ground pattern of mounting side Size (mm) Part Number a NFM3DC c d e f g 1.0 1.4 2.5 4.4 1.0 2.0 2.4 NFM3DP NFM41C 1.5 2.0 3.5 6.0 1.2 2.6 3.0 NFM41P 1.5 2.0 3.5 6.0 1.2 2.6 3.0 VFM41R o Reflow Soldering NFA31G/31C b o Reflow and Flow NFW31S o Reflow Soldering NFE31P Chip mounting side 2.6 Back side Small diameter thru hole ø0.4-ø0.6 Connect to ground pattern of mounting side 6 0.3 0.8 Pitch 3.8 3.0 R0.1 to R0.2 is preferred to obtain high voltage withstanding 2.6 3.0 1.0 0.4 1.0 2.2 NFA31G NFA31C NFW31S NFE31P Back side d NFM21 NFM3D NFM41 NFR21G NFL21S VFM41R Ground pattern 0.6 1.2 2.2 4.2 Continued on the following page. 135 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. EMIFILr (Soldering and Mounting) Continued from the preceding page. Land Pattern + Solder Resist Land Pattern Solder Resist o Flow Soldering (Except NFE61H3321) 3.0 1.6 2.6 3.0 Connect to ground pattern of mounting side Connect to ground pattern of mounting side Ground pattern 1.5 3.8 4.8 9.0 Ground pattern 2.0 4.8 8.8 oReflow and Flow DLM2HG DLP31D DLP31S 0.7 2.8 0.7 0.8 2.1 2.0 1.2 0.4 DLM2HG DLP31S DLP31D DLP11S DLW21S DLW21H DLW31S DLW5AH DLW5BS Small diameter thru hole ø0.4-ø0.6 3.2 3.6 Small diameter thru hole ø0.4-ø0.6 Back side Chip mounting side Back side 0.6 1.2 Chip mounting side 3.6 o Reflow Soldering 2.2-2.6 NFE61P NFE61H (in mm) 1.0 4.0 1.0 0.6 1.0 0.8 pitch 0.4 oReflow Soldering DLW21/DLW31S 0.3 ∗1 d 0.85 0.55 0.3 c ∗2 DLP11S ∗3 0.55 a 1.95 b Series 0.9 2.9 5.5 4.7 6 3.3 1.3 DLW5AH/5BS a b c d DLW21S/H 0.8 2.6 0.4 1.2 DLW31S 1.6 3.7 0.4 1.6 ∗ 1 : If the pattern is made with wider than 1.2mm (DLW21) / 1.6mm (DLW31S) it may result in components turning around, because melting speed is different. In the worst case, short circuit between lines may occur. ∗ 2 : If the pattern is made with less than 0.4mm, in the worst case, short circuit between lines may occur due to spread of soldering paste or mount placing accuracy. ∗ 3 : If the pattern is made with wider than 0.8mm (DLW21) / 1.6mm (DLW31S), the bending strength will be reduced. With gild pattern, excess soldering heat may disolve metal of a copper wire. Continued on the following page. 136 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. EMIFILr (Soldering and Mounting) Continued from the preceding page. 2. Solder Paste Printing and Adhesive Application When reflow soldering the chip EMI suppression filter, the printing must be conducted in accordance with the following cream solder printing conditions. If too much solder is applied, the chip will be prone to damage by mechanical and thermal stress from the PCB and may crack. In contrast, if too little solder is applied, there is the potential that the termination strength will be insufficient, creating the potential for detachment. Standard land dimensions should be used for resist and copper foil patterns. When flow soldering the EMI suppression filter, apply the adhesive in accordance with the following conditions. If too much adhesive is applied, then it may overflow into the land or termination areas and yield poor solderability. In contrast, if insufficient adhesive is applied, or if the adhesive is not sufficiently hardened, then the chip may become detached during flow soldering process. (in mm) Series BLM BLA Solder Paste Printing Adhesive Application oEnsure that solder is applied smoothly to a minimum height of 0.2mm to 0.3mm at the end surface of the part. oCoat the solder paste a thickness: 100-150µm: BLM03 100-200µm: BLM15/18/21/31/41, BLA Coating amount is illustrated in the following diagram. Chip Solid Inductor a:20µm−70µm b:30µm−35µm c:50µm−105µm a 0.2−0.3mm min c oUse H60A solder for pattern printing. oCoat the solder paste a thickness: 100-150µm: NFM18/21/3D,NFR, NFL 100-200µm: NFM41,VFM NFM21C/21P NFR21G/NFL21S 0.6 1.2 0.6 0.4 0.4 1.0 2.2 Apply 0.1mg for NFM41C/41P/VFM and 0.06mg for NFM3DC/3DP of bonding agent at each chip. Do not cover electrodes. 0.6 1.9 NFL18SP NFM18C/18P NFL18ST 0.4 1.2 Bonding agent 0.6 1.4 0.4 1.0 Coating position of bonding agent 2.6 2.0 NFM41C/41P/VFM 0.8 2.0 1.0 0.6 0.6 NFM3DC/3DP 1.0 2.5 3.9 2.6 NFM NFR NFL VFM Bonding agent Land PCB b 1.5 3.5 5.5 6 o Use H60A solder for pattern printing. oCoat the solder paste a thickness: 100-200µm NFA31G/NFA31C 0.6 0.4 1.0 2.6 2.2 NFA 0.3 0.8pitch Continued on the following page. 137 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please C31E9.pdf 03.3.12 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. EMIFILr (Soldering and Mounting) Continued from the preceding page. (in mm) Series Adhesive Application NFW31S Series Apply 0.2mg of bonding agent at each chip. 2.6 0.6 oUse H60A solder for pattern printing. oCoat the solder paste a thickness: 150-200µm 1.0 NFW31S NFE31P Solder Paste Printing 0.6 2.2 4.2 Coating positon of bonding agent Apply 1.0mg of bonding agent at each chip. oUse H60A solder for pattern printing. oCoat the solder paste a thickness: 150-200µm 1.6 2.6 1.2 3.2 0.6 NFE61P NFE61H Bonding agent 1.5 4.8 8.8 DLP DLW DLM Bonding agent oUse H60A solder for pattern printing. oCoat the solder paste a thickness: 100-150µm: DLW21S/21H/31S/DLP11S 150-200µm: DLP31D/31S, DLM2HG, DLW5AH/5BS DLW21S/DLW21H/DLW31S DLP31S/DLM2HG Apply 0.3mg of bonding agent at each chip. DLP31D DLP31S d d c c DLP11S/31S 1.5 4.8 9.0 Bonding agent c a b a b a Series a b c Series d a b c Coating Position of Bonding Agent d DLP11S 0.7 0.55 0.3 0.55 DLW21S/H 0.8 2.6 0.5 1.2 DLP31S 1.0 0.6 0.7 2.1 DLW31S 1.6 3.7 0.4 1.6 Coating Position of Bonding Agent DLM2HG DLP31D 0.4 1.0 0.8 1.0 Coating Position of Bonding Agent 6 0.8 DLM2HG DLW5AH/5BS 2.0 1.2 0.4 5.5 2.9 0.9 4.7 3.3 1.3 1.0 4.0 Continued on the following page. 138 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. EMIFILr (Soldering and Mounting) Continued from the preceding page. oAllowable Flow Soldering Temperature and Time 280 270 w Temperature [°C] 3. Standard Soldering Conditions (1) Soldering Methods Use flow and reflow soldering methods only. Use standard soldering conditions when soldering chip EMI suppression filters chip varistor. In cases where several different parts are soldered, each having different soldering conditions, use those conditions requiring the least heat and minimum time. (2) Soldering Temperature and Time To prevent external electrode solder leaching and performance deterioration, solder within the temperature and time combinations illustrated by the slanted lines in the following graphs. If soldering is repeated, please note that the allowed time is the accumulated time. e 250 r q 240 230 0 5 10 15 20 25 30 Time [s] q NFE61P/H(Except NFE61HT332) w BLM(Except BLM03/15), BLA31 e DLM2HG, DLP31D/S r VFM41R, NFM3DC/P, NFM41C/P, NFW31S oAllowable Reflow Soldering Temperature and Time 280 270 Temperature [°C] Solder : H60A H63A solder(JIS Z 3238) Flux : o Use Rosin-based flux (when using RA type solder, clean products sufficiently to avoid residual flux. o Do not use strong acidic flux (with chlorine content exceeding 0.20wt%) o Do not use water-soluble flux. 260 q 260 w 250 240 e r 230 0 20 30 40 50 60 70 80 90 Time [s] q NFE31P/NFE61P/H w BLM/BLA e DLM2HG, DLP31D/S, DLP11S r NFM, NFL, NFA, NFR, HFW31S, DLW, VFM41R Continued on the following page. 6 139 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. EMIFILr (Soldering and Mounting) Continued from the preceding page. (3) Soldering Conditions oFlow Solder cooling Soldering Gradual (in air) Pre-heating Temperature [°C] 300 Max. Temp. 250°C 250 200 150 100 50 0 60s Min. T Pre-heating Soldering Soldering (150°C) Time(T) Temp.