EVERLIGHT 18-225-S2G6C-A01-3T

EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
Chip LED with Bi-Color (Multi-Color)
18-225/S2G6C-A01/3T
Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow
solder process.
․Multi-color type.
․Pb-free.
․The product itself will remain within RoHS
compliant version.
Descriptions
․The 18-225 SMD LED is much smaller than lead
frame type components, thus enable smaller board
size, higher packing density, reduced storage space
and finally smaller equipment to be obtained.
․Besides, lightweight makes them ideal for
miniature applications. etc.
Applications
․Backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in
telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
Device Selection Guide
Chip
Type
Material
Emitted Color
S2
AlGaInP
Brilliant Orange
G6
AlGaInP
Brilliant Yellow Green
Resin Color
Water Clear
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev 2
Page: 1 of 11
Device No: DSE-0000520
Prepared date: 09-Dec-2008
Prepared by: Esther Yan
EVERLIGHT ELECTRONICS CO.,LTD.
18-225/S2G6C-A01/3T
Package Outline Dimensions
1.6
4
0.8
2
Orange
4 -
Yellow
Green
3 -
UYO
SYG
0.5
+ 1
Polarity
1
3
+ 2
For Reflow Soldering(Propose)
0.7
0.4
0.3
0.4
0.8
0.5
0.5
Cathode Mark
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev 2
Page: 2 of 11
Device No: DSE-0000520
Prepared date: 09-Dec-2008
Prepared by: Esther Yan
EVERLIGHT ELECTRONICS CO.,LTD.
18-225/S2G6C-A01/3T
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Rating
Unit
Reverse Voltage
VR
5
V
Forward Current
IF
S2:25
mA
G6:25
S2:60
Peak Forward Current
IFP
mA
G6:60
(Duty 1/10 @1KHz)
S2:60
Power Dissipation
Pd
mW
Electrostatic Discharge(HBM)
ESD
2000
V
Operating Temperature
Topr
-40 ~ +85
℃
Storage Temperature
Tstg
-40 ~ +90
℃
Soldering Temperature
Tsol
G6:60
Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev 2
Page: 3 of 11
Device No: DSE-0000520
Prepared date: 09-Dec-2008
Prepared by: Esther Yan
EVERLIGHT ELECTRONICS CO.,LTD.
18-225/S2G6C-A01/3T
Electro-Optical Characteristics (Ta=25℃)
Parameter
Luminous Intensity
Viewing Angle
Peak Wavelength
Symbol
Min.
Typ.
S2
32.0
48.0
G6
16.0
24.0
-----
120
IV
2θ1/2
λp
S2
-----
G6
Dominant Wavelength
Λd
S2
G6
Spectrum Radiation
Bandwidth
Forward Voltage
△λ
S2
G6
VF
S2
G6
Reverse Current
IR
-----
-----
611
575
605
573
17
20
Max.
Unit
Condition
-----
mcd
IF=20mA
-----
deg
IF=20mA
-----
nm
IF=20mA
-----
nm
IF=20mA
-----
nm
IF=20mA
1.7
1.7
2.0
2.0
2.4
2.4
V
IF=20mA
-----
-----
10
μA
VR=5V
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev 2
Page: 4 of 11
Device No: DSE-0000520
Prepared date: 09-Dec-2008
Prepared by: Esther Yan
EVERLIGHT ELECTRONICS CO.,LTD.
18-225/S2G6C-A01/3T
Typical Electro-Optical Characteristics Curves
S2
Spectrum Distribution
Forward Current vs.
Forward Voltage
Ta=25°C
Forward Current
Wavelength λ (nm)
Relative luminous intensity (%)
I F(mA)
Ta=25°C
Forward Voltage VF (V)
Luminous Intensity vs.
Forward Current
Ta=25°C
Luminous Intensity vs.
