EMP-1.2K Lithium-Niobate Fiber Optic Gyroscopes DATASHEET | APRIL 2012 PHOTONICS SYSTEMS Precision Fiber Optic Gyroscopes Features Separate Electronics and Sensor Modules EMCORE’s long standing leadership in development of highly-accurate defense and military grade fiber optic components and systems is what makes the EMP1.2K a clear choice when selecting solid-state precision gyroscope components. With fully integrated optics and electronics, the EMP-1.2K is a superior device in regards to weight and form-factor. It features advanced optics and digital signal processing (DSP) for much higher accuracy, lower noise and greater efficiency. The integrated DSP also improves optical drift stability, higher linearity and greater environmental flexibility. Additionally, the unit can be calibrated internally for better thermal effect. Separation of the electronics from the FOG’s sensing coil assembly provides widest variety of installation flexibility. Advanced Optics and DSP Electronics for Higher Accuracy, Lower Noise and Greater Efficiency Suitable for Demanding Applications DSP Based Closed Loop Design for Improved Drift Stability, Higher Linearity and Greater Flexibility The EMP-1.2K’s low drift and noise makes this gyro ideal for demanding applications such as: Versions with Internal Calibration Including Thermal Effects Can Be Made Available Precision Navigation (1 mile/hr without GPS) 500 Hz Bandwidth Low noise line-of-sight stabilization and control Customizable Performance for a Wide Range of Applications Specifications Drift Stability, Short Term 0.005°/hr Drift Stability, Long Term 0.01°/hr Noise 0.0015°/ √ hr Scale Factor Stability: 50 ppm Fast, Precise Gyrocompassing to milli radian Customizable Gyroscope Platform EMP FOG technology is cost effective and customizable for a wide range of applications encompassing drift rate and noise from 0.001°/hr and 0.0005°/√ hr respectively. Mechanical Diagram Scale Factor Linearity: 25 ppm Maximum Rate 1,000°/sec Size: Sensor 3.3”Dx1.0”; Electronics 3.2” x 3.2” x 0.8” Digital I/O +5V Power Electronics Module** Sensor Module **The electronics module form factor may be customized for particular applications. US Patent No. 7,746,476. | REV 2012.04 Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.