Series 72 Convoluted Tubing 121-015 Type F Series 72 Annular Convoluted Tubing Thermally Stabilized Kynar® 121-015-16 H TYPE F TWO EXTERNAL TIN/COPPER BRAIDS AND JACKET Product Series Jacket Material: E = EPDM H = Hypalon® N = Neoprene V = Viton Basic No. Dash No. (Table I) JACKET OUTER SHIELD INNER SHIELD A DIA B DIA LENGTH (AS SPECIFIED IN FEET) MINIMUM BEND RADIUS TABLE I DASH A DIA B DIA MINIMUM NO. MIN MAX MIN MAX BEND RADIUS * 09 .24 (6.1) .28 (7.1) .62 (15.7) .66 (16.8) .75 (19.1) 12 .33 (8.4) .37 (9.4) .72 (18.3) .76 (19.3) 1.00 (25.4) 16 .45 (11.4) .50 (12.7) .84 (21.3) .90 (22.9) 1.38 (35.1) 20 .57 (14.5) .62 (15.7) .95 (24.1) 1.01 (25.7) 1.69 (42.9) 24 .69 (17.5) .75 (19.1) 1.12 (28.4) 1.18 (30.0) 1.88 (47.8) 28 .81 (20.6) .87 (22.1) 1.24 (31.5) 1.32 (33.5) 2.00 (50.8) 32 .93 (23.6) 1.00 (25.4) 1.36 (34.5) 1.44 (36.6) 2.38 (60.5) 40 1.18 (30.0) 1.25 (31.8) 1.60 (40.6) 1.68 (42.7) 2.88 (73.2) * The minimum bend radius is based on Type A construction (see page E-3). For multiple-braided coverings, these minimum bend radii may be increased slightly. Metric dimensions (mm) are in parentheses. Note: Tubing supplied in random lengths. For specific size lengths, consult factory. © 2003 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] E-8