MAXIM DG300ACWE

19-0309; Rev 1; 6/99
TTL Compatible CMOS Analog Switches
Applications
Portable Instruments
Features
♦ Monolithic Low-Power CMOS
♦ Latchup Proof Construction
♦ Fully Compatible 2nd Source
♦ Low On-Resistance, <50Ω
♦ Fast Switching Time
♦ V+ to V- Analog Signal Range
♦ Single-Supply Capability
Ordering Information
PART
TEMP RANGE
PIN-PACKAGE
DG300C/D
0°C to +70°C
Dice
DG300CJ
0°C to +70°C
14 Lead Plastic DIP
DG300CWE
0°C to +70°C
16 Lead Wide SO
DG300CK
0°C to +70°C
14 Lead CERDIP
DG300BWE
-25°C to +85°C
16 Lead Wide SO
Low-Power Sample/Holds
DG300BK
-25°C to +85°C
14 Lead CERDIP
Power-Supply Switching
DG300BA
-25°C to +85°C
10 Lead Metal Can
Programmable Gain Ampliffiers
DG300AK
-55°C to +125°C
14 Lead CERDIP
SPDT and DPDT Functions
DG300AA
-55°C to +125°C
10 Lead Metal Can
Process Control and Telemetry
Ordering Information continued at end of data sheet.
Pin Configurations
DUAL SPST DG300/DG300A
V+ (SUBSTRATE AND CASE)
N.C. 1
D1
10
D1 2
1
9 D2
8 S2 N.C. 3
S1 2
S1 4
7 IN2 N.C.
IN1 3
5
4
6
IN1 6
5
N.C.
VGND 7
GND
DUAL DPST DG302/DG302A
14 V+
13 D2
12 N.C.
11 S2
10 N.C.
9 IN2
8 V-
N.C.
S3
D3
D1
S1
IN1
GND
LOGIC SWITCH
0
OFF
1
ON
1
2
3
4
5
6
7
14 V+
13 S4
12 D4
11 D2
10 S2
9 IN2
8 V-
LOGIC SWITCH
0
OFF
1
ON
SPDT DG301/DG301A
V+ (SUBSTRATE AND CASE)
N.C. 1
D1
D2
10
D1 2
1
9
S1 2
8 S2 N.C. 3
S1 4
7 N.C. N.C.
IN 3
5
IN 6
N.C. 4 5 6 VGND
GND 7
LOGIC SWITCH 1 SWITCH 2
ON
OFF
0
OFF
ON
1
DUAL SPDT DG303/DG303A
14 V+
13 D2
12 N.C.
11 S2
10 N.C.
9 N.C.
8 V-
N.C.
S3
D3
D1
S1
IN1
GND
1
2
3
4
5
6
7
14 V+
13 S4
12 D4
11 D2
10 S2
9 IN2
8 V-
LOGIC SWITCHES 1, 3 SWITCHES 2, 4
0
OFF
ON
1
ON
OFF
SWITCH STATES ARE FOR LOGIC "1" INPUTS (POSITIVE LOGIC).
________________________________________________________________ Maxim Integrated Products
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
1
DG300(A)/DG301(A)/DG302(A)/DG303(A)
General Description
Maxim’s DG300–DG303 and DG300A–DG303A CMOS
dual and quad analog switches combine low power
operation with fast switching times and superior DC and
AC switch characteristics. On-resistance is less than
50Ω and is essentially constant over the analog signal
range. Device specifications are ideal for batterypowered circuitry.
These switches are available in a variety of formats as
outlined in the Pin Configurations section. The switch
control logic inputs are fully TTL and CMOS compatible. Also featured are “break-before-make” switching
and low charge injection.
Maxim’s DG300-DG303 and DG300A-DG303A families
are electrically compatible and pin compatible with the
original manufacturer’s devices. All devices operate with
power supplies ranging from ±5V to ±18V. Single-supply operation is implemented by connecting V- to GND.
