Aluminum Electrolytic Capacitor/FB Radial Lead Type Series: FB A Type : Japan Malaysia China ■ Features Endurance: 105°C 1000 h(φ5 to φ8) 105°C 2000 h(φ10 to φ18) Low impedance ■ Specifications -55 to + 105°C Category temp. range Rated W.V. Range Nominal Cap. Range 10 to 50 V .DC 0.47 to 10000 µ F Capacitance Tolerance DC Leakage Current Dissipation Factor Endurance Shelf Life ±20 % (120Hz/+20°C) I < 0.01 CV or 3(µ A) after 2 minutes Please see the attached standard products list After following life test with DC voltage and +105±2°C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage), the capacitors shall meet the limits specified bellow. Duration : 1000 hours (φ5 to 8), 2000hours (φ10 to 18) Post test requirementat +20 °C Capacitance change ±20% of initial measured value D.F. < 200 % of initial specified value DC leakage current < initial specified value After storage for 1000hours at +105±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in “Endurance”.(With voltage treatment) ■ Frequency correction factor for ripple current W.V. Cap. (µF) (V.DC) 10 to 50 0.47 to 330 390 to 1000 1200 to 2200 2700 to 10000 60 0.55 0.70 0.75 0.80 Frequency(Hz) 120 1k 10k 0.65 0.85 0.90 0.75 0.90 0.95 0.80 0.90 0.95 0.85 0.95 1.00 100k 1.0 1.0 1.0 1.0 ■ Dimensions in mm (not to scale) φ8> φ10< φd±0.05 P± 0.5 (>6.3mmdia) Vent P± 0.5 P.V.C. Sleeve L L <16:L+1.0 max L >20:L+2.0 max 14 min Body Dia. φD 5 6.3 8 10 Body Length L Lead Dia. φd φD+0.5 max φD+0.5 max 3min 12.5 16 18 20 to25 30 to 40 0.5 0.5 0.6 0.6 0.6 0.8 0.8 0.8 Lead space P 2.0 2.5 3.5 5.0 5.0 5.0 7.5 7.5 Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and /or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail. Mar. 2005 – EE75 – Aluminium Electrolytic Capacitors/FB ■ Standard Products Specification Lead Length ImpedRipple Lead Space Lead Dia. Length ance Endurcurrent (±20%) Dia. Straight Taping Taping ance (100kHz) (100kHz) ❉H (+105°C) (+20ûC) ❉B (µF) ( m m ) ( m m ) (m A ) (hours) ( m m ) ( m m ) ( m m ) ( m m ) (Ω) Case size W.V. Cap. 82 5 11 160 1.30 120 5 15 210 0.920 1000 180 6.3 11.2 260 0.590 1000 270 6.3 15 350 0.40 1000 330 8 11.5 400 0.330 1000 Straight Taping Leads (pcs) (pcs) 200 2000 2.0 5.0 2.5 EEUFB1A820( ) 0.5 2.0 5.0 2.5 EEUFB1A121( ) 200 2000 0.5 2.5 5.0 2.5 EEUFB1A181( ) 200 2000 0.5 2.5 5.0 2.5 EEUFB1A271( ) 200 2000 0.6 3.5 5.0 EEUFB1A331( ) 200 1000 390 10 12.5 520 0.260 2000 0.6 5.0 5.0 EEUFB1A391( ) 200 500 8 15 500 0.240 1000 