(C) Series BLM(Except BLM03/15), BLA31 10s max. NFM3DC/P, NFM41C/P, 60s min. NFW31S, NFE61P/H*, DLM2HG, DLP31D/31S 5s max. 250 VFM *Except NFE61HT332 oReflow Solder Pre-heating (4) Reworking with Solder Iron The following conditions must be strictly followed when using a soldering iron. Pre-heating : 150°C 60 s min. Soldering iron power output : 30W max. Temperature of soldering iron tip / Soldering time : 280°C max./10s max. or 300°C max./3s max.* *NFE31PT152Z1E9/VFM : 280°C max./10 s max. only BLM : 350°C max./3 s max. Do not allow the tip of the soldering iron to directly contact the chip. For additional methods of reworking with to soldering iron, please contact Murata engineering. 6 4. Cleaning Following conditions should be observed when cleaning chip EMI filter. (1) Cleaning Temperature : 60°C max. (40°C max. for alcohol type cleaner) (2) Ultrasonic Output : 20W/liter max. Duration : 5 minutes max. Frequency : 28kHz to 40kHz (3) Cleaning agent The following list of cleaning agents have been tested on the individual components. Evaluation of final assembly should be completed prior to production. Do not clean DLW21S/31S/5AH/5BS series. In case of cleaning, please contact Murata engineering. a) Alcohol cleaning agent Isopropyl alcohol (IPA) 140 Temperature [°C] 300 250 200 cooling Soldering Gradual (in air) Max. Temp. 230°C 230°C 183°C 150 100 50 0 T2 T1 60s Min. Series Soldering Time Pre-heating (150°C) T1(183°C) T2(230°C) NFE31/61 250°C,20s max. BLM, BLA NFM, NFL, NFR NFW, NFA, DLM/P/W 20s max. 60s min. 60s max. 10s max. VFM b) Aqueous cleaning agent Surface active agent (Clean Thru 750H) Hydrocarbon (Cold Cleaner 375) High grade alcohol (Pine Alpha ST-100S) *VFM41R series cannot be cleaned with high grade alcohol type aqueous cleaning agent. Alkaline saponifier (Aqua Cleaner 210SEI-cleaner should be diluted within 15% using deionized water.) (4) Ensure that flux residue is completely removed. Component should be thoroughly dried after aqueous agent has been removed with deionized water. (5) Some products may become slightly whitened. However, product performance or usage is not affected. For additional cleaning methods, please contact Murata engineering. C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Lead Type EMIFILr (Soldering and Mounting) 1. Mounting Hole Mounting holes should be designed as specified below. Part number Bulk type (in mm) Taping type (in mm) ø0.8-3 DSN6 DSS6 VFR3V 2.5±0.2 DSN9 2.5±0.2 1.0±0.2 VFS6V ø0.8-3 DSN9H 2.5±0.2 DST9 ø0.8-3 DST9H 2.5±0.2 2.5±0.2 2.5±0.2 2.5±0.2 2.5±0.2 DSS9 ø1.0-3 1.25±0.2 2.5±0.2 ø0.8-3 DSS9H VFS9V 2.5±0.2 BNX 2.5±0.2 [Component Side] [TERMINAL LAYOUT (Bottom figure)] (B) (CG) (CG) (CG) 2.5±0.1 2.5±0.1 2.5±0.1 ø1.2 (PSG) CB CG CG (CB) 5.0±0.1 7.5±0.1 2. Using THE block type EMIFILr effectively The block type EMIFILr effectively prevents unwanted reflections and external noise from entering the equipment circuitry and power lines by grounding all the high frequency components which make up the noise. Therefore, if grouding is improperly done, the filters may be unable to achieve the performance they are capable of. To prevent this, be sure to observe the following instructions. (1) When designing the P.C. board, use all the available grounding terminals, and arrange the grounding circuit so that the area of the foil for the grounding circuit is maximized. (2) Minimize the distance between the P.C. board ground and the filter's grounding plate. Use through-hole P.C. boards. (3) Whichever P.C. board is used, push the filter into the P.C. board up to the terminal roots. (4) Do not connect PSG to CG by any other means except through the filter. (See the item 1. TERMINAL LAYOUT) PSG B PSG : Power supply ground CG : Load circuit ground CB : Load circuit + Bias [P.C.B. BOARD PATTERNS] Use a bilateral P.C. board. Insert the BNX into the P.C.board until the root of the terminal is secured. then solder. (1) FRONT VIEW PSG (2) BOTTOM VIEW B B PSG B PSG 6 Shield plate PSG CG B CG CG CB CG CG CB CG PSG: Power supply ground CG : Load circuit ground CB : Load circuit + Bias Continued on the following page. 1 141 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Lead Type EMIFILr (Soldering and Mounting) Continued from the preceding page. 4. Soldering (1) Use Rosin-based flux. Do not use strong acidic flux with halide content exceeding 0.2 (wt)% (chlorine conversion value). (2) Standard flow soldering profile. (3) Products and the leads should not be subjected to any mechanical stress during the soldering process, or while subjected to the equivalent high temperatures. Example of input terminal Example of output terminal incoming Electrostatic Surges incoming Electrostatic Surges [Flow Soldering] Preheating (in air) Temperature (°C) 3. Using EMIGUARDr effectively (1) Terminal (with mark) should be connected to the line of incoming electrostatic surge. (There is polarity.) Otherwise, no effect in ESD suppression can be expected. (VFR3V) (2) Products should be used at rated voltage or less and rated current or less. (3) Products should not be applied for the absorption of surges which have large energy (ex. induced lightning surges, switching surges) because it is designed for the absorption of electrostatic surges. (VFR3V) (4) Electrostatic test should be done on the following conditions. (VFR3V) n • [ C / R • V2 ]2 < 8.0 ×105 n : Times applies C : Charging Capacitance (pF) V : Testing Voltage (kV) R : Charging Resistance (Ω) 300 250 Gradual cooling (in air) 240 to 260°C 200 150 100 50 1 minutes min. 6 5. Cleaning Conditions Do not clean VFR3V, PLT09H and VFS6Vseries. Clean other parts in the following conditions. (1) Cleaning temperature should be limited to 60°C max.(40°C max for alcohol type cleaner.) (2) Ultrasonic cleaning should be comply with the following conditions, avoiding the resonance phenomenon at the mounted products and P.C.B. Power : 20 W / l max. Frequency : 28kHz to 40kHz Time : 5 min. max. (3) Cleaner a) Alcohol type cleaner • Isopropyl alcohol (IPA) b) Aqueous agent (PLT series cannot be cleaned) • Surface Active Agent Type (CLEANTHROUGH 750H) 142 Soldering 5s. max. Pre-heating 150˚C, 60 seconds min. Solder Temperature 240 - 260°C, 5 seconds within • Hydrocarbon Type (COLDCLEANER 375) • Higher Alcohol Type (PINE ALPHA ST-100S) • Alkali Saponification Type (*AQUACLEANER 210SEI) * Alkali saponification should be diluted to 15% volume with de-ionized water. (4) There should be no residual flux or residual cleaner after cleaning. In the case of using aqueous agent, products should be dried completely after rinsing with de-ionized water in order to remove the cleaner. (5) Other cleaning : Please contact us. 2 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Chip EMIFILr Packaging Minimum Quantity and Dimensions of 8mm Width Paper / Plastic Tape <plastic> c d 1.75±0.1 ø1.5 +0.1 -0 <paper> a ∗3 3.5±0.1 8.0±0.3 ∗2 2.0±0.1 ∗1 4.0±0.1 4.0±0.1 c Direction of feed b ∗1 BLM15, BLA2A: 2.0±0.1 ∗2 NFE31, NFW31, DLP11S: 2.0±0.05 ∗3 NFE31, NFW31, DLP11S: 3.5±0.05 There are holes in the cavities of the BLM21BD222SN1/ BD272SN1 and BLM31 only. ø1.0 +0.3 -0 Minimum Qty. (pcs.) Cavity Size Part Number ø180mm reel ø330mm reel a b c d Paper Tape Plastic Tape BLM03 0.70 0.40 0.55 - 15000 BLM15 1.15 0.65 0.8 - 10000 - 4000 1.1 - 1.3 0.2 1.3 0.2 BLM18 (BLM18E_TN1) 1.85 1.05 BLM21 (BD222SN1/BD272SN1) 2.25 1.45 BLM31 (AF700SN1) 3.5 1.9 BLA2A 2.2 1.2 1.1 0.75 1.75 0.8 - Bulk Paper Tape Plastic Tape - - - 1000 - 50000 - 1000 - 10000 - 1000 4000 - 10000 - - 3000 - 