AVX CB042E0394

Film Chip Capacitors
PET-HT DIELECTRIC – CB Series
GENERAL DESCRIPTION
Film chip capacitor using a naked and stacked construction with
metallized High Temperature PET (polyethylene terephtalate).
ADVANTAGES
APPLICATIONS
General purpose function in low voltage applications where
miniaturization and SMD is required. Typical applications
would be:
• Automotive (Airbag, Fuel injection calculator...)
• Telecom (Public switching systems, modems, telephone
set, cordless, mobile)
• Industrial (SMPS, Power convertor module...)
• Use of high temperature dielectric films makes these
capacitors suitable for IR or vapor phase reflow processes.
This chip is built without specific encapsulation.
• The intrinsic elasticity of the dielectric film allows an
excellent compatibility of the capacitor with all types of
material for printed circuit boards.
• The self-healing property of film technology results to a
safety open failure mode and better overall reliability.
• Excellent thermal shock resistance.
• Low dissipation factor ESR & ESL.
• No piezoelectric effect.
• Available in tape and reel suitable for automatic placement.
• Non-polar construction.
Outer Layer
Termination Plating :
100% matte Sn
Ni Barrier Under
Termination
Silver Epoxy
Resin
Brass
Active Layers : PET dielectric
PERFORMANCE CHARACTERISTICS
Climatic Category
Capacitance Range
Tolerance on CR
Nominal Voltages
Test Voltage
Soldering methods
Tangent of Loss Angle at 1kHz (DF)
Insulation resistance minimum : IR
Temperature range
A.C. applications
10
55/125/56
10nF to 4.7μF
±5%, ±10%
63Vdc to 630Vdc
1.4Vr 2 sec. at 25°C
IR or vapor phase reflow (not suitable for wave soldering)
< 100 x 10-4
for C ≤ 0.33μF IR > 1000 MΩ at 20°C for 1 min. charge at 10Vdc
for VR < 100Vdc and 100Vdc for VR ≥ 100Vdc
for C > 0.33μF IR C > 400 sec. at 20°C for 1 min. charge at 10Vdc
for VR < 100Vdc and 100Vdc for VR ≥ 100Vdc
-55°C to 125°C with voltage derating of 1.25%/°C between 105°C and 125°C
for high frequency A.C. application please check with AVX
Film Chip Capacitors
PET-HT DIELECTRIC – CB Series
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
W
H
T
millimeters (inches)
L
VOLTAGE Vdc: 63V Vac: 40V
Capacitance
Range
(CR)
0.270μF
0.330μF
0.390
0.470
0.560
0.680
0.820
1μF
1.5
2.2
3.3
4.7μF
Ordering
Code
L
5.8
(0.228)
CB042D0334+ -5.80
(0.228)
CB042D0394++ -- 5.80
(0.228)
CB042D0474+ -5.80
(0.228)
CB042D0564+ -5.80
(0.228)
CB042D0684+ -5.80
(0.228)
CB052D0824+ -7.2
(0.283)
CB052D0105+ -7.2
(0.283)
CB052D0155+ -7.20
(0.283)
CB162D0225+ -10.5
(0.413)
CB172D0335+ -12.8
(0.503)
CB182D0475+ -15.3
(0.601)
CB042D0274+ --
0.180μF
CB042E0184+ --
0.220μF
CB042E0224+ --
0.270μF
CB042E0274 +--
0.330
CB042E0334+ --
0.390
CB042E0394+ --
0.470
CB042E0474+ --
0.560
