Surface Mount Detection Switch D3SH The smallest detection switch in the world. (OMRON’s data as of June 2006.) • Ultra small size and ultra low profile contributing to down-sizing of sets devices. (3.0 x 3.4 x 0.9 mm (W x D x H)) • A unique mechanism enables high contact reliability and high precision operation. • Horizontal 2-way detection and long stroke for easy installation are available. • Meet a variety of applications by contact and lever variations. Ordering Information Standard Lever Models Contact form Direction of Operation SPST-NO Right Positioning Boss With Boss Without Boss Left SPST-NC Right Left Long Lever Models Model Packing form D3SH-A1R Embossed tape packing D3SH-A0R (see note) With Boss D3SH-A1L Without Boss D3SH-A0L With Boss D3SH-B1R Without Boss D3SH-B0R With Boss D3SH-B1L Without Boss D3SH-B0L Note: Minimum packing unit is 1,000 pcs./reel. Contact form Direction of Operation SPST-NO Right Positioning Boss With Boss Without Boss Left SPST-NC Right Left Model Packing form D3SH-A1R1 Embossed tape packing (see note) D3SH-A0R1 With Boss D3SH-A1L1 Without Boss D3SH-A0L1 With Boss D3SH-B1R1 Without Boss D3SH-B0R1 With Boss D3SH-B1L1 Without Boss D3SH-B0L1 Note: Minimum packing unit is 1,000 pcs./reel. Model Number Legend D3SH 1 2 3 1. Contact Form A: SPST-NO B: SPST-NC 2. Boss for PCB Positioning 0: without Boss 1: with Boss 3. Lever Length and Direction of Operation R: Right Operating with standard lever L: Left Operating with standard lever R1: Right Operating with long lever L1: Left Operating with long lever Surface Mount Detection Switch D3SH 63 Specifications ■ Characteristics Electrical Rating (see note 3) 1 mA at 30 VDC (resistive) Operating speed 1 mm to 300 mm/s Operating frequency Mechanical: 20 operations/minute max. Electrical: 20 operations/minute max. Insulation resistance 100 MΩ min. (at 100 VDC) Contact resistance 3Ω max. Dielectric strength 100 VAC for 1 min between terminals of same polarity Vibration resistance (see note 2) Malfunction: 10 to 55 Hz, 1.5-mm double amplitude Shock resistance (see note 2) Destruction: 1000 m/s2 (approx. 100 G) max. Malfunction: 300 m/s2 (approx. 30 G) max. Life expectancy Mechanical: 150,000 operations min. (20 operations/minute) Electrical: 100,000 operations min. (20 operations/minute) Ambient operating temperature –25°C to 85°C (at 60% RH max.) with no icing or condensation Ambient operating humidity 85% max. (for 5°C to 35°C) Weight Approx. 0.02 g Note: 1. The data given above are initial values. 2. The values apply at the total travel position. Contact opening or closing time is within 1ms. 3. The electrical rating applies under the following test conditions: Ambient Temperature = 20±2°C, Ambient Humidity = 65±5%, Operating frequency = 30 operations/minute ■ Contact Specifications Contact Specification Slide Minimum applicable load 15 μA at 3 VDC Engineering Data ■ Contact form ■ Packaging Specifications SPST-NO Carrier tape (1.8) (18) Label Feed direction 12±0.30 COM N.O COM N.O Drawing direction φ13 Standard package Qty 1,000 pcs/reel SPST-NC Standards Conforms to JEITA Package COM N.C COM N.C Note: The cover connects with COM terminal inside. 64 Surface Mount Detection Switch D3SH Qty 1,000 pcs/reel Reel φ 380±2 Dimensions and Operating Characteristics Note: 1. Unless otherwise specified, all units are in millimeters and a tolerance of ±0.15 mm applies to all dimensions 2. The operating characteristics are for operation in the A direction (↓ ) and B direction (→ , ← ). ■ Standard Lever Models Model D3SH-@@R D3SH-@@L 31 gf 5.4 ± 0.2 mm 5.0 ± 0.2 mm 3.8 ± 0.15 mm Operating force (OF) max. Free position (FP) Operating position (OP) Total travel position (TTP) Right operating – without Boss D3SH-@0R A (0.9) 1.1 0.68 2.3 (2.2) R0.2 B TTP 0.25 3.1 0.8 FP OP center of