ABSOLUTE MAXIMUM RATINGS
Voltages Referenced to VV+ (DG300–DG303)...............................................................36V
V+ (DG300A–DG303A) ..........................................................44V
GND .......................................................................................25V
Digital Inputs, VS, VD, (Note 1).......................-4V to (V+ + 4V) or
30mA, whichever occurs first
Current, Any Terminal Except S or D ..................................30mA
Continuous Current, S or D .................................................30mA
(pulsed at 1ms, 10% duty cycle max) ..........................100mA
Storage Temperature (A & B suffix)...................-65°C to +150°C
(C suffix) .........................-65°C to +125°C
Operating Temperature (A suffix) ......................-55°C to +125°C
(B suffix) ........................-25°C to +85°C
(C suffix) ...........................0°C to +70°C
Lead Temperature (soldering 10s) ..................................+300°C
Power Dissipation*
Cerdip (K) (derate 11mW/°C above +75°C) ....................825mW
Plastic DIP (J) (derate 6.5mW/°C above +25°C) .............470mW
Metal Can (A) (derate 6mW/°C above +75°C).................450mW
*Device mounted with all leads soldered or welded to PC board.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(V+ = +15V, V- = -15V, GND = 0V, TA = +25°C, unless otherwise noted.)
PARAMETER
SYMBOL
TEST CONDITIONS
DG300–DG303A
DG300A–DG303AA
TYP
MAX
MIN
INPUT
SWITCH
(Note 2) (Note 3)
DYNAMIC
DG300(A)/DG301(A)/DG302(A)/DG303(A)
TTL Compatible CMOS Analog Switches
Analog Signal Range
Drain-Source
ON-Resistance
Source OFFLeakage Current
Drain OFFLeakage Current
Drain ONLeakage Current
Input Current/
Voltage High
Input Current/
Voltage Low
Turn-ON Time
Turn-OFF Time
Break-Before-Make
Interval
Charge Injection
Source OFFCapacitance
Drain OFFCapacitance
Channel ONCapacitance
Input Capacitance
Off-Isolation (Note 4)
Crosstalk
(Channel-to-Channel)
2
VANALOG IS = 10mA, VIN = 0.8V or 4.0V
IS = -10mA, VD = 10V
RDS(ON)
IS = -10mA, VD = -10V
VS = 14V, VD = -14V
IS(OFF)
VIN = 0.8V
VS = -14V, VD = 14V
or
VS = -14V, VD = 14V
VIN = 0.8V
ID(OFF)
VS = 14V, VD = -14V
VD = VS = 14V
ID(ON)
VD = VS = -14V
VIN = 5.0V
IINH
VIN = 15V
IINL
VIN = 0V
tON
tOFF
See Switching Time Test Circuit
tON - tOFF
Q
CS(OFF)
CD(OFF)
CD(ON) +
CS(ON)
CIN
-1
-1
-2
-1
-1
See Break-Before-Make Time Test
Circuit, DG301(A)/DG303(A) only
CL = 10nF, RGEN = 0Ω, VGEN = 0V
VS = 0V
f = 1MHz,
VIN = 0.8V
VD = 0V
or
VIN = 4.0V
VS = VD = 0V
f = 1MHz
-15
VIN = 0V
VIN = 15V
VIN = 0V, RL = 1kΩ
VS = 1VRMS, f = 500kHz
30
30
0.1
-0.1
0.1
-0.1
0.1
-0.1
-0.001
0.001
(Note 2) (Note 3)
+15
50
50
1
-15
-5
1
-5
2
-5
-1
1
-0.001
150
130
DG300–DG303B/C
DG300A–DG303AB/C
UNITS
MIN
TYP
MAX
-1
300
250
30
30
0.1
-0.1
0.1
-0.1
0.1
-0.1
-0.001
0.001
+15
50
50
5
5
5
1
-0.001
150
130
V
Ω
nA
nA
nA
µA
µA
300
250
ns
ns
50
50
ns
12
12
pC
14
14
pF
14
14
pF
40
40
pF
6
7
62
6
7
62
dB
74
74
dB
_______________________________________________________________________________________
pF
TTL Compatible CMOS Analog Switches
(V+ = +15V, V- = -15V, GND = 0V, TA = +25°C, unless otherwise noted.)