10000 - 3000 - 10000 - 2500 - 8000 10000 - - - 1000 10000 - 1000 1000 1000 1.1 - 4000 - 0.9 - 4000 - - - 500 1.1 - 4000 - - - 500 1.1 - 4000 - - - 500 1.4 0.85 0.2 - 4000 - - 500 3.5 2.0 1.1 - 4000 - - - 100 3.6 1.9 2.0 0.2 - 2000 - 8000 500 NFR21G 2.3 1.55 0.7 0.25 - 4000 - - 500 NFW31S 3.6 1.9 2.0 0.2 - 2000 - 7500 - DLM2HG 2.75 2.25 1.3 0.25 - 3000 - - 1000 DLP11S 1.4 1.2 0.98 0.25 - 3000 - - 500 DLP31D/31S 3.5 1.9 1.3 0.25 - 3000 - - 500 DLW21S 2.25 1.45 1.4 0.3 - 2000 - - 500 DLW21H 2.3 1.55 1.1 0.25 - 3000 - - 500 DLW31S 3.6 2.0 2.1 0.3 - 2000 - - 500 BLA31 3.4 1.8 NFM18/NFL18S NFM18PC (Except 105R) 1.85 1.05 NFM21/NFL21S 2.3 1.55 NFM3DC/3DP 3.4 NFA31G/31C NFE31P NFL18ST/NFM18PC105R • Please contact us for BLM15/18 in bulk case. (in mm) Continued on the following page. 143 6 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Chip EMIFILr Packaging Continued from the preceding page. c 0.3 a Part Number 12.0±0.3 +0.1 ø1.5 -0 5.5±0.1 2.0±0.1 4.0±0.1 4.0±0.1 1.75±0.1 Minimum Quantity and Dimensions of 12mm Width Plastic Tape Direction of feed b Cavity Size Minimum Qty. (pcs.) a b c BLM41 4.8 1.9 1.75 ø180mm reel ø330mm reel 2500 NFM41 4.8 1.8 1.1 NFE61 7.2 1.9 1.75 VFM41R 4.8 1.8 1.35 Bulk 8000 1000 4000 - 500 2500 8000 500 2500 - 500 b c 0.3 Part Number 12.0±0.3 ø1.5 +0.1 -0 5.5±0.1 a 2.0±0.1 8.0±0.1 4.0±0.1 1.75±0.1 There are holes in the cavities of the BLM41 only. ø1.5 +0.3 -0 Cavity Size Minimum Qty. (pcs.) a b c DLW5AH 5.4 4.1 4.4 ø180mm reel ø330mm reel 400 1500 Bulk 100 DLW5BS 5.5 5.4 4.7 400 1500 100 Direction of feed ø1.5 +0.3 -0 (in mm) 6 144 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Ferrite Beads Inductors Packaging Minimum Quantity (Pcs.) Series Bulk Ammo Pack ø320mm Paper reel BL01RN 500 1000 2000 BL02RN 500 1500 — BL03RN 1000 2000 — ø0.60 5±0.3 BL02RN1R2p1A ∆S F 3.4±0.2 ∗ W0 *L 6.0±1.0 | L1 - L2 | V 1.5 *L BL01RN1A1F1J : 52+2/-1 BL01RN1A1E1A : 26+1.5/-0 D0 t P0 ∗There is a excess bond stick on the wire. BL02RN1R3N1A BL02RN2R1p1A ∆S ∆S W2 H1 ød ∗There is a excess bond stick on the wire. I t t P0 BL02RN2R3N1A BL03RN2R1p1A ∆S ∆S t W0 t P0 Symbol Dimension (mm) Remarks Pitch of component P 12.7 Product inclination ∆S determines tolerance Pitch of sprocket hole P0 12.7±0.2 Lead spacing F 5.0 +0.8 -0.2 Hole center to lead P1 3.85±0.7 Hole center to component center P2 6.35±1.3 Deviation along tape, left or right ∆S ±1.0 Carrier tape width W 18.0±0.5 Position of sprocket hole W1 9.0 +0 0.0 -0.5 Description Lead length between sprocket hole and forming position Protruding length H1 6 Lead Length Number : P 18.5±0.5 BL03RN Diameter of sprocket hole D0 ø4.0±0.1 Lead Diameter ød ø0.60 t 0.7±0.2 ∆h1, ∆h2 1.0 max. L 11.0 +0 0.0 -1.0 Hold down tape width W0 12.0±0.5 Hold down tape position W2 1.5±1.5 Cutting position of failure Tape with deviation Lead Length Number : Q 20.0±0.5 BL02RN***P1A +0.5 to –1.0 Deviation across tape, Deviation across tape rear Tape deviation in feeding direction Lead Length Number : N 16.5±0.5 BL02, BL03 I Total tape thickness ∆h2 I I D0 P0 ∆h1 H1 ød W W0 L D0 F L P1 2.3 max. 8.3 max. W2 ∆h2 W1 ød ∆h1 P P2 6.5 max. 3.4±0.2 W2 F P1 9.0 max. H1 P 12.0 max. P2 W1 ∆h2 ∆h1 W0 W W0 D0 I D0 P0 F L P1 W1 W2 ∆h2 ød ∆h1 3.4±0.2 9.0 max. P 7.5 max. ∗ P2 3.4±0.2 L W1 8.0 max. H1 F P1 W P 12.0 max. P2 W ∆h2 ∆h1 ød L W1 3.2 min 0.8 max. L2 W L1 0.8 max. P1 7.5 max. P W2 5±0.5 1.2 max. P2 7.5 max. Direction of feed 0 max. H1 BL01RN I ø3.6 ±0.15 Taping Dimensions Including bonding tape thickness (in mm) 145 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Disc Type EMIFILr and EMIGUARDr Packaging Minimum Quantity Lead Type Code Minimum Order Quantity (order in sets only) (Pcs.) Part Number Lead Type code Lead length (H) Incrimp Type Straight Type Ammo Pack ø320mm Paper reel Bulk (Bag) Q91 - 20.0±1.0mm VFR3V Series 2000 — 250 Q92 U21 16.5±1.0mm DS 6/VFS6V Series 2000 — 250 Q93 U31 18.5±1.0mm DSN9/9H Series 2000 — 250 DST9/9H Series 1000 ∗1 1000 ∗2 200 DSS9/9H Series — 800 200 VFS9V Series — 800 200 ∗1 : Q92, Q93 ∗2 : Q91 Taping Dimensions DSS6_Q91/Q92/Q93 DSN6_Q91/Q92/Q93 DSN9_Q91/Q92/Q93 2.5+0.4/-0.2 1.0 max. *2 3.85±0.7 11.0+0/-1.0 ø0.6 2.54 max. 8.0 max. 0±1.0 6.35±1.3 12.7 *1 1.0 max. 1.0 max. ø0.6 2.5+0.4/-0.2 +0.5 to -1.0 H Q91 Type : 20±1.0 Q92 Type : 16.5±1.0 Q93 Type : 18.5±1.0 1.5 max. 12.7±0.2 0.7±0.2 0.7±0.2 H Q91 Type : 20±1.0 Q92 Type : 16.5±1.0 Q93 Type : 18.5±1.0 +0.5 to -1.0 ø4.0±0.1 1.5 max. ø4.0±0.1 12.7±0.2 12.0±0.5 18.0±0.5 12.0±0.5 9.0+0/-0.5 H 1.5±1.5 5.0+0.8/-0.2 1.0 max. 7.0 max. 3.85±0.7 9.0+0/-0.5 18.0±0.5 11.0+0/-1.0 0±1.0 DSN6_ : 2.54 max. DSN9_ : 4.0 max. 1.5±1.5 6.35±1.3 12.7 2.5+0.4/-0.2 DSN6_ : 8.0 max. DSN9_ : 11.0 max. DSN6_ : 7.0 max. DSN9_ : 9.5 max. H 5.0+0.8/-0.2 *1 There may be a hole on the top of ferrite beads, which cause no characteristics deterioration. *2 Bottom of the ferrite beads may not be level with each other. DSS6_U21/U31 DST9_Q91/Q92/Q93 5.0+0.8/-0.2 4.0 max. H +0.5 to -1.0 ø4.0±0.1 12.7±0.2 H U21 Type : 16.5±1.0 U31 Type : 18.5±1.0 2.3 max. 5.0 max. 1.5±1.5 11.0+0/-1.0 ø0.6 2.5+0.4/-0.2 12.7±0.2 1.5 max. 0.7±0.2 12.7±0.2 H Q91 Type : 20±1.0 Q92 Type : 16.5±1.0 Q93 Type : 18.5±1.0 1.5 max. (1)(2)(3) +0.5 to -1.0 ø4.0±0.1 1.0 max. ø0.45±0.1 12.0±0.5 AY 1.0 max. +0.5 to -1.0 ø4.0±0.1 0.7±0.2 AY 18.5±1.0 AY 3.85±0.7 18.0±0.5 H 2.5+0.4/-0.2 2.5+0.4/-0.2 8.0 max. 0±1.0 1.0 max. 9.0+0/-0.5 1.5±1.5 11.0 max. 1.0 max. 12.0±0.5 9.0+0/-0.5 6.35±1.3 12.7 12.0 max. 0±1.0 *1 11.0+0/-1.0 3.85±0.7 18.0±0.5 *1 There may be a hole on the top of ferrite beads, which cause no characteristics deterioration. *2 Bottom of the ferrite beads may not be level with each other. 5.0+0.8/-0.2 7.5 max. 2.5+0.4/-0.2 5.0+0.8/-0.2 ø0.6 1.5 max. 1.5 max. 2.5+0.4/-0.2 VFS9V_Q91/Q92/Q93 6.35±1.3 12.7 1.0 max. VFR3V_U31 DSS9_Q91/Q92/Q93 6 3.85±0.7 2.54 max. 1.0 max. 12.0±0.5 ø0.6 0.7±0.2 H Q91 Type : 20±1.0 Q92 Type : 16.5±1.0 Q93 Type : 18.5±1.0 1.5±1.5 *2 +0.5 to -1.0 ø4.0±0.1 12.7±0.2 0±1.0 0.7±0.2 H 2.5+0.4/-0.2 2.5+0.4/-0.2 8.0 max 12.7 *1 11.0+0/-1.0 12.0±0.5 18.0±0.5 9.0+0/-0.5 3.85±0.7 11.0+0/-1.0 1.0 max. 15.5 max. 1.0 max. 6.35±1.3 9.0+0/-0.5 9.5 max. 0±1.0 1.5±1.5 6.35±1.3 12.7 2.5+0.4/-0.2 18.0±0.5 5.0+0.8/-0.2 DSS6_U : 10.0 max. VFS6V : 10.5 max. VFS6V_U31 *1 Bottom of the ferrite beads may not be level with each other. (in mm) 146 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please C31E9.pdf 03.3.12 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Chip EMI Suppression Filter Design Kits oEKEMBL15C (Chip Ferrite Beads 0402 Size) No. Part Number Quantity (pcs.) Impedance typ. (at 100MHz, 20 degree C) Rated Current (mA) DC Resistance (Ω) max. 1 BLM15AG100SN1 20 10Ω (Typ.) 1000 0.05 2 BLM15AG700SN1 20 70Ω (Typ.) 500 0.15 3 BLM15AG121SN1 20 120Ω±25% 500 0.25 4 BLM15AG221SN1 20 220Ω±25% 300 0.35 5 BLM15AG601SN1 20 600Ω±25% 300 0.60 6 BLM15AG102SN1 20 1000Ω±25% 200 1.00 7 BLM15BB050SN1 20 5Ω±25% 500 0.08 8 BLM15BB100SN1 20 10Ω±25% 300 0.10 9 BLM15BB220SN1 20 22Ω±25% 300 0.20 10 BLM15BB470SN1 20 47Ω±25% 300 0.35 11 BLM15BB750SN1 20 75Ω±25% 300 0.40 12 BLM15BB121SN1 20 120Ω±25% 300 0.55 13 BLM15BB221SN1 20 220Ω±25% 200 0.80 14 BLM15BD471SN1 20 470Ω±25% 200 0.60 15 BLM15BD601SN1 20 600Ω±25% 200 0.65 16 BLM15BD102SN1 20 1000Ω±25% 200 0.90 Rated Current (mA) DC Resistance (Ω) max. oEKEMBL18A (Chip Ferrite Beads 0603 Size/ for Large-current P Type) No. Part Number Quantity (pcs.) Impedance typ. (at 100MHz, 20 degree C) 1 BLM18AG121SN1 20 120Ω±25% 200 0.20 2 BLM18AG221SN1 20 220Ω±25% 200 0.30 3 BLM18AG471SN1 20 470Ω±25% 200 0.50 4 BLM18AG601SN1 20 600Ω±25% 200 