rotation 0.4 0.4 0.55 1.65 1.1 1.65 2.2 4.4 3 0.9±0.05 0.39 PCB mounting land Dimension (Reference) (View from switch top) 0.5 0.36 z Left operating – without Boss D3SH-@0L A (0.9) (2.2) R0.2 0.68 1.1 2.3 B OP 0.25 TTP FP center of rotation 0.8 0.4 0.55 1.1 0.4 3.1 1.65 1.65 2.2 4.4 3 0.9±0.05 PCB mounting land Dimension (Reference) (View from switch top) 0.39 0.5 0.36 Right operating – with Boss D3SH-@1R A (0.9) 1.1 0.68 2.3 (2.2) R0.2 B 2-φ0.7 +0.07 0 center of rotation 0.4 0.25 0.8 3.1 2.8±0.07 0.4 0.55 2.8 1.65 2±0.05 1.1 TTP C0.15 2±0.1 FP OP φ0.6±0.05 0.4 1.65 2.2 4.4 3 0.9±0.05 0.39 PCB mounting hole and land dimensions (Reference) (View from switch top) 0.5 0.36 Surface Mount Detection Switch D3SH 65 Note: 1. Unless otherwise specified, all units are in millimeters and a tolerance of ±0.15 mm applies to all dimensions 2. The operating characteristics are for operation in the A direction (↓ ) and B direction (→ , ← ). Left operating – with Boss D3SH-@1L A (0.9) (2.2) R0.2 0.68 1.1 2.3 B 2-φ0.7 +0.05 0 center of rotation TTP FP OP 0.4 φ0.6±0.05 C0.15 2±0.1 0.4 2.8 0.55 1.65 2±0.05 1.1 0.25 0.8 0.4 2.8±0.07 3.1 1.65 2.2 4.4 3 0.39 0.9±0.05 PCB mounting hole and land dimensions (Reference) (View from switch top) 0.5 0.36 ■ Long Lever Models Model D3SH-@@R1 D3SH-@@L1 24 gf 5.9 ± 0.3 mm 5.4 ± 0.3 mm 3.8 ± 0.2 mm Operating force (OF) max. Free position (FP) Operating position (OP) Total travel position (TTP) Right operating – without Boss D3SH-@0R1 A (0.9) 1.1 0.68 (3.1) R0.2 3 B OP FP center of rotation 3.1 0.8 0.4 0.55 1.1 TTP 0.25 0.4 1.65 1.65 2.2 4.4 0.9±0.05 3 PCB mounting land Dimension (Reference) (View from switch top) 0.39 0.5 0.36 Left operating – without Boss A D3SH-@0L1 (3.1) (0.9) 0.68 R0.2 1.1 3 B FP OP center of rotation TTP 0.25 0.8 0.4 0.55 1.65 1.1 0.4 3.1 1.65 2.2 3 0.9±0.05 0.39 0.5 0.36 66 Surface Mount Detection Switch D3SH 4.4 PCB mounting land Dimension (Reference) (View from switch top) Note: 1. Unless otherwise specified, all units are in millimeters and a tolerance of ±0.15 mm applies to all dimensions 2. The operating characteristics are for operation in the A direction (↓ ) and B direction (→ , ← ). A Right operating – with Boss D3SH-@1R1 1.1 (0.9) (3.1) 3 0.68 R0.2 B 2-φ0.7 +00.05 TTP 0.25 2±0.1 C0.15 3.1 0.8 0.4 2.8±0.07 FP OP center of rotation 0.4 φ0.6±0.05 0.4 0.55 2±0.05 1.1 2.8 1.65 1.65 2.2 4.4 3 0.9±0.05 0.39 PCB mounting hole and land dimensions (Reference) (View from switch top) 0.5 0.36 A Left operating – with Boss D3SH-@1L1 1.1 (3.1) (0.9) 3 R0.2 0.68 B 2-φ0.7 +0.05 0 center of rotation TTP FP OP 0.4 φ0.6±0.05 C0.15 2±0.1 0.8 0.4 2.8 0.55 1.65 2±0.05 1.1 0.25 3.1 2.8±0.07 1.65 0.4 2.2 4.4 3 0.9±0.05 0.39 PCB mounting hole and land dimensions (Reference) (View from switch top) 0.5 0.36 Surface Mount Detection Switch D3SH 67 Precautions Be sure to read the precautions and information common to all Snap Action and Detection Switches, contained in the Technical User’s Guide, “Snap Action Switches, Technical Information” for correct use. ■ Correct Use ■ Caution Mounting Electrical Ratings The cover has the same electrical potential as the COM terminal. Do not short-circuit the cover with a NO or NC terminal when mounting the cover. Confirm the contact load in order to select an appropriate switch rating. Do not apply an excessive electrical load to the contacts, otherwise the contacts may weld, resulting in a short circuit or burning. Terminal Connection Do not use flow soldering or hand soldering to solder terminals. cover Be careful of the following points. Incorrect handling may lead to insufficient actuator return, Switch damage, or reduced durability. • Set the operating body in line with the direction of the actuator movement, and make sure that the operating body is completely separate from the