Brad® Foundation Fieldbus Cordsets and Receptacles FEATURES AND SPECIFICATIONS Molex releases the Brad Mini-Change and Micro-Change molded connection systems for fast, error-free Foundation Fieldbus installations Foundation Fieldbus is a communication protocol used to interconnect field-level instrumentation and control devices to a PLC (Programmable Logic Controller) or DCS (Distributed Control System) controller in a process automation control system. Foundation Fieldbus is employed in the control systems of oil & gas production, refineries, petrochemical plants, chemical manufacturing and pharmaceutical manufacturing. At the physical-layer level, Foundation Fieldbus allows multiple devices to communicate digitally over the same wire. The Foundation Fieldbus physical layer, i.e., cable/transmission signal requirements, is specified in the ISA SP50.02 and IEC 1158-2 standard for fieldbuses. The cable specifications are listed in the Cable Standard FF-844 , which is issued by the Fieldbus Foundation, the organization that controls and maintains this open standard. Brad Foundation Fieldbus products from Molex are fully complaint to these specifications. Brad Foundation Fieldbus products from Molex are based on the proven Mini-Change and Micro-Change circular, circular connector families. These sealed, watertight connectors offer the ruggedness required in the most demanding industrial applications. The pre-wired, keyed connectors provide a modular wiring system that is not prone to field wiring termination errors. For additional product information visit: www.molex.com/link/fieldbus.html. 130041 Mini-Change® FF Cordsets 130042 Micro-Change® FF Cordsets 130040 Micro-Change & Mini-Change FF Receptacles 130045 Micro-Change & Mini-Change Tees 130044 Micro-Change & Mini-Change Field Attachables Features and Benefits n Mini-Change and Micro-Change are proven, rugged connector designs n IP67-rated connectors provide a dust-tight and water-tight connection n Quick-connect, modular wiring system with keyed, pre-wired molded connectors provide fast installation that eliminates field wiring errors n Foundation Fieldbus ‘Type A’ compliant shielded cables allows users to take full advantage of the maximum run lengths possible per the protocol while minimizing the potential for communication errors SPECIFICATIONS Mini-Change Micro-Change Electrical Voltage (max.): 300V AC/DC Amperage (max.): 10A Initial Contact Resistance: < 5mΩ avg. @ 3 Resistance after Durability Testing: < 5mΩ avg. @ 3 Electrical Voltage (max.): 250V AC / DC Amperage (max.): 4A Initial Contact Resistance: < 5mΩ avg. @ 3 Resistance after Durability Tests: < 5mΩ avg. @ 3 Mechanical Molded Body: PVC Insert: PVC Contact: Patented, Quad-Beam Design. Brass with Gold Plate. Stainless Steel Outer Sleeve Coupling Nut / Receptacle Shell: 316 Stainless Steel or Nickel Plated Brass Axial Pull Strength: 100 lbs Side Load Strength: 20 lbs Mechanical Molded Body: PVC Insert: Nylon Contact: Brass with Gold Plate. O-ring: Viton Coupling Nut / Receptacle Shell: 316 Stainless Steel or Nickel Plated