DS80C400 (DSTINIm400) Networked Microcontroller Evaluation Kit www.maxim-ic.com GENERAL DESCRIPTION FEATURES The DSTINIm400 is a fully assembled and tested circuit board that evaluates the DS80C400 network microcontroller. In addition to the DS80C400, the DSTINIm400 includes a real-time clock, 1MB flash, 1MB static RAM, and support for an external Ethernet PHY for connecting to a wide variety of networks. The circuit board is designed as a module to be plugged into a 144-pin SODIMM connector. For evaluation, the DSTINIm400 can be inserted into the DSTINIs400 socket board. The combination of the two boards allows full evaluation of the features of the DS80C400 using an Ethernet network. § Hosts the TINI Runtime Environment in Validated Hardware Design (in Conjunction with the DSTINIs400) § Industry Standard MII Interface to Connects to Network Interfaces Including 10/100 Base-T, Optical, and HomePNA § § § § § § § § Three Hardware Serial Ports Detailed information about the initial setup process and use of the TINI platform is contained in Application Note 612: Getting Started with the TINIm400 (DS80C400) Verification Module. ORDERING INFORMATION PART TEMP RANGE DSTINIm400 0°C to +70°C ® ® Integrated 1-Wire Network Master CAN2.0B Port Real-Time Clock for Time Stamping 1MB Flash ROM for Application Storage 1MB NV SRAM for Data Storage 3.3V Single-Supply Operation Fully Assembled and Tested Design DIMENSIONS Approx. 67mm x 48mm, 144 SODIMM Note: To evaluate the DS80C400, order both a DSTINIm400 and a DSTINIs400. COMPONENT LIST DESIGNATION QTY DESCRIPTION C1–C5, C8–C14, C17, C18 14 0.1mF, ±20%, 10V ceramic capacitors (0805) C6, C7 2 27pF, ±20%, 50V C0G ceramic capacitors (0805) C15 1 1.0mF, ±20%, 10V ceramic capacitor (1206) C16 1 4.7mF, ±20%, 10V ceramic capacitor (1206) C19, C20 2 47mF, ±20%, tantalum capacitors (C) BT1 1 CR1632 3V lithium cell DESIGNATION QTY DESCRIPTION DN1 1 BAT54S diode (SOT23) DS1 1 SML-LX23SRC Lumex LED Q1, Q3 2 Q2 1 R1, R4, R7, R8 4 10kW, ±5% resistors (0805) R2 1 1.5kW, ±5% resistor (0805) R3 1 1kW, ±5% resistor (0805) R5 1 2.2kW, ±5% resistor (0805) BSS84 P-Channel FET (SOT23) 2N7002 N-Channel FET (SOT23) TINI and 1-Wire are registered trademarks of Dallas Semiconductor. 1 of 5 REV: 013004 DS80C400 (DSTINIm400) Networked Microcontroller EV KIT COMPONENT LIST (continued) DESIGNATION QTY R6 1 U1 1 U2, U3 2 U4 1 U5, U6 2 DESCRIPTION DESIGNATION QTY U7 1 MAX1792EUA18 voltage regulator U8 1 DS1672U-33 real-time clock U9 1 DS2502-E48 IEEE MAC address AM29LV081B-70EC 1MB flash Y1 1 14.7456MHz crystal MAX6365PKA31 reset controllers Y2 1 32kHz crystal 10W, ±5% resistor (0805) DS80C400 networked microcontroller HM62W8512BLTT-7UL 512kB RAM DESCRIPTION QUICK START It is highly recommended that the developer use the DSTINIs400 sockets board in conjunction with the DSTINIm400. The DSTINIs400 was specifically designed to hold the DSTINIm400 and provide the physical 2 interconnects (Ethernet PHY), as well as the 1-Wire, I C™, SPI™, CAN, and four serial port connectors. If the developer wishes to implement his or her own design using the DSTINIm400, a 144-pin SODIMM connector such as the Hirose SX6E-144S-0.8SH is required. The TINIm400 must be seated correctly into the DSTINIs400 to ensure a proper connection. Insert