rev. page 1 of 5 date 02/2010 DESCRIPTION: panel mount optical encoder PART NUMBER: C14 ELECTRICAL SPECIFICATIONS supply voltage supply current output code 5 V dc ±5% (optional: 3.3 V dc ±10%) 20 mA max. (open collector) 2-bit Quadature, Channel A leads Channel B by 90° with clockwise rotation 100 mW 22.5° for code change and 16 detent positions 11.25° for code change and 32 detent positions power consumption angle of throw MECHANICAL SPECIFICATIONS operational torque mounting torque shaft strength without detent 16 position w/detent 32 position w/detent radial thrust rotational life weight (approx) 0.2 N·cm (20.4 gf·cm max.) 0.4 ±0.2 N·cm (40.8 ±20.4 gf·cm) 0.4 ±0.2 N·cm (40.8 ±20.4 gf·cm) 100 N·cm (10.2 kgf·cm) 10 N (1.02 kgf) 15 N (1.53 kgf) 1,000,000 cycles 11 g PUSH SWITCH SPECIFICATIONS rated voltage contact resistance insulation resistance voltage proof operating force travel bounce life 12 V dc, 50 mA 200 mΩ max. 100 mΩ min. 250 V ac for 1 minute 4.5 ± 1 N (459 ±102 g·f) 0.5 ±0.3 mm 10 msec. 1,000,000 ENVIRONMENTAL SPECIFICATIONS operating temp. range storage temp. range vibration shock cold proof heat proof change to temp. humidity 0° to +60° C -20 ~ 80°C frequency range: 10 ~ 55 Hz, peak to peak amplitude: 1.5 mm 50 G for 11 ms, half sine wave -20°C for 96 hours 80°C for 96 hours -10 ~ 70°C for 30 minutes each 90 ~ 95% for 96 hours at 40°C 20050 SW 112th Ave. Tualatin, Oregon 97062 phone 503.612.2300 fax 503.612.2383 rev. page 2 of 5 date 02/2010 DESCRIPTION: panel mount optical encoder PART NUMBER: C14 ORDERING INSTRUCTIONS C14 X XX X - X X X X Detent: D = with detent N = without detent Input voltage: “blank” = 5 V input 3 = 3.3 V input Angle of throw: 16 = 22.5° for code change and 16 detent positions 32 = 11.25° for code change and 32 detent positions Push switch: P = with push switch N = without push switch CIRCUIT CONNECTION Termination: A = ø 0.5 mm holes B = 130 mm cable with connector C = with header I D = with header II E = horizontal PCB F = vertical PCB Waterproof: “blank” = standard A = IP65 Shaft diameter: 1 = 3.175 mm (1/8”) 2 = 6 mm 3 = 6.35 mm (1/4”) WATER PROOF MOUNTING Protects against ingress of water from mounting panel side only. 2KP 0Q 8 (3.3 V optional) 4 176276 # 4 176276 $ 4 59+6%* 59+6%* )0& ڎ 9CVGT RTQQH YCUJGT 2CPGN 6QQVJGF NQEM YCUJGT 0WV 㧖44'ZVGTPCN RWNNWR TGUKUVQTU -ǡ OUTPUT WAVEFORM %9 1WVRWV # 1WVRWV $ ψ 2QUKVKQP 1WVRWV # $ 㧖8 OCZ 8 OKP 㧖6JG EQFG TGRGCVU HTQO VQ 20050 SW 112th Ave. Tualatin, Oregon 97062 phone 503.612.2300 fax 503.612.2383 rev. page 3 of 5 date 02/2010 DESCRIPTION: panel mount optical encoder PART NUMBER: C14 OPTIONS #ǾOOJQNGU ＣＵＩＩＮＣ JQNG $OO ECDNG YKVJ EQPPGEVQT Mounting Hole Dimensions (for A, B, and C) ＣＵＩＩＮＣ Ǿ r JQNG Mounting panel thickness: 3.5 mm max. %100'%614 #/2 20 /#6+0)%100'%614 #/2 20 %*GCFGTΣ Ǿ ＣＵＩＩＮＣ r (QQVRTKPVHQT% 2%$QCTF r Ǿ &*GCFGTΤ Mounting Hole dimensions and Footprint for D (±0.5 mm) Mounting panel thickness: 3.5 mm max. r r Ǿ ＣＵＩＩＮＣ Ǿ 20050 SW 112th Ave. Tualatin, Oregon 97062 phone 503.612.2300 fax 503.612.2383 Ǿ rev. page 4 of 5 date 02/2010 DESCRIPTION: panel mount optical encoder PART NUMBER: C14 OPTIONS CONTINUED '*QTK\QPVCN2%$ / 2 / R % /QWPVKPI DQCTF Ǿ r ＣＵＩＩＮＣ OCZ Ǿ Ǿ 2KP 0Q V Ǿ /# /#% 2%$OQWPVKPI JQNG FKOGPUKQPU XKGYGF HTQO OQWPVKPI UKFG Mounting Hole Dimensions (for E and F) / 2 % / R V /:2 /#% OCZ r Ǿ 2KP 0Q ＣＵＩＩＮＣ Ǿ Ǿ Ǿ r Ǿ Mounting panel thickness: 3.5 mm max. (8GTVKECN2%$ 2%$OQWPVKPI JQNG FKOGPUKQPU XKGYGF HTQO OQWPVKPI UKFG 20050 SW 112th Ave. Tualatin, Oregon 97062 phone 503.612.2300 fax 503.612.2383 rev. page 5 of 5 date 02/2010 DESCRIPTION: panel mount optical encoder PART NUMBER: C14 MECHANICAL DRAWING 3.175 mm 9KVJ 5YKVEJ 9KVJQWV 5YKVEJ / 2 / 2 / R / R % Ǿ Ǿ Ǿ Ǿ % ＣＵＩＩＮＣ ＣＵＩＩＮＣ OCZ JQNG 2KP 0Q r OCZ JQNG 2KP 0Q r 6.0 mm 9KVJ 5YKVEJ 9KVJQWV 5YKVEJ / 2 Ǿ / 2 Ǿ / R / R Ǿ Ǿ % % ＣＵＩＩＮＣ ＣＵＩＩＮＣ OCZ OCZ 2KP 0Q r JQNG 2KP 0Q JQNG r 6.35 mm 9KVJ 5YKVEJ 9KVJQWV 5YKVEJ / 2 / 2 / R / R r OCZ 2KP 0Q ＣＵＩＩＮＣ r r r % % ＣＵＩＩＮＣ r JQNG OCZ 2KP 0Q r 20050 SW 112th Ave. Tualatin, Oregon 97062 phone 503.612.2300 fax 503.612.2383 JQNG