Brass Axial Pull Strength: 50 lbs. Side Load Strength: 20 lbs. Environmental Environmental Seal: IP67 Cable Temperature: -40° to +105°C (-40° to +221°F) Environmental Environmental Seal: IP67 Cable Temperature: -40° to +105°C (-40° to +221°F) n Stainless steel or nickel plated cordset coupling nuts and receptacle shells ensure corrosion resistance in demanding environments Brad® Foundation Fieldbus Cordsets and Receptacles APPLICATIONS Foundation Fieldbus is commonly found in the following Process Automation implementations: n Oil & Gas Production and Transportation Facilities n Oil Refineries n Petrochemical Complexes n Chemical Production Plants n Waste-Water Processing Plants n Pharmaceutical Manufacturing n Food & Beverage Processing ORDERING INFORMATION Mini-Change Cordsets with SS316 Coupling Nuts Single Ended Cordsets Fem-Str Fem-90D Female-Male Double Ended Cordsets Str-Str **Available Cable Options D07 18/3 Orange FF Shielded Cbl, w/gnd, w/drain, PVC D08 18/3 Blue FF Shielded Cbl, w/gnd, w/drain, PVC 130041 Mini-Change® FF Cordsets 130042 Micro-Change® FF Cordsets 130040 Micro-Change & Mini-Change FF Receptacles 130045 Micro-Change & Mini-Change Tees 130044 Micro-Change & Mini-Change Field Attachables SAP Material # Engineering Part # ** Description Sample Plant No. 3313 1300410016 104000D09M0208 MC 4P FP STR SS316 CNUT #18-2 FF Cable – 2M 1300410017 104000D09M0508 MC 4P FP STR SS316 CNUT #18-2 FF Cable – 5M 1300410018 104000D09M1008 MC 4P FP STR SS316 CNUT #18-2 FF Cable – 10M 1300410019 104001D09M0208 MC 4P FP 90 SS316 CNUT #18-2 FF Cable – 2M 1300410020 104001D09M0508 MC 4P FP 90 SS316 CNUT #18-2 FF Cable – 5M 1300410021 104001D09M1008 MC 4P FP 90 SS316 CNUT #18-2 FF Cable – 10M 1300410028 114030D09M0068 MC 4P M/MFE STR/STR SS316 CNUT #18-2 FF Cable – 0.6M 1300410029 114030D09M0108 MC 4P M/MFE STR/STR SS316 CNUT #18-2 FF Cable – 1M 1300410030 114030D09M0208 MC 4P M/MFE STR/STR SS316 CNUT #18-2 FF Cable – 2M 1300410031 114030D09M0308 MC 4P M/MFE STR/STR SS316 CNUT #18-2 FF Cable – 3M 1300410032 114030D09M0408 MC 4P M/MFE STR/STR SS316 CNUT #18-2 FF Cable – 4M 1300410033 114030D09M0508 MC 4P M/MFE STR/STR SS316 CNUT #18-2 FF Cable – 5M N/A N/A 3313 N/A D09 18/2 Orange FF Shielded Cbl, w/o gnd, w/drain, PVC D10 18/2 Blue FF Shielded Cbl, w/o gnd, w/drain, PVC Mini-Change Receptacles and Accessories with Stainless Steel Hardware SAP Material # Female Receptacles Terminator Field Attachable Bulkhead Pass-Thru Description Sample Plant No. 1300400013 1R4000A42M0058 MC 4P F/FR #18 1/2NPT SSS316 – 0.5M 3313 1300400014 1R4006A42M0058 MC 4P MR #18 1/2NPT SS316 – 0.5M 3313 1300400015 1R4M36A42M0058 MC 4P MR #18 M20X1.5 SS316 – 0.5M N/A 1300460004 104006FF8 Mini-Change, Male FF terminator w/ SS316 CNUT 3313 1300450002 T140140-001FF8 TEE – MC In, MC Out, MC Drop w/ SS316 CNUT 3313 For Female 1302011110 65-0085SS MC Closure Cap for Female Connector – SS w/ bead chain 3313 For Male 1302011113 65-0086SS MC Closure Cap for Male Connector – SS w/ bead chain 3313 Female 1300440001 1A4000-34FF8 MC 4P F-ATTACH STR PG 13.55 FF w SS316 CNUT 3313 