CB052E0564+ --
0.680
CB052E0684+ --
0.820
CB052E0824+ --
1μF
CB052E0105+ --
1.5
CB162E0155+ --
5.8
(0.228)
5.80
(0.228)
5.8
(0.228)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
7.20
(0.283)
7.20
(0.283)
7.20
(0.283)
7.20
(0.283)
10.5
(0.413)
Chip Dimensions
*Tolerances
(page 6)
W
H max
5.0
2.8
(0.195) (0.110)
5.00
3.30
(0.195) (0.130)
5.00
3.40
(0.195) (0.134)
5.00
3.50
(0.195) (0.138)
5.00
3.50
(0.195) (0.138)
5.00
4.00
(0.195) (0.158)
6.1
3.7
(0.24)
(0.146)
6.1
3.7
(0.24)
(0.146)
6.10
5.30
(0.240) (0.209)
7.6
5.8
(0.299) (0.229)
10.2
5.50
(0.401) (0.216)
13.7
4.90
(0.539) (0.193)
5.0
(0.195)
5.00
(0.195)
5.0
(0.195)
5.00
(0.195)
5.00
(0.195)
5.00
(0.195)
6.10
(0.240)
6.10
(0.240)
6.10
(0.240)
6.10
(0.240)
7.60
(0.299)
2.3
(0.091)
3.30
(0.130)
3.4
(0.134)
4.00
(0.158)
3.90
(0.154)
4.30
(0.169)
4.20
(0.165)
5.00
(0.197)
4.70
(0.185)
5.70
(0.224)
6.10
(0.240)
Tape Dimensions
T
0.8
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.8
(0.032)
0.8
(0.032)
0.80
(0.032)
0.8
(0.032)
0.80
(0.032)
0.80
(0.032)
W
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
24.0
(0.944)
24.0
(0.944)
16.0
(0.629)
24.0
(0.944)
24.0
(0.944)
24.0
(0.944)
0.8
(0.032)
0.80
(0.032)
0.8
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
16.0
(0.629)
16.0
(0.629)
16.0
(0.629)
16.0
(0.629)
24.0
(0.944)
P1
K0
8.0
3.1
(0.315) (0.122)
8.00
3.45
(0.315) (0.136)
8.00
3.45
(0.315) (0.136)
8.00
4.10
(0.315) (0.162)
8.00
4.10
(0.315) (0.162)
8.00
4.10
(0.315) (0.162)
12
3.8
(0.472) (0.149)
12
3.8
(0.472) (0.149)
12.0
5.50
(0.472) (0.216)
12
6.19
(0.472) (0.244)
16.0
5.70
(0.629) (0.224)
24.0
5.50
(0.944) (0.216)
VOLTAGE Vdc: 100V
8.0
2.43
(0.315) (0.096)
8.00
3.45
(0.315) (0.136)
8.0
3.45
(0.315) (0.136)
8.00
4.10
(0.315) (0.161)
8.00
4.10
(0.315) (0.161)
8.0
4.50
(0.315) (0.177)
12.0
4.80
(0.472) (0.189)
12.0
5.23
(0.472) (0.206)
12.0
4.80
(0.472) (0.189)
12.0
5.90
(0.472) (0.232)
12.0
6.19
(0.472) (0.244)
Reel Dimensions
A
W1
W2 max
330
12.4
18.4
(12.99) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
330
24.4
30.4
(12.99) (0.96)
(1.196)
330
24.4
30.4
(12.99) (0.96)
(1.196)
330
16.4
22.4
(12.99) (0.645) (0.881)
330
24.4
30.4
(12.99) (0.96)
(1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
Vac: 63V
330
12.4
18.4
(12.99) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
330
16.4
22.4
(12.99) (0.645) (0.881)
330
16.4
22.4
(12.99) (0.645) (0.881)
330
16.4
22.4
(12.99) (0.645) (0.881)
330
16.4
22.4
(12.99) (0.645) (0.881)
330
24.4
30.4
(12.99) (0.961) (1.196)
Packaging Unit
Reel
Pkg
Code
Bulk
1500
Reel
3000
1500
2800
BC
1500
2800
BC
1500
2300
BC
1500
2300
BC
1500
2300
BC
1000
2250
BC
1000
2250
BC
1000
1000
BC
500
900
BC
300
700
BC
300
500
BC
1500
3500
BC
1500
3000
BC
1500
2800
BC
1500
2300
BC
1500
2300
BC
