Aluminium Electrolytic Capacitors/GUE Discontinued Screw Terminal Type Series:GUE n Features Endurance : +85°C 2000 h Miniaturized size and high-ripple-current product Japan U.S.A n Recommended Applications For general-purpose inverter, power supply for backup system, motor-control inverter n Specifications Category temp. range -25 to + 85°C 350 to 450 V .DC Rated W.V. Range Nominal Cap. Range Capacitance Tolerance 820 to 10000 µ F ±20% (120Hz/+20°C) (µA) or 5 (mA) whichever, smaller, after 5 minutes application of ratedd working voltage at +20°C C:Capacitance(µF) V: W.V. (V.DC) DC Leakage Current 3ﾖCV Dissipation Factor Please see the attached standard products list After 2000 hours application of DC voltage with specified ripple current (< rated DC working voltage ) at +85°C, the capacitor shall meet the following limits. Capacitance change ±20% of initial measured value D.F. < 175 % of initial specified value < initial specified value DC leakage current After storage for 1000hours at +85±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in ìEnduranceî.(With voltage treatment) Endurance Shelf Life n Frequency Correction Factor for Ripple Current Freq.(Hz) φD(mm) W.V.(V) 36 51, 64 77, 90 36 51, 64 77, 90 350 400, 450 50 0.71 0.83 0.85 0.65 0.81 0.85 60 0.79 0.88 0.90 0.74 0.87 0.90 120 1.00 1.00 1.00 1.00 1.00 1.00 300 1.09 1.07 1.05 1.09 1.07 1.05 360 1.10 1.08 1.06 1.10 1.08 1.06 1k 1.15 1.13 1.08 1.16 1.13 1.11 10k to 1.21 1.20 1.20 1.22 1.21 1.20 n Dimensions in mm(not to scale) M5x12 Hexagonal-bolt Vent φD 36 51 64 77 90 φD±1 F±1.0 P.V.C. sleeve L+4 max F 13.0 22.0 28.6 31.8 31.8 9 max n Mounting clamp Type 1; φ36 Type 2 Type 3 14 120° H 8.4 E 6 2 φD 16 C 35° 59 max 48±1 30° 2 10 x 5 44±1 a 6m B A 45° 12 0° 1 φD 2-3.5x7 W1 W2 (mm) (mm) φD 51 64 77 A B C 80.0 68.0 57.5 93.0 81.0 70.0 104.5 93.5 90.0 E H max 4.4 13 5.0 13 5.0 13 φD 51 64 77 90 φD1 φD2 65.0 74.0 76.0 86.0 89.0 100.0 101.6 113.0 W1 9.0 8.0 8.0 8.0 W2 14.0 13.0 14.0 14.0 Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail. Mar. 2005 – EE185 – Aluminium Electrolytic Capacitors/GUE n Standard Products W.V. Cap. 400 450 Terminal Pitch Part No. (mm) (mm) 36 125 3.36 0.25 13.0 ECOG2VU102M( ) N F 51 65 3.36 0.25 22.0 ECOG2VU102R( ) N C F 1200 51 75 3.69 0.25 22.0 ECOG2VU122L( ) Y D P 1500 51 96 4.53 0.25 22.0 ECOG2VU152K( ) Y D P 1800 51 96 4.98 0.25 22.0 ECOG2VU182K( ) Y D P 2200 51 103 5.91 0.25 22.0 ECOG2VU222K( ) N C F (µF) 1000 350 Specification Ripple D.F. current (120Hz) (120Hz) (+85°C) (+20°C) (A) Length (±20%) (V) Case size Dia. ( ):Mounting Clamp No (mm) 2point 3 point clamp clamp 2700 51 125 6.90 0.25 22.0 ECOG2VU272J( ) N C F 3300 64 103 7.95 0.25 28.6 ECOG2VU332G( ) N C F 3900 64 125 9.09 0.25 28.6 ECOG2VU392F( ) N C F 4700 64 145 9.55 0.25 28.6 ECOG2VU472E( ) N C F 77 96 9.55 0.25 31.8 ECOG2VU472T( ) Y D P 5600 77 125 11.49 0.25 31.8 ECOG2VU562D( ) N C F 6800 77 145 13.56 0.25 31.8 ECOG2VU682C( ) N C F 8200 77 145 14.91 0.25 31.8 ECOG2VU822C( ) N C F 10000 90 150 16.83 0.25 31.8 ECOG2VU103A( ) N 1000 51 75 3.36 0.25 22.0 ECOG2GU102L( ) Y D P 1200 51 96 4.05 0.25 22.0 ECOG2GU122K( ) Y D P 1500 51 96 4.53 0.25 22.0 ECOG2GU152K( ) Y D P 1800 51 103 5.34 0.25 22.0 ECOG2GU182K( ) N C F 2200 51 125 6.21 0.25 22.0 ECOG2GU222J( ) N C F 2700 64 103 7.20 0.25 28.6 ECOG2GU272G( ) N C F F 3300 64 125 8.37 0.25 28.6 ECOG2GU332F( ) N C F 3900 64 145 8.74 0.25 28.6 ECOG2GU392E( ) N C F 77 96 8.74 0.25 31.8 ECOG2GU392T( ) Y D P 4700 77 125 10.53 0.25 31.8 ECOG2GU472D( ) N C F 5600 77 145 12.30 0.25 31.8 ECOG2GU562C( ) N C F 6800 77 145 13.56 0.25 31.8 ECOG2GU682C( ) N C F 8200 90 150 15.90 0.25 31.8 ECOG2GU822A( ) N F 820 51 75 3.06 0.25 22.0 ECOG2WU821L( ) Y D P 1000 51 96 3.72 0.25 22.0 ECOG2WU102K( ) Y D P 1200 51 96 4.05 0.25 22.0 ECOG2WU122K( ) Y D P 1500 51 125 5.13 0.25 22.0 ECOG2WU152J( ) N C F 1800 64 96 5.75 0.25 28.6 ECOG2WU182G( ) Y D P 2200 64 103 6.60 0.25 28.6 ECOG2WU222G( ) N C F 2700 64 125 7.56 0.25 28.6 ECOG2WU272F( ) N C F 3300 64 145 8.40 0.25 28.6 ECOG2WU332E( ) N C F 77 103 8.40 0.25 31.8 ECOG2WU332T( ) N C F 3900 77 125 9.57 0.25 31.8 ECOG2WU392D( ) N C F 4700 77 145 11.28 0.25 31.8 ECOG2WU472C( ) N C 5600 90 150 13.41 0.25 31.8 ECOG2WU562A( ) N F 6800 90 150 14.46 0.25 31.8 ECOG2WU682A( ) N F F Endurance : 85°C 2000h Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail. Mar. 2005 – EE186 –