Relative luminous intensity (% )
Relative luminous intensity (% )
Ambient Temperature
Ambient Temperature Ta (°C)
Radiation Diagram
Ta=25°C
Forward Current
IF(mA)
Forward Current Derating Curve
Forward Current I F (mA)
Ambient Temperature Ta (°C)
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev 2
Page: 5 of 11
Device No: DSE-0000520
Prepared date: 09-Dec-2008
Prepared by: Esther Yan
EVERLIGHT ELECTRONICS CO.,LTD.
18-225/S2G6C-A01/3T
Typical Electro-Optical Characteristics Curves
G6
Forward Current vs.
Forward Voltage
Spectrum Distribution
Ta=25°C
Forward Current
Relative luminous intensity (%)
IF(mA)
Ta=25°C
Forward Voltage VF (V)
Wavelength λ (nm)
Luminous Intensity vs.
Forward Current
Ta=25°C
Luminous Intensity vs.
Relative luminous intensity (% )
Relative luminous intensity (% )
Ambient Temperature
Ambient Temperature Ta (°C)
Radiation Diagram
IF(mA)
Ta=25°C
Forward Current
IF(mA)
Forward Current Derating Curve
Forward Current
Ambient Temperature Ta (°C)
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev 2
Page: 6 of 11
Device No: DSE-0000520
Prepared date: 09-Dec-2008
Prepared by: Esther Yan
EVERLIGHT ELECTRONICS CO.,LTD.
18-225/S2G6C-A01/3T
Label Explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Pb
EVERLIGHT
CPN :
P N : XXXXXXXXXXXXX
RoHS
XXXXXXXXXXXXX
CAT : XXX
HUE : XXX
REF : XXX
QTY : XXX
LOT NO : XXXXXXXXXX
Reference : XXXXXXXX
MADE IN TAIWAN
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev 2
Page: 7 of 11
Device No: DSE-0000520
Prepared date: 09-Dec-2008
Prepared by: Esther Yan
EVERLIGHT ELECTRONICS CO.,LTD.
18-225/S2G6C-A01/3T
Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel
-
-
+
+
Note: The tolerances unless mentioned is ±0.1mm,Unit = mm
Moisture Resistant Packaging
Label
Aluminum moisture-proof bag
Desiccant
Label
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev 2
Page: 8 of 11
Device No: DSE-0000520
Prepared date: 09-Dec-2008
Prepared by: Esther Yan
EVERLIGHT ELECTRONICS CO.,LTD.
18-225/S2G6C-A01/3T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level:90%
LTPD:10%
Test
Sample
Hours/Cycles
Size
No.
Items
Test Condition
1
Reflow Soldering
Temp. : 260℃±5℃
Min. 5sec.
6 Min.
22 PCS.
0/1
Temperature Cycle
H : +100℃ 15min
∫ 5 min
L : -40℃ 15min
300 Cycles
22 PCS.
0/1
Thermal Shock
H : +100℃ 5min
∫ 10 sec
L : -10℃ 5min
300 Cycles
22 PCS.
0/1
Temp. : 100℃
1000 Hrs.
22 PCS.
0/1
Temp. : -40℃
1000 Hrs.
22 PCS.
0/1
2
3
4
5
High Temperature
Storage
Low Temperature
Storage
Ac/Re
6
DC Operating Life
IF = 20 mA
1000 Hrs.
22 PCS.
0/1
7
High Temperature /
High Humidity
85℃/ 85%RH
1000 Hrs.
22 PCS.
0/1
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev 2
Page: 9 of 11
Device No: DSE-0000520
Prepared date: 09-Dec-2008
Prepared by: Esther Yan
EVERLIGHT ELECTRONICS CO.,LTD.
18-225/S2G6C-A01/3T
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev 2
Page: 10 of 11
Device No: DSE-0000520
Prepared date: 09-Dec-2008
Prepared by: Esther Yan
EVERLIGHT ELECTRONICS CO.,LTD.
18-225/S2G6C-A01/3T
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of
the hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev 2
Page: 11 of 11
Device No: DSE-0000520
Prepared date: 09-Dec-2008
Prepared by: Esther Yan