0.50 5 BLM18AG102SN1 20 1000Ω±25% 100 0.70 6 BLM18BA050SN1 20 5Ω±25% 500 0.20 7 BLM18BA100SN1 20 10Ω±25% 500 0.25 8 BLM18BA220SN1 20 22Ω±25% 500 0.35 9 BLM18BA470SN1 20 47Ω±25% 300 0.55 10 BLM18BA750SN1 20 75Ω±25% 300 0.35 11 BLM18BA121SN1 20 120Ω±25% 200 0.90 12 BLM18BB100SN1 20 10Ω±25% 500 0.15 13 BLM18BB220SN1 20 22Ω±25% 500 0.25 14 BLM18BB470SN1 20 47Ω±25% 500 0.30 15 BLM18BB600SN1 20 60Ω±25% 200 0.35 16 BLM18BB121SN1 20 120Ω±25% 200 0.50 17 BLM18BB221SN1 20 220Ω±25% 200 0.65 18 BLM18BB471SN1 20 470Ω±25% 50 1.00 19 BLM18BD121SN1 20 120Ω±25% 200 0.40 6 Continued on the following page. 1 147 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please C31E9.pdf 03.3.12 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Chip EMI Suppression Filter Design Kits Continued from the preceding page. Quantity (pcs.) Impedance typ. (at 100MHz, 20 degree C) Rated Current (mA) DC Resistance (Ω) max. 220Ω±25% 200 0.45 470Ω±25% 200 0.55 600Ω±25% 200 0.65 20 1000Ω±25% 100 0.85 20 1800Ω±25% 50 1.50 BLM18BD252SN1 20 2500Ω±25% 50 1.50 26 BLM18HG471SN1 20 470Ω±25% 200 0.85 27 BLM18HG601SN1 20 600Ω±25% 200 1.00 28 BLM18HG102SN1 20 1000Ω±25% 100 1.60 29 BLM18HD471SN1 20 470Ω±25% 100 1.20 30 BLM18HD601SN1 20 600Ω±25% 100 1.50 31 BLM18HD102SN1 20 1000Ω±25% 50 1.80 32 BLM18PG330SN1 20 33Ω±25% 3000 0.025 33 BLM18PG121SN1 20 120Ω±25% 2000 0.05 34 BLM18PG181SN1 20 180Ω±25% 1500 0.09 35 BLM21PG221SN1 20 220Ω (Typ.) 2000 0.05 36 BLM21PG331SN1 20 330Ω (Typ.) 1500 0.09 37 BLM31PG121SN1 20 120Ω (Typ.) 3000 0.025 38 BLM31PG391SN1 20 390Ω (Typ.) 2000 0.05 39 BLM31PG601SN1 20 600Ω (Typ.) 1500 0.9 40 BLM41PG181SN1 20 180Ω (Typ.) 3000 0.025 41 BLM41PG471SN1 20 470Ω (Typ.) 2000 0.05 42 BLM41PG102SN1 20 1000Ω (Typ.) 1500 0.09 43 BLM18RK121SN1 20 120Ω±25% 200 0.25 44 BLM18RK221SN1 20 220Ω±25% 200 0.3 45 BLM18RK471SN1 20 470Ω±25% 200 0.5 46 BLM18RK601SN1 20 600Ω±25% 200 0.6 47 BLM18RK102SN1 20 1000Ω±25% 200 0.8 48 BLM18HK471SN1 20 470Ω±25% 200 0.7 49 BLM18HK601SN1 20 600Ω±25% 100 0.9 50 BLM18HK102SN1 20 1000Ω±25% 50 1.5 Impedance typ. (at 100MHz, 20 degree C) Rated Current (mA) DC Resistance (Ω) max. No. Part Number 20 BLM18BD221SN1 20 21 BLM18BD471SN1 20 22 BLM18BD601SN1 20 23 BLM18BD102SN1 24 BLM18BD182SN1 25 oEKEMBL21A (Chip Ferrite Beads 0805 Size) No. 6 Part Number Quantity (pcs.) 1 BLM21AG121SN1 20 120Ω±25% 200 0.15 2 BLM21AG221SN1 20 220Ω±25% 200 0.20 3 BLM21AG471SN1 20 470Ω±25% 200 0.25 4 BLM21AG601SN1 20 600Ω±25% 200 0.30 5 BLM21AJ601SN1 20 600Ω±25% 200 1.10 6 BLM21AG102SN1 20 1000Ω±25% 200 0.45 7 BLM21AH102SN1 20 1000Ω±25% 200 0.45 8 BLM21BB600SN1 20 60Ω±25% 200 0.20 9 BLM21BB750SN1 20 75Ω±25% 200 0.25 10 BLM21BB121SN1 20 120Ω±25% 200 0.25 11 BLM21BB221SN1 20 220Ω±25% 200 0.35 12 BLM21BB471SN1 20 470Ω±25% 200 0.45 13 BLM21BD121SN1 20 120Ω±25% 200 0.25 14 BLM21BD221SN1 20 220Ω±25% 200 0.25 15 BLM21BD471SN1 20 470Ω±25% 200 0.35 16 BLM21BD601SN1 20 600Ω±25% 200 0.35 17 BLM21BD102SN1 20 1000Ω±25% 200 0.40 Continued on the following page. 2 148 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Chip EMI Suppression Filter Design Kits Continued from the preceding page. Impedance typ. (at 100MHz, 20 degree C) Quantity (pcs.) No. Part Number 18 BLM21BD182SN1 20 19 BLM21BD222SN1 20 20 BLM21BD222TN1 20 21 BLM21BD272SN1 20 Rated Current (mA) DC Resistance (Ω) max. 1800Ω±25% 200 0.50 2250Ω (Typ.) 200 0.60 2200Ω±25% 200 0.60 2700Ω±25% 200 0.80 oEKEMFL18B (Chip EMIFIL LC Combined Type) No. Part Number Quantity (pcs.) Cut off Frequency Rated Voltage Rated Current Insulation Resistance (MΩ min.) DC Resistance max. 4.5Ω 1 NFL18ST107X1C3 20 100MHz 16 V 100mA 1000 2 NFL18ST157X1C3 20 150MHz 16 V 100mA 1000 4.0Ω 3 NFL18ST207X1C3 20 200MHz 16 V 150mA 1000 3.5Ω 4 NFL18ST307X1C3 20 300MHz 16 V 200mA 1000 1.8Ω 5 NFL18ST507X1C3 20 500MHz 16 V 200mA 1000 1.5Ω 6 NFL18SP157X1A3 20 150MHz 10 V 100mA 1000 3.0Ω 7 NFL18SP207X1A3 20 200MHz 10 V 100mA 1000 3.0Ω 8 NFL18SP307X1A3 20 300MHz 10 V 100mA 1000 3.0Ω 9 NFL18SP507X1A3 20 500MHz 10 V 100mA 1000 2.0Ω 10 NFL21SP206X1C3 20 20MHz 16 V 100mA 1000 8.5Ω 11 NFL21SP506X1C3 20 50MHz 16 V 150mA 1000 3.5Ω 12 NFL21SP706X1C3 20 70MHz 16 V 150mA 1000 3.0Ω 13 NFL21SP107X1C3 20 100MHz 16 V 200mA 1000 2.0Ω 14 NFL21SP157X1C3 20 150MHz 16 V 200mA 1000 2.0Ω 15 NFL21SP207X1C3 20 200MHz 16 V 250mA 1000 1.5Ω 16 NFL21SP307X1C3 20 300MHz 16 V 300mA 1000 1.2Ω 17 NFL21SP407X1C3 20 400MHz 16 V 300mA 1000 1.2Ω 18 NFL21SP507X1C3 20 500MHz 16 V 300mA 1000 1.2Ω No. Part Number Attenuation (dB min.) Quantity Cut off Rated Rated (pcs.) Frequency 10MHz 20MHz 50MHz 100MHz 150MHz 200MHz 300MHz 400MHz 500MHz 1GHz Current Voltage 19 NFW31SP106X1E4 20 10MHz 6dB max 5 25 25 - 25 - - 30 30 200mA 25V 20 NFW31SP206X1E4 20 20MHz - 6dB max 5 25 - 25 - - 30 30 200mA 25V 21 NFW31SP506X1E4 20 50MHz - - 6dB max 10 - 30 - - 30 30 200mA 25V 22 NFW31SP107X1E4 20 100MHz - - - 6dB max - 5 - - 20 30 200mA 25V 23 NFW31SP157X1E4 20 150MHz - - - - 6dB max - 10 20 30 30 200mA 25V 24 NFW31SP207X1E4 20 200MHz - - - - - 6dB max - - 10 30 200mA 25V 25 NFW31SP307X1E4 20 300MHz - - - - - - 6dB max - 5 15 200mA 25V 26 NFW31SP407X1E4 20 400MHz - - - - - - - 6dB max - 10 200mA 25V 27 NFW31SP507X1E4 20 500MHz - - - - - - - - 6dB max 10 200mA 25V oEKEMFA31B (Chip EMIFIL Capacitor Array Type/ Capacitor Type/ LC Combined Type) No. Part Number 6 Quantity (pcs.) Capacitance Rated Voltage Rated Current Insulation Resistance (MΩ min.) 1 NFA31CC220S1E4 20 22pF±20% 25 V 200mA 1000 2 NFA31CC470S1E4 20 47pF±20% 25 V 200mA 1000 3 NFA31CC101S1E4 20 100pF±20% 25 V 200mA 1000 4 NFA31CC221S1E4 20 220pF±20% 25 V 200mA 1000 5 NFA31CC471R1E4 20 470pF±20% 25 V 200mA 1000 6 NFA31CC102R1E4 20 1000pF±20% 25 V 200mA 1000 7 NFA31CC222R1E4 20 2200pF±20% 25 V 200mA 1000 8 NFA31CC223R1C4 20 22000pF±20% 16 V 200mA 1000 9 NFA31GD1006R84 20 10pF±20% 6V 50mA 1000 10 NFA31GD1004704 20 10pF±20% 6V 20mA 500 Continued on the following page. 3 149 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Chip EMI Suppression Filter Design Kits Continued from the preceding page. oEKEMFA31B (Chip EMIFIL Capacitor Array Type/ Capacitor Type/ LC Combined Type) No. Part Number Quantity (pcs.) Capacitance Rated Voltage Rated Current Insulation Resistance (MΩ min.) 11 NFA31GD1001014 20 10pF±20% 6V 15mA 1000 12 NFA31GD4706R84 20 47pF±20% 6V 50mA 1000 13 NFA31GD4704704 20 47pF±20% 6V 20mA 1000 14 NFA31GD4701014 20 47pF±20% 6V 15mA 1000 15 MFA31GD1016R84 20 100pF±20% 6V 50mA 1000 16 NFA31GD1014704 20 100pF±20% 6V 20mA 1000 17 NFA31GD1011014 20 100pF±20% 6V 15mA 1000 oEKEMDL21C (Chip Common Mode Choke Coils) No. Part Number Quantity (pcs.) Common Mode Impedance typ. (at 100MHz, 20 degree C) Rated Voltage Rated Current Insulation Resistance (MΩ min.) 1 DLW21SN670SQ2 10 67Ω (Typ.) 50V 400mA 10 2 DLW21SN900SQ2 10 90Ω (Typ.) 50V 330mA 10 3 DLW21SN121SQ2 10 120Ω (Typ.) 50V 370mA 10 4 DLW21SN181SQ2 10 180Ω (Typ.) 50V 330mA 10 5 DLW21SN261SQ2 10 260Ω (Typ.) 50V 300mA 10 6 DLW21SN371SQ2 10 370Ω (Typ.) 50V 280mA 10 7 DLW31SN900SQ2 10 90Ω (Typ.) 50V 370mA 10 8 DLW31SN161SQ2 10 160Ω (Typ.) 50V 340mA 10 9 DLW31SN261SQ2 10 260Ω (Typ.) 50V 310mA 10 10 DLW31SN601SQ2 10 600Ω (Typ.) 50V 260mA 10 11 DLW31SN102SQ2 10 1000Ω (Typ.) 50V 230mA 10 12 DLW31SN222SQ2 10 2200Ω (Typ.) 50V 200mA 10 13 DLW5AHN402SQ2 5 4000Ω (Typ.) 50V 200mA 10 14 DLW5BSN302SQ2 5 3000Ω (Typ.) 50V 500mA 10 15 DLW5BSN152SQ2 5 1500Ω (Typ.) 50V 1000mA 10 16 DLW5BSN102SQ2 5 1000Ω (Typ.) 50V 1500mA 10 17 DLW5BSN351SQ2 5 350Ω (Typ.) 50V 2000mA 10 18 DLW5BSN191SQ2 5 190Ω (Typ.) 50V 5000mA 10 19 DLP31DN900ML4 10 90Ω±20% 10V 160mA 100 20 DLP31DN131ML4 10 130Ω±20% 10V 120mA 100 10V 100mA 100 21 