1500
1900
BC
1000
1800
BC
1000
1100
BC
1000
1800
BC
1000
900
BC
500
900
BC
BC
Replace the + by the tolerance code:
J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BC = tape & reel
11
Film Chip Capacitors
PET-HT DIELECTRIC – CB Series
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
W
H
T
millimeters (inches)
L
VOLTAGE Vdc: 100V Vac: 63V
Capacitance
Range
(CR)
Ordering
Code
2.2
CB172E0225+ --
3.3
CB182E0335+ --
4.7μF
CB182E0475+ --
0.047μF
CB042G0473+ --
0.056
CB042G0563+ --
0.068
CB042G0683+ --
0.082
CB042G0823+ --
0.1μF
CB042G0104+ --
0.120
CB052G0124+ --
0.150
CB052G0154+ --
0.180
CB052G0184+ --
0.220
CB052G0224+ --
0.270
CB162G0274+ --
0.330
CB162G0334+ --
0.390
CB162G0394+ --
0.470
CB162G0474+ --
0.560
CB172G0564+ --
0.680
CB172G0684+ --
0.820
CB182G0824+ --
1μF
CB182G0105+ --
1.5
CB182G0155+ --
Chip Dimensions
*Tolerances
(page 6)
L
W
H max
T
12.8
10.2
5.50
0.80
(0.503) (0.401) (0.216) (0.032)
15.3
13.7
5.20
0.80
(0.601) (0.539) (0.204) (0.032)
15.3
13.7
7.10
0.80
(0.601) (0.539) (0.279) (0.032)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
7.20
(0.283)
7.20
(0.283)
7.20
(0.283)
7.20
(0.283)
10.5
(0.413)
10.5
(0.413)
10.5
(0.413)
10.5
(0.413)
12.8
(0.503)
12.8
(0.503)
15.3
(0.601)
15.3
(0.601)
15.3
(0.601)
5.00
(0.195)
5.00
(0.195)
5.00
(0.195)
5.00
(0.195)
5.00
(0.195)
6.10
(0.240)
6.10
(0.240)
6.10
(0.240)
6.10
(0.240)
7.60
(0.299)
7.60
(0.299)
7.60
(0.299)
7.6
(0.299)
10.2
(0.402)
10.2
(0.402)
13.7
(0.539)
13.7
(0.539)
13.7
(0.539)
3.00
(0.118)
3.60
(0.142)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.30
(0.169)
4.30
(0.169)
5.10
(0.200)
4.90
(0.193)
4.80
(0.189)
5.60
(0.220)
5.40
(0.213)
6.15
(0.241)
5.60
(0.220)
6.50
(0.255)
5.10
(0.201)
6.00
(0.236)
7.00
(0.276)
Replace the + by the tolerance code:
J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BC = tape & reel
12
Tape Dimensions
W
24.0
(0.944)
24.0
(0.944)
24.0
(0.944)
P1
K0
16.0
5.70
(0.629) (0.224)
24.0
5.50
(0.944) (0.216)
24.0
7.60
(0.944) (0.299)
VOLTAGE Vdc: 250V
0.80
12.0
8.00
3.10
(0.032) (0.472) (0.315) (0.122)
0.80
12.0
8.00
4.10
(0.032) (0.472) (0.315) (0.161)
0.80
12.0
8.00
4.10
(0.032) (0.472) (0.315) (0.161)
0.80
12.0
8.00
4.10
(0.032) (0.472) (0.315) (0.161)
0.80
12.0
8.00
4.10
(0.032) (0.472) (0.315) (0.161)
0.80
16.0
12.0
4.80
(0.032) (0.629) (0.472) (0.189)
0.80
16.0
12.0
4.80
(0.032) (0.629) (0.472) (0.189)
0.80
16.0
12.0
5.23
(0.032) (0.629) (0.472) (0.206)
0.80
16.0
12.0
5.23
(0.032) (0.629) (0.472) (0.206)
0.80
24.0
12.0
6.19
(0.032) (0.944) (0.472) (0.244)
0.80
24.0
12.0
6.19
(0.032) (0.944) (0.472) (0.244)
0.80
24.0
12.0
6.19
(0.032) (0.944) (0.472) (0.244)
0.80
24.0
12.0
6.19
(0.032) (0.944) (0.472) (0.244)
0.80
24.0
16.0
5.70
(0.032) (0.944) (0.629) (0.225)
0.80
24.0
16.0
7.00
