CX MINIATURE CRYSTALS CX-1V-03 EUROQUARTZ Telephone: +44(0)1460 230000 Fax: +44(0)1460 230001 Email: [email protected] Web: www.euroquartz.co.uk Page 10kHz to 600kHz MINIATURE QUARTZ CRYSTAL FOR PIERCE OSCILLATORS 1 of 2 ! ! ! ! ! ! ! General Description The CX-1V quartz crystal is a high quality tuning fork resonator designed for use in Pierce (single inverter) oscillators. The CX-1V is hermetically sealed in a rugged, miniature ceramic package, a quarter the size of an eight pin dual-in-line package. The crystal is manufactured utilizing a photo-lithographic process, ensuring consistency and repeatability of electrical characteristics. Miniature tuning-fork design High shock resistance Designed for low-power applications Compatible with hybrid packaging Low ageing Full military environmental testing available Ideal for battery powered applications Specification Frequency Range: Calibration Tolerance*: 0.7 Motional Resistance (R1): 7.6 2.0 3.8 8.1 Motional Capacitance (C1): Quality Factor (Q): Shunt Capacitance (C0): Drive Level: 3.8 Outline and Dimensions Turning Point (T0)**: Temperature Coefficient (k): Ageing, first year: Shock, survival***: Vibration, survival***: Operating Temperature: Equivalent Circuit L1 1 R1 C1 C0 L 1 Motional Inductance C 1 Motional Capacitance C0 Shunt Capacitance R 1 Motional Resistance Conventional HCMOS Pierce Oscillator Circuit Rf Amplifier CS C1 CX-1 2 Storage Temperature: Process Temperature: 10kHz to 600kHz A, B, or C (see table below) Figure 1 2x Typ. @ 10~169.9kHz 2.5x Typ. @170~600kHz Figure 2 Figure 3 (Minimum is 0.25x Typ.) 2.0pF max. 0.5µW max. @ 10~24.9kHz 1.0µW max. @ 25~600kHz Figure 4 -0.035ppm/°C2 ±5ppm max. 1,000g 1ms, ½ sine 20g rms 10 - 2,000Hz -10°~+70°C (commercial) -40°~+85°C (industrial) -55°~+125°C (military) -55°C~+125°C Lead to Package temp. not to exceed 175°C Glass lid to package seal rim temp. not to exceed 210°C Specifications are typical at 25°C unless otherwise indicated. * Closer calibration available ** Other turning point available *** Higher shock and vibration available CX-1V Crystal Calibration Tolerance at 25°C Buffer Osc. Freq. (Fo) RA C2 Calibration Frequency Range (kHz) 10~74.9 75~169.9 170~249.9 250~600 A ±0.003% ±0.005% ±0.01% ±0.02% B ±0.01% ±0.01% ±0.02% ±0.05% C ±0.1% ±0.1% ±0.2% ±0.5% Load Capacitance (CL) Used to Calibrate CX-1V) Frequency Range (kHz) Frequency Range (kHz) Load Cap. (pF) 10~15.9 11 55~99.9 8 16~24.9 10 100~179.9 5 25~54.9 9 180~600 4 Load Cap. (pF) (Other CL available) CX MINIATURE CRYSTALS CX-1V-03 EUROQUARTZ Telephone: +44(0)1460 230000 Fax: +44(0)1460 230001 Email: [email protected] Web: www.euroquartz.co.uk Page 10kHz to 600kHz MINIATURE QUARTZ CRYSTAL FOR PIERCE OSCILLATORS 2 of 2 Figure 2 - CX-1V Typical Motional Capacitance (C1) Circuit Design 5 Conventional HCMOS Pierce Oscillator Circuit C1 2 (fF) Rf Amplifier 1.0 Buffer 0.5 CS 10 Osc. Freq. (Fo) RA 20 50 100 200 600 Frequency (kHz) Figure 3 - CX-1V Typical Quality Factor (Q) C1 C2 CX-1 300 200 100 Figure 1 - CX-1V Typical Motional Resistance (R1) in '000s 50 300 200 R1 100 (k Ω ) 50 20 10 50 100 200 600 Frequency (kHz) Figure 4 - CX-1V Typical Turning Point Temp. (°C) 20 10 +80 +70 5 +60 +50 2 +40 10 50 100 200 600 To(°C) +30 Frequency (kHz) +20 + 10 0 - 10 Packaging -20 10 20 50 100 200 CX-1V-03 - Bulk Pack (Standard) Tray Pack (Optional) Note: Frequency (f) deviation from frequency (f0) @ turning point f-fo k(T-To)2 = fo Order Code Side leads CX-1V 600 Frequency (kHz) Frequency -03 32.768kHz (A / I) “S” if special Calibration or custom design Tolerance* Blank if standard @ 25°C (A) *For other calibrations (B) (C) insert value in ppm Temperature Range: C = Commercial I = Industrial M = Military S = Specify