DLP31DN201ML4 10 200Ω±20% 22 DLP31DN321ML4 10 320Ω±20% 10V 80mA 100 23 DLP31DN441ML4 10 440Ω±20% 10V 70mA 100 oEKEMNFMPA 6 No. Quantity (pcs.) Capacitance Rated Voltage Rated Current Insulation Resistance (MΩ min.) 1 NFM18PC104R1C3 Part Number 20 0.1µF±20% 16 V 2A 1000 2 NFM18PC105R0J3 20 1µF±20% 6.3 V 2A 500 3 NFM21PC104R1E3 20 0.1µF±20% 25 V 2A 1000 4 NFM21PC224R1C3 20 0.22µF±20% 16 V 2A 1000 5 NFM21PC474R1C3 20 0.47µF±20% 16 V 2A 1000 6 NFM21PC105B1A3 20 1µF±20% 10 V 4A 500 7 NFM21PC105F1C3 20 1µF +80/-20% 16 V 2A 500 8 NFE31PT152Z1E9 20 1500pF +50/-20% 25 V 6A 1000 1000 9 NFE31PT222Z1E9 20 2200pF±50% 25 V 6A 10 NFE61PT102E1H9 20 1000pF +80/-20% 50 V 2A 1000 11 NFE61PT472C1H9 20 4700pF +80/-20% 50 V 2A 1000 12 NFM41PC204F1H3 20 0.2µF +80/-20% 50 V 2A 1000 Continued on the following page. 4 150 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please C31E9.pdf 03.3.12 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Chip EMI Suppression Filter Design Kits Continued from the preceding page. oEKEMNFMCA No. Quantity (pcs.) Capacitance Rated Voltage Rated Current Insulation Resistance (MΩ min.) 1 NFM18CC220U1C3 Part Number 20 22pF±20% 16 V 300mA 1000 2 NFM18CC470U1C3 20 47pF±20% 16 V 300mA 1000 3 NFM18CC101R1C3 20 100pF±20% 16 V 300mA 1000 4 NFM18CC221R1C3 20 220pF±20% 16 V 300mA 1000 5 NFM18CC471R1C3 20 470pF±20% 16 V 300mA 1000 6 NFM18CC102R1C3 20 1000pF±20% 16 V 300mA 1000 7 NFM18CC222R1C3 20 2200pF±20% 16 V 300mA 1000 8 NFM18CC223R1C3 20 22000pF±20% 16 V 1000mA 1000 9 NFM21CC220U1H3 20 22pF±20% 50 V 300mA 1000 10 NFM21CC470U1H3 20 47pF±20% 50 V 300mA 1000 11 NFM21CC101U1H3 20 100pF±20% 50 V 300mA 1000 12 NFM21CC221R1H3 20 220pF±20% 50 V 300mA 1000 13 NFM21CC471R1H3 20 470pF±20% 50 V 300mA 1000 14 NFM21CC102R1H3 20 1000pF±20% 50 V 300mA 1000 15 NFM21CC222R1H3 20 2200pF±20% 50 V 300mA 1000 16 NFM21CC223R1H3 20 22000pF±20% 50 V 2000mA 1000 6 5 151 catalog to prevent smoking and/or burning, !Note • Please Please read read rating rating and and !CAUTION !CAUTION (for (for storage, storage, operating, operating, rating, rating, soldering, soldering, mounting mounting and and handling) handling) in in this this PDF catalog to prevent smoking and/or burning, etc. etc. C31E9.pdf 03.3.12 you are requested approvespecifications. our product specifications or to transact for product before ordering. • This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe ourapproval productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Outlines of Major Noise Regulation Standards 1. EMI Regulations Equipment Countries Generic Standard Information Regulation Japan USA Europe CISPR61000-6-3 EN50081-1 (Residential, Commercial (Residential, Commercial and Light Industry) and Light Industry) IEC61000-6-4 EN50081-2 (Industrial) (Industrial) ITE : Information Technology Equipment Printer, Personal computer VCCI FCC Part 15 ∗1 Subpart B CISPR 11 ∗1 FCC Part 18 EN55011 CISPR 12 JASO FCC Part 15 Automotive Subpart B Directive CISPR 13 ∗1 CISPR 14 ∗1 EN55014 CISPR 15 ∗1 EN55015 CISPR 22 EN55022 Word processor, Display ISM equipment, Microwave Emission Igniter (Automobile, Motorboat) TV, Radio, Audio, VTR FCC Part 15 Subpart B EN55013 Household electrical equipment Portable tool Fluorescent Lamp, Luminary Radio Act Transceiver (Reference) Power Supply Higher Harmonic Basic Standard Immunity Generic Standard ITU-T IEC61000-3 IEC61000-4 FCC Part 15 ARIB Subpart C (Voluntary Ragulation) FCC Part 22 Industrial Voluntary Regulation In the process of Regulating at JIS ETS300 Series EN61000-3 EN61000-4 Series IEC61000-6-1 EN50082-1 (Residential, Commercial (Residential, Commercial and Light Industry) IEC61000-6-2 In the process of Regulating at JIS and Light Industry) EN50082-2 (Industrial) (Industrial) Industrial Process Measurement and Control Equipment Radio, TV ITE : Information Technology Equipment CISPR 20 CISPR 24 Industrial Voluntary Action EN55020 EN55024 ∗1 Electrical Appliance and Material Safety Law There are EMI regulations in each country to meet EMI noise levels emitted from digital equipment. In the countries which regulate EMI, equipment which does not satisfy with regulations is not allowed to be sold. Continued on the following page. 152 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, !Note • Please Please read read rating rating and and !CAUTION !CAUTION (for (for storage, storage, operating, operating, rating, rating, soldering, soldering, mounting mounting and and handling) handling) in in this this PDF catalog to prevent smoking and/or burning, etc. etc. you are requested approvespecifications. our product specifications or to transact for product before ordering. • This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe ourapproval productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Outlines of Major Noise Regulation Standards Continued from the preceding page. 2. Measurement Point and Noise Detection Regulation CISPR 22/ EN55022 VCCI FCC Part 15 Polarization and Measuring Point Frequency (Hz) Radiated Interference Horizontal Pol. Vertical Pol. 30M to 1GHz Quasi-Peak Detection Antenna Main Interference Voltage AC Main Ports 150k to 30MHz Quasi-Peak Detection Mean Detection Artificial Main Network Radiated Interference Horizontal Pol. Vertical Pol. 30M to 1GHz Quasi-Peak Detection Dipole Antenna Main Interference Voltage AC Main Ports 150k to 30MHz Quasi-Peak Detection Mean Detection Artificial Main Network Radiated Interference Horizontal Pol. Vertical Pol. 30M to 40GHz Quasi-Peak Detection Mean Detection Antenna Main Interference Voltage AC Main Ports 150k to 30MHz Quasi-Peak Detection Artificial Main Network Measuring Item Detection Measuring Devices PeakUQuasi-PeakUAverage (Qp) V V Peak Detection Quasi-Peak Detection Peak Detection Average Detection Quasi-Peak Detection Average Detection t t Short Repetition Period Long Repetition Period 3. Limits of CISPR 22/EN55022 Conversion ← Limitation for Limitation for 10m Distance 3m Distance R10 (dB µ V/m) R3 (dB µ V/m) r10 (µ V/m) r3 (µ V/m) R10=20 log r10 R3=20 log r3 R3=R10+20 (1-log3) [Main Terminal Interference Voltage (Power Supply)] 90 Voltage [dBµV] (1)CISPR 22 recommends measurement at 10m distance. However, other distance is acceptable if the limitation is converted according to the following calculation. Limitation shown left is converted to limitation for 3m 79 class A Quasi-peak value 73 66 class A Mean value 70 56 50 60 56 class B Quasi-peak value 50 46 class B Mean value 30 10k 100k 150k 500k 1M 5M 10M 30M 100M Frequency [Hz] [Radiated Interference] r3 = 10 r10 3 Field Strength [dBµV/m] 90 70 57 50 50 40 class A 47 class B 30 10M 30M 100M 230M 1G Frequency [Hz] On the border frequency, lower limit should be applied. Class A Equipment : The equipment which is used in light industrial commercial areas. Class B Equipment : The equipment which is used in residential areas. Continued on the following page. 153 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, !Note • Please Please read read rating rating and and !CAUTION !CAUTION (for (for storage, storage, operating, operating, rating, rating, soldering, soldering, mounting mounting and and handling) handling) in in this this PDF catalog to prevent smoking and/or burning, etc. etc. you are requested approvespecifications. our product specifications or to transact for product before ordering. • This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe ourapproval productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Outlines of Major Noise Regulation Standards Continued from the preceding