(0.032) (0.944) (0.629) (0.275)
0.80
24.0
24.0
5.50
(0.032) (0.944) (0.944) (0.217)
0.80
24.0
24.0
6.30
(0.032) (0.944) (0.944) (0.248)
0.80
24.0
24.0
7.60
(0.0315) (0.944) (0.944) (0.299)
Reel Dimensions
A
W1
W2 max
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
Vac: 160V
330
12.4
18.4
(12.99) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.448) (0.724)
330
16.4
22.4
(12.99) (0.645) (0.881)
330
16.4
22.4
(12.99) (0.645) (0.881)
330
16.4
22.4
(12.99) (0.645) (0.881)
330
16.4
22.4
(12.99) (0.645) (0.881)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
Packaging Unit
Reel
Pkg
Code
Bulk
300
Reel
700
300
500
BC
300
300
BC
1500
3000
BC
1500
2300
BC
1500
2300
BC
1500
2300
BC
1500
2300
BC
1000
1800
BC
1000
1800
BC
1000
1100
BC
1000
1100
BC
500
1100
BC
500
900
BC
500
900
BC
500
900
BC
300
700
BC
300
600
BC
300
500
BC
300
400
BC
300
300
BC
BC
Film Chip Capacitors
PET-HT DIELECTRIC – CB Series
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
W
H
T
millimeters (inches)
L
VOLTAGE Vdc: 400V Vac: 200V
Capacitance
Range
(CR)
Ordering
Code
0.010μF
CB042I0103+ --
0.012
CB042I0123+ --
0.015
CB042I0153+ --
0.018
CB052I0183+ --
0.022
CB052I0223+ --
0.027
CB052I0273+ --
0.033
CB052I0333+ --
0.047
CB052I0473+ --
0.056
CB162I0563+ --
0.068
CB162I0683+ --
0.082
CB162I0823+ --
0.100μF
CB162I0104+ --
0.120
CB172I0124+ --
0.150
CB172I0154+ --
0.180
CB172I0184+ --
0.220
CB172I0224+ --
0.270
CB172I0274+ --
0.330
CB182I0334+ --
0.470μF
CB182I0474+ --
0.010μF
CB042K0103+ --
0.012
CB042K0123+ --
0.015
CB042K0153+ --
0.018
CB052K0183+ --
L
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
7.2
(0.283)
7.2
(0.283)
7.2
(0.283)
7.2
(0.283)
7.20
(0.283)
10.5
(0.413)
10.5
(0.413)
10.5
(0.413)
10.5
(0.413)
12.8
(0.503)
12.8
(0.503)
12.8
(0.503)
12.8
(0.503)
12.8
(0.503)
15.3
(0.601)
15.3
(0.601)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
Chip Dimensions
*Tolerances
(page 6)
W
H max
5.00
3.00
(0.195) (0.017)
5.00
2.40
(0.195) (0.095)
5.00
4.00
(0.195) (0.158)
6.1
2.8
(0.240) (0.110)
6.1
3.5
(0.240) (0.138)
6.1
2.8
(0.240) (0.110)
6.1
3.3
(0.240) (0.130)
6.10
4.50
(0.240) (0.177)
7.60
3.10
(0.299) (0.122)
7.60
3.60
(0.299) (0.141)
7.60
4.20
(0.299) (0.165)
7.60
4.70
(0.299) (0.185)
10.2
3.90
(0.402) (0.154)
10.2
4.60
(0.402) (0.181)
10.2
5.60
(0.402) (0.220)
10.2
6.80
(0.402) (0.265)
10.2
6.80
(0.402) (0.265)
13.7
5.60
(0.539) (0.220)
13.7
6.20
(0.539) (0.244)
5.00
(0.195)
5.00
(0.195)
5.00
(0.195)
6.10
(0.240)
2.80
(0.110)
3.30
(0.130)
4.00
(0.158)
2.80
(0.110)
Tape Dimensions
T
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.8
(0.032)
0.8
(0.032)
0.8
(0.032)
0.8
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
W
P1
K0
12.0
8.00
3.10
(0.472) (0.315) (0.122)
12.0
8.00
2.43
(0.472) (0.315) (0.096)
