FEATURES / BENEFITS D264 SERIES RETROFIT ADAPTER Allows for simple retrofit onto existing incandescent fixture Eliminates the need to completely remove the old fixture Utilizies a simple socket based electrical interface. No wiring on the tower Rugged cast design Designed to interface with most existing fixtures in the market Reduces retrofit time for an LED Beacon to a small fraction of what would be required for a complete fixture removal APPLICATION The Dialight D264 Series retrofit adapter allows for simple retrofit of a new LED Beacon to an existing incandescent base eliminating the need to fully dismantle the old fixture. By simply removing the top half of the existing incandescent light, the retrofit adapter securely mounts to the existing hinge. Utilizing the fixed locating studs the new LED Beacon mounts simply on top. Power is supplied to the new beacon through a simple socket interface connection making it no more difficult then installing a new lamp. MATERIALS/FINISH The 264 Series Beacon Retrofit Adapter is designed for durability made from cast aluminum with all stainless steel hardware. ORDERING INFORMATION Product D264-3002 Dialight Europe Ltd. Exning Road, Newmarket, England, CB8 0AX Tel: +44 (0) 1638 666541 • Fax: +44 (0) 1638 561735 www.dialight-obstruction-lights.com A Subsidiary of Dialight PLC Description Retrofit Adapter Dialight Corporation 1501 Route 34 South • Farmingdale, NJ 07727 USA Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 www.dialight.com MDTF264RETRO_01 D264 SERIES RETROFIT ADAPTER MECHANICAL DRAWING Dialight Europe Ltd. Exning Road, Newmarket, England, CB8 0AX Tel: +44 (0) 1638 666541 • Fax: +44 (0) 1638 561735 www.dialight-obstruction-lights.com A Subsidiary of Dialight PLC Dialight Corporation 1501 Route 34 South • Farmingdale, NJ 07727 USA Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 www.dialight.com MDTF264RETRO_01