ATC HIGH POWER Surface Mount Chip Terminations RESISTIVE PRODUCTS CZ12010T0050G & CZ12010T0050G02 CZ12525T0050G Style CZ1 General Specifications • Nominal Impedence: 50 Ω • Resistive Tolerance: ±2% standard • Operating Temp Range: -55 to +150˚C • Temperature Coefficient: ±150 ppm/˚C • Resistive Elements: Tantalum, Thin Film Processed • Substrate Material: Aluminum Nitride • Terminals: Silver over Nickel • Lead-Free, RoHS Compliant • Reliability: MIL-PRF-55342 • Tape and Reel Specifications: See Page 39 of full Resistive Products Catalog W L T LT WT LA Frequency VSWR Power Max* ±.010 ±.010 ±.005 ±.005 ±.005 ±.005 Range (GHz) (Typ.) (Watts) ATC Part Number CZ12010T0050G CZ12010T0050G02 CZ12525T0050G .100 .100 .245 .200 .200 .245 .040 .040 .040 .040 .020 .030 .090 .090 .125 .115 .140 .170 DC - 3.0 DC - 3.0 DC - 4.0 1.20:1 1.20:1 1.25:1 10W 10W 20W * Test Condition: Chip soldered to a via patch on a 30-mil-thick Rogers RO4350 board; Land surfaces at 100° C; maximum rated power applied. Specification: The resistance of the film shall change no more than 0.5% during and after a 1000-hr. Burn-in per Mil-PRF-55342. Power Derating ATC Part Number Code CZ1 2010 T 0050 J TR Power Dissipation 100% Case Style Packaging TR - Tape & Reel BK - Plastic Carrier Tolerance See table below. Value 80 Case Size 60 Rated Safe Operating Range Termination 40 20 0 -50˚C -25˚C 0˚C +25˚C +50˚C 75˚C 100˚C 125˚C Resistive Tolerances 150˚C Heat Sink Temperature (C) Code G (%) J (%) Tol. ±2 ±5 Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC document #001-992 Rev. B 12/05). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC's website at www.atceramics.com/productfinder/default.asp. Click on the link for Terms and Conditions of Sale. ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product without prior notice. © 2012 American Technical Ceramics Corp. All Rights Reserved. A M E R I C A N ATC North America [email protected] Excerpt from ATC # 001-944; Rev. R, 11/13 T E C H N I C A L C E R A M I C S ATC Europe [email protected] ATC Asia [email protected] www.at c er am ic s .c om ATC HIGH POWER Surface Mount Chip Terminations RESISTIVE PRODUCTS CZ13737T0050G CZ13725T0050G Style CZ1 General Specifications • Nominal Impedence: 50 Ω • Resistive Tolerance: ±2% standard • Operating Temp Range: -55 to +150˚C • Temperature Coefficient: ±150 ppm/˚C • Resistive Elements: Tantalum, Thin Film Processed • Substrate Material: Aluminum Nitride • Terminals: Silver over Nickel • Lead-Free, RoHS Compliant • Reliability: MIL-PRF-55342 • Tape and Reel Specifications: See Page 39 of full Resistive Products Catalog W L T LT WT LA Frequency VSWR Power Max* ±.010 ±.010 ±.005 ±.005 ±.005 ±.005 Range (GHz) (Typ.) (Watts) ATC Part Number CZ13725T0050G CZ13737T0050G .250 .370 .375 .370 .040 .040 .050 .050 .125 .125 .260 .275 DC - 2.2 DC - 3.0 1.20:1 1.25:1 30W 40W * Test Condition: Chip soldered to a via patch on a 30-mil-thick Rogers RO4350 board; Land surfaces at 100° C; maximum rated power applied. Specification: The resistance of the film shall change no more than 0.5% during and after a 1000-hr. Burn-in per Mil-PRF-55342. Power Derating ATC Part Number Code CZ1 2010 T 0050 J TR Power Dissipation 100% Case Style Packaging TR - Tape & Reel BK - Plastic Carrier Tolerance See table below. Value 80 Case Size 60 Rated Safe Operating Range Termination 40 20 0 -50˚C -25˚C 0˚C +25˚C +50˚C 75˚C 100˚C 125˚C Resistive Tolerances 150˚C Heat Sink Temperature (C) Code G (%) J (%) Tol. ±2 ±5 Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC document #001-992 Rev. B 12/05). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC's website at www.atceramics.com/productfinder/default.asp. Click on the link for Terms and Conditions of Sale. ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product without prior notice. © 2012 American Technical Ceramics Corp. All Rights Reserved. A M E R I C A N ATC North America [email protected] Excerpt from ATC # 001-944; Rev. R, 11/13 T E C H N I C A L C E R A M I C S ATC Europe [email protected] ATC Asia [email protected] www.at c er am ic s .c om