ISL1571 ® Data Sheet September 3, 2009 FN6387.1 Power Line Communication (PLC) Features The ISL1571 is a dual operational amplifier designed for PLC line driving in OFDM and SSC based solutions. This device features a high drive capability of 750mA while consuming only 6mA of supply current per amplifier and operating from a single 4.5V to 12V supply. The driver achieves a typical distortion of -80dBc, at 150kHz into a 25Ω load. • 21dBm output power capability The ISL1571 is available in the thermally-enhanced 16 Ld QFN or 10 Ld HMSOP package and is specified for operation over the full -40°C to +85°C temperature range. The ISL1571 has control pins BIAS0 and BIAS1 for controlling the bias and enable/disable of the outputs. These controls allow for lowering the power to fit the performance/power ratio for the application. • -80dBc typical driver output distortion at 10MHz The ISL1571 is ideal for line driving applications following the Homeplug 1.0, Homeplug AV and UPA standard based PLC. • 250MHz bandwidth • Drives up to 750mA from a +12V supply • 20VP-P differential output drive into 21Ω • Very low noise floor • -75dBc typical driver output distortion at 4MHz • -79dBc typical driver output distortion at 17MHz • Low quiescent current of 6mA per amplifier • Supply range - For ISL1571IUEZ 4.5V to 12V - For ISL1571IRZ ±2.25V to ±6V, 4.5V to 12V • Thermal shutdown • Pb-free (RoHS compliant) Get Full Datasheet Applications • Homeplug 1.0 • Homeplug AV • UPA digital home standard Ordering Information PART NUMBER (Note) PART MARKING TEMP. RANGE (°C) PACKAGE (Pb-Free) PKG. DWG. # ISL1571IRZ 157 1IRZ -40 to +85 16 Ld QFN MDP0046 ISL1571IRZ-T7* 157 1IRZ -40 to +85 16 Ld QFN (Tape and Reel) MDP0046 ISL1571IUEZ BBBDA -40 to +85 10 Ld HMSOP MDP0050 ISL1571IUEZ-T7* BBBDA -40 to +85 10 Ld HMSOP (Tape and Reel) MDP0050 *Please refer to TB347 for details on reel specifications NOTE: These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100% matte tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. 1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright © Intersil Americas Inc. 2008, 2009. All Rights Reserved. All other trademarks mentioned are the property of their respective owners. ISL1571 All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems. Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com 2 FN6387.1 September 3, 2009