o Part Numbering CERALOCKr (MHz) (Part Number) CS T CE 16M0 q w e r 3 *** -R0 t y u i o V 5 qProduct ID yInitial Frequency Tolerance Product ID CS Ceramic Resonators wFrequency/Capacitance Code Design 5 ±0.5% 3 ±0.3% 2 ±0.2% Code Frequency/Capacitance 1 ±0.1% A MHz with No capacitance built-in H ±0.07% T MHz with Built-in Capacitance uLoad Capacity eStructure/Size Code Design Code Structure/Size 1 5/6pF LS Round Lead Type 2 10pF CC Cap Chip Type 3 15pF CR/CE/CG Small-cap Chip Type 4 22pF CV Monolithic Chip Type 5 30/33/39pF CW Small Monolithic Chip Type 6 47pF rNominal Center Frequency iIndividual Specification Expressed by four-digit alphanumerics. The unit is in hertz (Hz). Decimal point is expressed by capital letter "M". tDesign Code Individual Specification *** Three-digit alphanumerics express "Individual Specification". With standard products, "iIndividual Specification" is omitted. Code Design Gpp Thickness Shear mode oPackaging T/Vpp Thickness Expander mode Code Xpp Thickness Expander mode (3rd overtone) -B0 Bulk -A0 Radial Taping H0=18mm -R0 Plastic Taping ø=180mm -R1 Plastic Taping ø=330mm pp indicates initial frequency tolerance and load capacity. Packaging Radial taping is applied to lead type and plastic taping to chip type.