12.0
8.00
4.10
(0.472) (0.315) (0.161)
16.0
12
3.8
(0.629) (0.472) (0.150)
16.0
12
3.8
(0.629) (0.472) (0.150)
16.0
12
3.8
(0.629) (0.472) (0.150)
16.0
12
3.8
(0.629) (0.472) (0.150)
16.0
12.0
4.80
(0.629) (0.472) (0.189)
24.0
12.0
3.93
(0.944) (0.472) (0.155)
24.0
12.0
3.93
(0.944) (0.472) (0.155)
24.0
12.0
6.19
(0.944) (0.472) (0.244)
24.0
12.0
6.19
(0.944) (0.472) (0.244)
24.0
16.0
4.00
(0.944) (0.629) (0.157)
24.0
16.0
4.70
(0.944) (0.629) (0.185)
24.0
16.0
7.00
(0.944) (0.629) (0.274)
24.0
16.0
7.00
(0.944) (0.629) (0.274)
24.0
16.0
7.00
(0.944) (0.629) (0.274)
24.0
24.0
6.30
(0.944) (0.944) (0.248)
24.0
24.0
6.30
(0.944) (0.944) (0.248)
VOLTAGE Vdc: 630V
12.0
8.00
3.10
(0.472) (0.315) (0.122)
12.0
8.00
3.10
(0.472) (0.315) (0.122)
12.0
8.00
4.10
(0.472) (0.315) (0.161)
24.0
12.0
3.80
(0.944) (0.472) (0.149)
Reel Dimensions
A
W1
W2 max
330
12.4
18.4
(12.99) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
330
16.4
22.4
(12.99) (0.645) (0.881)
330
16.4
22.4
(12.99) (0.645) (0.881)
330
16.4
22.4
(12.99) (0.645) (0.881)
330
16.4
22.4
(12.99) (0.645) (0.881)
330
16.4
22.4
(12.99) (0.645) (0.881)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
Vac: 250V
330
12.4
18.4
(12.99) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
330
24.4
30.4
(12.99) (0.961) (1.196)
Packaging Unit
Reel
Pkg
Code
Bulk
1500
Reel
3000
1500
3500
BC
1500
2300
BC
1000
2250
BC
1000
2250
BC
1000
2250
BC
1000
2250
BC
1000
1800
BC
500
1400
BC
500
1400
BC
500
900
BC
500
900
BC
300
1100
BC
300
900
BC
300
600
BC
300
600
BC
300
600
BC
300
400
BC
300
400
BC
1500
3000
BC
1500
2800
BC
1500
2300
BC
1000
2250
BC
BC
Replace the + by the tolerance code:
J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BC = tape & reel
13
Film Chip Capacitors
PET-HT DIELECTRIC – CB Series
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
W
H
T
millimeters (inches)
L
VOLTAGE Vdc: 630V Vac: 250V
Capacitance
Range
(CR)
Ordering
Code
0.022
CB052K0223+ --
0.027
CB052K0273+ --
0.033
CB052K0333+ --
0.047
CB162K0473+ --
0.056
CB162K0563+ --
0.068
CB162K0683+ --
0.082
CB172K0823+ --
0.100μF
CB172K0104+ --
0.120
CB172K0124+ --
0.150
CB172K0154+ --
0.180
CB182K0184+ --
0.220
CB182K0224+ --
0.270μF
CB182K0274+ --
L
7.20
(0.283)
7.20
(0.283)
7.20
(0.283)
10.5
(0.413)
10.5
(0.413)
10.5
(0.413)
12.8
(0.503)
12.8
(0.503)
12.8
(0.503)
12.8
(0.503)
15.3
(0.601)
15.3
(0.601)
15.3
(0.601)
Chip Dimensions
*Tolerances
(page 6)
W
H max
6.10
3.50
(0.240) (0.138)
6.10
4.10
(0.240) (0.161)
6.10
5.00
(0.240) (0.197)
7.60
3.60
(0.299) (0.141)
7.60
4.30
(0.299) (0.169)
7.60
5.20
(0.299) (0.205)
10.2
4.30
(0.402) (0.169)
10.2
5.00
(0.402) (0.197)
10.2
5.60
(0.402) (0.220)
10.2
6.90
(0.402) (0.271)
13.7
5.00
(0.539) (0.197)
13.7
5.80
(0.539) (0.229)
13.7
7.20
