Card Connectors Series CN015 - Type 20 Direct Mounting, Screw Fixing (with Ejector) Insulation Resistance: Withstanding Voltage: Contact Resistance: Voltage Rating: Current Rating: Operating Temp. Range: 1,000MΩ min. at 500V DC 500V AC rms for 1 minute 40mΩ max. (initial resistance) excluding conductor resistance of terminal (25mΩ) 250V AC 0.5A –20°C to +60°C CN015 *Z - 20 0 1 - * Series No. Applications: RZ = 3.3V for SmartMedia Card (3.3V) PZ = 3.3V / 5V for SmartMedia Card (3.3V) and (5V) Materials and Finish Type 20 Contact: PB / Ni-AU Insulator Base: PPS PCB Mounting: 1 = Screw Lock Type (Screw ∅2.2mm See Note 1) Height of Stand-off: ***) 0 = A(0.00mm), B(4.80mm), C(2.80mm) 1 = A(2.00mm), B(6.80mm), C(4.80mm) Features Realizing smooth extraction of SmartMedia by ejection function Stand-off types are available to mount components under the body of CN015 Adapting sequential method to secure data protection by contacting in the order of Ground-Power-Signal correctly ***) Dimensions A, B and C are shown in drawings below. Type 20 with Screw Lock Recommended PCB Layout Top View PCB Mounting: Type 1 (Screw Lock) = ∅2.20 4-∅2.20 (Screw Lock) Note 1: Recommended screw - M2.0 x length (thickness of PC board thickness of flange +2.0mm) Special notice for operation: Never soak and wash after soldering. There are cases where SmartMedia can not be smoothly inserted because of flux remaining inside of the connector, after washing. Wash only part of the connector terminal on PC board. Function Table Part Number CN015RZ-2001-0 CN015RZ-2001-1 CN015PZ-2001-0 CN015PZ-2001-1 Voltage of SmartMedia Ejector Mis-insertion Protection Sequential Contact Write Protection Switch 3.3V Yes Yes Yes Yes 3.3V / 5V Yes No Yes Yes SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Connectors SmartMedia - SSFDC Part Number (Details) Specifications Card Connectors Series CN015 - Type 20 Direct Mounting, SMT Fixing (with Ejector) Part Number (Details) Specifications Insulation Resistance: Withstanding Voltage: Contact Resistance: Voltage Rating: Current Rating: Operating Temp. Range: 1,000MΩ min. at 500V DC 500V AC rms for 1 minute 40mΩ max. (initial resistance) excluding conductor resistance of terminal (25mΩ) 250V AC 0.5A –20°C to +60°C CN015 RZ - 20 0 3 - 0 Series No. RZ = 3.3V for SmartMedia Card (3.3V) Type 20 PCB Mounting: 3 = SMT Fixing Metal Pads Materials and Finish Height of Stand-off: ***) 0 = A(0.00mm), B(4.80mm), C(2.80mm) Contact: PB / Ni-Au Insulator Base: PPS (glass filled) black ***) Dimensions A, B and C are shown in drawings below. Features Realizing smooth extraction of SmartMedia by ejection function Stand-off types are available to mount components under the body of CN015 Adapting sequential method to secure data protection by contacting in the order of Ground-Power-Signal correctly Type 20 with SMT Metal Pads (3.3V) Recommended PCB Layout Top View Special notice for operation: Never soak and wash after soldering. There are cases whereSmartMedia can not be smoothly inserted because of flux remaining inside of the connector, after washing. Wash only part of the connector terminal on PC board. Function Table Part Number CN015RZ-2003-0 Connectors Voltage of SmartMedia Ejector 3.3V Yes Mis-insertion Protection Yes Sequential Contact Write Protection Switch Yes SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Yes