DMF05LCFLP FIVE ELEMENT COMMON ANODE ESD-PROTECTION DIODE ARRAY Features Mechanical Data • • • • • • NEW PRODUCT • • • 5-line ESD Protection Sub-miniature Package (1.6 x 1.6mm) Low Capacitance – 42pF typ @ VR = 0V Provides a High Level of Protection from ESD to IEC61000-4-2 • ±30kV Contact Discharge • ±30kV Air Discharge Lead Free/RoHS Compliant (Note 1) "Green" Device (Note 2) Qualified to AEC-Q101 Standards for High Reliability Case: DFN1616-6 Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Solderable per MIL-STD-202, Method 208 Lead Free Plating (NiPdAu Finish over Copper leadframe). Polarity: Pin 1 Dot and Center Pad Notch, See Diagram Marking Information: See Page 2 Ordering Information: See Page 2 Weight: 0.004 grams (approximate) • • • • • • • DFN1616-6 5 4 1 2 3 TOP VIEW Internal Schematic BOTTOM VIEW Maximum Ratings 6 @TA = 25°C unless otherwise specified Characteristic Peak Pulse Current, 8/20μs waveform, single shot, per IEC61000-4-5 Peak Pulse Power, 8/20μs waveform, single shot, per IEC61000-4-5 Human Body Model Machine Model ESD Rating IEC61000-4-2 Air Discharge IEC61000-4-2 Contact Discharge Symbol IPPM PPP ESD Value 5 70 8 400 30 30 Unit A W kV V kV kV Value 256 -55 to +150 Unit °C/W °C Thermal Characteristics Characteristic Thermal Resistance Junction to Ambient Air (Note 3) Operating and Storage Temperature Range Electrical Characteristics Symbol RθJA TJ, TSTG @TA = 25°C unless otherwise specified Max. Forward Max. Forward Reverse Max. Clamping Max. Reverse Max. Clamping Max Total Typical Total Clamping Clamping Breakdown Standoff Leakage @ Capacitance Capacitance Voltage Voltage Vc Test Voltage Voltage Voltage VF Voltage VF Current VR = 2.5V VR = 0V @ IPP = 1A VRWM @ IPP = 5A VRWM @ VBR @ IT @ IF = 1A @ IF = 5A per IEC61000-4-5 per IEC61000-4-5 f = 1MHz f = 1MHz (Note 4) IRWM = 1μA per IEC61000-4-5 per IEC61000-4-5 Min (V) Min (V) Max (V) IT (mA) IR (μA) VC (V) VC (V) VF (V) VF (V) CT (pF) CT (pF) 5.0 Notes: 6 8 1.0 0.1 9.5 12.5 2 4 50 25 1. No Purposefully added Lead. 2. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php. 3. Part mounted on FR-4 PC board with recommended pad layout, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. Only one switching diode powered on. 4. Short duration pulse test used to minimize self-heating effect. DMF05LCFLP Document number: DS32004 Rev. 3 - 2 1 of 4 www.diodes.com July 2010 © Diodes Incorporated IF, INSTANTANEOUS FORWARD CURRENT (mA) NEW PRODUCT IPP, PEAK PULSE CURRENT (%Ipp) DMF05LCFLP 100 50 0 20 0 60 40 10 1 0.1 0.01 0.001 0.5 0.6 0.7 0.8 0.9 1.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 100 10 90 8 CT, TOTAL CAPACITANCE (pF) VR, INSTANTANEOUS REVERSE VOLTAGE (V) t, TIME (μs) Fig. 1 Pulse Waveform 100 6 4 2 80 70 60 50 40 30 20 0 0.5 1.5 2.5 3.5 4.5 5.5 6.5 IR, INSTANTANEOUS REVERSE CURRENT (nA) Fig. 3 Typical Reverse Characteristics 10 0 1 2 3 4 5 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Capacitance vs. Reverse Voltage Ordering Information (Note 5) Part Number DMF05LCFLP-7 Notes: Case DFN1616-6 Packaging 3000/Tape & Reel 5. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information A10 = Product Type Marking Code YM = Date Code Marking Y = Year (ex: X = 2010) M = Month (ex: 9 = September) A10 YM Date Code Key Year Code Month Code 2010 X Jan 1 2011 Y Feb 2 DMF05LCFLP Document number: DS32004 Rev. 3 - 2 Mar 3 2012 Z Apr 4 May 5 2013 A Jun 6 2 of 4 www.diodes.com Jul 7 2014 B Aug 8 Sep 9 2015 C Oct O Nov N Dec D July 2010 © Diodes Incorporated DMF05LCFLP Package Outline Dimensions A A3 DFN1616-6 Dim Min Max Typ A 0.545 0.605 0.575 A1 0 0.05 0.02 A3 0.13 ⎯ ⎯ b 0.20 0.30 0.25 D 1.55 1.675 1.60 D2 1.10 1.30 1.20 E 1.55 1.675 1.60 e 0.50 ⎯ ⎯ E2 0.30 0.50 0.40 L 0.275 0.375 0.325 All Dimensions in mm A1 D NEW PRODUCT e E E2 L b D2 Suggested Pad Layout Y C X2 G X1 Dimensions Z G X1 X2 Y C Value (in mm) 1.3 0.175 0.50 0.525 0.30 0.50 Z DMF05LCFLP Document number: DS32004 Rev. 3 - 2 3 of 4 www.diodes.com July 2010 © Diodes Incorporated DMF05LCFLP IMPORTANT NOTICE NEW PRODUCT DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2010, Diodes Incorporated www.diodes.com DMF05LCFLP Document number: DS32004 Rev. 3 - 2 4 of 4 www.diodes.com July 2010 © Diodes Incorporated