page. (2)Scope of CISPR 22 Regulation This regulation applies to information technology equipment (ITE) which are defined as: (a) Equipment that receives data from external signal sources; (b) Equipment that processes received data; (c) Equipment that outputs data (d) Equipment that has less than 600V rated voltage in power supply [CISPR Regulations] CISPR 10 Organization, Regulations and Procedures of CISPR CISPR 11 Industrial, Scientific and Medical (ISM) Radio-Frequency Equipment CISPR 12 Vehicles, Motor Boats and Spark-Ignited Engine driven CISPR 13 Sound and Television Receivers CISPR 14 Household Electrical Appliances, Portable Tools and Similar Electrical Apparatus CISPR 15 Fluorescent Lamps and Iuminaries CISPR 16 Radio Interference Measuring Apparatus and Measurement Methods CISPR 17 Passive Radio Interference Filters and Suppression Components CISPR 18 Power Transmission Cables and High Voltage equipment CISPR 19 Microwave Ovens for Frequencies above 1GHz CISPR 20 Immunity of Sound and TV Broadcast Receivers Veceivers and Associated Equipment CISPR 21 Interference to Mobile Radiocommunications in the Presence of Impulsive Noise CISPR 22 Information Technology Equipment CISPR 23 Industrial Scientific and Medical (ISM) Equipment CISPR 24 Immunity Regulation of Information Technology Equipment CISPR 25 Receiver used on board vehicles, boats, and on devices 4. Limits of VCCI Voluntary Regulation 90 Voltage [dBµV] (2)Scope of VCCI Voluntary Regulation This regulation applies to information technology equipment (same as CISPR Pub.22), but the application is excluded on the following equipment: · Equipment for which other regulations already exist (e.g., household electrical appliances, radio and TV receivers) · In station equipment principal purpose of which is electrical communication · Industrial plant control system for which information processing is a secondary system function · Industrial, commercial and medical testing and measuring systems for which data processing is a secondary system function · Information equipment for which CISPR is conducting further deliberation VCCI is the acronym of Voluntary Control Council for Interference by Data Processing Equipment and Electronic Office Machines. VCCI is organized by the following organizations: · Japan Electronics and Information Technology Industries Association (JEITA) · Japan Business Machine and Information System Industries Association (JBMIA) · Communication and Information network Association of Japan (CIAJ) [Main Terminal Interference Voltage (Power Supply)] 79 class A Quasi-peak value 73 66 class A Mean value 70 56 50 60 56 class B Quasi-peak value 50 46 class B Mean value 30 100k 150k 500k 1M 10k 5M 10M 30M 100M Frequency [Hz] [Radiated Interference] 90 Field Strength [dBµV/m] (1)VCCI recommend measurement at 10m distance. 3m or 30m distance measurement are also allowed. 70 class A Quasi-peak value 50 57 50 47 40 class B Quasi-peak value 30 10M 30M 100M 230M 1G Frequency [Hz] On the border frequency, lower limit should be applied. Class B ITE : Equipment that designed to be used at home. Class A ITE : Equipment that does not meet interference limits of class B equipment, but satisfies interference limits of class A equipment. Continued on the following page. 154 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, !Note • Please Please read read rating rating and and !CAUTION !CAUTION (for (for storage, storage, operating, operating, rating, rating, soldering, soldering, mounting mounting and and handling) handling) in in this this PDF catalog to prevent smoking and/or burning, etc. etc. you are requested approvespecifications. our product specifications or to transact for product before ordering. • This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe ourapproval productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Outlines of Major Noise Regulation Standards Continued from the preceding page. 5. Limits of FCC Part 15 Subpart B [Main Terminal Interference Voltage (Power Supply)] 90 Voltage [dBµV] (1)Class A recommend to be measured with 10m distance. Class B recommend to be measured with 3m distance. (2)The FCC Part 15 regulation controls radiated interference by establishing quasi-peak and mean value limits for frequencies ranging from 30MHz to 40GHz (or maximum frequency's fifth harmonic, whichever is lower). For AC main ports, the FCC Part 15 regulation controls main terminal interference voltage by establishing quasipeak value limits for frequencies ranging from 450kHz to 30MHz. 79 class A Quasi-peak value 73 66 class A Mean value 70 56 60 56 class B Quasi-peak value 50 50 46 class B Mean value 30 Measurement Frequency Range for Radiated Interference Maximum Frequency the Equipment Internally Generates, Uses or Operates or Synchronizes (MHz) Upper End of Measurement Frequency Range (MHz) 10k 100k 150k 500k 1M 5M 10M 30M 100M Frequency [Hz] [Radiated Interference] 30 1.705 to 108 1000 108 to 500 2000 500 to 1000 5000 Over 1000 Maximum Frequency's Fifth Harmonic or 40GHz, Whichever is Lower Field Strength [dBµV/m] 90 Less than 1.705 Noise level is regulated up to lower frequency of the 5th harmonics of maximum signal frequency and 40GHz. 70 50 49.5 40 54 43.5 46 60 class A 56.9 54 class B 30 10M 30M 88M100M 216M 960M1G Frequency [Hz] On the border frequency, lower limit should be applied. Class A Equipment : The digital equipment that is sold to in the commercial, industrial and office use. Class B Equipment : The digital equipment that is sold to be used in residential area. (3)There is no regulation on power interference. [FCC Regulations] Part 1 Part 2 Part 15 Part 18 Part 22 Part 68 Part 76 Procedures Frequency Division and Radio Wave Treaty Issues and General Rules Radio Wave Equipment • Intentionally electromagnetic radiation equipment • Non-intentionally electromagnetic radiation equipment • Incidentally electromagnetic radiation equipment Industrial, Scientific and Medical Equipment Public Mobile Wireless Operations Connecting Terminal Equipment to Telephone Circuit Network Cable Television Continued on the following page. 155 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, !Note • Please Please read read rating rating and and !CAUTION !CAUTION (for (for storage, storage, operating, operating, rating, rating, soldering, soldering, mounting mounting and and handling) handling) in in this this PDF catalog to prevent smoking and/or burning, etc. etc. you are requested approvespecifications. our product specifications or to transact for product before ordering. • This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe ourapproval productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Outlines of Major Noise Regulation Standards Continued from the preceding page. 6. Immunity Regulations in Europe Union All electric/electronic equipment cannot be sold in Europe without CE marking. To use CE marking, they must satisfy related EC directives such as EMC directives. For Information Technology Equipment, in EMC directive, emission regulations are integrated, and immunity regulations are applied. Although these immunity regulations are prepared by CENELEC, almost all contents are same as standards issued by IEC or CISPR. All products which are sold in EU must satisfy EC directive which contains immunity regulation. Principal EC Directive EMC Directive 89/336/EEC 92/31/EEC Low-Voltage Electrical Products Directive 73/23/EEC Machines Directive 89/392/EEC 7. Immunity Regulations in Japan Equipment TV,Radio,Audio ITE