0.6 3.5 5.0 EEUFB1A471( ) 200 1000 560 8 20 650 0.180 1000 0.6 3.5 5.0 EEUFB1A561L( ) 200 1000 10 16 640 0.210 2000 0.6 5.0 5.0 EEUFB1A561( ) 200 500 10 20 860 0.130 2000 0.6 5.0 5.0 EEUFB1A821( ) 200 500 5.0 EEUFB1A122 200 EEUFB1A152L 100 1200 10 25 1000 0.110 2000 0.6 5.0 1500 10 30 1150 0.090 2000 0.6 5.0 1800 12.5 20 1120 0.086 2000 0.6 5.0 5.0 EEUFB1A182( ) 200 500 2200 12.5 25 1350 0.070 2000 0.6 5.0 5.0 EEUFB1A222( ) 200 500 2700 12.5 30 1560 0.062 2000 0.8 5.0 EEUFB1A272 100 3300 12.5 35 1780 0.050 2000 0.8 5.0 EEUFB1A332L 100 16 20 1380 0.072 2000 0.8 7.5 12.5 40 1980 0.043 2000 0.8 5.0 3900 4700 6800 8200 16 0.5 Min. Packaging Q'ty 470 820 10 1000 Part No. 7.5 EEUFB1A332( ) 100 EEUFB1A392L 100 250 16 25 1600 0.060 2000 0.8 7.5 7.5 EEUFB1A392( ) 100 250 18 20 1600 0.062 2000 0.8 7.5 7.5 EEUFB1A392S( ) 100 250 EEUFB1A472 100 7.5 EEUFB1A472S( ) 100 16 31.5 1850 0.052 2000 0.8 7.5 18 25 1860 0.052 2000 0.8 7.5 16 35.5 2040 0.044 2000 0.8 7.5 EEUFB1A682L 100 18 31.5 2050 0.046 2000 0.8 7.5 EEUFB1A682 50 250 16 40 2320 0.036 2000 0.8 7.5 EEUFB1A822L 100 18 35.5 2250 0.040 2000 0.8 7.5 EEUFB1A822 50 10000 18 40 2470 0.036 2000 0.8 7.5 EEUFB1A103 50 56 5 11 160 1.30 1000 0.5 2.0 5.0 2.5 EEUFB1C560( ) 200 2000 82 5 15 210 0.920 1000 0.5 2.0 5.0 2.5 EEUFB1C820( ) 200 2000 120 6.3 11.2 260 0.590 1000 0.5 2.5 5.0 2.5 EEUFB1C121( ) 200 2000 180 6.3 15.0 350 0.40 1000 0.5 2.5 5.0 2.5 EEUFB1C181( ) 200 2000 220 8 11.5 400 0.330 1000 0.6 3.5 5.0 EEUFB1C221( ) 200 1000 270 10 12.5 520 0.260 2000 0.6 5.0 5.0 EEUFB1C271( ) 200 500 330 8 15 500 0.240 1000 0.6 3.5 5.0 EEUFB1C331L( ) 200 1000 390 10 16 640 0.210 2000 0.6 5.0 5.0 EEUFB1C391( ) 200 500 470 8 20 650 0.180 1000 0.6 3.5 5.0 EEUFB1C471( ) 200 1000 680 10 20 860 0.130 2000 0.6 5.0 5.0 EEUFB1C681L( ) 200 500 820 10 25 1000 0.110 2000 0.6 5.0 5.0 EEUFB1C821 200 1000 10 30 1150 0.090 2000 0.6 5.0 EEUFB1C102 100 1200 12.5 20 1120 0.086 2000 0.6 5.0 5.0 EEUFB1C122( ) 200 500 1500 12.5 25 1350 0.070 2000 0.6 5.0 5.0 EEUFB1C152( ) 200 500 2200 12.5 30 1560 0.062 2000 0.8 5.0 EEUFB1C222L 100 When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5mm, 7.5mm. H=2.5mm. The taping dimentions are explained on p.25 of our Catalog. Please use it as a reference guide. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail. Mar. 2005 Ñ EE76 Ñ Aluminium Electrolytic Capacitors/FB ■ Standard Products Case size W.V. (V) 16 25 35 Specification Lead Length Part No. Cap. Lead Space Dia. Length Ripple Imped- Endur- Lead ance current (±20%) ance Dia. Straight Taping Taping (100kHz) (100kHz) ❉H ❉B (+105°C) (+20ûC) (hours) ( m m ) ( m m ) (mm) ( m m ) (µF) ( m m ) ( m m ) (m A ) (Ω) 7.5 Min. Packaging Q'ty Straight Taping Leads EEUFB1C222( ) (pcs) (pcs) 100 250 2200 16 20 1380 0.072 2000 0.8 7.5 2700 12.5 35 1780 0.050 2000 0.8 5.0 16 25 1600 0.060 2000 0.8 7.5 3300 12.5 40 1980 0.043 2000 0.8 5.0 18 20 1600 0.062 2000 0.8 7.5 3900 16 31.5 1850 0.052 2000 0.8 7.5 18 25 1860 0.052 2000 0.8 7.5 4700 16 35.5 2040 0.044 2000 0.8 7.5 18 31.5 2050 0.046 2000 0.8 7.5 EEUFB1C472 50 5600 16 40 2320 0.036 2000 0.8 7.5 EEUFB1C562 100 6800 18 35.5 2250 0.040 2000 0.8 7.5 EEUFB1C682 50 8200 18 40 2470 0.036 2000 0.8 7.5 EEUFB1C822 50 7.5 7.5 7.5 EEUFB1C272L 100 EEUFB1C272( ) 100 250 EEUFB1C332L 100 500 EEUFB1C332( ) 100 250 EEUFB1C392 100 EEUFB1C392S( ) 100 EEUFB1C472L 100 250 39 5 11 160 1.30 1000 0.5 2.0 5.0 2.5 EEUFB1E390( ) 200 2000 56 5 15 210 0.920 1000 0.5 2.0 5.0 2.5 EEUFB1E560( ) 200 2000 82 6.3 11.2 260 0.590 1000 0.5 2.5 5.0 2.5 EEUFB1E820( ) 200 2000 120 6.3 15 350 0.40 1000 0.5 2.5 5.0 2.5 EEUFB1E121( ) 200 2000 150 8 11.5 400 0.330 1000 0.6 3.5 5.0 EEUFB1E151( ) 200 1000 180 10 12.5 520 0.260 2000 0.6 5.0 5.0 EEUFB1E181( ) 200 500 220 8 15 500 0.240 1000 0.6 3.5 5.0 EEUFB1E221( ) 200 1000 270 8 20 650 0.180 1000 0.6 3.5 5.0 EEUFB1E271L( ) 200 1000 10 16 640 0.210 2000 0.6 5.0 5.0 EEUFB1E271( ) 200 500 470 10 20 860 0.130 2000 0.6 5.0 5.0 EEUFB1E471L( ) 200 500 560 10 25 1000 0.110 2000 0.6 5.0 5.0 EEUFB1E561 200 680 10 30 1150 0.090 2000 0.6 5.0 EEUFB1E681 100 820 12.5 20 1120 0.086 2000 0.6 5.0 5.0 EEUFB1E821( ) 200 500 5.0 500 1000 12.5 25 1350 0.070 2000 0.6 5.0 1500 12.5 30 1560 0.062 2000 0.8 5.0 16 20 1380 0.072 2000 0.8 7.5 1800 12.5 35 1780 0.050 2000 0.8 5.0 16 25 1600 0.060 2000 0.8 7.5 2200 12.5 40 1980 0.043 2000 0.8 5.0 18 20 1600 0.062 2000 0.8 7.5 2700 16 31.5 1850 0.052 2000 0.8 7.5 18 25 1860 0.052 2000 0.8 7.5 3300 16 35.5 2040 0.044 2000 0.8 7.5 18 31.5 2050 0.046 2000 0.8 7.5 EEUFB1E332 50 3900 16 40 2320 0.036 2000 0.8 7.5 EEUFB1E392L 100 18 35.5 2250 0.040 2000 0.8 7.5 EEUFB1E392 50 4700 18 40 2470 0.036 2000 0.8 7.5 EEUFB1E472 50 7.5 7.5 7.5 7.5 EEUFB1E102( ) 200 EEUFB1E152L 100 EEUFB1E152( ) 100 EEUFB1E182L 100 EEUFB1E182( ) 100 EEUFB1E222L 100 EEUFB1E222( ) 100 EEUFB1E272 100 EEUFB1E272S( ) 100 EEUFB1E332L 100 250 250 250 250 27 5 11 160 1.30 1000 0.5 2.0 5.0 2.5 EEUFB1V270( ) 200 2000 39 5 15 210 0.920 1000 0.5 2.0 5.0 2.5 EEUFB1V390( ) 200 2000 56 6.3 11.2 260 0.590 1000 0.5 2.5 5.0 2.5 EEUFB1V560( ) 200 2000 When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5mm, 7.5mm. H=2.5mm. The taping dimentions are explained on p.33 of our Catalog. Please use it as a reference guide. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail. Mar. 2005 Ñ EE77 Ñ Aluminium Electrolytic Capacitors/FB ■ Standard Products Specification Lead Length ImpedLead Space Ripple Lead EndurDia. Length ance current (±20%) ance Dia. Straight Taping Taping (100kHz) (100kHz) ❉H ❉B (+105°C) (+20ûC) (µF) ( m m ) ( m m ) (m A ) (hours) ( m m ) ( m m ) ( m m ) (Ω) Case size W.V. Cap. 82 35 Min.Packaging Q'ty Straight Leads Taping (pcs) (pcs) 6.3 15 350 0.40 1000 0.5 2.5 5.0 EEUFB1V820( ) 200 2000 100 8 11.5 400 0.330 1000 0.6 3.5 5.0 EEUFB1V101( ) 200 1000 120 10 12.5 520 0.260 2000 0.6 5.0 5.0 EEUFB1V121( ) 200 500 150 8 15 500 0.240 1000 0.6 3.5 5.0 EEUFB1V151( ) 200 1000 180 10 16 640 0.210 2000 0.6 5.0 5.0 EEUFB1V181( ) 200 500 220 8 20 650 0.180 1000 0.6 3.5 5.0 EEUFB1V221( ) 200 1000 500 330 10 20 860 0.130 2000 0.6 5.0 5.0 EEUFB1V331L( ) 200 390 10 25 1000 0.110 2000 0.6 5.0 5.0 EEUFB1V391 200 470 10 30 1150 0.090 2000 0.6 5.0 EEUFB1V471 100 560 12.5 20 1120 0.086 2000 0.6 5.0 5.0 EEUFB1V561( ) 200 500 680 12.5 25 1350 0.070 2000 0.6 5.0 5.0 EEUFB1V681( ) 200 500 1000 12.5 30 1560 0.062 2000 0.8 5.0 EEUFB1V102L 100 1200 1500 1800 2200 2700 3300 16 20 1380 0.072 2000 0.8 7.5 12.5 35 1780 0.050 2000 0.8 5.0 16 25 1600 0.060 2000 0.8 7.5 12.5 40 1980 0.043 2000 0.8 5.0 18 20 1600 0.062 2000 0.8 7.5 16 31.5 1850 0.052 2000 0.8 7.5 18 25 1860 0.052 2000 0.8 7.5 7.5 7.5 7.5 7.5 EEUFB1V102( ) 100 EEUFB1V122L 100 250 EEUFB1V122( ) 100 250 EEUFB1V152L 100 500 EEUFB1V152( ) 100 250 EEUFB1V182 100 EEUFB1V182S( ) 100 16 35.5 2040 0.044 2000 0.8 7.5 EEUFB1V222L 100 18 31.5 2050 0.046 2000 0.8 7.5 EEUFB1V222 50 16 40 2320 0.036 2000 0.8 7.5 EEUFB1V272L 100 18 35.5 2250 0.040 2000 0.8 7.5 EEUFB1V272 50 0.036 18 40 2470 2000 0.8 7.5 5 11 18 47.0 1000 0.5 2.0 5.0 2.5 EEUFB1HR47( ) 200 2000 1 5 11 30 22.0 1000 0.5 2.0 5.0 2.5 EEUFB1H1R0( ) 200 2000 2.2 5 11 45 10.0 1000 0.5 2.0 5.0 2.5 EEUFB1H2R2( ) 200 2000 3.3 5 11 55 6.70 1000 0.5 2.0 5.0 2.5 EEUFB1H3R3( ) 200 2000 4.7 5 11 70 4.70 1000 0.5 2.0 5.0 2.5 EEUFB1H4R7( ) 200 2000 6.8 EEUFB1V332 250 0.47 50 5 11 80 3.20 1000 0.5 2.0 5.0 2.5 EEUFB1H6R8( ) 200 2000 5 11 100 