LITHIUM / THIONYL CHLORIDE ER14335 I RE G ST FI RM BSI E RED BRIEF SPECIFICATION Model: ER14335 Bobbin design Nominal Voltage: 3.6V Nominal Capacity: 1.65Ah Standard Discharge Current: 0.5mA Weight: About 12g Stainless steel container with PVC wrap Stainless steel positive cap ISO9002 Certified Non dangerous for transportation EEMB Lithium / Thionyl Chloride Products Abstracts Edition V Jan.2001 Positive Tab Glass-to-Metal seal Positive Cap Plastic Washer Current Collector Top Insulator (fiberglass) Lithium Anode Separator (fiberglass) Carbon Electrode and Electrolyte (SOCl 2) Stainless steel Can Bottom Insulator (fiberglass) Http://eemb.com E-mail:[email protected] EEMB Lithium / Thionyl Chloride Products Abstracts Edition V Jan.2001 EEMB ER14335 CYLINDRICAL STANDARD SPECIFICATION 1. SUBJECT 2. GENERAL FEATURES AND APPLICATIONS 3. GENERAL SPECIFITIONS 4. VISUAL ASPECT 5. PRECAUTIONS IN USING 6. STORAGE AND MOUNT 7. SAFETY 8. BATTERY CHARATERISTICS 9. UNTAGGED BATTERY DIMENSIONS 10. TABS 1. SUBJECT This specification presents typical and guaranteed ex-work values of the Lithium / Thionyl Chloride Cylindrical battery, of Model ER14335. Lithium / Thionyl Cylindrical battery (Li-Thionyl) is used for the active cathode material, and high voltage, high activity lithium metal for the anode material. 2. LI / Thionyl Cylindrical battery FEATURES AND APPLICATIONS Features: High Voltage and High Energy Density Excellent Stable Discharge Characteristics Outstanding Temperature Characteristics Excellent Leakage Resistance Http://eemb.com E-mail:[email protected] EEMB Lithium / Thionyl Chloride Products Abstracts Edition V Jan.2001 Excellent Long-term Reliability and Long Shelf-life Applications: Water meters Gas meters Kilowatt per-hour meters Electronic Packing meters PC real-time clocks Medical Equipment CMOS memory backup 3. GENERAL SPECIFICATION 3.1 Model ER14335. 3.2 Nominal Voltage: 3.6 Volts 3.3 Capacity: 1.65Ah (@0.5mA Discharge Current, +23oC) 3.4 Standard Discharge Current 0.5mA 3.5 Maximum recommended current under continuous discharge: 65mA 3.6 Maximum recommended current under pulse discharge: 150mA 3.7 Operational temperature range: -55oC ~ +85 oC 3.8 Nominal Weight: About 12g Note: 1. For high rate discharge, the maximum operational temperature has to be lowered 2. Battery potential and battery capacity is function of both current drain and temperature. Http://eemb.com E-mail:[email protected] EEMB Lithium / Thionyl Chloride Products Abstracts Edition V Jan.2001 4. VISUAL ASPECT The cell must not show any trace of Dents Bulging Leakage Corrosion 5. PRECAUTIONS IN USING To use these batteries efficiently, strictly observe the following precautions. Use Nickel-plated iron or stainless steel for the terminals that contact the battery. Make sure that terminal contact pressure is 50g minimum, for a stable contact. Keep the battery and contact terminal surfaces clean and free from moisture and foreign matter. Before inserting the battery, check the battery contact terminals to make sure they are normal, not bent or damaged. (Bent terminals may not make good contact with the battery or may cause it to short circuit.) When the batteries are piled up in a disorderly way, their positive and negative terminals may short-circuit, consuming some batteries while charging others, causing them to explode. Lithium batteries that are almost exhausted can output a voltage that is almost the same as that of a new battery: Please does not judge a battery only with a Voltmeter. Avoid using a mixture of old and new batteries; replace all batteries in a set with new one. !Lithium batteries require a period of time to reach their normal voltage again after even a slight short circuit. Therefore, should the battery is short-circuited, wait an adequate long time for batteries to recover before measuring their electrical characteristics. Use a high impedance (1M or higher) voltmeter to measure battery voltage. Http://eemb.com E-mail:[email protected] EEMB