Association JEITA (Japan Electronis and Information Technology) Office Machine JBMIA (Japan Business Machine and Information System Industries Association) Mi CIAJ (Communication and Information network Association of Japan) ARIB (Association of Radio Industories and Business) Machine To Builders JMTBA (Japan Machine Tool Builders' Association) Industrial Measuring Control Equipment JEMIMA (Japan Electric Measuring Instruments Manufacturers' Association) Industrial Robot JARA (Japan Robot Association) The table on the right shows the preparation situation of JIS for EMC. At this moment, the immunity standards by JIS does not have a legal force like Electrical Application and Material Safety Law/VCCI. Classification Information Regulation JIS Terms ISO60050-161 (IEV terms 161) JIS C 0161 Basic Standard Generic Standard 156 IEC61000-4- 2 IEC61000-4- 3 IEC61000-4- 4 IEC61000-4- 5 IEC61000-4- 6 IEC61000-4- 7 IEC61000-4- 8 IEC61000-4-11 IEC61000-4-14 IEC61000-4-17 IEC61000-6-1 IEC61000-6-2 JIS C 1000-4-2 JIS C 1000-4-3 JIS C 1000-4-4 JIS C 1000-4-5 JIS C 1000-4-6 JIS C 1000-4-7 Under preparation C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, !Note • Please Please read read rating rating and and !CAUTION !CAUTION (for (for storage, storage, operating, operating, rating, rating, soldering, soldering, mounting mounting and and handling) handling) in in this this PDF catalog to prevent smoking and/or burning, etc. etc. you are requested approvespecifications. our product specifications or to transact for product before ordering. • This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe ourapproval productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Noise Suppression Principles by DC EMIFILr 1. Function of DC EMI Suppression Filters DC EMI suppression filters absorb and eliminate high frequency noise which may produce electromagnetic interference in PC board circuits. These filters are used in secondary circuits, and are small in size and light in weight, which further enhances their excellent noise suppression functions. Chip and adhesive type filters can be mounted on PC boards automatically. These filters are effective in the suppression of radiation noise in computers, peripheral equipment, and digital circuit application equipment (including various types of microcomputer application equipment), and function to suppress noise in audio/visual equipment, which uses digital memory chips and DSP. These filters are also effective for improving the noise immunity of equipment used in noisy environments (such as electronic equipment for automobiles). 2. Noise Filter Suppression Principles Generally, noise problems occur when the noise source and electronic equipment sensitive to the influence of noise are located in close proximity to one another. In such situations, as shown in Figure at right, noise is conducted through a conductor, which produces an inductive field around the noise source. To overcome such noise problems, it is preferable to reduce the amount of noise generated by the noise source or improve the noise resistance of adjacent equipment. In order to satisfy equipment performance specifications and eliminate noise effectively at the same time, however, it is customary to reduce the amount of noise generated by the noise source, if it can't be eliminated altogether. [EMI Propagation Mode and Model of Noise Filter Suppression] r q EMI Source Equipment or Device Affected by EMI e w qConduction mode eConduction mode Radiation mode wRadiation mode rRadiation mode Conduction mode r EMI Filter q EMI Source EMI Filter EMI Filter e EMI Filter Equipment or Device Affected by EMI w Shield Shield 3. Configuration of EMI Suppression Filters (DC) DC EMI suppression filters are used to suppress noise produced by conductors. Noise radiation can be suppressed, if it is eliminated with a filter in advance. Generally, such noise suppression is achieved with DC EMI suppression filters, according to the capacitive and inductive frequency characteristics of the respective conductors in the circuit. Filters of this kind can be roughly divided into those : (1) employing a capacitor, (2) employing an inductor, (3) employing a capacitor and inductor combination. Continued on the following page. 157 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, !Note • Please Please read read rating rating and and !CAUTION !CAUTION (for (for storage, storage, operating, operating, rating, rating, soldering, soldering, mounting mounting and and handling) handling) in in this this PDF catalog to prevent smoking and/or burning, etc. etc. you are requested approvespecifications. our product specifications or to transact for product before ordering. • This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe ourapproval productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Noise Suppression Principles by DC EMIFILr Continued from the preceding page. 4. Capacitive Noise Suppression When a capacitor is connected (bypass capacitor) to ground from a noisy signal line or power line, the circuit impedance decreases as the frequency increases. Since noise is a high frequency phenomenon, it flows to ground if a capacitor has been connected to ground, thereby making it possible to eliminate noise. (See Fig.) EMI suppression filters employing a capacitor in this way are used to eliminate this type of noise. 5. High frequency Capacitor Characteristics Used for EMI Suppression Filters Even general-purpose capacitors can be used for noise suppression. However, since noise has an extremely high frequency range, general-purpose capacitors may not function as effective bypass capacitors, due to the large residual inductance built into the capacitor. All the capacitors used in MURATA's EMI suppression filters employ a 3 terminal structure or thru-type structure, which functions effectively even at high frequencies, thereby minimizing the influence of residual inductance. Consequently, an effective filter circuit can be formed even at frequencies exceeding 1GHz. (Refer to Fig.) [Capacitive Noise Suppression] Noise+Signal/DC Power Noise Z = 1 2πfc Signal/DC Power f : Frequency c : Capacitance Value [Equivalent circuit of general-purpose capacitor and 3 terminal capacitor in the high frequency area and comparison of insertion loss] (a) Construction of capacitor 2-terminal capacitor 3-terminal capacitor Dielectric Electrode Dielectric Electrode Lead Lead (b) Equivalent circuit of capacitors which is concerning ESL effect. (c) Improvement of Insertion Loss Characteristics Insertion Loss [dB] 0 C=2200pf 20 3(B term (D uilt- inal SS in c 9H Bea apa B3 d) cito 2E r 22 2Q 55 ) 40 60 80 1 5 r l cito na pa 55) mi itor a r c Q e l 2 2-t pac ina E22 ca erm B32 3-t N9H S (D Idea Cha l r capa acteristi c of citor 10 50 100 Frequency [MHz] 500 1000 6. Inductive Noise Suppression When an inductor is inserted in series in a noise producing circuit (See Fig.), its impedance increases with frequency. In this configuration it is possible to attenuate and eliminate noise components (high frequency components). The MURATA EMI suppression filter functions in this way. [Inductive Noise Suppression] Noise Noise+Signal/DC Power Z =2πfL Signal/DC Power f : Frequency L : Capacitance Value Continued on the following page. 158 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, !Note • Please Please read read rating rating and and !CAUTION !CAUTION (for (for storage, storage, operating, operating, rating, rating, soldering, soldering, mounting mounting and and handling) handling) in