Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 3205196751 Item: DIP05-1C96-51F Conditions Coil Data at 20 °C Coil resistance Coil voltage Rated power Coil current Thermal resistance Inductance Pull-In voltage Drop-Out voltage = Contact rating Switching voltage Switching current Carry current Contact resistance static Insulation resistance Breakdown voltage Operate time, incl. bounce Release time Capacity Special Product Data Number of contacts Contact - form Dielectric Strength Coil/Contact Insulation resistance Coil/Contact Capacity Coil/Contact Case colour Housing material Connection pins Magnetic Shield Reach / RoHS conformity Approval Approval Remark Typ Max Unit Min Typ Max Unit operating temperature + self heating Conditions Contact data 90 Min ! "# $%! %#! #& ' not to exceed their individual max.'s DC or Peak AC/ with 40% overdrive DC or Peak AC/with 40% overdrive DC or Peak AC/ with 40% overdrive ( ) * +% Start Value , - #. * %. RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch / 0 1 Conditions Min Typ ) ) 2 Max Unit 1 Form C - Changeover according to IEC 255-5 40°C, 95% R.H. @ 10 kHz 0 / 2 black mineral filled epoxy FeNi-alloy tinned no yes UL File No. NRNT2.E156887 UL File No. NRNT8.E156887 electrostatic screen pin 9, diode pin 2/6 Modifications in the sense of technical progress are reserved Designed at: 26.04.04 Designed by: SCHELLHORN Approval at: 26.08.09 Approval by: KOLBRICH Last Change at: 02.09.09 Last Change by: KSCHIELENSKI Approval at: 02.09.09 Approval by: KOLBRICH Version: 02 Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 3205196751 Item: DIP05-1C96-51F Environmental data Shock Vibration Operating temperature Storage temperature Soldering temperature Washability Conditions Min Max 5 5 wave soldering max. 5 sec. 1 Unit 3 3 4 4 4 fully sealed Conditions General data Typ 1/2 sine wave duration 11ms from 10 - 2000 Hz Min Total weigth Packaging Typ Max Tube per 25 piece Unit 3 Modifications in the sense of technical progress are reserved Designed at: 26.04.04 Designed by: SCHELLHORN Approval at: 26.08.09 Approval by: KOLBRICH Last Change at: 02.09.09 Last Change by: KSCHIELENSKI Approval at: 02.09.09 Approval by: KOLBRICH Version: 02