PARAMETER
SYMBOL
TEST CONDITIONS
DG300–DG303A
DG300A–DG303AA
TYP
MAX
MIN
SUPPLY
(Note 2) (Note 3)
Positive Supply
Current
Negative Supply
Current
Positive Supply
Current
Negative Supply
Current
I+
I-
VIN = 4V (one input)
(all others = 0)
0.23
-10
I+
(Note 2) (Note 3)
0.5
-0.001
0.001
DG300–DG303B/C
DG300A–DG303AB/C
UNITS
MIN
TYP
MAX
0.23
-10
10
0.5
-0.001
0.001
mA
µA
10
µA
VIN = 0.8V (all inputs)
I-
-10
-0.001
-10
-0.001
µA
ELECTRICAL CHARACTERISTICS (Over Temperature)
(V+ = +15V, V- = -15V, GND = 0V, TA = Over Temperature Range, unless otherwise noted.)
PARAMETER
SYMBOL
TEST CONDITIONS
DG300–DG303A
DG300A–DG303AA
TYP
MAX
MIN
DYNAMIC
SUPPLY
INPUT
SWITCH
(Note 2) (Note 3)
Analog Signal Range
Drain-Source
ON-Resistance
Source OFFLeakage Current
Drain OFFLeakage Current
Drain ONLeakage Current
Input Current/
Voltage High
Input Current/
Voltage Low
Positive Supply
Current
Negative Supply
Current
Positive Supply
Current
Negative Supply
Current
VANALOG IS = -10mA, VIN = 0.8V or 4.0V
IS = -10mA, VD = 10V
RDS(ON)
IS = -10mA, VD = -10V
VS = 14V, VD = -14V
IS(OFF)
VIN = 0.8V
VS = -14V, VD = 14V
or
VS = -14V, VD = 14V
VIN = 0.8V
ID(OFF)
VS = 14V, VD = -14V
VD = VS = 14V
ID(ON)
VD = VS = -14V
VIN = 5.0V
IINH
VIN = 15V
IINL
I+
I-
VIN = 0V
VIN = 4V (one input)
(all others = 0)
-15
DG300–DG303B/C
DG300A–DG303AB/C
UNITS
MIN
TYP
MAX
(Note 2) (Note 3)
+15
75
75
100
-100
-15
-100
100
-100
100
-100
200
-200
-1
200
-200
-10
1
-1
10
-10
1
-100
I+
+15
75
75
100
Ω
nA
nA
nA
µA
µA
1
-200
100
V
mA
mA
200
µA
VIN = 0.8V (all inputs)
-100
I-
Turn-ON Time
tON
Turn-OFF Time
tOFF
-200
µA
500
ns
450
ns
See Switching Time Test Circuit
_______________________________________________________________________________________
3
DG300(A)/DG301(A)/DG302(A)/DG303(A)
ELECTRICAL CHARACTERISTICS (continued)
DG300(A)/DG301(A)/DG302(A)/DG303(A)
TTL Compatible CMOS Analog Switches
ELECTRICAL CHARACTERISTICS (Over Temperature) (continued)
(V+ = +15V, V- = -15V, GND = 0V, TA = Over Temperature Range, unless otherwise noted.)
Note 1: Signals on SX, DX, or INX exceeding V+ or V- are clamped by internal diodes. Limit diode forward current to maximum current ratings.
Note 2: The algebraic convention whereby the most negative value is a minimum, and the most positive value is a maximum is used
in this data sheet.
Note 3: Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing.
Note 4: OFF-isolation = 20 log VS , VS = input to OFF switch, VD = output.
VD
Typical Operating Characteristics
(TA = +25°C, unless otherwise noted.)
4
_______________________________________________________________________________________
TTL Compatible CMOS Analog Switches
∆VO
RGEN
DX
SX
VO
VO
CL
10nF
VGEN
INX
+4V
INX
ON
ON
OFF
0V
∆VO = ∆ MEASURED VOLTAGE ERROR DUE TO CHARGE INJECTION
THE ERROR VOLTAGE IN COULOMBS IS ∆Q = CL x ∆VO.