in this this PDF catalog to prevent smoking and/or burning, etc. etc. you are requested approvespecifications. our product specifications or to transact for product before ordering. • This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe ourapproval productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Noise Suppression Principles by DC EMIFILr Continued from the preceding page. General-purpose inductors also function to suppress noise when configured in series with a noise producing circuit. However, when general-purpose inductors are used, resonance may result in peripheral circuits, signal wave forms may become distorted, and satisfactory impedance may not be obtained at noise frequencies (due to insufficient high frequency impedance characteristics). The inductors used for MURATA's EMI suppression filters are designed to function nearly as a resistor at noise frequencies, which greatly reduces the possibility of resonance and leaves signal wave forms undistorted. And since sufficient impedance is obtained for frequencies ranging to hundreds of MHz, these specifically designed inductors operate effectively to suppress high-frequency noise. (See Fig.) [Equivalent Circuit] R(f) (Resistance element becomes dominant at high frequency.) [Example of impedance frequency characteristics of inductor type EMIFILr] BL02RN2 160 140 120 Impedance [Ω] 7. Characteristics of Inductors Used in EMI Suppression Filters Z 100 R 80 60 40 X 20 0 0.5 1 2 5 10 20 50 100 200 500 1000 Frequency [MHz] 8. Capacitive-Inductive EMI Suppression Filters If capacitive and inductive suppression characteristics are combined, it is possible to configure a much higher performance filter. In signal circuit applications where this combination is applied, noise suppression effects which have little influence on the signal wave form become possible. This type of filter is also effective in the suppression of high-speed signal circuit noise. When used in DC power circuits, capacitive-inductive filters prevent resonance from occurring in peripheral circuits, thus making it possible to achieve significant noise suppression under normal service conditions. 9. Other EMI Suppression Filters In addition to the capacitive-inductive filter, MURATA also has an EMI suppression filter (EMIGUARDr) combining a capacitor with a varistor, useful for surge absorption; and a common mode choke coil effective, for common mode noise suppression. MURATA also has a range of built-in filter connectors which greatly reduce filter mounting space requirements. Continued on the following page. 159 C31E9.pdf 03.3.12 catalog to prevent smoking and/or burning, !Note • Please Please read read rating rating and and !CAUTION !CAUTION (for (for storage, storage, operating, operating, rating, rating, soldering, soldering, mounting mounting and and handling) handling) in in this this PDF catalog to prevent smoking and/or burning, etc. etc. you are requested approvespecifications. our product specifications or to transact for product before ordering. • This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe ourapproval productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Noise Suppression Principles by DC EMIFILr Continued from the preceding page. 10. Expressing EMI Suppression Filter Effects EMI Suppression Filter effects are expressed in terms of the insertion loss measured in the circuit, normally specified in MIL-STD 220A. As shown in the 50Ω impedance circuit in the Figure at right, insertion loss is represented by the logarithmic ratio of the circuit output voltage with and without a filter in the circuit, which is multiplied by 20 and expressed in dB. Therefore, an insertion loss of 20dB indicates an output voltage ratio (B/C) of 1/10, and an insertion loss of 40dB indicates an output voltage ratio (B/C) of 1/100. [Measuring Circuit of Insertion Loss] Measuring Circuit of Insertion Loss 50Ω (a) B(V) A(V) 50Ω (b) A(V) EMI Suppression Filter C(V) Insertion Loss = 20 log B (dB) C 160 50Ω 50Ω C31E9.pdf 03.3.12 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. Murata EMI Filter Selection Simulator Ver.2.5.0 Recommended Chip Ferrite Beads Search procedure has been added 1 Select circuit. (Select a new simulation circuit from File menu.) • Simulation results with various charts are quickly displayed on your PC. • Results can be displayed in standard format or user defined scaling. • Simulates various types of circuit such as Differential ModeTransmission, ceramic capacitor, EMIFILr three terminal capacitor AND chip ferrite beads. • Provides a simulation function that select best suited Chip Ferrite Beads. 1 2 3 4 Set Driver IC. Select filter. 4 9 Set Receiver IC. 7 Click measuring point. 4 3 5 7 6 Filters can be selected from "frequency-impedance characteristics" charts. Set Transmission Line. 6 2 Select a new simulation circuit from File menu. (EMI filters or/and chip capacitor from the pulldown list.) 5 Select circuit. Enter "Input Signal". Simulation results are shown in the window. 8 Two ways of setting the driver/receiver IC parameter Impedance automatically calculated. The logic IC of TTL and CMOS can be selected from pull-down list or the LCR values can also be created. Impedance characteristics of transmission line are automatically calculated. Find Find Recommended Recommended Ferrite Ferrite Beads Beads (Only for chip ferrite bead) NEW The software will recommend the most appropriate ferrite beads solution based on specified search condition. 8 Click "Start Simulation" button. 9 Simulation results are displayed. The recommended parts will be displayed along with electrical characteristics, the voltage waveform and spectrum chart. EMIFILr is the trademark of Murata Manufacturing Co., Ltd. This simulator can be downloaded from Murata web site. http://www.murata.com/emi/ 161 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. C31E9.pdf 03.3.12 Note: 1. Export Control For customers outside Japan Murata products should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive weapons (nuclear weapons, chemical or biological weapons, or missiles), or any other weapons. For customers in Japan For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required for export. < < > > 2. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially high reliability for the prevention of defects which might directly damage to a third party's life, body or property, or when one of our products is intended for use in applications other than those specified in this catalog. q Aircraft equipment w Aerospace equipment e Undersea equipment r Power plant equipment t Medical equipment y Transportation equipment (vehicles, trains, ships, etc.) u Traffic signal equipment i Disaster prevention / crime prevention equipment o Data-processing equipment !0 Application of similar complexity and/or reliability requirements to the applications listed in the above 3. Product specifications in this catalog are as of January 2003. They are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product engineers. 4. Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 5. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 6. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned above under licenses without our consent. 7. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process. http://www.murata.com/ Head Office 2-26-10, Tenjin Nagaokakyo-shi, Kyoto 617-8555, Japan Phone: 81-75-951-9111 International Division 3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: [email protected]