(0.539) (0.284)
Replace the + by the tolerance code:
J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BC = tape & reel
14
Tape Dimensions
T
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
W
24.0
(0.944)
16.0
(0.629)
16.0
(0.629)
24.0
(0.944)
24.0
(0.944)
24.0
(0.944)
24.0
(0.944)
24.0
(0.944)
24.0
(0.944)
24.0
(0.944)
24.0
(0.944)
24.0
(0.944)
24.0
(0.944)
P1
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
16.0
(0.629)
16.0
(0.629)
16.0
(0.629)
16.0
(0.629)
24.0
(0.944)
24.0
(0.944)
24.0
(0.944)
K0
3.80
(0.149)
4.80
(0.189)
4.80
(0.189)
3.93
(0.155)
6.19
(0.244)
6.19
(0.244)
4.70
(0.185)
5.70
(0.225)
5.70
(0.225)
7.00
(0.275)
5.50
(0.217)
6.30
(0.248)
7.60
(0.299)
Reel Dimensions
A
330
(12.99)
330
(12.99)
330
(12.99)
330
(12.99)
330
(12.99)
330
(12.99)
330
(12.99)
330
(12.99)
330
(12.99 )
330
(12.99 )
330
(12.99)
330
(12.99)
330
(12.99)
W1
W2 max
24.4
30.4
(0.961) (1.196)
16.4
22.4
(0.645) (0.881)
16.4
22.4
(0.645) (0.881)
24.4
30.4
(0.961) (1.196)
24.4
30.4
(0.961) (1.196)
24.4
30.4
(0.961) (1.196)
24.4
30.4
(0.961) (1.196)
24.4
30.4
(0.961) (1.196)
24.4
30.4
(0.961) (1.196 )
24.4
30.4
(0.961) (1.196 )
24.4
30.4
(0.961) (1.196)
24.4
30.4
(0.961) (1.196)
24.4
30.4
(0.961) (1.196)
Packaging Unit
Reel
Pkg
Code
Bulk
1000
Reel
2250
1000
1800
BC
1000
1100
BC
500
1400
BC
500
900
BC
500
900
BC
300
900
BC
300
700
BC
300
700
BC
300
600
BC
300
500
BC
300
400
BC
300
300
BC
BC
Film Chip Capacitors
PET-HT DIELECTRIC – CB Series
MOUNTING AND SOLDERING RECOMMENDATIONS
SOLDERING PROFILE
The capacitors can be mounted using infrared and vapor phase soldering following recommended below. They are NOT
suitable for wave soldering.
All temperature refer to topside of the package, measured on the package body surface.
150°C
200°C
180 sec. max
217°C
75 sec. max
245°C
10 sec.
10 sec.
6°C / sec.
6°C / sec.
Ramp up
Tp - 5ºC
TL
150°C
200°C
180 sec. max
217°C
60 sec. max
240°C
tp
Tp
2220 to 2824
4030 to 6054
3°C / second max 3°C / second max
Ts max
Temperature (ºC)
Profile Feature
Ramp-Up (Ts max to Tp)
Preheat
- Temperature Min (Ts min)
- Temperature Min (Ts max)
- Time (ts min to ts max)
Time maintained above
- Temperature (TL)
- Time (tL)
Peak temperature (Tp)
Time within 5°C of peak
temperature (tp)
Ramp-Down
tL
Ts min
Ramp
down
tS
0
30
60
90
120
150
180
210
240
270
300
330
Time (seconds)
*Reflow soldering referring to JEDEC Standard with some limitations
*JEDEC J-Std 020C
RECOMMENDED SOLDER PASTE THICKNESS
For optimum solderability, the recommended soldering
paste thickness: 2220 to 2824 :150 to 200µm
4030 to 6054 :200 to 300µm
C
In case of hand soldering, the temperature of the soldering
iron should not be above 250°C. Special care must be taken
to avoid touching the capacitor body with the iron tip.