Figure 1. Charge Injection Test Circuit
LOGIC "1" = SWITCH ON
VIHN
LOGIC
INPUT
+15V
+4V
50%
D1
S2
D2
IN
RL2
300Ω
VO2
VS2 = 3V
50%
0V
S1
VS1 = 3V
VS1
SWITCH
OUTPUT
SWITCH
OUTPUT
VO1
V+
0V
VO1
GND
LOGIC
INPUT
VS2
RL1
300Ω
CL2
33pF
CL1
33pF
V-15V
VO2
SWITCH
OUTPUT
50%
0V
tBBM
Figure 2. Break-Before-Make Time Test Circuit SPDT (DG301(A), DG303(A)
LOGIC "1" = SWITCH ON
LOGIC
INPUT
tR < 20ns
tF < 20ns
+15V
VIHN
V+
50%
+4V
0V
S
0
IN
RL
300Ω
SWITCH
OUTPUT
VO
VS = 3V
VS
SWITCH
OUTPUT
90%
10%
0V
tON
LOGIC
INPUT
GND
CL
33pF
V-15V
tOFF
Figure 3. Switching Time Test Circuit
_______________________________________________________________________________________
5
DG300(A)/DG301(A)/DG302(A)/DG303(A)
Test Circuits
DG300(A)/DG301(A)/DG302(A)/DG303(A)
TTL Compatible CMOS Analog Switches
Table 1. Typical Single Supply Parameters
V+ SUPPLY VOLTAGE (V- = 0V)
PARAMETER
+15V
+20V
+30V
tON
190ns
150ns
110ns
70ns
tOFF
40ns
40ns
40ns
40ns
VSIGNAL = +1V
71Ω
51Ω
42Ω
31Ω
Switching Time (RL = 1kΩ)
On-Resistance
+10V
VSIGNAL = V+ / 2
77Ω
54Ω
43Ω
30Ω
VSIGNAL = V+
84Ω
63Ω
54Ω
43Ω
0.8V, 4.0V
0.8V, 4.0V
0.8V, 4.0V
0.8V, 4.5V
Input Logic Levels
Applications Information
Table 2. Charge Injection (±15V Supplies)
All DG300 family switches will operate with ±5V to ±15V
power supplies. They can also be used with single-ended
power supplies ranging from +10V to +30V where the Vterminal is connected to ground. In either case, analog
signals ranging from V+ to V- can be switched.
ANALOG INPUT (V)
The on-resistance variation with analog signal and supply
voltage is shown in the Typical Operating Characteristics.
The temperature coefficient of RON is typically 0.5%/°C.
Typical on-resistance matching from channel to channel is 10%. In addition, Table 1 outlines some typical
parameters for single-supply operation.
-10
5
INJECTED Q (pC)
+10
4
+5
8
0
12
-5
8
The charge injection test circuit is shown in Figure 1.
Table 2 lists the typical injected charge for DG300 series
switches with various input voltages.
Chip Topography
b
a
n
m
DIE PAD
l
c
0.106"
2.69mm
k
d
j
e
f
g
h
i
a
b
c
d
e
f
g
h
i
j
k
l
m
n
DG300
DG300A
N.C.
D1
D1
S1
IN1
V+
GND
VIN2
S2
D2
D2
N.C.
V+
DG301
DG301A
N.C.
D1
S1
IN1
IN1
V+
GND
VGND
VS2
D2
N.C.
V+
0.108"
2.74mm
6
_______________________________________________________________________________________
DG302/DG303
DG302A/DG303A
S3
D3
D1
S1
IN1
V+
GND
VIN2
S2
D2
D4
S4
V+
TTL Compatible CMOS Analog Switches
PART
TEMP RANGE
PIN-PACKAGE
PART
TEMP RANGE
PIN-PACKAGE
DG300AC/D
0°C to +70°C
Dice
DG302CWE
0°C to +70°C
16 Lead Wide SO
DG300ACJ
0°C to +70°C
14 Lead Plastic DIP
DG302CK
0°C to +70°C
14 Lead CERDIP
DG300ACWE
0°C to +70°C
16 Lead Wide SO
DG302BWE
-25°C to +85°C
16 Lead Wide SO
0°C to +70°C
14 Lead CERDIP
DG302BK
-25°C to +85°C
14 Lead CERDIP
DG300ABWE
-25°C to +85°C
16 Lead Wide SO
DG302AK
-55°C to +125°C
14 Lead CERDIP
DG300ABK
-25°C to +85°C
14 Lead CERDIP
DG302AC/D
0°C to +70°C
Dice
DG300ABA
-25°C to +85°C
10 Lead Metal Can
DG302ACJ
0°C to +70°C
14 Lead Plastic DIP
DG301C/D
0°C to +70°C
Dice
DG302ACWE
0°C to +70°C