the TINIm400 into the connector at a 30-degree angle. Place index fingers behind the SODIMM connector and place thumbs on the top edge of the TINIm400, pressing firmly until it clicks into place or seats with only a millimeter of gold contact exposed. Press the TINIm400 down parallel to the TINIs400 until the side arms latch into the center of the semicircular cutouts on the TINIm400. Note that the flash used on the DSTINIm400 limits applications to a maximum of 2x clock multiplier mode with the included 14.7456MHz crystal. Use of the 4x clock multiplier mode results in unstable operations. FOR MORE INFORMATION TINI platform details can be found at www.maxim-ic.com/TINI. The TINI Specification and Developer’s Guide (Addison-Welsey, 2001) is an invaluable resource when developing with the TINI platform. Download a free copy from our website at www.maxim-ic.com/TINIguide. DS80C400 INFORMATION For more information about the DS80C400 network microcontroller, please consult the DS80C400 data sheet available on our website at www.maxim-ic.com/microcontrollers. ADDITIONAL RESOURCES For detailed information about the initial setup and use of the TINI platform, refer to Application Note 612: Getting Started with the TINIm400 (DS80C400) Verification Module at www.maxim-ic.com/appnoteindex. DS80C400 Networked Microcontroller Data Sheet: www.maxim-ic.com/DS80C400 Microcontroller Website: www.maxim-ic.com/microcontrollers I2C is a trademark of Philips Corp. Purchase of I2C components of Maxim Integrated Products, Inc., or one of its sublicensed Associated Companies, conveys a license under the Philips I2C Patent Rights to use these components in an I2C system, provided that the system conforms to the I2C Standard Specification as defined by Philips. SPI is a trademark of Motorola Inc. 2 of 5 P1[7:0] nRstOut " & $ D[7:0] P17 P16 P15 P14 P13 P12 P11 P10 Reset A[21:0] " Int1W 86 85 84 83 82 81 80 79 78 77 76 100 99 98 97 96 95 94 93 92 91 90 89 nStiffPU Col RxClk RxDV 14 15 16 17 18 19 20 21 22 23 24 25 RXD.0 RXD.1 RXD.2 RXD.3 MDC MDIO P3.0/RXD0 P3.1/TXD0 P3.2/INT0* P3.3/INT1* P3.4/T0 P3.5/T1/CLKO R2 MDC MDIO P30 P31 P32 P33 P3[3:0] SDa 26 27 ! 28 ! 29 ! 30 !" 3 1 32 33 34 35 SClk P53 P52 P51 P50 nWr nRd nPCE[0..3] # % $ & VCC3 61 60 59 58 57 56 55 54 53 52 51 DS80C400 P3.6/WR* P3.7/RD* P5.7/PCE3* P5.6/PCE2* P5.5/PCE1* P5.4/PCE0* P5.3 P5.2/T3 P5.1/C0RX P5.0/C0TX RxD0 RxD1 RxD2 RxD3 P2.3/A11 P2.4/A12 P2.5/A13 P2.6/A14 P2.7/A15 P6.0/CE4* P6.1/CE5* P6.2/CE6* P6.3/CE7* P6.4/A20 P6.5/A21 U1 RxD[3:0] 1.5K P7.3/A3 P7.4/A4 P7.5/A5 P7.6/A6 P7.7/A7 VCC1 EA* ALE PSEN* P2.0/A8 P2.1/A9 P2.2/A10 0.1uF C1 & $ R1 10K nEA ALE n P S En % # " VCC3 C2 ! ! !& !$ " C3 0.1uF C4 0.1uF C5 0.1uF 0.1uF ! ! ! !" P67 P66 RxEr VCC3 75 74 73 72 71 70 69 68 67 66 65 64 MUX* P4.7/A19 P4.6/A18 P4.5/A17 P4.4/A16 P4.3/CE3* P4.2/CE2* P4.1/CE1* P4.0/CE0* P6.7/TXD2 P6.6/RXD2 TxClk VCC1 40 41 42 43 44 45 46 47 48 49 50 TxEn CRS COL TXD.3 TXD.2 TXD.1 TXD.0 TX_EN TXCLK RX_ER RXCLK RX_DV XTAL2 XTAL1 TxD3 TxD2 TxD1 TxD0 37 38 TxD[3:0] 1 2 3 4 5 6 7 8 9 10 11 P0.0/D0 P0.1/D1 P0.2/D2 P0.3/D3 P0.4/D4 P0.5/D5 P0.6/D6 P0.7/D7 P7.0/A0 P7.1/A1 P7.2/A2 OWSTP* OW RSTOL RST P1.7/INT5* P1.6/INT4 P1.5/INT3* P1.4/INT2 P1.3/TXD1 P1.2/RXD1 P1.1/T2EX P1.0/T2 CRS P6[7:6] nCE[7:0] 1K VCC3 