B
PAD DIMENSIONS: millimeters (inches)
A
Size Code
Case Size
04
05
16
17
18
2220
2824
4030
5040
6064
A
5.00
6.00
7.50
11.2
14.6
B
(0.195)
(0.234)
(0.295)
(0.441)
(0.575)
1.90
2.50
3.00
3.50
3.60
(0.075)
(0.098)
(0.118)
(0.137)
(0.147)
C
4.50
5.70
8.00
10.3
12.6
(0.178)
(0.224)
(0.315)
(0.406)
(0.496)
RECOMMENDED CLEANING
OTHER CAUTIONS
To clean flux from the PC board assembly, the recommended
products are: ethanol, isopropyl alcohol, and deionized water
wash. The cleaning products to avoid are: Toluene, Xylene,
Trichloroethylene, Terpene Cleaner EC-7, surface active
agent. In case of using another solvent, please contact us.
Flame retardancy: the dielectric film is not a flame retardant
material.
Environment: contact us when chips are used in humid or
gas atmosphere and /or when using resin.
Recommended handling: do not use edged tools, so not
to damage the capacitors.
TIN WHISKERS TESTS : JEDEC STANDARD NO 22A121
Stress Type
Ref. Spec.
Temperature cycling
JESD22-A104
Ambient Temperature /
Humidity Storage
High Temperature /
Humidity Storage
Test Conditions
-55°C +85(+10/-0)°C air
5 to 10 minutes soak 3 cycles/hour
Analysis
Results
SEM x 1000
Pass
30+/-2°C - 60+/-3% RH -2000H
SEM x 1000
Pass
70+/-5°C - 93+3/-2% RH -1000H
SEM x 1000
Pass
15
Film Chip Capacitors
PET-HT DIELECTRIC – CB Series
ELECTRICAL CHARACTERISTICS VERSUS TEMPERATURE AND FREQUENCY
ELECTRICAL CHARACTERISTICS
FREQUENCY CHARACTERISTICS
Capacitance
10
8
4
⌬C/C vs TEMPERATURE
Capacitance
⌬C/C 20°C (%)
3
6
2
4
1
2
0
0
-1
-2
-2
-4
-3
-6
-4
-8
-55˚C -30˚C
-5˚C
+20˚C +45˚C +70˚C +95˚C +120˚C
-5
0.1
Temperature
1
Dissipation Factor
10
100
FREQUENCY (kHz)
1000
Dissipation Factor
400
160
DF 20°C (10 -4)
DC/C
= (temperature)
DF (1kHz)
vs TEMPERATURE
140
300
D.F. (10 -4)
120
100
200
80
60
100
40
0
20
0.1
1
-55˚C -30˚C
-5˚C
100
10
0
1000
FREQUENCY (kHz)
+20˚C +45˚C +70˚C +95˚C +120˚C
Temperature
Insulation Resistance
10000.0
Z (mOhm)
Impedance
1000.00
100nF
IR vs TEMPERATURE
IR(G.ohm)
1000.0
100.00
100.0
47 nF
220 nF
10.0
10.00
100 nF
470 nF
1µF
1.0
4.7µF
0.1
-55˚C -30˚C
-5˚C
+20˚C +45˚C +70˚C +95˚C +120˚C
Temperature
16
1.00
1.00
10.00
FREQUENCY (MHz)
Film Chip Capacitors
PET-HT DIELECTRIC – CB Series
RMS VOLTAGE AND CURRENT VERSUS FREQUENCY
MAXIMUM VOLTAGE (VRMS) AND CURRENT (IRMS) VS FREQUENCY
Typical curves results from measurement carried out at ambient temperature (25ºC) and sinusoidal wave-forms
(for size CB04 to CB18)
45
40
35
30
25
20
15
10
5
0
63Vdc / 40 Vac
5
4.7µF 1.5µF 0.47µF
4.5
4
I rms (A)
V rms (V)
63Vdc / 40 Vac
4.7µF
3.5
3
1.5µF
2.5
2
0.47µF
1.5
1
0.1
1
10