Male 1300440002 1A4006-34FF8 MC 4P M-ATTACH STR PG 13.55 FF w SS316 CNUT 3313 Fem-Male 1300131001 1R40301 MC 4P M/MFE BULKHEAD FEED – THRU - SS N/A Male Male Tee Closure Caps Engineering Part # Brad® Foundation Fieldbus Cordsets and Receptacles ORDERING INFORMATION 130041 Mini-Change® FF Cordsets 130042 Micro-Change® FF Cordsets 130040 Micro-Change & Mini-Change FF Receptacles 130045 Micro-Change & Mini-Change Tees 130044 Micro-Change & Mini-Change Field Attachables Micro-Change Cordsets with SS316 Coupling Nuts Single Ended Cordsets Single Ended Cordsets Double Ended Cordsets SAP Material # Engineering Part # ** Description Sample Plant No. 1300420030 804000D09M0208 MIC 4P FP STR SS316 CNUT #18-2 FF Cable – 2M 3313 1300420031 804000D09M0508 MIC 4P FP STR SS316 CNUT #18-2 FF Cable – 5M 1300420032 804000D09M1008 MIC 4P FP STR SS316 CNUT #18-2 FF Cable – 10M 1300420033 804001D09M0208 MIC 4P FP 90 SS316 CNUT #18-2 FF Cable – 2M Fem-90D 1300420034 804001D09M0508 MIC 4P FP 90 SS316 CNUT #18-2 FF Cable – 5M 1300420035 804001D09M1008 MIC 4P FP 90 SS316 CNUT #18-2 FF Cable – 10M Fem-Male 1300420042 884030D09M0068 MIC 4P M/MFE STR/STR SS316 CNUT #18-2 FF Cable – 0.6M 1300420043 884030D09M0108 MIC 4P M/MFE STR/STR SS316 CNUT #18-2 FF Cable – 1M 1300420044 884030D09M0208 MIC 4P M/MFE STR/STR SS316 CNUT #18-2 FF Cable – 2M 1300420045 884030D09M0308 MIC 4P M/MFE STR/STR SS316 CNUT #18-2 FF Cable – 3M 1300420046 884030D09M0408 MIC 4P M/MFE STR/STR SS316 CNUT #18-2 FF Cable – 4M 1300420047 884030D09M0508 MIC 4P M/MFE STR/STR SS316 CNUT #18-2 FF Cable – 5M Fem-Str Str-Str **Available Cable Options D07 18/3 Orange FF Shielded Cbl, w/gnd, w/drain, PVC D08 18/3 Blue FF Shielded Cbl, w/gnd, w/drain, PVC N/A N/A 3313 N/A D09 18/2 Orange FF Shielded Cbl, w/o gnd, w/drain, PVC D10 18/2 Blue FF Shielded Cbl, w/o gnd, w/drain, PVC Micro-Change Receptacles and Accessories with Stainless Steel Hardware SAP Material # Engineering Part # Description Sample Plant No. MIC 4P F/FR #18 1/2NPT – SS316 – 0.5M N/A Receptacle Female 1300400006 WR4000A42M0058 Receptacle Male 1300400007 WR4006A42M0058 MIC 4P MR# 18 1/2 NPT – SS316 – 0.5M 3313 Terminator Male 1300460008 804006FF8 Micro-Change, Male FF terminator w/SS316 CNUT 3313 1300350097 MICT5558 TEE – MIC In, MIC Out, MIC Drop w/ SS316 CNUT 3313 80014 Tee Closure Caps For Female 1200770065 Closure Caps For Male 1200770139 Bulkhead Feed-Thru Fem-Male 1200700408 M12 Closure Cap for Fem Connector, SS w/SS bead chain 3313 M12 Closure Cap for Male Connector, SS w/ SS bead chain 3313 MIC4P M/MFE BULKHEAD FEED-THRU-SS N/A 8R4L301 www.molex.com/link/fieldbus.html Americas Headquarters Lisle, Illinois 60532 U.S.A. 1-800-78MOLEX [email protected] Order No. 987650-2541 Asia Pacific North Headquarters Yamato, Kanagawa, Japan 81-46-265-2325 [email protected] Asia Pacific South Headquarters Jurong, Singapore 65-6268-6868 [email protected] USA/KC/2008.11 European Headquarters Munich, Germany 49-89-413092-0 [email protected] Corporate Headquarters 2222 Wellington Ct. Lisle, IL 60532 U.S.A. P: 630-969-4550 F: 630-9691352 © 2008, Molex