Lithium / Thionyl Chloride Products Abstracts Edition V Jan.2001 Battery characteristics vary with type and grade, even when batteries are the same size and shape. When replacing batteries with new ones, be sure to carefully check the symbols and numbers 6. STORAGE AND MOUNT The battery should be preferably stored in dry and cool conditions. Storage at high temperature must be avoided to preserve the battery life time. 7. SAFETY Battery Handing Precautions to Ensure Complete Safety Lithium batteries contain inflammable materials, such as lithium and organic solvents. Improper battery handing, particularly during transit and storage, may cause heating, explosions and fires. Please strictly observe the precautions below in handing lithium batteries. WARNING! 1. DO NOT recharge, short-circuit, disassemble, deform, heat or place the battery near a direct flame. This battery contains flammable materials such as lithium and organic solvent and performing any of the above actions could cause it to ignite explode or become damaged. 2. Keep this battery out of the reach of children. If it is swallowed, contact a physician immediately. 3. When storing the battery or throwing it away, be sure to cover it with tape. If the battery comes into contact with other metal objects, it could ignite or become damaged. CAUTION! Closely observe the following precautions. If the battery is used incorrectly, it could leak or become damaged, causing device trouble or injury. 1. Insert the battery with the "+" and "-" ends correctly oriented. 2. If the battery is used together with new batteries, do not use it with a different type of battery. 3. Do not apply solder directory to the battery. 4. Avoid storing the battery in direct sunlight, or in excessively hot and humid locations. Http://eemb.com E-mail:[email protected] EEMB Lithium / Thionyl Chloride Products Abstracts Edition V Jan.2001 8. BATTERY CHARATERISTICS STARDAND Nominal Capacity: The capacity that tested at standard discharge current condition, +23 oC temperature, and 2.0V end Voltage o Current Value: In the condition of +23 C and 2.0V end Voltage, the Max. Current Value that gets 50% of Nominal Capacity. ER14335 Energy Type 4.0 Voltage(V) 3.5 3.0 2.5 2.0 50mA (0.4Ah) 1.5 1.0 0.1 1 10 15mA 5mA 1mA 200 A 50 A (1.10Ah)(1.35Ah) (1.45Ah) (1.30Ah) (1.25Ah) 10 2 10 3 10 4 10 5 HOURS Discharge Characteristics On Temperature Capacity(Ah) 2.0 1.5 5mA 200 A 15mA 1.0 0.5 0.0 Temperature( C) Http://eemb.com E-mail:[email protected] EEMB Lithium / Thionyl Chloride Products Abstracts Edition V Jan.2001 9. UNTAGGED BATTERY DIMENSIONS 6mm 33.5mm 14.5mm Http://eemb.com E-mail:[email protected] EEMB Lithium / Thionyl Chloride Products Abstracts Edition V Jan.2001 10. TABS & LEADS EEMB Company Limited can provide following tabs and leads with the battery, Customer design welcomed. Figure 1 L H1 D Black Red D 6 Figure 2 H1 Figure 3 L H1 D Black Red H1 5 4 5 4 D Figure 4 0.3 H2 0.75 0.75 H1 D 5 5 Figure 5 0.2 0.2 0.75 7.45 H2 0.75 Http://eemb.com E-mail:[email protected] EEMB Lithium / Thionyl Chloride Products Abstracts Edition V Jan.2001 11. HIGH TEMPERATURE MODEL ER14335S EEMB ALSO PROVIDE HIGH TEMPERATURE MODEL ER14335S Features: Stable Operational Voltage EEMB battery ensures stable voltage at a high temperature and o o features a wide operational temperature range: -40 C to +150 C High Cell Voltage EEMB battery features a voltage of 3.6V, small volume and high energy densities. Long Storage Life EEMB battery has a proven ability to be shelved 5~10 years at the normal room temperature. Excellent Hermetically-Sealed Structure Specification: Model: Max. Dimension Nominal Voltage Standard Discharge Current Max. Pulse Discharge Current Capacity Working Temperature Range ER14335S 14.5 33.5 3.6V 20.0mA 50mA 1100mAh o o -40 C to +150 C For Any Questions, Please Contact Engineering Office, EEMB Company Limited. For Any Questions, Please Contact Engineering Office, EEMB Company Limited. Http://eemb.com E-mail:[email protected]