ECLIPTEK EH25

EH25 Series
EH25
• Pb-free ceramic SMD package
• 5.0V supply voltage
• HCMOS/TTL output
• Stability to 20ppm
• Available on tape and reel
H 1.6
L 7.0
W 5.0
OSCILLATOR
ELECTRICAL SPECIFICATIONS
Frequency Range
1.000MHz to 155.520MHz
Operating Temperature Range
0°C to 70°C or -40°C to 85°C
Storage Temperature Range
-55°C to 125°C
Supply Voltage (VDD)
5.0VDC ±10%
Input Current
50mA Maximum (Unloaded)
Frequency Tolerance / Stability
Inclusive of all conditions: Calibration Tolerance at 25°C,
±100ppm, ±50ppm, ±25ppm, or
Frequency Stability over the Operating Temperature Range,
±20ppm Maximum
Supply Voltage Change, Output Load Change, First Year
Aging at 25°C, Shock, and Vibration
2.4VDC Minimum
IOH =-16mA
VDD-0.4VDC Minimum
IOH =-16mA
w/TTL Load
0.4VDC Maximum
IOL =+16mA
w/HCMOS Load
0.5VDC Maximum
IOL =+16mA
at 1.4VDC w/TTL Load; at 50% of waveform w/HCMOS
50 ±10(%) (Standard)
Output Voltage Logic High (VOH) w/TTL Load
w/HCMOS Load
Output Voltage Logic Low (VOL)
Duty Cycle (VDD=5.0VDC)
Load (≤70.000MHz)
50 ±10(%) (Standard)
at 50% of waveform w/ TTL Load or w/HCMOS
Load (>70.000MHz)
Rise Time / Fall Time
at 50% of waveform w/TTL Load or w/HCMOS Load
50 ±5(%) (Optional)
0.8VDC to 2.0VDC w/TTL Load or 20% to 80%
6 nSeconds Maximum
of Waveform w/HCMOS Load (≤70.000MHz)
4 nSeconds Maximum
0.8VDC to 2.0VDC w/TTL Load or 20% to 80%
of Waveform w/HCMOS Load (>70.000MHz)
Tri-State Input Voltage
VIH :No Connection
Enables Output
VIH :≥2.2VDC
Enables Output
VIL :≤0.8VDC
Disables Output: High Impedance
Aging (at 25°C)
±5ppm / year Maximum
Start Up Time
10 mSeconds Maximum
Load Drive Capability
≤70.000MHz
10TTL Load or 50pF HCMOS Load Maximum
>70.000MHz
5TTL Load or 15pF HCMOS Load Maximum
Period Jitter: Absolute
±250pSec Maximum, ±100pSec Typical
Period Jitter: One Sigma
±50pSec Maximum, ±30pSec Typical
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
ECLIPTEK CORP.
OSCILLATOR
EH25
CERAMIC
5.0V
OS48
800-ECLIPTEK www.ecliptek.com for latest revision
REV.DATE
02/04
Specifications subject to change without notice.
PART NUMBERING GUIDE
EH25 00 ET T TS - 24.000M TR
FREQUENCY TOLERANCE / STABILITY
00=±100ppm Maximum (Standard), 45=±50ppm Maximum,
25=±25ppm Maximum, 20=±20ppm Maximum
AVAILABLE OPTIONS
Blank=Bulk (Standard)
TR=Tape and Reel
OPERATING TEMP. RANGE
Blank =0ºC to 70ºC, ET=-40°C to 85°C
FREQUENCY
OUTPUT CONTROL FUNCTION
TS=Tri-State
DUTY CYCLE
Blank=50 ±10(%) (Standard), T=50 ±5(%)
MECHANICAL DIMENSIONS
SUGGESTED SOLDER PAD LAYOUT
ALL DIMENSIONS IN MILLIMETERS
ALL DIMENSIONS IN MILLIMETERS
Pin 1: Tri-State
Pin 2: Case Ground
TAPE AND REEL DIMENSIONS
Pin 3: Output
Pin 4: Supply Voltage
Tolerances = ±0.1
ALL DIMENSIONS IN MILLIMETERS
A
B
C
D
E
16+.3-.1
7.5±.1
6.75±.1
4 ±.1
2±.1
REEL
F
G
H
J
K
L
8±.1
B0*
1.5 +.1-0
A0*
.3 ±.05
K0*
F
M
N
O
P
Q
1.5 MIN
50 MIN
20.2 MIN
13±.2
40 MIN
QTY/REEL
1,000
REEL
R
S
T
U
V
2.5 MIN
10 MIN
22.4 MAX
360 MAX
16.4+2-0
*Compliant to EIA 481A
MARKING SPECIFICATIONS
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
Characteristic
Specification
Line 1: ECLIPTEK
Fine Leak Test
Gross Leak Test
Mechanical Shock
Vibration
Lead Integrity
Solderability
Temperature Cycling
Resistance to Soldering Heat
Resistance to Solvents
MIL-STD-883, Method 1014, Condition A
MIL-STD-883, Method 1014, Condition C
MIL-STD-202, Method 213, Condition C
MIL-STD-883, Method 2007, Condition A
MIL-STD-883, Method 2004
MIL-STD-883, Method 2002
MIL-STD-883, Method 1010
MIL-STD-883, Method 210
MIL-STD-883, Method 215
Line 2: XX.XXX M
MANUFACTURER
ECLIPTEK CORP.
CATEGORY
SERIES
PACKAGE
OSCILLATOR
EH25
CERAMIC
800-ECLIPTEK www.ecliptek.com for latest revision
Frequency in MHz (5 Digits Maximum + Decimal)
Line 3: P XX Y ZZ
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
Configuration Designator
VOLTAGE
5.0V
CLASS
OS48
REV.DATE
02/04
Specifications subject to change without notice.