2.20 1000 0.5 2.0 5.0 2.5 EEUFB1H100( ) 200 2000 18 5 11 160 1.30 1000 0.5 2.0 5.0 2.5 EEUFB1H180( ) 200 2000 27 5 15 210 0.920 1000 0.5 2.0 5.0 2.5 EEUFB1H270( ) 200 2000 10 50 2.5 Part No. 39 6.3 11.2 260 0.590 1000 0.5 2.5 5.0 2.5 EEUFB1H390( ) 200 2000 56 6.3 15 350 0.40 1000 0.5 2.5 5.0 2.5 EEUFB1H560( ) 200 2000 68 8 11.5 400 0.330 1000 0.6 3.5 5.0 EEUFB1H680( ) 200 1000 8 82 15 500 0.240 1000 0.6 3.5 5.0 EEUFB1H820L( ) 200 1000 10 12.5 520 0.260 2000 0.6 5.0 5.0 EEUFB1H820( ) 200 500 100 10 16 640 0.210 2000 0.6 5.0 5.0 EEUFB1H101( ) 200 500 120 8 20 650 0.180 1000 0.6 3.5 5.0 EEUFB1H121( ) 200 1000 180 10 20 860 0.130 2000 0.6 5.0 5.0 EEUFB1H181L( ) 200 500 220 10 25 1000 0.110 2000 0.6 5.0 5.0 EEUFB1H221 200 When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5mm, 7.5mm. H=2.5mm. The taping dimentions are explained on p.25 of our Catalog. Please use it as a reference guide. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail. Mar. 2005 Ñ EE78 Ñ Aluminium Electrolytic Capacitors/FB ■ Standard Products Case size W.V. Lead Length Specification ImpedRipple Lead Space Lead Dia. Length Endurcurrent ance (±20%) Dia. Straight Taping Taping ance (100kHz) (100kHz) (+105°C) (+20ûC) ❉H ❉B (µF) ( m m ) ( m m ) (m A ) (Ω) (hours) ( m m ) ( m m ) ( m m ) ( m m ) Cap. 330 470 2000 0.6 5.0 Part No. Min.Packaging Q'ty Straight Taping Leads (pcs) EEUFB1H331L (pcs) 10 30 1150 0.090 100 12.5 20 1120 0.086 2000 0.6 5.0 5.0 EEUFB1H331( ) 200 500 12.5 25 1350 0.070 2000 0.6 5.0 5.0 EEUFB1H471( ) 200 500 560 12.5 30 1560 0.062 2000 0.8 5.0 EEUFB1H561 100 680 12.5 35 1780 0.050 2000 0.8 5.0 EEUFB1H681L 100 16 20 1380 0.072 2000 0.8 7.5 820 12.5 40 1980 0.043 2000 0.8 5.0 7.5 EEUFB1H681( ) 100 EEUFB1H821L 100 250 16 25 1600 0.060 2000 0.8 7.5 7.5 EEUFB1H821( ) 100 250 18 20 1600 0.062 2000 0.8 7.5 7.5 EEUFB1H821S( ) 100 250 16 31.5 1850 0.052 2000 0.8 7.5 18 25 1860 0.052 2000 0.8 7.5 1200 16 35.5 2040 0.044 2000 0.8 1500 16 40 2320 0.036 2000 18 31.5 2050 0.046 2000 1800 18 35.5 2250 0.040 2000 0.8 2200 18 40 2470 0.036 2000 0.8 50 1000 EEUFB1H102 100 EEUFB1H102S( ) 100 7.5 EEUFB1H122 100 0.8 7.5 EEUFB1H152L 100 0.8 7.5 EEUFB1H152 50 7.5 EEUFB1H182 50 7.5 EEUFB1H222 50 7.5 250 When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5mm, 7.5mm. H=2.5mm. The taping dimentions are explained on P.25 of our Catalog. Please use it as a reference guide. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail. Mar. 2005 Ñ EE79 Ñ