FEATURES / BENEFITS p Ultra slim design, less than 1/2” (13mm) high p 70% lumen maintenance @ 50,000+ hr life @ 25ºC ambient temperature CL2 SERIES p Low energy use, no IR or UV emissions p Modular “quick connect” system for easy installation p Designed for even LED spacing over linear runs, no hotspots or dark spots between fixtures p Cool to touch, suitable for direct mounting on flammable surfaces p Onboard constant current driver with low voltage input p ETL listed to UL standards for dry locations Frosted Lens Version p Utilizes the latest high efficiency LED technology APPLICATIONS The CL2 Series is designed for use in a wide range of lighting applications, especially areas which benefit from its ultra slim profile, low energy and long operating life. Designed around the latest LED technology, the CL2 series represents true innovation in lighting, delivered in a package which blends seamlessly into it’s surroundings. Sample applications include, but not limited to: Cove and cornice lighting, shelf lighting, integrated into furniture, under counters, stair hand rails, display cases, task lighting. MATERIALS/FINISH OPERATING CONDITIONS p Ambient temperature -20ºC to +40ºC (-4ºF to +104ºF) p Anodized aluminum module base with polycarbonate lens p Input voltage 24VDC. Use only class 2 power supplies p Plug & play connector system p Power consumption 5.3W per module Does not include power supply losses p Onboard constant current driver p Max # of modules connected per run = 20. Up to 16 modules can be operated on a 100W power supply p 20AWG, PTFE cable - UL rated E213967, 300V, 80ºC p 4 high output 1W LEDs per module ORDERING INFORMATION Catalog Number (A) LED Color Typical CCT Min Luminous Typical Luminous Flux per Module Flux per Module (lumens) (lumens) CRI Cool White C 5000K 288 342 75 Neutral White N 4100K 242 288 75 Warm White W 3000K 204 242 75 High CRI Warm White Z 3000K 171 204 92 Lens (B) C = Clear F = Frosted Note: Special colors available, consult factory. LED data is LED manufacturers test data at 25ºC Tj. Light output at max acceptable ambient temp will be approximately 15-20% lower depending on the thermal conductivity of the mounting surface. Clear lens will reduce fixture light output by additonal 8-10%, and frosted lens by additional 30%. Connectors CL2-E2E = End to end module connector CL2-FLEX = 63mm / 2.5” flexible end to end connector CL2-EXTEND = 952mm / 37.5” flexible end to end connector Dialight Lumidrives York House • Weatherby Road • Long Marston, York, YO26 7NH Tel: 0845 6346161 • Fax: 0845 6346160 • www.dialight.com (sold separately) CL2-START = 3m / 9’ 10” start cable (supplies power to first module) CL2-END = End plug PRIVATE LABEL OEM PROGRAM Dialight Corporation 1501 Route 34 South • Farmingdale, NJ 07727 USA Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com MDEXLUMCL2_A MECHANICAL DIMENSIONS Dimensions in inches (mm) Requires Class 2 low voltage power supply (purchased separately) Total power consumption of modules should not exceed rating of power supply Observe minimum rating of power supply used PHOTOMETRIC DATA CL2 Module with Clear Lens (Normalized Data) 2 CL2 modules with start cable, end to end connector, and end plug 2 CL2 modules with start cable, flex connector, and end plug IES 32 files available - consult factory Dialight Lumidrives York House • Weatherby Road • Long Marston, York, YO26 7NH Tel: 0845 6346161 • Fax: 0845 6346160 • www.dialight.com Dialight reserves the right to make changes at any time in order to supply the best product possible. PRIVATE LABEL OEM PROGRAM Dialight Corporation 1501 Route 34 South • Farmingdale, NJ 07727 USA Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com MDEXLUMCL2_A