100
1000
0.5
0
0.1
10000
FREQUENCY (kHz)
1
10
100
1000
10000
1000
10000
FREQUENCY (kHz)
100 Vdc / 63 Vac
100 Vdc / 63 Vac
70
4.7µF
1.5µF
0.22µF
60
40
I rms (A)
V rms (V)
50
30
20
10
0
0.1
1
10
100
1000
10000
FREQUENCY (kHz)
6.5
6
5.5
5
4.5
4
3.5
3
2.5
2
1.5
1
0.5
0
0.1
4.7µF
1.5µF
0.22µF
1
10
100
FREQUENCY (kHz)
250 Vdc / 160 Vac
1µF
0.47µF
0.1µF
120
100
80
60
40
20
0
0.1
I rms (A)
V rms (V)
180
160
140
250 Vdc / 160 Vac
1
10
100
FREQUENCY (kHz)
1000
10000
6
5.5
5
4.5
4
3.5
3
2.5
2
1.5
1
0.5
0
0.1
1µF
0.47µF
0.1µF
1
10
100
1000
10000
FREQUENCY (kHz)
17
Film Chip Capacitors
PET-HT DIELECTRIC – CB Series
RMS VOLTAGE AND CURRENT VERSUS FREQUENCY
MAXIMUM VOLTAGE (VRMS) AND CURRENT (IRMS) VS FREQUENCY
Typical curves results from measurement carried out at ambient temperature (25ºC) and sinusoidal wave-forms
(for size CB04 to CB18)
220
200
180
160
140
120
100
80
60
40
20
0
0.1
0.47µF
0.1µF
400 Vdc / 200 Vac
1
0.01µF
0.47µF
I rms (A)
V rms (V)
400 Vdc / 200 Vac
0.5
0.1µF
0.01µF
1
10
100
1000
0
0.1
10000
1
10
FREQUENCY (kHz)
0.27µF
0.1µF
1000
10000
0.27µF
0.5
0.1µF
0.01µF
1
10
100
1000
10000
0
0.1
1
10
100
FREQUENCY (kHz)
MAXIMUM PULSE RISE TIME (DV/DT)
18
10000
1
0.01µF
FREQUENCY (kHz)
Voltage Range
Dv/dt max.
(V/µsec)
1000
630 Vdc / 250 Vac
I rms (A)
V rms (V)
630 Vdc / 250 Vac
280
260
240
220
200
180
160
140
120
100
80
60
40
20
0
0.1
100
FREQUENCY (kHz)
63
100
250
400
630
40
50
150
200
250
Film Chip Capacitors
PET-HT DIELECTRIC – CB Series – RoHS
MATERIALS CONTROLLED BY ROHS (PPM BY WEIGHT):
Mass / unit (g)
Lead
Mercury
Cadmium
CB range
RoHS Limit (ppm)
Pass/Fail
0
1000
Pass
0
1000
Pass
0
100
Pass
Hexavalent
Chromium
0
1000
Pass
PBB
PBDE
0
1000
Pass
0
1000
Pass
This product has been tested and found to be compliant with all requirements, provisions, and exemptions of EU Directive 2002/95/EC of the European Parliament and
Council of January 27, 2003. On the Restriction of use of certain Hazardous Substances (RoHS) in electrical and electronic equipment and EU Directive 2000/53/EC
regarding ELV or End of Life Vehicle.
ROHS / ELV STATUS
External Plating
100% Matte Sn as standard
LEAD-FREE STATUS / MOISTURE
SENSITIVITY RANKING
Pb Free Reflow Solder compliant, MSL = 3.
Reflow soldering referring to Jedec Standard with some
limitations. Additional JESD-97 data to be phased in MSL
e3 termination.
PRODUCT LABELING:
PRODUCT TRACEABILITY:
(For informational purposes only to be phased in on reel and
container.)
Full internal material traceability by reference to unique lot
number marked on reel and external package.
Pb Free:
RoHS Compliant:
19