EL1527 ® Data Sheet Dual Channel Medium Power Differential Line Driver The EL1527 is a very low power dual channel differentiated amplifier designed for central office and customer premise line driving for DMT ADSL solutions. This device features a high drive capability of 400mA while consuming only 7.5mA of supply current per amplifier from ±12V supplies. This driver achieves a typical distortion of less than -75dBc, at 1MHz into a 50Ω load. The EL1527 has two control pins, C0 and C1, per channel. With the selection of C0 and C1, the device can be set into full-IS power, 3/4-IS power, 1/2-IS power, and power-down disable modes. The EL1527 maintains excellent distortion and load driving capabilities even in the lowest power settings. The EL1527 is available in the thermally-enhanced 28-pin HTSSOP package. This device is specified for operation over the full -40°C to +85°C temperature range. October 21, 2004 FN7341.1 Features • Drives 360mA at 16VP-P on ±12V supplies • 40VP-P differential output drive into 100Ω • -75dBc typical driver output distortion driving 50Ω at 1MHz and 1/2-IS bias current • Low quiescent current of 3.5mA per amplifier in 1/2-IS mode • Power-down disable mode • Pb-free available (RoHS compliant) Applications • ADSL G.DMT and G.lite CO line driving • G.SHDSL, HDSL2 line driver • ADSL CPE line driving • Video distribution amplifier • Video twisted-pair line driver Ordering Information PART NUMBER Pinout PACKAGE TAPE & REEL PKG. DWG. # EL1527CRE 28-Pin HTSSOP - MDP0048 EL1527CRE-T7 28-Pin HTSSOP 7” MDP0048 EL1527CRE-T13 28-Pin HTSSOP 13” MDP0048 EL1527CREZ (See Note) 28-Pin HTSSOP (Pb-Free) - MDP0048 EL1527CREZ-T7 (See Note) 28-Pin HTSSOP (Pb-Free) 7” MDP0048 EL1527CREZT13 (See Note) 28-Pin HTSSOP (Pb-Free) 13” MDP0048 EL1527 (28-PIN HTSSOP) TOP VIEW VS-(1) 1 C0(1) 2 27 NC C1(1) 3 26 NC INB+(1) 4 25 INA+(1) INB-(1) 5 24 INA-(1) OUTB(1) 6 NOTE: Intersil Pb-free products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020C. Get Full Datasheet VS+(2) 7 NC 8 OUTA(2) 9 23 OUTA THERMAL PAD 22 NC 21 VS+(1) 20 OUTB(2) INA-(2) 10 19 INB-(2) INS+(2) 11 18 INB+(2) NC 12 17 C1(2) NC 13 16 C0(2) GND(2) 14 1 28 GND(1) 15 VS-(2) CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright © Intersil Americas Inc. 2002-2004. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc. All other trademarks mentioned are the property of their respective owners. EL1527 All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems. Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com 2 FN7341.1 October 21, 2004