16 Lead Wide SO
DG301CJ
0°C to +70°C
14 Lead Plastic DIP
DG302ACK
0°C to +70°C
14 Lead CERDIP
DG301CWE
0°C to +70°C
16 Lead Wide SO
DG302ABWE
-25°C to +85°C
16 Lead Wide SO
DG301CK
0°C to +70°C
14 Lead CERDIP
DG302ABK
-25°C to +85°C
14 Lead CERDIP
16 Lead Wide SO
DG303C/D
0°C to +70°C
Dice
14 Lead CERDIP
DG303CJ
0°C to +70°C
14 Lead Plastic DIP
DG300ACK
DG301BWE
-25°C to +85°C
DG301BK
-25°C to +85°C
DG301BA
-25°C to +85°C
10 Lead Metal Can
DG303CWE
0°C to +70°C
16 Lead Wide SO
DG301AK
-55°C to +125°C
14 Lead CERDIP
DG303CK
0°C to +70°C
14 Lead CERDIP
10 Lead Metal Can
DG303BWE
-25°C to +85°C
16 Lead Wide SO
DG301AA
-55°C to +125°C
DG301AC/D
0°C to +70°C
Dice
DG303BK
-25°C to +85°C
14 Lead CERDIP
DG301ACJ
0°C to +70°C
14 Lead Plastic DIP
DG303AK
-55°C to +125°C
14 Lead CERDIP
0°C to +70°C
16 Lead Wide SO
DG303AC/D
0°C to +70°C
Dice
0°C to +70°C
DG301ACWE
14 Lead CERDIP
DG303ACJ
0°C to +70°C
14 Lead Plastic DIP
DG301ABWE
-25°C to +85°C
16 Lead Wide SO
DG303ACWE
0°C to +70°C
16 Lead Wide SO
DG301ABK
-25°C to +85°C
14 Lead CERDIP
DG303ACK
0°C to +70°C
14 Lead CERDIP
DG301ABA
-25°C to +85°C
10 Lead Metal Can
DG303ABWE
-25°C to +85°C
16 Lead Wide SO
DG302C/D
0°C to +70°C
Dice
DG303ABK
-25°C to +85°C
14 Lead CERDIP
DG302CJ
0°C to +70°C
14 Lead Plastic DIP
DG301ACK
_______________________________________________________________________________________
7
DG300(A)/DG301(A)/DG302(A)/DG303(A)
Ordering Information (continued)
Package Information
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,
go to www.maxim-ic.com/packages.)
PDIPN.EPS
DG300(A)/DG301(A)/DG302(A)/DG303(A)
TTL Compatible CMOS Analog Switches
8
_______________________________________________________________________________________
TTL Compatible CMOS Analog Switches
E
DIM
A
A1
B
C
e
E
H
L
H
MAX
MIN
0.093
0.104
0.004
0.012
0.014
0.019
0.009
0.013
0.050
0.291
0.299
0.394
0.419
0.050
0.016
SOICW.EPS
INCHES
N
MILLIMETERS
MIN
2.35
0.10
0.35
0.23
MAX
2.65
0.30
0.49
0.32
1.27
7.40
7.60
10.00
10.65
0.40
1.27
VARIATIONS:
1
INCHES
TOP VIEW
DIM
D
D
D
D
D
D
A
B
e
FRONT VIEW
MIN
0.398
0.447
0.496
0.598
0.697
MAX
0.413
0.463
0.512
0.614
0.713
MILLIMETERS
MIN
10.10
11.35
12.60
15.20
17.70
MAX
10.50
11.75
13.00
15.60
18.10
N MS013
16
AA
18
AB
20 AC
24 AD
28 AE
C
0 -8
A1
L
SIDE VIEW
PROPRIETARY INFORMATION
TITLE:
PACKAGE OUTLINE, .300" SOIC
APPROVAL
DOCUMENT CONTROL NO.
21-0042
REV.
B
1
1
_______________________________________________________________________________________
9
DG300(A)/DG301(A)/DG302(A)/DG303(A)
Package Information (continued)
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,
go to www.maxim-ic.com/packages.)
Package Information (continued)
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,
go to www.maxim-ic.com/packages.)
CDIPS.EPS
DG300(A)/DG301(A)/DG302(A)/DG303(A)
TTL Compatible CMOS Analog Switches
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
10 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 1999 Maxim Integrated Products
Printed USA
is a registered trademark of Maxim Integrated Products.