Document 196-1 SMT Power Inductors - DO3316H Series • Soldered self-leaded construction for excellent solderability. • Very low DCR values and excellent current handling Designer’s Kit C326 contains 3 of each part Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant tin-silver-copper over copper. Other terminations available at additional cost. Weight 0.95 – 1.25 g Ambient temperature –40°C to +85°C with Irms current, +85°C to +125°C with derated current Storage temperature Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 750 per 13″ reel Plastic tape: 24 mm wide, 0.35 mm thick, 12 mm pocket spacing, 6.4 mm pocket depth PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf. SRF4 DCR Isat5 Irms6 L2 % maxtyp Part number1(µH) tol3 (Ohms)(MHz) (A) (A) DO3316H-121ML_0.1220 0.001520028 17 DO3316H-331ML_0.3320 0.002 20020 16 DO3316H-681ML_0.6820 0.005 20013 12 DO3316H-102ML_1.0 20 0.006 10011 10 DO3316H-152ML_1.5 20 0.008 90 9.09.0 DO3316H-222_L_2.2 20,100.011 80 7.8 7.4 DO3316H-272_L_2.7 20,100.012 65 7.0 6.6 DO3316H-332_L_3.3 20,100.014 60 6.4 5.9 DO3316H-392_L_3.9 20,100.015 50 5.9 5.3 DO3316H-472_L_4.7 20,100.018 45 5.4 4.8 1. When ordering, specify tolerance, termination and packaging codes: DO3316H-472MLD Tolerance:M =20%, K = 10% (Table shows stock tolerances in bold.) Termination:L=RoHS compliant tin-silver over copper. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging:D =13″ machine-ready reel. EIA-481 embossed plastic tape (750 parts per full reel). B=Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR meter or equivalent. 3. Tolerances in bold are stocked for immediate shipment. 4. SRF measured using Agilent/HP 8753D network analyzer. 5. DC current at which the inductance drops 10% (typ) from its value without current. 6. Current that causes a 40°C temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 196-1 Revised 09/25/12 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 196-2 SMT Power Inductors - DO3316H Series Typical L vs Frequency Typical L vs Current 100 Inductance (µH) Inductance (µH) 100 10 3.3 µH 1.5 µH 1 10 3.3 µH 1.5 µH 1 0.33 µH 0.33 µH 0.1 0.1 0.01 1 0.1 10 0.01 Frequency (MHz) 1 0.1 10 Current (A) Irms Derating 0.390 max 9,91 120 110 0.330 8,38 90 80 0.250 max 6,35 70 60 0.460 max 11,68 0.360 min 9.14 50 40 25°C Percent of rated Irms 100 30 20 Recommended Land Pattern 0.060 1,52 0.160 4,06 0.150 typ 3,81 10 0 -40 -20 0 20 40 60 80 Ambient temperature (°C) 100 120 140 0.400 10,16 0.120 3,05 0.520 max 13,21 Internal code Dash number XXX X inches since Feb. 2005. Parts manufactured Part marking Dimensions are in prior to that date may have color dots. mm Visit www.coilcraft.com/colrpowr.cfm for color dot marking details. US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 196-2 Revised 09/25/12 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.