actuator when the Switch is in the free position (FP). When the actuator is operated from the crosswise direction of the Switch, make sure that the corner of the operating body has a minimum radius of R1. Conduct reflow soldering within the range shown in the terminal temperature profile below. Some reflow soldering devices have extremely high peak values. Do a test in advance to confirm proper soldering conditions. Do not conduct reflow soldering more than twice. Also provide a time interval of at least five minutes between the first and second reflow soldering processes to allow the Switch to return to room temperature. Heating the Switch continuously (without an interval) may cause the edges of the Switch to melt and degrade the characteristics. When printing for a screen solder process, a 0.13-mm screen thickness is recommended. Be sure to provide local ventilation. R1 min 255ഒ MAX 220ഒ Operating body 150ഒ • Set the Switch stroke to 70% to 100% of the overtravel (the difference between the operating position and the total travel position). Preheating time: 60 to 120 s • Do not subject the Switch to operations that involve strong impact. • Do not use the Switch as a stopper. • Do not apply excessive loads to the cover or operate the actuator from a direction other than a specified operating direction. • Do not use an adhesive to secure the Switch. A lubricant is used in the Switch. Some of the lubricant may seep out because the Switch does not have an airtight construction. Consider this possibility with respect to the usage conditions when designing or using the Switch. Application Environment Do not use the Switch in locations that are subject to toxic gas, silicon, excessive dust, excessive dirt, high temperatures, high humidity, sudden temperature changes, water splashes, or oil splashes. Otherwise, damage resulting by faulty contact of the Switch contacts, corrosion, or other causes, or other functional faults may occur. Printed Circuit Boards Special attention must be paid to the handling of printed circuit boards after a Switch has been mounted onto them. Airborne PCB particles may penetrate the interior of the Switch when printed circuit boards are separated by cutting. Also, do not stack printed circuit boards that have Switches mounted on them. Product Specification Details This document provides only a partial list of specifications. It is recommended that you request complete drawings and specifications prior to purchasing or using the product. ■ RoHS Directive Compliance Models that are indicated as being RoHS compliant are free of the following six substances. Insulation and Wiring Lead: 1,000 ppm max. Be sure that the installation conditions provide a sufficient insulation distance between Switch terminals and other metal parts, lands, etc. Mercury: 1,000 ppm max. Cadmium: 100 ppm max. Cleaning Hexavalent chromium: 1,000 ppm max. The Switch does not have an airtight construction, and it must not be cleaned with cleaning fluids. Malfunctions may occur if the cleaning fluid penetrates the interior of the Switch together with flux or foreign matter from the surface of the PCB. PBB: 1,000 ppm max. PBDE: 1,000 ppm max. Confirmation with Actual Equipment Be sure to confirm the quality of the product under the load and environmental conditions that will be used during actual applications. 68 Surface Mount Detection Switch D3SH Heating time: 40 s max. MEMO Surface Mount Detection Switch D3SH All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ON-LINE OMRON ELECTRONIC COMPONENTS LLC Global - http://www.omron.com USA - http://www.components.omron.com 55 E. Commerce Drive, Suite B Schaumburg, IL 60173 847-882-2288 Cat. No. X303-E-1 11/10 Specifications subject to change without notice Surface Mount Detection Switch D3SH Printed in USA