CBR Series High Temperature Bondable Thick Film Chip Resistors • • • • • • • • Resistances from 10Ohms to 1TOhms AgPd Termination for face-down assembly Gold Termination for face-up assembly Power Rating 0.05 to 0.25Watt Resistance Tolerances to ± 5% TCR’s to ± 50 ppm/°C Non-Magnetic Special HT version to 300°C* SPECIFICATIONS Type 0402 0603 0805 1206 Power Rating ( W )1 0.05 0.10 0.125 0.25 Working Voltage ( VAC ) 60 150 200 400 Resistance Range (W) Tolerances Available ( % ) Temperature Coefficients Available ( ± ppm/°C )2 (lower TCR upon request) Voltage Coefficients Available ( ± ppm/V ) 10R - 10M 5% to 20% TCR100 / 250 5% to 20% TCR50 / 100 5% to 20% TCR50 / 100 5% to 20% TCR50 / 100 >10M - 100M 5% to 20% TCR100 / 250 500 ppm/V 5% to 20% TCR50 / 100 500 ppm/V 5% to 20% TCR50 / 100 500 ppm/V 5% to 20% TCR50 / 100 250 ppm/V >100M - 1G 10% to 30% TCR500 / 1000 1000 ppm/V 5% to 20% TCR250 / 500 1000 ppm/V 5% to 20% TCR250 / 500 1000 ppm/V 5% to 20% TCR100 / 250 250 ppm/V >1G - 10G 10% to 30% TCR2000 2000 ppm/V 5% to 20% TCR500 / 1000 2000 ppm/V 5% to 20% TCR500 / 1000 2000 ppm/V 5% to 20% TCR250 / 500 500 ppm/V >10G - 100G 10% to 30% TCR2000 5000 ppm/V 10% to 30% TCR2000 / 3000 5000 ppm/V 10% to 30% TCR2000 / 3000 5000 ppm/V 5% to 20% TCR500 / 1000 2000 ppm/V >100G - 1T - 20% to 50% TCR3000 10000 ppm/V 10% to 30% TCR3000 10000 ppm/V 10% to 30% TCR2000 5000 ppm/V TCR in ppm/°C; +25°C to +125°C TCR below standard TCR (highest value) and values >100G; +25°C to +85°C VCR: typical values, all negative, not for all TCR values available 1 2 Specification Value Temperature Range -55°C to +155°C -55°C to +300°C* (HT Version) Climactic Cetegory 55 / 155 / 56 W @ 70 °C / 0W @ 155 °C 50 PPM : +25 °C to +85 °C *Customer responsible for suitable high temperature connections Riedon Inc. 300 Cypress Avenue 06/13 Alhambra CA 91801 (626) 284-9901 (626) 284-1704 www.riedon.com CBR Series High Temperature Bondable Thick Film Chip Resistors SPECIFICATIONS (continued) Max DR Long Term Stability <10M 10M - 1G 1G - 10G >10G Storage 125°C / 1000h < 0.5% < 1% < 2% < 5% Max. Voltage / 1000h < 0.5% < 0.5% < 1% < 2% Short term overload < 0.25% - - - Dimensions Type L B D Minmum Bondpad Size CBR 0402 0.041 +0.002 [ 1.04 +0.05 ] 0.020 +0.002 [ 0.50 +0.05 ] 0.012 +0.006 / -0.002 [ 0.3 +0.15 / -0.05 ] 0.006 x 0.006 [ 0.15 x 0.15 ] CBR 0603 0.060 +0.006 / -0.002 [ 1.5 +0.15 / -0.05 ] 0.030 +0.006 / -0.002 [ 0.8 +0.15 / -0.05 ] 0.016 +0.006 / -0.002 [ 0.4 +0.15 / -0.05 ] 0.008 x 0.008 [ 0.20 x 0.20 ] CBR 0805 0.080 +0.006 / -0.002 [ 2.0 +0.15 / -0.05 ] 0.050 +0.006 / -0.002 [ 1.25 +0.15 / -0.05 ] 0.016 +0.006 / -0.002 [ 0.4 +0.15 / -0.05 ] 0.010 x 0.010 [ 0.25 x 0.25 ] CBR 1206 0.126 +0.006 / -0.002 [ 3.2 +0.15 / -0.05 ] 0.060 +0.008 / -0.002 [ 1.5 +0.2 / -0.05 ] 0.016 +0.006 / -0.002 [ 0.4 +0.15 / -0.05 ] 0.012 x 0.012 [ 0.30 x 0.30 ] (larger sizes upon request) Power Derating Curve 120 Packaging: HT r Ve 60 sio 40 n ard Tape width 8mm / Reel Diameter 180 or 330mm Minimum quantity Bulk / 100 pieces per value Minimum quantity Tape & Reel / 1000 pieces per value Waffle Pack (for 0402, other sizes depending on volume) nd 80 Sta Power ( % ) 100 Bulk or Blistertape to IEC 60286-3 (not 0402) 20 0 0 50 100 150 200 250 300 350 Ambient Temperature (°C) Ordering Information Part Description: Part Type - Resistance - Tolerance - TCR - Packaging - Termination Example: CBR 0603 1 Ohm 5% 100ppm Tape Gold ( Note: Without specification of TCR, Packaging, or Termination, the default is highest TCR, bulk packaging, and AgPd termination) Riedon Inc. 300 Cypress Avenue 06/13 Alhambra CA 91801 (626) 284-9901 (626) 284-1704 www.riedon.com