DS1 VCC3 R3 LED Y1 P5[3:0] 14.74 5 6 M H z C6 27pF C7 Copyright (c) 2003 Dallas Semiconductor / Maxim 27pF TINI-400 Processor A TINI-400 Tuesday, February 12, 2002 1 3 D[7:0] VCC3 A[20:0] B S S 84 Reset R8 10K H M 6 28512 & $ & $ % # U2 " MVCC2 C8 & $ % 0.1uF 12 11 10 9 8 7 6 5 27 26 23 25 4 28 3 31 2 30 1 A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 24 29 22 OE WE CS H M 6 28512 30 31 I/O0 I/O1 I/O2 I/O3 I/O4 I/O5 I/O6 I/O7 13 14 15 17 18 19 20 21 " " & $ & $ % # " MVCC1 C9 & $ % # A20 0.1uF 21 20 19 18 17 16 15 14 8 7 36 6 5 4 3 2 1 40 13 37 38 A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 24 10 9 22 OE RST WE CE DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 25 26 27 28 32 33 34 35 RY/BY 12 VCC VCC OE WE CS " " VCC 24 29 22 13 14 15 17 18 19 20 21 " & $ N.C. VCC3 C10 0.1uF U4 GND GND Q3 I/O0 I/O1 I/O2 I/O3 I/O4 I/O5 I/O6 I/O7 GND R7 10K A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 GND VCC3 12 11 10 9 8 7 6 5 27 26 23 25 4 28 3 31 2 30 1 16 A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 VCC 32 U3 32 MVCC1 16 MVCC2 nRstOut 23 39 nPSEn A M 2 9LV017D nWr nRAM2En 1 2 3 4 RST CEI GND MR CEO Batt Out Vcc MAX6365PKA U5 8 7 6 5 nFlashEn MVCC2 VCC3 C11 U6 0.1uF nRAM1En nResetIn 1 2 3 4 RST CEI GND MR VBat CEO Batt Out Vcc MAX6365PKA 8 7 6 5 MVCC1 VCC3 C13 C12 Copyright (c) 2003 Dallas Semiconductor / Maxim BT1 TINI-400 memory 0.1uF 0.1uF 3V Lithium A TINI-400 Tuesday, February 12, 2002 2 3 C15 1.0uF VCC3 nResetIn nRAM2En A13 A16 1 2 3 4 A15 A17 nPSEn A20 A19 OUT1 OUT2 SET GND A11 U7 A9 IN IN RST SHDN VCC3 A14 MAX1792EUA18 A8 C19 47uF 8 7 6 5 A10 D6 D7 D5 D3 nFlashEn D4 C20 47uF D2 D1 A4 P14 P15 nRAM1En P13 P12 D0 VCC1 C16 4.7uF A0 A3 A2 A1 A12 P16 P11 P17 nRstOut nEA nStiffPU Int1W P10 CRS TxEn COL R4 10K RxEr RxDV MDC MDIO TxD3 TxD2 TxD0 RxClk R6 10 DN1 RxD0 Q1 BSS84 TxClk C14 0.1uF TxD1 RxD1 RxD2 RxD3 R5 2.2K B A T 5 4S P30 Q2 DIMM144 ALE P32 nPCE1 2 VPullup 2N7002 P31 P53 nPCE2 P52 Local1W nRd 1 nWr U9 P33 nPCE0 DATA GND nPCE3 DS2502 P51 P50 A18 nCE3 nCE2 nCE1 P67 nCE0 nCE7 nCE5 A5 Y2 32KHz C18 0.1uF A6 VBat nCE4 C17 nCE6 SClk VCC3 P66 A21 0.1uF A7 1 2 U8 GND DS1672U-33 X1 X2 4 SCL VBAT VCC VPullup 6 Local1W 3 8 SDA RST 5 7 SDa 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 VCC3 J1 TINI-400 Connector TINI-400 3 Copyright (c) 2003 Dallas Semiconductor / Maxim B Tuesday, February 12, 2002 Pin1 Pin2 Pin3 Pin4 Pin5 Pin6 Pin7 Pin8 Pin9 Pin10 Pin11 Pin12 Pin13 Pin14 Pin15 Pin16 Pin17 Pin18 Pin19 Pin20 Pin21 Pin22 Pin23 Pin24 Pin25 Pin26 Pin27 Pin28 Pin29 Pin30 Pin31 Pin32 Pin33 Pin34 Pin35 Pin36 Pin37 Pin38 Pin39 Pin40 Pin41 Pin42 Pin43 Pin44 Pin45 Pin46 Pin47 Pin48 Pin49 Pin50 Pin51 Pin52 Pin53 Pin54 Pin55 Pin56 Pin57 Pin58 Pin59 Pin60 Pin61 Pin62 Pin63 Pin64 Pin65 Pin66 Pin67 Pin68 Pin69 Pin70 Pin71 Pin72 Pin73 Pin74 Pin75 Pin76 Pin77 Pin78 Pin79 Pin80 Pin81 Pin82 Pin83 Pin84 Pin85 Pin86 Pin87 Pin88 Pin89 Pin90 Pin91 Pin92 Pin93 Pin94 Pin95 Pin96 Pin97 Pin98 Pin99 Pin100 Pin101 Pin102 Pin103 Pin104 Pin105 Pin106 Pin107 Pin108 Pin109 Pin110 Pin111 Pin112 Pin113 Pin114 Pin115 Pin116 Pin117 Pin118 Pin119 Pin120 Pin121 Pin122 Pin123 Pin124 Pin125 Pin126 Pin127 Pin128 Pin129 Pin130 Pin131 Pin132 Pin133 Pin134 Pin135 Pin136 Pin137 Pin138 Pin139 Pin140 Pin141 Pin142 Pin143 Pin144